sPOD Install & Review - 8 Circuit SE - Jeep JK

[@rbuste]

I bought mine about 2 years ago, an original 6 circuit model. Waited for a nice discount from Krawl. Nice upgrade for adding electrical without messing with the vehicle wiring. It keeps the can bus gremlins from coming around.

[@funkydodo149]

LOL, you picked a guy to help you that hate wiring... Good one, it actually shows how easy it is to install the sPOD (anybody can do it). Glad to see videos again of the club Jeep project.

[@TrailRecon]

He and I hate wiring equally! Love how simple this system is to install and how simple it makes furniture additions!

[@funkydodo149]

TrailRecon: yea the SPOD also keep wire clutter to a minimium, it is a good edition to any Jeep.

[@blair_actual]

That cable to hook up the alternate switch pod is called a “Power-Over-Ethernet Cord” or POE. It’s most likely a Cat5 cord as well. Pretty much it’s a cable that’ll let you run a network through and not need a separate power cable, the same used on a lot of security cámara systems! Btw, love the videos, keep it up!

[@Rico460774e]

It's either Cat5 or Cat6 but the pin out is not the same for network so not what is used on security camera systems.

[@JP-ic1fi]

Thanks Brad! I was going back and forth between SPOD, Painless, and SFZ Central Command. This video coupled with your SPOD long term review video sealed the deal. SPOD Dual Lit with custom rockers ordered!

[@expert244]

Thumbs up for the S&W shirt.

[@comingtofull-ageinchrist6736]

another great how to video, Brad! Thanks for sharing so many upgrade videos for the Jeep!

[@moabwheeling]

sPOD sure makes life easier , its on my list.

[@TrailRecon]

Yes they do!

[@xzysyndrome]

“footmen” were attendants who ran beside or behind the carriages of aristocrats. Carriages often had mountains of luggage strapped to the back, most likely with leather. A low, flat loop would be useful in securing the load.

[@ADHomesteading]

sPOD sure has simplified adding accessories. Thank you for the video.

[@Airkoay]

The SPOD has great customer service. One of my rocker switch broke, I call them and they sent me a new cover at no charge, just shipping and handling.

[@EthosAtheos]

Its very cool. But at 800+ USD. I think I will use an Arduino board with relay breakout , a box and some in line fuses. This is a good product but the price is just to over the top for me. I guess if I were building vehicles every day and labor mattered then its not a bad buy. But a days work and some switches and I can replicate all it's functionality at a fraction of the price.

[@insaneTrout]

Not just that but not even waterproof...that price point is too excessive for not being water proof and having to cut your vehicle up..

[@utahboy17]

Rough country MLC6 controller 200.00.

[@jchobgood]

Great instructions - thank you! Made it easy!

[@HoosierDaddy_]

A true must have. Looks very well put together.

[@TrailRecon]

It's a great system, especially if you know you will be running multiple auxiliary items.

[@justinc1611]

I want & need one SO BAD!!!!

[@jasoncottingham6573]

Great video! I was thinking of buying this system. After your review and install, I think this is a must have. Thanks for the video!

[@TrailRecon]

It has made my life so convenient!

[@jomero1808]

Excellent information like on every video. I'm just collecting ideas and techniques for my own JKU. The only thing is that the hole in the firewall is where my clutch pump seats, I will try to find another way to pass that wire before making the purchase

[@Ompa235]

Definitely on my build list!

[@TrailRecon]

It's a great piece of gear to do early on in any project!

[@TheBeardedJeeper]

Wish I could afford one of these. It would make wiring so much easier!

[@utahboy17]

I bought the mlc6 controller .6 switches 200.00. looks alot like the Spod.

[@glynnbaker5448]

Really good video guys, awesome stuff. I have to say though your friend there looks very similar to Chris Kyle the American Sniper dude.

[@TrailRecon]

Hour going to give Matt a big head! lol!! Thanks!

[@TJ-hd5ym]

Thanks mine just came in today

[@onlyychevys]

What am I missing here? $720.00 for this and everyone loves it? WOW, I will just wire my stuff the way I always have. Works fine for a very small fraction of that price!

[@axelrod21]

It all depends on your preference. I am willing to install it for the convenance and clean look without a spagettil of cables. :) You do you though :)

[@hellsrangers1]

There are much cheaper versions of this that cost like 120. I love idea but one I have an xj and 2 its definitely not worth 720 dollars

[@canadaplace2be176]

But u would by tire and rims for 3000??

[@myytchannel6632]

Lol, that is why they sell Bugatti Veyron and they sell Nissan GTR or Nissan Z. Just buy what suits you. Don't worry about people who pay high prices for things you feel do not make sense to you. There are many other things in the world that other people do that do not make sense to you. It is normal. If people were not buying, the company would have filed for bankruptcy. But people are buying like crazy, so business is booming.

[@mylesl2890]

Super cool set of switches would love a set, does seem a bit pricy

[@victoryrider]

I'm a few months away from getting my Jeep. Already planning on what to get to plug into this.

[@KJsProjects]

I want to see more of Matts ZJ. I am finally lifting my 97.

[@johnferlito1973]

Hey thanks for all your videos I need help I have a wrangler JL Manual transmisión and in my fire wall I have like a clutch pump , can you help me to find another way to run cables inside the cabin. Thanks John

[@jeremy8715]

I'm surprised California hasn't banned that Smith & Wesson t-shirt.

[@-kaster--kaster-6090]

Omg right! we’re lucky we can even own a gun here In California .😒

[@pksscuffed]

Legendary comment

[@ryze6726]

Should I run a relay on the positive for key on power to prevent any parasitic draw, or Is it fine

[@Firespyer]

I would plug that other RJ45 jack on the source

[@jr_jeep4470]

Nice share thank you!

[@willieself1]

The sPOD for our new to us 2015 JKUR arrives tomorrow thanks to this video!!!! Brad do you have your winch ran to the sPOD? I understand that the winch draws more amps than the sPOD is rated for, but I'm wanting to use it as a "on/off" switch for the winch. Would love to know how you have your winch set up.

[@hunterharwell6722]

I can only find the switches I can’t find the part for under the hood on the site.

[@armandoperez3303]

Any videos on trail runs in the near future?

[@H.pylori]

I have been waiting for this video for a long time. It is the best step by step install of the sPOD that I have seen on youtube. I, like your friend Matt am hesitant about fooling around with the electrical stuff and pulling off the plastic panels, so what can I do to convince John the mechanic to come to Las Vegas and help me install my own sPOD (smiles)? Thanks for another outstanding TrailRecon video! Question, would I have to remove my front hardtop panels to remove the footman's loop?

[@TrailRecon]

Running wires is one of my least favorite things to do, so I feel you. No you don't have remove the freedom panels, we just did it because it made it easier to see for the video. Thanks!!

[@MrJoshcc600]

Man I can't think of 8 things to fill all those switches with if I wanted too

[@eldedo8927]

OBA Compressor/Front Spots/Front Floods(amber)/Ditch lights/Side working lights(x2), thats 6

[@billdomingo8386]

3 questions from Australia. If you parallel connect another set of 8 switches do you use the same main unit, or do you require an additional main unit? Is it possible to easily have two set of 8 switches next to each other above the windscreen? Is there a touch screen monitor that comes with the sPOD where you can create multiple soft switches, something like the ARB LINX product?

[@josh46354]

Nice Dodgers tat!!!!

[@tylerdurden4248]

Is that the one?........nope! Maybe it’s this one, shit! Ok it’s got too be this one.......FML!!!! Really like the vid guys just wondering where the individual toggle switches are

[@yanglu9555]

Can you guys do the same installment video but for a 4Runner?

[@MrPoseidonSays]

Love the KC lights you have installed above your windshield. I think you have 8. Is that a Kit?

[@myytchannel6632]

The light cost $2,055.99. I hope you buy yours soon. Go to their website to see the price of exactly what he has on his Jeep.

[@EdwardFinance]

Looks so easy, thanks!

[@phonedrn8]

Does the S pod have a current meter option read out of the total system?

[@chrisinportage]

What happens when all those electronics in that box gets wet?

[@tonykenyon6038]

Hey Brad, I have a 2012 JK wrangler unlimited and for some reason I'm having a hard time finding an spod system that fits my jeep. Any advice?

[@silentseagull20]

does the switch panel affect the way the freedom panel is secured to the loop right above it?

[@jeremy8715]

I wonder how this would work with my Rampage soft top?

[@the.magnus]

Can I confirm the SPOD system eliminates fuses and relays?

[@rxslinger]

While this is a nice looking system I have a question. What do you do if you have a windshield mount for a CB? It appears this setup isn't compatible. I fail to see why this system wasn't designed for the pilar post instead.

[@TrailRecon]

I have been using this system mounted above my mirror for about 2 years and love the location, but I'm got my CB in my center console.

[@deezneezy412]

can we get a walk around vid of Matt's zj

[@TrailRecon]

He and I have talked about it a dozen times... need to lock him into a date and get it done!

[@keithfought8085]

Do they have this type of setup for 98 Tacoma

[@SwAmPDOC73]

Would you get a 6 circuit dual led light setup for 200.00(used) or would you just opt to get the new 8 circuit due to its fuse-less feature now?

[@chrisbee4702]

dji switch box $130 i love mine

[@Ren-ll8tl]

is the sPOD box waterproof that is installed under the hood?

[@felipevalle5389]

Hey do u guys put led lights cuz I got everything but I just been out on for me on my Jeep

[@dinobm13]

omg hit the window same way when i started mine LOL!

[@user-cb7cf6mp4q]

Is the 5% off just for the 8 circuit or on all models

[@TrailRecon]

Discount should be good on all models.

[@TheMrpimp121]

This doesn’t affect taking the hardtop on and off?

[@TrailRecon]

Nope, not at all.

[@gatoloco2022]

Unfortunately in your Radio is mounted via off the screw set, there is ZERO room for the panel. Too bad if you are a Ham operator like me.

[@adrianybarra5994]

can this system work with a dual battery set up from genesis? And if it can, how would you connect it on?

[@RockTrooperJeep]

You should reach out to the folks at sPOD and ask them directly. I am sure they can tell you quickly if it can or what options they have for the dual battery setup.

[@thekeeper5588]

Can i get one of these for my truck?

[@TrailRecon]

They do sell a universals system... I would call, they have pretty solid customer service.

[@thekeeper5588]

TrailRecon thanks,i dont have a jeep but i love watching your videos anyway lol

[@slightlystooopid420]

So what can you switch besides lights?

[@utahboy17]

ARB compressor.

[@raymondj8768]

Yea real cool how much is that sob???????

[@WanderingForMiles]

Would this still work with a dual battery set up?

[@tomknorr9102]

yes of course, wire it to the accessory battery

[@roberthoovan4130]

Do they make one for a yj

[@myytchannel6632]

Universal.

[@TerenceK-yq9iz]

Dose it fit the 3.8 jeeps with right hand drive?

[@myytchannel6632]

Yes.

[@davidparadis490]

Yes, but you have to order the left hand mount option

[@Blueknight1960]

Is this strickly for jeep vehicle's?

[@TrailRecon]

This one is, but they do have other vehicle and universal sPods.

[@Blueknight1960]

TrailRecon Thanks

[@richardroe7102]

Always good content on this channel but that crappy music literally makes me mute the sound and turn on the close captioning.

[@kennywarnow6224]

Ok good info, bad video of what a new Jeep owner needs to do. I would love a more in depth step by step video of each thing please… hell I don’t even know how to re check if anyone responded to this comment.

[@jasonfritsch827]

That is so awesome, too pricey for me though. I had to spend all my cash on a diamond. It's too bad the saying isn't "spods are a girls best friend. "

[@TrailRecon]

Happy wife, happy life! Get use to those 4 words!

[@jasonfritsch827]

TrailRecon brad, is this the only type of spod with this much simplicity. I wouldn't need 8, probably only 4. Do you know of any? thx

[@davidparadis490]

@@TrailRecon stay single and your pockets will jingle

[@thamerendyck1795]

For the love of god dont lose the 10mm

[@shaun8666]

Discount Chris Kyle

[@kevintheomanharris]

#beatLA

[@cadillacvelocity]

Do they make another mount because this is the same location my vacuum pump relocated to?