Cayenne / VW Touareg DIY Drive Shaft Support Bearing Repair original parts

This video is an instruction on how to change the support bearing for the centre driveshaft on a Porche Cayenne or (in this case) a VW Touareg, using original parts. I think this is the best and, for sure, the cheapest way to go. There are other parts on the market where you can change the support in situ, but this means the old bearing needs to be reused. The most important thing here is to make sure the axle is put together aligned with exactly the same splines as it came apart. This job took approx 3,5 hours from lifting to lowering.

[@robertradon2587]

Bardzo dobry film, przydatny dla PORSCHE CAYENE. Sprytnie zrobiony bez zbędnych dłużyzn. Dziękuje za trud i publikacje żeby innym było łatwiej

[@cburkittvw]

Great video. Im most of the way through and this helped a lot. Word of advice - when he says shallow cuts, he means it. Do not try to go all the way through

[@geriatricginger]

I can't seem to find the kit like you used..

[@BoscaMarius]

Thanks a lot for the informative and useful video ! 🙏🙌💯

[@wesleyholte2667]

I forgot to mark spline when taking apart, any way to figure out the right position?

[@hristovrosen7923]

Can you send me a link with the repair kit.I have 2011 Touareg .

[@syedrahatkazmi]

Hi Hans, I just watched your video along with my mechanic, can you please write down the part number which you had to cut out in order to fit the new bearing.

[@spoon761]

If you mean the partnumber for the kit, I think it is readable in the beginning of the video, on the new bearing housing. Meyle something

[@syedrahatkazmi]

@@spoon761 Thanks for replying at your earliest convenience. I am talking about the name and the part number of the part shown on the right hand side with silver colour in the beginning of the video, let's say at 0:02, on eBay some call it DUST Boot or PROPSHAFT Mount, I think. Once again, thank you in advance and this information will be very useful. Regards

[@spoon761]

@@syedrahatkazmi yes, I checked the order from eBay. It was included in the kit. EBay in germany 362442623915. Meyle mittenlager touareg.

[@AzadarieHussainya]

My axel is being off balance what should I do?

[@RusShbreak1]

Where did you get new cover? MEYLE 100 151 0000/S ?? FEBI 100491?

[@luismorales-ey7og]

X2

[@fatmanbhkbjorn]

Hei, Hans. Holder på å bytte begge lager på T5 4Motion. Hvor fikk du tak i cvj cover? Finner ikke noe sted. Hva heter det? Kjempebra video, forresten! :)

[@emadfarid5082]

Thank you !

[@Олег-е4к2к]

what is the article to order a new CV boot?

[@RusShbreak1]

MEYLE 100 151 0000/S ??

[@RusShbreak1]

FEBI 100491 ??

[@UltF1]

Fantastic video thank you for sharing

[@AzadarieHussainya]

It is making weird noises in the car and it’s vibrating

[@72fordmaverick]

How do you know bearing support bracket failure didnt ruin the cage in the joint?

[@omarcontreras8153]

Check the inside grooves for any wear

[@bropro4002]

What year is that Touareg ?

[@MrMustangred]

....or you can buy the entire assembly, drive shafts, carrier, everything in 1 unit and install in 1 hour. $264.00. Total.

[@fabiolamolina5889]

...o también puedes enrollar una cinta de caucho alrededor del rodamiento hasta alcanzar el diameto del anillo exterior original, pegar todo con pegamento de caucho. Total U$5 tiempo 30 min.

[@jamesnorven2568]

May i know where can you order the entire assembly?

[@MrMustangred]

@@jamesnorven2568 Amazon. $240.83 + free shipping. Part number 9100053N. This fit my 2005 Toureg perfect.

[@melinasparks3268]

Yea that’s what I was thinking

[@kaibintech]

great video!

[@Alex-zt9qs]

Геморрой конечно...Спасибо за видео !

[@ZURITROY13]

buy a german they said ill be fun they said... never again...now go change the starter lol i heard you gotta unmount the whole engine just to replace the starter...

[@paulc496]

Yes u do

[@mikasaarela352]

Last vw for me!

[@dbnzt]

Das auto

[@omarcontreras8153]

I build these everyday

[@wesleyholte2667]

I didn't mark spline when taking apart, how do you figure out the right position of spline putting back together?

[@artscienceweekly]

omg, normal garage diyers are not nearly as handy as you are and dont own those tools