How to Grow Mushrooms: Dub Tub Method

This method to grow mushrooms is one of my long time favorites because it was my first bulk method after learning BRF cakes. I used to use a cheese shredder to shred 4 BRF cakes until i learned how to use quart of rye grain spawn and it worked every time.
In this video i could have gotten a bigger harvest if i would have used a sawdust substrate like Agrocybe aegerita prefers but as you can see they still tolerate the coco coir.
Liquid Culture syringes available at sporensprout.etsy.com
Check out all my social links! linktr.ee/sporensprout
Recommended Supplies (Affiliate):
2 pack of 6 quart bins: amzn.to/3EepF1L
Black trash bags: amzn.to/3S80mnL
Coco Coir: amzn.to/3IwCgQy
Vermiculite: amzn.to/3XDKNp5
Spray bottle: amzn.to/3YB6OGh
LED shelf lights: amzn.to/3Ibfn3I
*clicking my affiliate links and making a purchase may result in me earning a small commission, thanks for supporting the channel! 🍄
🍄 Join the new mushroom cultivation Discord community! / discord
Join the new exclusive member channel to get access to perks:
/ @sporensprout
#mushrooms #diy

[@Rootbeeroverseer]

Gotta say, that is HELL of a flush. For each two monotubs I've done lol...I'm stoked to give this a shot.

[@heroiccombatengineer6018]

I wonder how much of the viewers watched this to grow psylocybin perfectly

[@SporeWhore661]

Not hard....

[@Hades-shadow]

@@SporeWhore661if you know how sure. But he never said it was hard did he??

[@bustabusta7676]

Would this be good tutorial to follow?

[@pauque]

@@bustabusta7676 watch multiple lern from there mistakes

[@logansneed2882]

@@SporeWhore661 well the people that know how to do things actually make anything the do look easy, but even though I haven't grown them sure im confident in my abilities to do so, guys video was nice though and knowledgeable

[@meowijuana2322]

Great vid, simple and straight forward. Subscribed. Keep the content comin!

[@SporenSprout]

Thank you for watching! 🙏

[@I_AM_ALL_THAT_WAS]

You simplified the whole process really well. Cheers brother

[@SporenSprout]

Thanks for watching! 🙏 🍄

[@jewelzb1402]

What a great tutorial…thank you!!! 🍄

[@mmpatriot2170]

That was great! I’ve had pretty good success with dub tubs, but nothing like the flush you showed. I learned several things from this video that I will be using going forward. Thanks.

[@mmpatriot2170]

Just subscribed. 👍

[@DankMemer42013]

That alcohol spray technique is flawless

[@cegould191]

Perfect video for us beginners to learn the proper process to make a dub tub short informative and to the point thanks man

[@SporenSprout]

Thanks for watching!

[@cegould191]

@@SporenSprout definitely will be watching more thanks

[@glitterslits6269]

Thank you about that substrate I haven’t been able to find a way of making and pasteurizing my own lol

[@samuelprall8290]

Judging by the tattoo , pioppino arent the only species you grow . 🤣

[@SporenSprout]

😂

[@randallmunoz3605]

What is the temperature for the fructing process?

[@swagpatriot696]

​@@randallmunoz360518-24° Celsius. Somewhere in between is probably best.

[@Tijlcresens]

Hehe

[@smallybiggzzz]

I love how everyone is a youtube grower how to this and that. Watching PGT and the boys old videos and making new videos of the same methodology. Lol Ewww fancy dubtub wow

[@stanrico2991]

Just inoculated my popcorn and grain bags with golden teacher and had enough to expand my culture . Extremely excited to try this dub tub method . Although I now have 900 ml of culture 😂 and not sure what to do with it . I expanded for an experiment beings that I'm a noob I didn't expect it to work 💯 and all three 300 ml Mason jars turn out perfect but unfortunately I don't need that much lol

[@SporenSprout]

Nice job! Just keep the extra LC jars in a cold room and they will be good for future grows. Should be good for 6 months or longer.

[@thomaswilson9254]

Be careful you might end up being the lead character in a mini series on Netflix.

[@fancyincubus]

​@@thomaswilson9254sounds like a wild ride

[@chicofromph33nix64]

Dude that's awesome... I'm expanding by spore prints and doing agar to agar at the moment.. my next goal is to expand my LC.. with that much extra you have,you can do some bada$$ experiments and see what you can do.. if it doesnt work,its all good because you have so much..

[@m3m437]

​@SporenSprout how cold though? Is the fridge too cold?

[@mattemmerson5877]

This is very simple and quite effective. Thanks a bunch!

[@SporenSprout]

Thanks for watching! 🍄

[@maxs_420_grow]

thanks for the the concise video!! mush love

[@abstractbatman]

liking the serotonin structure tattoo

[@Will-Max]

someone knows their organic chemistry!

[@Taboloncawonthemasters]

Dong the same to grow my own oysters and portobellos!!! Can wait to cook them after! I like to put them in almost all my dishes in someway!

[@SporenSprout]

Good luck with the portobello, they are advanced and require specially decomposed straw substrate as well as a peat moss casing layer.

[@Will-Max]

Oysters grow on dead wood, how does that work?

[@tedlofland3446]

I did this 35 years ago but I grew the mycelium in a petri dish with agar agar, then to bird seed sterilized in a pressure cooker and used compost as the growing substrate.

[@nocturnal6311]

Fucking awesome

[@hwells8528]

Clear instructions and well filmed. Simple method. Perfect. Thankyou.

[@leftyB82]

The video is great, I will do everything just like you.last time cvg and this A+ strain is the only strain that turned green . Growing mushrooms Is like therapeutic and the fruits help to Lol

[@hillbillyherb]

Great demo

[@SporenSprout]

Thanks for watching!

[@michaelcribb7205]

Interesting idea i been wanting to try to grow some myself right now just learning tips and different methods

[@SporenSprout]

It’s a lot of fun! Good luck! 🍄

[@michaelcribb7205]

@@SporenSproutthanks I like to grow my own veggies etc I have done a small one once younger using a cow pattie and rain water i collected it made like 7 it will be a new experience

[@UpcycledShrooms-yt8qt]

Didn’t know pioppinos would grow on coir. Good to know. thanks !❤

[@Steveburton1521]

He's on telegrammm as

[@Steveburton1521]

@Cubzritps

[@roberthood9274]

Wonderful video, Thank you my boy 💯🫵

[@SporenSprout]

Thank you 🤝

[@ivanhorvat8964]

Thank you Very Much !!!

[@ryjohns1999]

Love it. Also, I have the same tattoo!

[@brodiethegoaty849]

This is my 30th time watching and have to ask...why is this beat so SICK?! I'm over here freestyling between your voice overs lmao.

[@SporenSprout]

😂Thanks for watching! It’s hard to find the right music sometimes so I’m glad you liked it!

[@gbody_juice4016]

Good info 🙏🏾🍄

[@SporenSprout]

Thanks for watching!

[@Tolbiny]

Great content, subbed.

[@SporenSprout]

Thanks for watching ! 🙏

[@saliue]

Simple but detailed and really well filmed and edited, subbed

[@SporenSprout]

Thank you! 🙏 🍄

[@xjarhead40]

Best video yet! Nice job

[@mattb6646]

Lightly pack down your substrate before adding the top layer, pack a little tighter around the edges to help guard against side pins. Very lightly pack the top layer down after its applied

[@CurrentlyFaded]

thanks for this video. im really trying to get this method down and this is the first video i saw that made it easy to understand,

[@SporenSprout]

I appreciate the feedback, good luck! 🍄

[@kosmika_didjeridoo]

Pioppini passion! ❤

[@Ulocked_Eyes]

Love the chemistry tattoo! I kinda want one now. Not sure what chemical I would choose.

[@williamnewton4759]

Beautiful work

[@ifell3]

Great content, why is it the dub tub method and not a unmodified method, is it because you place another empty one on the top? Must say those pins are the best I've seen!!! 🧡

[@SporenSprout]

Yeah it’s the “double tub” method

[@robb-2202]

Thank you for the great video. How much grain do you use in your spawn? Looks to be about a quart, but wondering if you use a specific amount? I'm considering using a spawn grain bag and thinking that I could divide into two for two bins. Each spawn bag is 2 quarts. Thank you.

[@SporenSprout]

Yeah that sounds good, each quart jar is about 1 LB of spawn.

[@kip1622]

nice video thanks

[@SporenSprout]

Thanks for watching!

[@SagemodeDuey]

So I took the top off my box to check and see how colonized the substrate was. Lots of healthy mycelium growth but the lid is starting to build up condensation. Is that fine or should I not push the lid down all the way??

[@User12565]

Thanks man going to have to give this a shot, easy straight forward video man cheers!!! You can buy already made grain ready to inoculate if I’m right ? Let me know.

[@SporenSprout]

Thanks for watching! Yes, you can buy pre sterilized rye grain online so it’s that much easier, Good luck!

[@User12565]

@@SporenSprout What’s first…. Might run them G Teachers 😁🍄🔥

[@User12565]

@@SporenSprout is 1 10ml syringe of spores enough to do this method twice ? Or full 10ml in the inoculation jar for one ?

[@SporenSprout]

@@User12565 You can use 2 ml per jar

[@fitradical]

bravo!

[@denislavgeorgiev4839]

Can i grow white button mushrooms this way, because they need around 90% humidity of what i heard, and at the fruiting stage the second lit is only resting on the other which results in less humidity if im not wrong. What can i do to keep it more humid, so i can grow them? Also thanks for the great and detailed video 😊

[@SporenSprout]

Yes it would work but white button mushrooms require specialized compost substrate and a casing layer to successfully fruit. As long as you use the correct substrate it would work.

[@ionimusprime5210]

Nice video!!! What's the ratio you are using and do you mist after adding the grains and sub?

[@SporenSprout]

1 quart of spawn to 3 quarts of substrate. No misting until fruiting, and the mist is only applied to the inside of the top tub to keep humidity up.

[@emadhavashem]

At which stage should the exposure be done? Or is there no problem with exposure from the beginning?

[@omartedmori654]

Im curious. If you were to grow in a closed room with an IQ Air system running, it it considered bad even though an iq air gets rid of bacteria. Spores and viruses in the air?

[@chrisclyde4490]

Im on my very first grow snd i kinda went crazy. I bought a pressure cooker, spawn bags, injection ports adhesive and plugs. Also got everything to make agar and liquid cultures. I injected 5 quart jars with brown rice that i made using philly teacher's vid on KZbin. I also had a crap load of bird seed so i prepped and injected 5 jars of that. I also had 2 3lb grain bags that i have going as well. Everything is looking good so far but its only been a week or so. I was wondering how much spawn to substrate ratio I can get away with in a 18 by 14 inch monotub? I also have a bunch of 6 QT shoe boxes did I plan to use and that's what brought me here lol. Looks like I can get away with a 1 to 3 ratio judging by yours. But that may be strain dependent, not sure though. Thanks for all the help

[@nathancks]

hey man this vid was awesome! I'm getting ready to run some pure coir shoeboxes with brf cakes as spawn. Do you think adding a casing layer at 100 percent colonization or at 0 percent would be beneficial at all? I have around 2 quarts of spawn and the bricks i have make about 5 quarts of substrate. could i put the rest i dont mix on top as a casing? thanks!

[@SporenSprout]

Yes I just sprinkle some extra substrate on top before closing the lid to colonize.

[@nathancks]

@@SporenSprout sweet thank you, did just that about a quater inch to 1/8 of substrate on top after I spawned, seing knots and primordia!

[@a-a-ron6822]

Spore to grain is a dice toss.. agar for the win

[@SporenSprout]

Yes I used liquid culture made from agar wedge, I didn’t use spores.

[@zorgath420]

Awesome video! Thanks for the knowledge. When fruiting is light necessary? Like if I left the dub tub in a dark closet in fruiting conditions would they still grow?

[@SporenSprout]

Thanks for watching! They will still grow without light but the mushrooms may be skinny, long and deformed with a smaller yield.

[@zorgath420]

@@SporenSprout aha! Good to know. Thank you Broski! I'm new to mycology so appreciate the info. I'm subscribed 👍🏻

[@lucydog3376]

@@zorgath420 Mushrooms do not need light to grow. They do not use light for photosynthesis like plants do. All the light does is tell the mushroom which way is up and which direction it should grow in. Which is very handy and highly recommended to achieve consistency and easier growing. But yes, they will still grow without it.

[@SagemodeDuey]

So do you think a pound of substrate would be equal to 3 quarts?

[@user-nn4ld6nq2b]

hey man just wondering if this could possibly work with morel mushrooms. idk if you have any experience with them but just thought id ask. i think wood would be needed in the substrate to start anyways

[@SporenSprout]

It would possibly work but you have to have a freshly bred strain of black morel and I believe composted substrate is best. It may be a good idea to add viable rye grass seeds to the final substrate and allow grass to grow in the tub as well.

[@MosesMLam]

I noticed that the substrate was only pasteurized. Will this work with hardwood pellets and bran? Or how would the dubtub method work with a hardwood substrate? (or does it as most hardwood substrates require sterlization?) And btw loved the straight to the chase vids! Subbed!

[@SporenSprout]

Yes it would work but If you use bran it will have to be sterilized in a pressure cooker first and then dumped into the tub and mixed with grain spawn.

[@wilkiedilkie]

Make sure you also take into account how much fresh air exchange the species needs, if it is something with higher fae requirements you might want to add holes to the top container or otherwise think about increasing airflow

[@DasChristoff]

@@wilkiedilkieagree 100%. In fact most tek methods don’t have enough fae which equals subpar results. I always try to replicate Mother Nature conditions for mushrooms as well as cannabis. Think about it: mushrooms grow outdoors, not confined in a box indoors. I create those same conditions regardless of the tek. High humidity, fresh O2 and temps similar to Mother Nature ie: high 70s day low 70s night. Led lighting on timers for day. Room humidity between 65-80%. Not everyone has a dedicated room for this but if you can you are in full control of the ambient environment. Even doing cakes in sgfc have huge yields when done in these rooms. No matter what tek you do, always try to mimic the outdoor environment and maintaining those conditions. 😉

[@Triobrah]

hi do you have a jar of liquid culture tutorial and i subbed

[@SporenSprout]

Thanks! Here’s the tutorial: l kzbin.info/www/bejne/gIrPkIikjrCSobc

[@truthtalker7774]

Nice video. . You said , soake the tub in water for a couple hrs to havest another flush. How do you mean? Thanks! This the second video of yours I've watched. Subbed

[@SporenSprout]

Thanks for watching! After harvesting, just pour some water into the tub and let it sit for a couple hours and then dump out the water and fruit again.

[@Lagger-HD]

Can I mix a pre made bulk sub with a brf sub cake? Thank you for great content.

[@SporenSprout]

Yes I use a cheese shredder to shred the brf cakes and mix with sub.

[@muadddib]

Very approachable and informative. If I can find a place to get spores id love to try lions mane with this method.

[@SporenSprout]

sporensprout.etsy.com/listing/1063761003

[@muadddib]

@@SporenSprout haha id love to get your stuff, but shipping that stuff to germany might be a bit over budget

[@SporenSprout]

@@muadddib Oh yeah I don’t really ship internationally because customs doesn’t like biological products

[@SporenSprout]

@@muadddib I bet you can find some to culture in the wild.

[@muadddib]

@@SporenSprout Yes, also already found a vendor who sells growth kits here, so hopefully getting started soon :D

[@astbrnrd]

🤔 Can you make a sequel to this video, but showing how you meant to get to the second flush? Awesome detail 😊👍

[@SporenSprout]

Just add some water to the bin after harvesting. Dump the excesss water out after 1-2 hours of soakin. Super easy

[@astbrnrd]

@@SporenSprout so "field capacity" is not the same after harvest? That's the part that stumbled me a bit, but i guess it makes sense, it's already fully colonized. But it was worth the ask 😊👍

[@user-yq8he1hu6m]

Lots of good information, thank you!

[@MissBlackMetal]

​@@astbrnrd I'm a beginner too, but thinking about it, I'd presume that field capacity wouldn't be the same after the mycelium has started fruiting, and especially after harvesting. Mushrooms are 90% water, so if you've just harvested a bunch of mushrooms, that means the water that *was* in your substrate is now inside all those mushrooms. So if you want more mushrooms (i.e., another flush/harvest), you'll need to introduce much more water back into the substrate (i.e., rehydrate it by dunking/soaking). I hope this makes sense! 😊

[@erikawilliams2837]

Is this tub more expensive than a regular tote? Also, would it be the same to just use a regular tote? Thank you!

[@jeffsmith8065]

I like how you don't cut the plastic bags,have you notice better results that way?

[@ivanwebster6898]

hi , great video. have a question . Is it works whit PF tek¿ huge from ecuador

[@SporenSprout]

Yes it does. I use a cheese shredder to shred the cakes and I add 4 cakes per 6 quart bin plus like 3-4 quarts of substrate per bin

[@m.i.c.h.o]

OK that tattoo is FUCKING AWESOME. I could recognize psilocin from a mile away hehe

[@JDMgram]

hey great video! what light schedule do you use?

[@SporenSprout]

Thanks for watching! I use 12/12

[@helix-phase]

Holy cow, thank you. How relaxed are you with sterilization conditions? I am trying to find the lower bound for sterilization to maximize laziness

[@SporenSprout]

If you use pop corn as a grain spawn you won’t even need a pressure cooker. Just steam bath the jars of corn for 2 hours. The substrate is just pasteurized in the bucket with hot water and adding the spawn doesn’t need to be in front of a flow hood. So it is a very easy relaxed method!

[@helix-phase]

@@SporenSprout damn! :)

[@Emilianoo8]

Hey man I’m pretty new to this how did you get grain spawn in a jar ? What did you use I’ve only ever seen spawn bags is there a better of the two ?

[@SporenSprout]

Here’s the video of how to make the grain: kzbin.info/www/bejne/q3e0o2WAndagfZY You can put the grain in bags or jars, it’s just preference

[@NaturezaUrbana01]

Yeah, pioppino, of course!

[@Will-Max]

After mixing the substrate and grain spawn together, do you have to add any moisture?

[@SporenSprout]

No

[@BlueOwnzU96]

Hey quick question. How much in weight would that coconut fiber brick be?

[@SporenSprout]

1.4 pounds or 650 grams

[@ThiagoPereira-lu3ht]

It is fabulous how from a spore syringe and using the dubtub method you got a full canopy!! I've been trying all sorts of thing to get a canopy, but my mushrooms always tend to acumulate in one spot or another. I heard recently that clonning a mushroom to agar could help. Could you get me some leads?

[@Strength00155]

In Instagram

[@Strength00155]

Myco_stamets07

[@badgermtn]

No sterilization of the substrate, or are you presuming that the added hot water is enough to possibly pasteurize it, though not completely sterilize?

[@SporenSprout]

Yes, it’s pasteurization with boiling water.

[@Subs1338]

Hmm Ive never used liner and dont really have issues with side pins. I just pat down the sides after spawning to bulk.

[@SporenSprout]

It doesn’t matter if you pat down the sides, the substrate shrinks while growing and the side pins will come after it shrinks and exposes the sides.

[@abeera.a153]

Hi, What u add in the Bucket from beginning and if theres any Alternative fir both items if not avalible?! Can we keep spawn in fridge till arrange to transfer it to plant ?! ( white mashroom)..thx

[@SporenSprout]

In this video I used a brick of compressed coconut fiber. For white button mushroom you will have to use fresh compost substrate instead.

[@EYE69MYSELF]

How long do you leave the fruiting light on for? Do you use 12/12 or 18/6 like growing plants or just 24/7 until harvest?

[@SporenSprout]

It’s not a huge deal but 8/16 or 12/12 is good.

[@EYE69MYSELF]

@Spore n' Sprout Awesome. I usually have plants flowering so I can have them all on the same timer. Thanks for the help!

[@6SidesOfDavid]

What LED light strip do you use?

[@LarsLarsen77]

An hour a day is enough.

[@Colin-gr1hf]

Same as marijuana I think 12 and 12 is the best

[@360_tours]

Hi, During fruiting conditions, what temperature are they kept at? Thanks

[@SporenSprout]

70 F is optimal

[@Arhocks]

I see some people saying you don't need light, and some that has a light on 24/7 straight at the mushrooms, what is correct? I read that a dim lgith for a couple hours is good enough, but what do you do?

[@SporenSprout]

Low strength LED light straight above the mushrooms for 12 hours or more.

[@chefolive6250]

nice vid, how often should the fruit be exposed to light?

[@SporenSprout]

12 hours on and 12 hours off is good

[@onthe_tlctip]

Came here per your suggestion on another video haha. Wondering if there's a reason you don't put holes in the second tub you use as a lid? I see a lot of talk about needing fae and having the air filters in the holes etc etc

[@SporenSprout]

You can definitely put a few holes in the top tub and cover with micropore tape if you want. Iv grown this way so many times and it works great so I never added holes, I just open it 3 times per day to air it out. If you are gone on vacation then the holes would be helpful.

[@onthe_tlctip]

@@SporenSprout Great info, thank you! I like the idea of not having to drill holes or buy more tape so I'm here for that entirely

[@santoshadhikari360]

What are the weights of coco peat and vermiculite?

[@user-fq2ws1nh4u]

Can you upload a video about growing lobster mushroom?

[@DeathbyButterflies1]

so this may seem silly, but are there any containers is could use in place of plastic 6qt tubs that are more “aesthetic?” i get it’s not necessarily, but it would be fun i think

[@SporenSprout]

Definitely! It would be fun to experiment with unique containers 🍄

[@thepropagatinghippie]

what are the measurements of the container you are using

[@nicolecatanzaro4008]

What happens or causes your substrate to not go full white?

[@CannibalOX99]

Hey man. When shrooms start appearing but notnyet ready to pick, do you still fan and mist 3 times a day until its ready for harvest ?

[@SporenSprout]

Yes but just mist the top tub

[@rusty8470]

Could you move your all in one grow bag to the dubtub method?

[@SporenSprout]

Yeah that would work.

[@Fourpey]

Hi I have another question for you! Does this tub method need a specific environment like the greenhouse you built in your other video? Does it need regulated humidity and air exhaust? If I plan to do it in a basement where light is low should I get LED strips? Thank you so much for your response :)

[@SporenSprout]

You don’t need any grow tents or special environment, the tub provides the environment and you provide fresh air by fanning it 3-5 times per day and replenishing moisture on the top of the bin. Yes 1-2 LED strips in the basement is perfect.

[@Fourpey]

@@SporenSprout Thank you so much for your answer

[@patrickhenry7416]

Nice tat 💯🫡

[@kalebfourtner2140]

So when someone says to dunk it in water for 2nd flush, do you take it out of the liner? Or put the whole container in water and sink it?

[@SporenSprout]

Yeah carefully take it out of the liner and submerge it. You have to be very careful not to break the cake. You could even just pour water into the bin and then let it sit for a few hours to absorb and then tilt it to dump out excess

[@davidmarin5669]

Once I have a dubtub, is there any way to make it bigger? I mean, I have a tiny dub tub that I'd like to move to a bigger plastic, could I mix that with more substrate, break the mini dubtub and let it grow again?

[@SporenSprout]

Yeah but it’s better just to do that to the grain spawn and inoculate a bunch of new bins with the new grain spawn.

[@MaximRedin]

Thank you for your video. Where to buy syringe with culture? Btw i am watching you from Russia

[@SporenSprout]

I am not sure where you can get them in Russia. You will have to find them wild.

[@hotpotcoconut6994]

Great video, I have a question. If the tub is completely closed while the mycelium colonises the substrate how does the mycelium breathe if there is no air flowing into the box? And with the other tub on top of the colonised substrate how does it breathe also?

[@SporenSprout]

The lid is not a tight seal even when clicked into place. It is fine how it is for 6-10 days during colonization. You can add a couple holes to the lid and cover with tape and that’s fine too. The top tub is removed 3-5 times daily to fan and mist to replace the air and it works fine. You can add holes to the top bin if you want as well.

[@hotpotcoconut6994]

@@SporenSprout okay I understand now, thank you very much

[@remingtonfrog3170]

U use a LED strip light to keep temperature? Thank you 🌞

[@SporenSprout]

No it is to help the mushrooms grow straight up.

[@YouTubeHandlesAreStupid]

Growing these in my kitchen. If I leave the overhead light on in my kitchen for 12 hours/day, would that be enough light? Basically, I'm asking if a light strip is *really* required.

[@SporenSprout]

That would be fine, it’s not a big deal

[@mrowkay]

do you have a guide on how to make rye?

[@SporenSprout]

How to Make Sterilized Rye Grain Spawn for Growing Mushrooms kzbin.info/www/bejne/q3e0o2WAndagfZY

[@jeffreysousa1104]

instead of using the clear bin and lining it with black garbage bag could we just use a coloured bin but still with the clear lid ?

[@SporenSprout]

That would probably work

[@29ballin]

My question is about septic light from the moon. Sort of a hidden knowledge.

[@badgyalrubyy]

I know the idea is to stay as sterile as possible but do they need to be kept in a sterile environment to grow in the dub tub phase as well? Like by a flow hood or in an SAB? or can it sit on top of my fridge?

[@SporenSprout]

They do not need a sterile environment while fruiting

[@rickheath5507]

Its probably in the comments but there are a lot to go through. How many 6qt tubs can you do with what you mixed up?

[@SporenSprout]

4-5

[@levilinney8364]

Does the jar need light during the inoculation phase???

[@SporenSprout]

No it doesn’t matter

[@chasole4025]

For the second flush, how exactly do you "dunk the substrate in water?"

[@SporenSprout]

Sometimes the substrate will fall apart especially if you soak longer than 4 hours but you would gently place the substrate in a bucket of water with a plate and heavy object keeping it submerged. It’s better if you just pour water right into the bin with the substrate and let it sit for a few hours while it absorbs the water and then dump out all the excess water and continue fruiting.

[@jp99888]

Could you use the dub tub for mushrooms that grow horizontally like reishi?

[@SporenSprout]

Yeah it does work

[@doubledoves1]

hello! i forgot to do a 'casing' of substrate. it has been 8 days. should i add one? or is too late

[@SporenSprout]

It’s fine you don’t have to add it

[@frenchtoasty9506]

Question about shrooms, for a newbie whom hasn’t gotten into growing. Do they just keep growing after you harvest them? And if so how many times? It would be like convenient if you can use the same spawn multiple times, instead of buying a spore syringe after each one harvest. Thanks

[@SporenSprout]

Yes they keep growing after harvest as long as there is enough water, 2-6 harvests. You can clone the fruit on agar plates to keep growing without ever buying another spore syringe. Watch my other videos and you will learn quickly.

[@MrYusha]

Yo fam. How you get such a dense flush?