No video

SPORT QUAD GETS A GSXR 750 MOTOR. 140 HP SUPER ATV BUILD

  Рет қаралды 5,721

SXS FURY

SXS FURY

Күн бұрын

Пікірлер: 11
@mikeeastlawn8665
@mikeeastlawn8665 4 жыл бұрын
It'll be a nice. Bad. Rad. Quad
@canadianboondocker9023
@canadianboondocker9023 4 ай бұрын
😊 I used a 1999 hayabusa external fuel pump on mine. I put a 2007 hayabusa engine in my ds650. This thing will do 100mph in first gear
@avitbig1406
@avitbig1406 3 жыл бұрын
I've put a gsx600f in my ds.. if your gonna put on a chain slipper/slider then purchase a sheet/length of H.D.P.E plastic.. the thickness is up to you.. probably at least 5mm thick. Cut the width you need off then heat it with a heat gun and while hot bend it round the swingarm.. then either hold it till it cools down or get someone else to pour cold water over it while your holding it.. it'll then form the shape and stay there.. then drill and rivet it to the swingarm remembering to countersink the rivets into the plastic so they are not exposed to the chain.
@ericseyler3532
@ericseyler3532 4 жыл бұрын
I built mine about 3 years ago. I used a 2004 predator with a 2007 GSX-R 750. Glad to see someone else doing this. My advice is to take your time, think everything through, and make sure you work out the big obstacles before you start diving in and realize there's no way back. Hope to see a video of it ripping. Check out my video on my channel, might be something there to help you along. Best of luck.
@steelbak-customs
@steelbak-customs 2 жыл бұрын
I have also noticed that there are pretty much no videos detailing engine swaps. I want to do some, but I need a clue, lol. I look forward to seeing your documentations.
@pedrocupey7968
@pedrocupey7968 2 жыл бұрын
What tube to use for the motor mounts? and what chain did you use?
@SXSFURY
@SXSFURY 2 жыл бұрын
It was just half inch i.d. steel tubing I had laying around
@chrismartinez7878
@chrismartinez7878 2 жыл бұрын
Did the motor Fit without cuting the frame.?
@SXSFURY
@SXSFURY 2 жыл бұрын
No it didnt I had to cut and make up a new carrier for the bottom of the frame
@jaymauk4612
@jaymauk4612 3 жыл бұрын
How far have you gotten doing the same thing myself 06 ds650 X with a 08 ZX10 engine
@SXSFURY
@SXSFURY 3 жыл бұрын
actually got it done rode it few times once in the dunes and traded it for a Dirtbike lol quad was sweet just limited places to ride it. check out the video on my channel of when I took it to the dunes
Super Quad Build. Fitting The GSXR 750 Motor in the Frame.
3:27
R6 Swapping Raptor QUAD in 24 hours!
14:27
Vasily Builds
Рет қаралды 839 М.
Jumping off balcony pulls her tooth! 🫣🦷
01:00
Justin Flom
Рет қаралды 34 МЛН
Sunglasses Didn't Cover For Me! 🫢
00:12
Polar Reacts
Рет қаралды 5 МЛН
WORLD'S SHORTEST WOMAN
00:58
Stokes Twins
Рет қаралды 172 МЛН
Smart Sigma Kid #funny #sigma #comedy
00:40
CRAZY GREAPA
Рет қаралды 36 МЛН
10 WORST Motorcycles Ever Made
20:56
BAREBONESMC
Рет қаралды 152 М.
Predator 212 + Polaris Quad Engine Swap
23:26
Brandon's Garage
Рет қаралды 10 М.
I Built A MOTORBIKE With A KTM Engine
26:41
Make it Extreme
Рет қаралды 6 МЛН
Fastest ATV Ever??? YOU DECIDE, 100 PLUS MPH GSX600F KATANA MOTOR
9:47
Stupid Fast John
Рет қаралды 43 М.
I got a Scary GSXR 600 Powered Chinese buggy from a subscriber!
11:39
Vasily Builds
Рет қаралды 1,5 МЛН
Suzuki KingQuad 750 vs 500 Shootout
12:37
ATVonDemand
Рет қаралды 240 М.
Yamaha Raptor     GSX-R 1000 🔥🚀🚀🚀
15:56
ATV Swap Garage
Рет қаралды 529 М.
Jumping off balcony pulls her tooth! 🫣🦷
01:00
Justin Flom
Рет қаралды 34 МЛН