SPRAY PAINTING MY TRUCK WITH TURBO CANS! SHORT BED CONVERSION GETS PAINT! NASCAR FORD F100

[@CaseysCustoms]

PLEASE LIKE THE VIDEO!!!

[@lukevondukemusic1602]

Try Floor Penetrol. I put it on my faded rattle can paint job and it looks like I just sprayed it again.

[@CaseysCustoms]

@@lukevondukemusic1602 I’ll have to take a look I’ve never heard of it!

[@stevogrey3505]

Total Mandela effect, I could swear I watched this around Christmas time.lol I'm going to have to totally try the turbo cans when I start to work on my avenger

[@whitesnake370]

I sliced my hand open with the cutter on a box of foil on Christmas and had to go to the ER. So I'm that asshole aswell

[@gregory.reyes.414]

Damn Casey! Hope you are good bro. I keep that super glue on standby, too! Shit happens. Vitamin E oil keeps the scar tissue down.

[@bazilwreckerloughead]

Most sane people would be like; " I hurt myself, blood everywhere, I gotta go to the E.R.!" Not Casey though, his only thought is; "Gotta finish the truck, my subscribers want to see it finished!" What a trooper, we appreciate it.

[@CaseysCustoms]

First thought was “wheres my first aid kit” second thought was Finishing the video 🤣🤣

[@polygaryd]

​@@CaseysCustoms cut my hand wide open while working, had the same 2 thoughts in the same order. Gotts clean and seal the deep af slice and finish work. Lol

[@bigsexymuthashutyomouth2546]

​@CaseysCustoms Nah dude! Your first thought was....I just cut some sh!t. Where's my turbo can?😂😂😂😂😂

[@mikegranados1902]

Ywah we wanna see the monte carlo finished also but that hasnt happen3d

[@klausreviewscraftrestore3152]

i use super glue on myself and continue working. e.r. cant do anything, just so caled clean it and waste my time. sometimes if the bleeding is alot you have to freeze it with ice and keep reapplying the glue till you finally get it sealed up.

[@tayloralvidrez4342]

3.5 is HUGE! I've been saying that for years Thanks for spreading the word

[@kimberlywilliams9757]

This truck turned out badass! 😁👍

[@pigidly]

I’m calling you Mr Overspray! 🤣 the mustang 4 feet away lol.

[@aslmx1918]

I just used some turbo black on a camper shell. One thing I learned is to shake the crap out of it and when you go to spray, be committed and push the nozzle. I tried to go in lite and it splattered purdy bad but if I just pushed the nozzle all the way it was “ok”.

[@michaelbrinks8089]

Reminds me when I had a thin cutting disc on my grinder & it kicked back & laid the back of my hand open. It had hit bone & cut into it. So after I got stitched up & the numbing shot 💉 wore off. It was sore ÀF.

[@HogoTVOfficial]

When are you getting back on the Impala? Can't wait to see that finished!

[@CaseysCustoms]

Prolly 2 weeks I’ll have a vid on her

[@jasonbose3507]

I LAUGHED SO HARD CASEY WHEN YOUR EDITOR PUT IN THE TRAILER PARK GARAGE DRUNK MANAGER! He's stumbling around with two fingers of Jack on the rocks, splashing 💦 everywhere, so funny 🤣. Your Editor placed you with that funny Trailer Park Manager, absolutely hilarious 😂 😆. Casey, thanks for being the cool 😎 comedian on KZbin! Anyway, thanks for the video 📸.

[@cardestroyeryt2085]

FUCKING SAME😂

[@MarkCarr331]

Dude me too 😂

[@dadedubbledee]

Looks freakin AWESOME

[@Bandit-e3v]

Truck looks badass, keep up the great work. Just don't lose a thumb! Looking forward to more in '24!!!!

[@davidmiller9267]

Muriatic (pool) acid works great to give instant rust, followed up by hydrogen peroxide. The results are nearly instantaneous. Vinegar works but can take several days. Love this truck!

[@simplymusclecars2139]

I hope you are doing better... Nice truck!!!!

[@GiancarloFloyd]

I love how you did this around your finished card without covering them and you did the test spreys in the direction or the monte.

[@XCHANGEDAVE]

I absolutely love the patina on this truck.

[@chanceandashana]

Love this truck. Hope you're ok he'll of a way to start a new year. Your channel is my favorite. Always get exited when I see a new episode.

[@bradleyj.fortner2203]

Yeah, I dig that patina too. Sweet ride.

[@rlp2806]

Becareful, my dude ! Love the truck,and Turbo cans !

[@CaddyJim]

Going from 2.5 to 3.5 intake, then to follow that up with 4 inches in the front & 5 inches in the back. Wasn't sure I was on the right channel but I feel for you every inch counts...LOL

[@DavidsAuto]

Best car content out there! Keep it up!

[@CaseysCustoms]

Thank you very much!

[@CaddyJim]

Sorry but you had me laughing when you recounting your fall. That being said hope you made it to your Christmas party & are healing up well...

[@joemoore4027]

Looks fantastic ! It shows you do not need a fancy showroom finish ! After all it's a truck !

[@rachellsignor6650]

Looking forward to seeing that sweet truck in the sun it’s starting to look really cool

[@Terry-d7f]

Looks great. I'd leave the roof matching.

[@Ian-of9oi]

I sometimes use muffler clamps as gauge mounts.

[@donlandenberg8126]

It socks about your hand. Hope you had a Merry Christmas. Thanks for sharing with us.

[@RockNRod.]

I love it when he says, "I wish there was more rust on it".

[@garyallen5753]

Overspray on the other cars?

[@jmd7244]

casey's channel must be the most underated channel on YT.. love it

[@carsonk3]

Nice rectangle shaped overspray spot on the windshield

[@adamthomas4638]

Good shit Casey that was comedy when you tried to start it with no gas tank. You know craig909 has a truck exactly like your building NASCAR style. Is that bed gonna flex at all cause of that square opening being where you welded anyway love this keep grinding happy new year

[@bigospig]

ADD+paint fumes+looking through camera+forgetting giant hole in the bed= 😂😂😂

[@johnbehneman1546]

Totally Awesome upgrade

[@curtjackson5052]

Casey, the turbo spray U used, can U take a photo of the can so I know what Ur using .. I've got a 03 Chevy suburban hood that the clear is peeling & I figure a good wet sand & That turbo spray clear. Thanks

[@White50.]

Will have the best fume on that black car nice job .

[@MannPropertyServices]

This looks amazing, good stuff

[@eddiegoodwin6611]

Blood sweat and tears. That’s what makes for good content. Looks good!

[@dontblink2782]

Nice video! Thanks! What size are those new tires?

[@NMTrue]

....been there, done that... looking good!

[@Unc_Talks]

Id rock with a black roof.. and black bedliner.. That would be awesome..

[@chrissimes9445]

That would be better than white, given the black wheels. Ordinarily white would be my choice, but I i agree

[@gr33ngobl1n94]

I love this green truck, I would love to respray it the same green and restore it, and lower it, it would look bad ass

[@jfgaxeworks3447]

OUCH dude - glad you're mostly ok! This truck is looking BOSS.

[@Airsofthelpvancouver1963]

Hey did you sort out the rear end I remember it's a one tire fire just wondering what your answer is to this and did you weld the diff and or buy a junkyard 8.8 out of the explorer.

[@goldysgarage189]

Lowering it would make it look amazing

[@johnh4719]

THATS RAT SICK BROTHER! SWEET!

[@coltonwilie2761]

These videos are so great. It feels like we are watching our bro build whatever shitbox they have that week. Keep it up!

[@brucemacy9614]

Looks great. I love the rat rods that you come up with.

[@caseyspeer8179]

Hey you just go and get some vice grip garage wipe on clear or you can spray it on or that sweet patina clear

[@chris01479]

Awesome work... In what room temperature did you use that you spray on that you got good results??

[@ginopumadera4265]

Awesome video!!!! Stay safe get well soon!!!

[@landencox8319]

i love the editing you do, it makes the video more enjoying to watch

[@jesusguzman5435]

Looks great those are good lookin fords

[@doubleduty1703]

Hey Casey crew What are you currently working on? I am working on a 57 gmc 3/4 ton. Got it cheap because someone painted it with purple house paint for a parade.then it was put in the bushes. Down to bare metal now Cab corners and floor is next

[@johnbehneman1546]

Merry Christmas and Happy New Year

[@Realest1979]

Casey is wild asf. That is what makes him unique 😂😂😂

[@nelio77715]

Truck is looking awesome

[@JuanPalos-m8k]

Exellent way to start off the year great project.... truck looks awesome. Keep up the great work buddy shout out to you from Mexico

[@WhiskeyDents]

That chrome needs to me black like the wheels. Leave the roof alone.

[@rodneyf.9595]

Thanks brother great video , I really like the truck great patina 👍✌️

[@johnbehneman1546]

I love the Turbo Can!!!!

[@blakeandrews184]

Love the look . Great job mate

[@ryanknutson1396]

Always look forward to your videos!! Keep up the great work!!

[@latamorewilliams6443]

I like the clear coat you used, but I would have went 2k clear all day❤️❤️❤️🙌 I need that shine💯

[@thercbarn5001]

Glad your ok. Truck looks amazing! Mike c

[@KevinRussell-v6y]

Love the truck Casey.

[@jordanharris6876]

That would look killer wide bodied

[@keithstewart8109]

Love it 😂😂 I'm always looking forward to your videos always cracks me up wish you did uploads daily love all the builds

[@tonyt.9430]

Looks like Texas T and the Shine Runners truck⚡

[@patrickchristie82]

I’m glad you’re ok but I do need to know how to turbo can paint job from a wheelchair. Guess I’ll have to find another test subject. Truck is badass. Holding my breath for the Honda too!

[@dond5103]

4" springs without dropped I-beams? The stock I-beams can't be bent enough to align it you are going to have crazy negative camber.

[@bawintermage8351]

My clear coat is peeling off in large flakes on my bedcover, can I use this to replace it??

[@djmjr77]

Does outro while waiting for the ambulance . Lmao 🤣

[@bawintermage8351]

Are those American Racing Wheels Baja series in Black?

[@wizerd5150]

love it !

[@MarkCarr331]

I love the funny editing clips. Had me dying 😂

[@danlabelle6210]

Looks awesome man

[@JUST_SOLE81]

This is me every weekend.🤪 We are a differnet breed.

[@prat8596]

What wheels are those? I'm trying to track some in 15 inch for my 96. Love you videos BTW!

[@dustinclark9596]

Dude! You gotta go black on the roof! With those wheels, it would be sick!

[@johnbehneman1546]

One of my favorites

[@VintageTinGarage]

Dude, were you wearing sandals while welding?😂 using just springs on a twin I-beam will likely mess up your caster/camber and wear your front tires unevenly.

[@dominiqueeaster9249]

Casey, you got really lucky. You could have easily broken your leg. Glad your ok. You definitely have the best content ever! Happy New Year!!

[@johnbehneman1546]

I m glad you are okay

[@RichardBerry-v5i]

Bad ass man I love it looks good

[@allenrose8302]

I just warped a door with a flap disk after i welded it. Watched it shrink and said well shit.lol.

[@dannyboi2747]

Where did you get those wheels i need to know

[@nativestacker4185]

After watching the last couple of minutes of the video I heard you only put on basically 1 coat , maybe I'll look for some and try a test spray on some panels to see how shiny I can get it .

[@erivon2234]

The injury thing is the direct result of clear coating patina when ya could have sauced it.

[@TheThirdWheel618]

Turbo charged with turbo cans 👍 what was the air intake kit you used ? Thinking of using one with air cleaner for a Cold air intake .

[@Zeroflax]

Casey man your builds are wild man! if I wanted to build this in canada it would be $40,000.... god I wish i lived in the states.

[@ttroy350]

I’d like to see you in the Matt’s off-road recovery off-road games!

[@chanceandashana]

I dont know about about painting top white. Might bd cool.

[@Dogtor.G-The-caveman]

the tool case incident was funny worthy a subscribe like and comment

[@Romas65]

Nice job brother.

[@Salomon-B88]

Love it thank you Casey

[@adammccahill1372]

You where still looking through your eyes looking through your camera 😂😂😂

[@briane4555]

Can you post a link for the wheels/tires

[@colton8269]

could have been a badass army camo truck

[@ishaq6071]

To Allq working in cars or projects. Guys make sure u do your tdap vaccine. It covers tetanus, diptheria and pertisus aka the 100 day barking cough. Its just a small syring. I didnt even feel it. I had med background and i work on cars too for fun. Stay safe broskis. And yes, if you get a cut like that, Go to the ER.

[@johnbehneman1546]

So beautiful and badass