Harder & Steenbeck Infinity airbrush full strip and put together all parts and cleaning recommend

[@Rulomalo]

Excelent, I disassembled my airbrush and then I had parts left over. Thank you so much!!

[@SprayGunner]

Glad it helped!

[@telboy1966manu]

Thank you, this is a great video. I was a bit confused about my new H&S because there were so many more parts than my Iwata Neo, so this video was really useful.

[@SprayGunner]

Glad it was helpful!

[@alvinmarcus5780]

Great video. I love Spraygunner. Excellent place to shop. You get your purchases fast. Thank you Spraygunner. 👍😎

[@SprayGunner]

Thank you!!!

[@chrishowker8431]

clear and concise. As you say in the video.. don't be scared and now I won't be. Thank you

[@SprayGunner]

Exactly!

[@paulhumphriesz4557]

Thanking You! great video really helpful have just bought the H&S CR plus 2in 1#2 my first proper Airbrush very scary but glad I did and found your video and so easy to disassemble and reassemble, glad you mentioned about pulling the needle forward and not back through after painting which makes sense even to a complete beginner like me. 👍😎

[@SprayGunner]

Glad we could help!

[@paulhumphriesz4557]

Hi thanks for the reply when you put the needle back in do you gently push it in all the way till it stops! or just pull it back a little before tightening the securing the nut on the needle. the other question I have is, I took off the end adjusting quick fix learned how to remove the needle etc. but when I put it back on, it now makes no difference to the lever setting what ever you set it at ? am I being stupid . @@SprayGunner

[@SprayGunner]

Yes, gently push it. There should be almost no resistance. Please look inside the quick fix piece with a flashlight. You will see a little cylinder inside, that's where the end of the needle should go in when you put the quick fix back on the airbrush. Also remember, that there are 2 modes for the quick fix - when it pushed in (limited) and pulled out - no limit of the needle action. Feel free to reach out to our customer service via [e-mail] our teammates can help via video, phone call, or even video call

[@musoseven8218]

Really great video - goes above and beyond. Good advice re H&S tools etc too👍✌️💜😊

[@SprayGunner]

Glad it was helpful!

[@TheCombatartist]

Field stripping this is for experts! Good information.

[@SprayGunner]

Good to hear that it helped!

[@hobbydayz9140]

I love my infinity. Looking forward to using my grafo

[@SprayGunner]

Grafo is a different animal, but also super awesome!

[@sprocket5526]

Been interested in a grafo t1 for a long time, but there is literally only 2 decent videos on KZbin made by a guy doing minies. Both good videos, but not enough for me to take the chance on the grafo t1 for my own mini painting

[@bubba6richards729]

Yes. The chameleon is my go to brush. I love it. And spray gunner?….. GREAT COMPANY.!! 😎

[@gazmatraz5248]

Just got myself one, used this to do my first breakdown and change to the 0.4 needle, super nervous and even shaking a little :P. went well I think, I get the correct hose tomorrow so can try it for the first time then. Cheers for the helpful video

[@SprayGunner]

Glad we helped, thank you!

[@MeganPriorPfeifer]

You saved me, thank you!

[@danytalloen]

I just receives mine day before yesterday and thought of testing it on a cockpit... it doesn't release the air :(

[@SprayGunner]

Please reach out to our customer service and they will take care of this for you! [e-mail]

[@francescomuzioein-undaussi2656]

best explaining video!

[@Airbrushkid]

Do you still sell the packing screw driver?

[@SprayGunner]

It is recommended but you could also try using small flat screwdriver, just don’t over tighten it. Very gently

[@tigertanktoo]

Whats the going price for one of those?

[@bubba6richards729]

What is the service kit part #? Can’t find on the website.

[@SprayGunner]

This one? spraygunner.com/airbrush-service-maintenance-kit-by-harder-steenbeck-217500/

[@bubba6richards729]

@@SprayGunner that is the one! Ty. Will be ordering from you 😎

[@blackpyro2006]

Why skip the air value?

[@SprayGunner]

We will make sure to include it for the Infinity 2024 airbrush!