SprintRay OnX Processing and Polishing

[@aaronking2709]

Great video Doc. Thanks for sharing.

[@bgrutterdds]

My pleasure!

[@WillyK51]

How does the stain and liquid glaze compare and lasts? And printing the frame in pink and adding the Crown?

[@bgrutterdds]

Stain wears off in a few months. Definitely not a longterm solution.

[@arbaz102]

So are these better than the regular ceramic dentures?

[@bgrutterdds]

Dentures are not typically ceramic, but rather acrylic. Neither is better nor worse. Just different materials for different applications.

[@jedimario22]

Have used Trusana and is so how does OnX or OnX tough compare?

[@bgrutterdds]

I have not.

[@jedimario22]

DO you have to use the Pro 55 or can you use the Pro 95?

[@bgrutterdds]

Either is fine for a flipper.

[@mattwong2120]

Can I use this to polishing paste and brush for keysplint soft

[@bgrutterdds]

Possibly. But I just use Pumice and a ragwheel and it works marvelously.

[@drdentistdude]

Baron, what's the big white unit next to your sink and the sprintrays?

[@bgrutterdds]

VHF R5 5-axis mill.

[@drdentistdude]

Have you made any videos of how you're using it day to day? I've seen Cory's videos on using milled metal and trilor for bars in hybrids and I was thinking about going thst route for long tetm hybrids.

[@bgrutterdds]

I'm using it for custom titanium abutments, all of my screw retained emax crowns, and the occasional tooth born crown. My goal is to use it for full Arch implant restorations, but don't yet have any of those to restore since adding it to the office. Have a couple coming up soon, though. I can also mail emacs and will do so eventually. But I've only done it for testing so far since I have my MC XL for same day emax.

[@jg-wb3vm]

Which Sprintray would you use for larger applications like a full denture?

[@bgrutterdds]

Either will work for that. 95 shines would volume, such as aligner models. If you're doing dentures, you could probably fit 5-6 on the 55.

[@hillsparkdental5144]

Do have link to polishing pate and brushes, tray? Great video!!! Thanks for all you do to educate us!!

[@bgrutterdds]

Check the video description. I added a link.

[@bgrutterdds]

Just a heads up, I just added a link for the brushes themselves.

[@craighenzel8259]

Do you have software to design and print your own flippers? Surgical guides, bitesplints, etc? I want to do all this myself. Thanks!!!

[@bgrutterdds]

Yep. Just peruse my channel. I show all the different softwares I use for these purposes.

[@bigbadwolves41]

Design 5 mins Printing takes how long? Curing 5 mins Polish 5 mins What printer could turn arround a flipper the fastest? How quickly could one of your DA’s get this completed from scan to delivery?

[@bgrutterdds]

Don't forget the 11min wash. I do the design, myself. Only adds 5-10min to the surgical guide design.