I've lost so much sleep because of your videos!! I'm counting 1LE suspensions in C-10's instead of sheep! Very, very cool build sir!
@bennyohanian30462 жыл бұрын
Man thank you so much, I am putting a ZL1 it's in my 71 Camaro and this helps so much 🙏🙏 thank you
@garylostinspace85003 жыл бұрын
Wish I saw this back when you were taking on a major endeavor, best left for steel fabricators. They sell these on ebay 200.00 on up just look up C notch, because they are extremely difficult to cut just right, as you know better than I or probably 99% of your viewers. Anyways you have a damn nice truck and I'm a new subscriber because I share your passion for street trucks and corny humor!
@ChewyKsGarage3 жыл бұрын
Thanks for the comment! I looked into the formed rails and they didnt fit over the IRS subframe the way I liked. Ive done a lot of fabrication over the years, when I do the next one, Ill build it on a table first, then cut the back off the truck. I did it the hard way for sure!
@extreme-ev47033 жыл бұрын
Nice build, and in a small space. Do you have a follow up with suspension tuning, thoughts, advantages and what you might do differently if you did a new start from scratch build?
@ChewyKsGarage3 жыл бұрын
Thanks! IT is small for sure! Thats a great subject for an update video! I will get to work on that!
@luzsolis30962 жыл бұрын
Nice job 👍 What’s the spring rate you are using?
@ChewyKsGarage2 жыл бұрын
550lb from Aldan American
@benhancock74603 жыл бұрын
Great work man you did a great job! I would have had to have help to get the angels right...
@ChewyKsGarage3 жыл бұрын
Thanks Ben!
@eduranbeast3 жыл бұрын
nice build bro . how did you figure out what angles you needed from the frame and the extension you made
@ChewyKsGarage3 жыл бұрын
Lots of maths lol! Worked it on paper until I had a simple design I liked.
@clist94062 жыл бұрын
Your running IRS rear , you don’t need high frame rails. You just need mounting points
@ChewyKsGarage2 жыл бұрын
Thanks. Sounds like you've built a truck like this with an irs?
@xips4202 жыл бұрын
Where you find the bolt jacks?
@ChewyKsGarage2 жыл бұрын
I know its been awhile. They are allstar brand. I got them at PITSTOPUSA
@JohnSmith-qj4cf3 жыл бұрын
Just tuned in whats the rear suspension from thks
@ChewyKsGarage3 жыл бұрын
Its from a 2017 1LE Camaro
@JohnSmith-qj4cf3 жыл бұрын
@@ChewyKsGarage thks
@mrlt11513 жыл бұрын
@@ChewyKsGarage is it still running the ediff?
@donlivingston24613 жыл бұрын
Corvette rear irs
@regularguyracing3 жыл бұрын
Looks good wish I could be there
@ChewyKsGarage3 жыл бұрын
Wish you were!
@aldencotton1833 жыл бұрын
Did you figure out how to bypass the traction control stuff on the rear end?
@ChewyKsGarage3 жыл бұрын
Better late than never I guess, but yes I did. I have a video out in the next few days to go over what I did.
@nickpfarner52883 жыл бұрын
Love it
@iraqirestoration29913 жыл бұрын
Hey buddy it’s a great job thanks for sharing I have a questions ! Which tire size is these ? What is the height different did you get when not cutting the frame is it that high?
@ChewyKsGarage3 жыл бұрын
Thank you! Tire size is 315/30r18. A mainstay in autocross/track day tire size for big cars. To get the truck as low as I wanted I chose to fabricate new rear rails. Still a lot of fab work to install in the factory frame.
@iraqirestoration29913 жыл бұрын
@@ChewyKsGarage thanks for the information
@ze_german29213 жыл бұрын
How does she rip? Can you tell a big difference?
@ChewyKsGarage3 жыл бұрын
HUGE DIFFERENCE! Sticks like glue in the rear, until I dont want it to.
@ze_german29213 жыл бұрын
@@ChewyKsGarage thanks for the reply man, I always wanted to build my own version of a Road race flavored truck and even looked into buying a chassis but prefer the Homebrew better for many obvious reasons. It is because of great content like yours you might get other people inspired to do the same. Hope you have some more in the pipeline. You should check out the Squarebody Tesla build, it is gonna be sick.
@SemperMortem Жыл бұрын
im thinking of fabricating a infiniti g35 IRS into my 67 C10, they're so damn cheap and I can even get the entire thing from the junkyard.
@jamesaucutt82843 жыл бұрын
I wanna see engines explode along with a lot of carnage