Squarebody Switcharoo, New Trailfinder 2 Chassis for the K10, RC4wd TF2 Tech

Рет қаралды 5,554

RC Everyday

Күн бұрын

Пікірлер: 33

@simon_says_shhh 10 ай бұрын

@rceveryday.... pro tip.....use a lighter to heat the screws before you undo them. Softens the loc tite

@andrewrichey7374 10 ай бұрын

Awesome Josh here watching just home from work 5:13 PM Friday yay it’s Friday

@jesseharriott4253 8 ай бұрын

I bought the cheapest fusion pro almost 2 years ago and slapped it into my k10 high trail with portals. It can do doughnuts on dry pavement (2wd) my wife makes me hike in the Rocky Mountains (Alberta) and with 3 4000 mah batteries I can hike up hill all day. Doesn’t get hot and has no trouble spinning all four up any hill. It Also has great slow crawl capability. Obviously there are going to be way better motors but it’s better then brushed. It’s cheap and efficient. Eliminates the need for a separate esc and less wiring. Definitely my favourite cheap motor/esc combo.

@andrewrichey7374 10 ай бұрын

That’ll be cool Josh I’d watch for it love to see you driving that square body, well I’ll watch for the next one until then peace and chicken grease 😁🤙🤙😎

@ryand4786 10 ай бұрын

Also, shrink RC makes full interior for the little trx4m if you’re interested. Hides the motor and wires , looks great too

@jesseharriott4253 8 ай бұрын

You can build a spacer ring to go between the 12mm hex and the rim

@kingkooper7522 10 ай бұрын

Hey there....think you should go tan....desert earth colour with cream sides on ya new rig.....moderate weathering with couple rust patches...but mainly dirty look. Set of cow horns on bonnet...may be something different to put on? Grabber tyres with rusty cream metal open triangluar spaces wheels too...think like last one you tried on it. As for back bed...inside bit of scale chequor plate and a long tool chest.....old rusty bucket and couple of beer cans to complete look.....but then put on a cheeky bumper sticker slightly wonky with 2a or vote someone type sticker.... Love the uploads and scale garages.keep it up. Peace...

@JusRc 10 ай бұрын

Nice man❤ like playing dress up, keep it scale brother

@kjflyte5088 10 ай бұрын

Program box is so worthwhile on the hobbywing..

@BusyBeesGrading 10 ай бұрын

I'm putting my new body on a vanquish chassis. I love when the body panels are different colors.

@mixermanbear.4002 10 ай бұрын

King Of Scale!😎👍

@brianwood9849 10 ай бұрын

I’m thinking about bolting on the 1.9 Ground Hawgs on mine

@crawlingri 10 ай бұрын

We are now selling hardened steering shafts. Direct replacement. Definately more stout.

@brianargo1659 10 ай бұрын

It might be time to build u a crawler course. But super cool rig and vodeo

@andrewrichey7374 10 ай бұрын

I like the wheel wells are wider on the New body, super cool can’t get much of a tire on my limited edition blazer the wheel wells seem really small

@brianwood9849 10 ай бұрын

I have 4.75 TSL’s on my Limited Blazer, with lift blocks and Teraflex shackles and body lift.

@ClassicSteelRC 10 ай бұрын

Congrats on getting, yet another, squarebody! I think a two tone brown with cream colered sides would be awesome! Either way, I'm sure you'll make it look amazing, as always!

@DonsRCworld 10 ай бұрын

Regarding wheel nuts. Have you ever shaved a thread or two off the steel side? It will allow the nylock to engage the threads.

@craigpimlott204 10 ай бұрын

Dremel and a drill chuck .spin the drill while grinding them with the Dremel .like a lath ..

@KearSki 10 ай бұрын

10:10 Yeah, I've always thought the Yotas and K44s are just too narrow for the usual lifted style squarebodies, they'd look fine under a factory height, low, tiny tire truck but on those big ol mud tires with the lift? nah. And by the time you've put wider wheels and hubs on, the scrub radius can get so out of wack it looks kinda ridiculous not to mention the tire rub on uncut fenders. Although the wagonwheels, both the RC4WD and the Element ones look pretty good. That's why I'm going to use some AR44s from an SCX 10.2 under my Suburban build, as that axial based Longbed you did some videos on has exactly the stance I'm lookin' for, that kinda Axle swapped 2500 look. I'd even managed to get ahold of the RC4WD SCX 10 Leaf Spring Chassis and the leaf mounts for the AR44s. 15:18 The Child. ...RC4WD does sell a double tube roll bar for the K10 so they could match, it's black not chrome though. Part number is Z-S0013 20:00 Huh, I hadn't even realized they'd modified the front end so much from the blazer. I thought they'd only made the wheel cutout bigger but they corrected quite a few of the wonky body lines. Neat! Buuut personally? I'd 100% paint that new one up like Puddin's Short bed Conversion, It's a great color combo and wouldn't need very much weathering to really pop.

@rcsnapon2132 10 ай бұрын

Did tattoo a butterfly on your hand?

@ronitsingh85 10 ай бұрын

ordered my scottsdale body kit 2 days ago, got it today, nice and early in the morning, was surprised to see a big box, its well packaged and a heavy kit! the body is pretty beefy, no corners cut as far as quality goes. I just wish the 2 types of grills offered was included in the kit rather then being sold separate at $30 or so bucks! 😞

@RCeveryday 10 ай бұрын

Dang. I didn’t realize it didn’t have both grill options 🤦‍♂️ I haven’t gotten to start mine yet.

@ronitsingh85 10 ай бұрын

sadly no but glad its available as an upgrade but at $30! I went ahead and spent $91 on CNC machined front and rear bumpers from SSD only to find out it does not fit! 😞 The front one somewhat does but not too great. Since I opened them up, cannot return. Will be listing them on ebay. I will request for RC4WD to start making the machined bumpers they had started in 2016. Now that more will buy the K10, I hope they bring back the aluminum chrome bumpers back! I also hope the grill is made in aluminum as well. With see metal upgrades, it will be one mean looking Chevy. I have some aluminum Ram spot/fog lights, these are vintage and will go very well on the K10, will make a custom bed bar. from aluminum round bar or stainless tube.

@gmummy 10 ай бұрын

Thanks for never selling out. What brand caliper do you use

@RCeveryday 10 ай бұрын

Oh man, I’m pretty sure I got that at harbor freight lol. It’s been cut and broken for years. I bought a new metal digital one a couple years back but still haven’t switched😂 it was harbor freight’s as well lol

@brianwood9849 10 ай бұрын

Why don’t you like 1.9’s? I only like and use 1.9’s with bigger tires. The smaller tires don’t look good to me on 1.9’s. I think the 1.9’s with big tires look better on the square body’s because they are so wide and lots of fender space.