SR5 dash cluster swap (tach & speedo)- 80s pickup/4Runner

[@mrChorbs]

I’ve been wanting to do this for years on my 87 pickup. Just now looking into it…never realized how easy it would be. Thanks for sharing!

[@99FXR]

Fixing an input shaft leak on my trans so it’s out. Speedo has been out too. I needed this quick little video. Nice and to the point. 👍🏼👍🏼

[@ivanjerez2417]

Thanks but!! Been trying figure out for years! I mean years!. In your video just took me 3:42 minutes. Thanks bunch!

[@Raevenswood]

Just so everyone knows you can’t do this swap and just run the truck right after. You have to get the oil pressure sender from the SR5 trim truck 1985-1992, DLX oil pressure sender will fry the oil gauge on the new cluster ... too high of a voltage. It’s about 25$ for an aftermarket one or find one at the yard for cheaper.

[@lordmatthews]

I wish i would of known this.... Fried mine today.

[@Random_Car_Guy]

Where can i buy them. I recently snatched a sr5 instrument cluster for my dlx and I’m planning to do a swap

[@Raevenswood]

@@Random_Car_Guy I bought one from autozone. The duralast branded box was actually the OEM Sankai part inside. It may be a rebuilt part with the original housing but it works fine. You’ll also need the pigtail adapter for the sr5 oil sender wire … might have to track that down on forums or the junkyard if you harness doesn’t already have it. The plastic has a U shaped cutout that allows the connector to slide over the circular brass nub on the end of the sender. The spade connection on the sender is not the correct connection.

[@Random_Car_Guy]

@@Raevenswood Thanks for replying im suprised that a comment from 4 yrs ago replied to me. Thanks for the tips. Do i need more parts or its all the necessary part for the swap.

[@Raevenswood]

@@Random_Car_Guy the cluster, the oil sender unit from the SR5 (22re) and the pig tail for the harness is all you need. The sender is on the passenger side of the block Next to the knock sensor

[@tubejim101]

Thank you for showing how to remove the speedometer cable.

[@ryancason1058]

Hey bud really appreciate it been going crazy trying to figure how to get the rpm to work

[@mighty-lozz573]

Thanks gonna do this to my 1985 pick up!!!

[@vibmx]

Interesting, I did the cluster swap in my 88 4Runner tonight without adding the wire. Tach works but it seems to read low. And the oil pressure gauge reads high key on and drops when running 🤷

[@alfredobrown]

Ok, excuse my ignorance. I have an 88 pickup with the 22re. What year (s) cluster am I supposed to use to do the swap? Thanks for your help.

[@zimarokas]

85-95

[@camposvazquez]

@@zimarokas i have an 86 toyota short bed pick up... Can i swap in this sr5 cluster? Dash .. Engine...cluster look identical.. Thank you in advance...

[@zimarokas]

@@camposvazquez Of course all parts are the same.

[@niveknospmoht8743]

So just plug and play with a sending unit change?? NO wiring changes at the harness with going from a DLX cluster to a full gauge cluster? Is it really that easy

[@queivindeleon8231]

thanks for the vedio man helped me out alot

[@dukeoffroad1566]

glad to hear it!

[@queivindeleon8231]

i just need help on the oil guage i just got mine today n gonna put it on tomoarrow but great vedios man thumps up check out my truck #illestyota

[@dukeoffroad1566]

nice. I like that lowered but not 100% slammed, would not mind DDing that

[@queivindeleon8231]

i like that lowlife style lol. but wen u have time man if u can make a vedio of the oil gauge that would be nice but keep on trucking

[@dukeoffroad1566]

one day, just not on my truck

[@brandonfoster5986]

What about the other gauges

[@bobdudeface570]

Could you do the temp, oil and volt gauges? I want everything to work.

[@dukeoffroad1566]

I'm hoping to do those on someone else's vehicle at some point but not mine. the stock ones are not entirely reliable or accurate all the time so I'm just gunna keep using my aftermarket ones for those purposes. I only wanted the tach.

[@hakosan86]

@@dukeoffroad1566 did you ever end up making that video?

[@Samson-EC]

Your video skipped the hardest part. How did you get your hand behind the cluster to release the speedo? Thanks..JC

[@elirenigar9357]

Is the tachometer accurate when just hot wiring straight to the coil ground?

[@anthonylimongi4394]

Has anyone had issues with the temp gauge not working well after the swap? I have an 89 4runner .

[@agger7336]

Is that a Daihatsu tachometer?

[@ariantzelili2960]

hallo from which the cable for the rotammet was streamed

[@sebastiancampos8847]

What if the two connectors aren’t there for the tach? I have a 86 4Runner.

[@kevincrouch2188]

Connect to the negative side of the coil. I have an 86 truck that had a small studs on the coil +/-.

[@chrisjennings1904]

Still didn't work.

[@charliesybert2683]

You got a 4 speed

[@unidadinformatica6035]

thats work in a diesel hilux ????

[@dukeoffroad1566]

Ui Ui probably not but I'm not sure

[@VictorGomez-vv5hm]

I can do the same swap onnmy 95 tacoma dlx ?? Any 4runner cluster 1994-1996 can do the job ?

[@dukeoffroad1566]

Tacoma, I'm not sure on 3rd gen 4Runner interchangeability with Tacoma but 4Runners went 2nd 90-95.5 then 3rd 96+ so if 3rd gen does swap you will want 96+, not pre 95.

[@dukeoffroad1566]

But, just incase u actually have a pickup, not a Tacoma, 89-95 pickup clusters exchange. Early 3rd gen pickup was cable speedo vs late was electric so sometimes the unit on the other end must be swapped to make em cooperate. 90-95.5 2nd gen 4Runner clusters are the same also.

[@VictorGomez-vv5hm]

Mina its cable speedo. And its a 1995.5 tacoma dlx allready take to scrapyard cluster of 95 4runner. So how i make work battery. And oil gauge.

[@dukeoffroad1566]

battery should work when u plug it in but oil idk, i havent done that. only wanted the tach for mine.

[@dukeoffroad1566]

i'm planning to make those vids later though with other people's rides.