How to make a water level monitoring system with the new Blynk app

[@josedejesusquinonesaguilar389]

Que excelente trabajo y gracias por compartir.

[@ElmerShox]

awsome project this is what i need for my home WATER Tank monitoring and automate the Pump motor!! thanks for this very informative!!

[@fredmunyao787]

How do I set the distance for my tank if it is deeper than the one you used?

[@akshayprabhu8725]

Do I need to use the relay ? Is it necessary?

[@reinhardiven6758]

Can you helpme i cannont turn on or off water pump?

[@user-wg3pq1gx2s]

Add kalman filter, Best read stability.

[@chethanvrchethan633]

Bro can you give all library files in one folder 😃😃

[@bastajm]

hello sir, i use arduino uno r3, gsm sim900a module and ultrasonic. how do i set the code? i use power adapter instead wifi

[@almightypush2251]

Error compiling for board generic ESP8266 module help immediately sir

[@creativeelectronicchannel7647]

Thanks for making water tank level indicator I want use float sensor not use ultrasonic sensor please make with float sensor

[@SC.243k]

Awesome… very beautiful 👌 Fully watched 👍👍👍👍

[@sritu_hobby]

Thank you

[@almightypush2251]

Error compiling for board generic ESP8266 module help immediately sir

[@hafizmustaqim3134]

@@almightypush2251 m too.. can u help??

[@ldrrmoamlan9253]

can be use on river ?

[@klemiraqurino]

Awesome sir can you make tutorial on how did you set up the libraries on your code

[@BhavikBaraskar]

sir I have face the issue at time of uploading the the code.....the error is timeout packet header is missing then what should I do ?

[@alexisgonzalez1288]

muchas gracias me ayudaste a entender una duda que tenia

[@sritu_hobby]

English???

[@almightypush2251]

Error compiling for board generic ESP8266 module help immediately sir

[@bastajm]

how to connect arduino uno r3 on blynk? i use power apadter, because there is no wifi on arduino uno r3

[@RawadYoussef-p2r]

does it make a difference if I used Esp32?

[@sritu_hobby]

Yes

[@NoobWeeb47]

If 5v relay module not being used, is it still running?

[@hussainbasha848]

Bro how you connected the power supply at the end of the experiment...

[@master_jaex1563]

same doubt

[@marotipanchal2880]

Are laptop se

[@almightypush2251]

Error compiling for board generic ESP8266 module help immediately sir

[@Sasanka_Barman_]

Did you make the same project with ESP32??

[@sritu_hobby]

Yes

[@Sasanka_Barman_]

Please share the link

[@killerstain4715]

This project same with flood monitoring system? If same, can i follow this step

[@sritu_hobby]

It's nor possible

[@apongsor5850]

Sir can u make the pcb layout for this project?

[@sritu_hobby]

Yes

[@dianailhan4877]

where is it

[@apongsor5850]

Where can i get sir​@@sritu_hobby

[@mustakimkureshi6791]

Bro where are u shipped from esp8266 CN or HK Please reply

[@sritu_hobby]

China

[@mustakimkureshi6791]

@@sritu_hobby can you please give me this project pdf file

[@factwizard16.08]

Hi can i can control through phone from any part of the world i want to know its urgent please reply🙏❤️

[@eng2321]

Hi can you help me plz , I tried all the steps and they are all correct, but when I try to control the devices via the phone, it appears offline ? what i do 💔

[@Reeze_TV]

Nice! I finally done it!!

[@21_kevinpatel70]

I am getting error of unable to find preferences.txt

[@ghana4925]

Hi does this works for every container?

[@noriakikakyoin3991]

I followed all the steps, starting from start to finish. Blynk app and Node is online but the LCD, Power Relay and sensor is not active, not even lighting up. I followed the wirings and codes. Please help!

[@noriakikakyoin3991]

please respond ASAP I really need this to work please

[@pandey513]

Hua bhai ab​@@noriakikakyoin3991

[@zaccora8831]

How can I make it not dependent to computer, do I have to powered it up with Li-ion battery?

[@sritu_hobby]

Its ok

[@dolafoundation]

this is a big problem (Now, select the board and port. After, upload this program to the Nodemcu board) please help me

[@Arnay111]

Awesome project

[@asriarifin5492]

I try, but the breadboard no much space for node mcu esp8266, how i can connect the esp8266

[@sritu_hobby]

Please use two breadboard together

[@asriarifin5492]

@@sritu_hobby sir i was try, but why lcd didn't on?

[@sritu_hobby]

check the jumper wires

[@asriarifin5492]

@@sritu_hobby what the input of esp8266?

[@asriarifin5492]

sir what you use the power? i was try, but relay, lcd and sensor not active if i only use usb from my pc

[@sritu_hobby]

Check your jumper wires

[@yogaparipurna8121]

I have a problem with the led light, the green light until the red light doesn't want to light up?

[@aanaldd6091]

hi sir if i using esp32, need to change code or using the same as your?

[@sritu_hobby]

Yah of course

[@ksgame123]

Is necessary to connect relay into battery

[@m-hamzamalik]

Hi, Thanks for the vid! Please can u clear that will this command will automatically turn on/off the relay and can we generate a graph of water level w.r.t time in Blynk app?

[@oda4508]

What is the power source used?

[@sritu_hobby]

USB power

[@tuankietjoey1578]

HC-SR04 can't detect water . How do you do that success ?

[@apongsor5850]

The liquidcrystal library you've given is not applicable for esp8266

[@yenhingleow8558]

do u solve this problem?

[@apongsor5850]

No

[@yenhingleow8558]

@@apongsor5850 do u connect to hardware? I ask discord in the morning, they said it just a warning, if not mistaken , it can work.. I didnt try yet.

[@mr.techhelper2921]

Sir Compilation error: LiquidCrystal_I2C.h: No such file or directory is the error coming

[@charishma1222]

Me too same can u tell me how to correct it

[@onlyfacts......5458]

sir can we use the same architecture with esp32??

[@nurnajwaasyilahhelmi4952]

Hi..have you done this project with esp32? Because i also only have esp32...is it still working with esp32?

[@dinithdamsara7146]

how to on & off the water stream???

[@ahmadzaidi8494]

can u share the full code, i get error for uploading it

[@onlyfacts......5458]

sir what to do if i want to add buzzer

[@Us07vlog]

We need help in this

[@Reeze_TV]

What if my water tank is bigger than the video? How can I edit the depth that the sensor can read??

[@Reeze_TV]

Please reply sir

[@almightypush2251]

Error compiling for board generic ESP8266 module help immediately sir

[@Hollymarcus-x3b]

How can i insert the water pump?

[@sritu_hobby]

Visit our website

[@fadiyaansari1223]

Compiling error need source name n code Plzz help what should I do

[@AsifShaikh-uc4ko]

i have an issue . while uploading the code it gives me template id and temlpate name error plz help me to resolve it i have a project on it and has to present it on next 3 days . thank u.

[@ahmadzaidi8494]

same goes to mine error, how u solve it

[@vijiljoy5125]

How we want to connect the mobile with the board we have to turn on wifi or Hotspot in mobil Pls reply

[@marotipanchal2880]

Hotspot

[@sritu_hobby]

WIFI

[@t.shravyasree-ie-2435]

How much is the total components cost...i mean it took..total cost todo this project

[@sritu_hobby]

It depends on your location

[@t.shravyasree-ie-2435]

@@sritu_hobby r u not from hyd...

[@t.shravyasree-ie-2435]

@@sritu_hobby by the way how much it took for u bro!

[@vedant9011]

where upload the program

[@queenelsa8272]

sir why my lcd display, he din't show the text? how can i fix this sir?

[@sritu_hobby]

Check the jumper wires

[@queenelsa8272]

@@sritu_hobby my jumper wires are plugged in correctly sir, and I've disassemble and then assemble the project in 5 times, but still won't show the text on the lcd display

[@muhamadbarronmaksalmina2493]

Excuse me sir, my relay doesn't want to On/Off while i clicked on blynk app mobile. Do you know why it happen? Thanks

[@sritu_hobby]

Check the jumper wires

[@seanbenkadusale5680]

i need help guys, what to do if im using esp32?

[@halleyhart7161]

How can we control the water pump from the tank. I can see the on and off button on the smart phone is not working

[@shineetejol]

Where is motor😂

[@ALLINONE-ec9jq]

good but i want on off switch in this project

[@sritu_hobby]

You can use a push button

[@t.shravyasree-ie-2435]

Wt is th total cost took to complete this project

[@Hollymarcus-x3b]

How to connect the water pump

[@sritu_hobby]

Visit our website projects

[@sujaikumar6124]

relay is on without giving on in blynk dashboard what should i do

[@sritu_hobby]

Follow our steps

[@anirbandutta5436]

Can any one tell me how to add a buzzer

[@shandradm911]

good work thank you

[@sritu_hobby]

Your welcome

[@shandradm911]

there's only a little thing that is not the Notifyline

[@almightypush2251]

Error compiling for board generic ESP8266 module help immediately sir

[@neko_gaming8575]

What kind of water pump that good to use in the project?

[@sritu_hobby]

It depends on your requirment

[@almightypush2251]

Error compiling for board generic ESP8266 module help immediately sir

[@charishma1222]

Same error sir plzzz help me immediately sir plzzz

[@sarathsurya8209]

Bro how do you connected the power supply

[@sritu_hobby]

Please check the circuit diagram

[@sarathsurya8209]

We should connect the 230 v AC motor

[@sritu_hobby]

Connect it to the relay module

[@sarathsurya8209]

@@sritu_hobby bro can we connect the 9v dc battery , for demo is it works

[@sritu_hobby]

Yah

[@muhamadridzuansyahbinahmad8733]

i follow all step but doesnt work ....why???

[@AmulyadineshChiniammu-bo1ns]

We are getting error while uploding the code...!!! *Error compling for board NodeMCU 1.0(ESP -12E module)

[@sritu_hobby]

Please select the correct board

[@shrawanihipparkar5224]

Program upload plz

[@muhammadsyafiuddin9683]

why serial monitor at arduino don't show word and also output?

[@sritu_hobby]

Change the buderate 9600

[@selpira7314]

Why happened WARNING: library LiquidCrystal_I2C claims to run on avr architecture(s) and may be incompatible with your current board which runs on esp8266 architecture(s). Help me!

[@msivakumarmcor823]

Same problem bro

[@msivakumarmcor823]

If you have solution plz tell me bro

[@selpira7314]

why the lcd error only appears

[@marotipanchal2880]

Bros......i think your lcd......screen is green.....plz take the.....blue display

[@marotipanchal2880]

@@msivakumarmcor823 Bros......i think your lcd......screen is green.....plz take the.....blue display

[@dikkinomiarki5753]

Relay not working

[@yoyooookim3]

Hello how to upload that file?

[@sritu_hobby]

Watch the video

[@eimbh]

Don't try this as sensor doesn't work properly.only sensor is it's drawback

[@SayanSaha-nc6mv]

It works nigga.i tested it mahself

[@95Dap8]

Why it's called VCC?

[@swedhaprabakaran1610]

Thankss a lot sir this is very useful ✨

[@sritu_hobby]

your welcome

[@almightypush2251]

Error compiling for board generic ESP8266 module help immediately sir

[@NoobWeeb47]

Mine shows liquidcrystal_I2C.h: no such file or directory

[@sritu_hobby]

Include the library file

[@palanismay8131]

I have a doubt ....How to contact you bro ?

[@sritu_hobby]

Please send your issue using contact us page. It's in the website.

[@supriya.p9384]

@@sritu_hobby Thanks bro

[@widiaafiati8488]

Bg ada program dasarnya? Saya boleh minta 🥺 pengen buat gitu juga nih bg

[@sritu_hobby]

English??

[@muhamadbarronmaksalmina2493]

She asking for coding program that you use on this project sir

[@zakiralkohly3719]

nice job

[@sritu_hobby]

Thank you

[@zakiralkohly3719]

@@sritu_hobby you are welcome

[@almightypush2251]

Error compiling for board generic ESP8266 module help immediately sir

[@Us07vlog]

Hi i need proper code

[@mustakimkureshi6791]

Bro can you provide codes for motor or pump auto on/off when level very low or High (Full)

[@22.mauryarohanramji51]

which board to choose?? in boards section

[@sritu_hobby]

Esp8266

[@digitalnexte3397]

good

[@sritu_hobby]

Thank you

[@amirhazim175]

hi sir, can you tell me what kind of power supply can be use on that relay module?

[@ALLINONE-ec9jq]

i make but show blank lcd

[@sritu_hobby]

Check the jumper wires

[@shreyas8314]

Where is the code link send me

[@shreyas8314]

because i was also doing this project to college

[@sritu_hobby]

srituhobby.com

[@status-pe4sd]

Code is not working

[@fadiyaansari1223]

Plz Plz help this is my project

[@CherieTiongson]

It didn't work when I tried this

[@hithushmohanaraja1133]

Bro what went wrong?

[@blackpanther801]

code sir ?

[@sritu_hobby]

In the description

[@TECHAB254]

How to connect to wifi

[@sritu_hobby]

please read my tutorial in website

[@sandipmondal6221]

Hi sirr

[@jasaskripsielektro]

After upload program succes, there is no view anything in serial monitor, and status on blynk is offline. What must i do?

[@jasaskripsielektro]

I am follow step by step, but i am using wemos d1 board.

[@sritu_hobby]

Enter your blynk auth token

[@jasaskripsielektro]

@@sritu_hobby done, after upload nothing happen, and status still offline

[@alkenetade]

Where do we find the source code?

[@sritu_hobby]

Link in the description

[@digitalnexte3397]

music galat ha

[@stechbds]

ALL OK BUT LCD NO SHOW

[@sritu_hobby]

Check your wires or contrast of the LCD

[@FrjejjrhsHshah]

How I can contact you on whatsapp

[@grmcentralkenyatv3409]

Where is the code

[@sritu_hobby]

srituhobby.com

[@saileshnaidu9427]

Error compiling for board generic ESP8266 module help immediately sir plzzz

[@DilnozaNajmiddinova-rj2fv]

????

[@aadvik.4218]

Where is the code?

[@sritu_hobby]

Description