Finally, a simple, clean and to the point video. I appreciate you doing this. People have made this swap out to be like you need to collect all 7 Dragon Balls. You got a new sub… Damn, I just realized this is 3yrs old. I wonder how come I never found this before??? Better late then never…
@marcoyecguanchuy59175 жыл бұрын
If you wanted to go wit the 6 piston brembo those spindles are compatible. Rears stay the same.
@DropTopPerformance5 жыл бұрын
Unfortunately the 6 pistons were out of my price range at the time. However I will be upgrading to them in the next year or so.
@R3llim874 жыл бұрын
thanks for the walkthrough, have a like. Also, single best thing to do on your new srt brakes, good set of pads. Try carbotechs, etc.
@chriscruz15264 жыл бұрын
i have question i have charger rt 2019 i whanna install brembo 6 piston & i whanna know if i can used the same brake line of rt to brembo calipers & the bolt
@DropTopPerformance4 жыл бұрын
Yes you can
@elias65644 жыл бұрын
I just finished doing that swap. Make sure the brake line is attached to the caliper when you buy it. The stock rt caliper brake line will not transfer over. but the mounting point on the wheel well is a direct fit.
@b5beast6116 жыл бұрын
Looks well worth the time and effort. Nice job. Looks great!!!
@DropTopPerformance6 жыл бұрын
It stops on a dime now!!!
@b5beast6116 жыл бұрын
DropTopProductions Awesome 👍👍
@drewhite52303 жыл бұрын
I've been looking for a video like this for awhile. I always wondered if it was possible. Thanks bro good detail video! Mopar👊🏿 you definitely just gained a new follower.. @Drethehardway
@chicostick20084 жыл бұрын
Got a 2019 Challenger RT. So if I get all the parts off a 07 and up SRT Charger/Challenger will it fit?
@chicostick20084 жыл бұрын
Will I need to change my stock wheels which are 20x8?
@DropTopPerformance4 жыл бұрын
Yes it will work, the wheels need to be 20" to clear the Brembos so you'll be fine!
@isaacbyrd85044 жыл бұрын
Drop Top Performance could I use stock spindles ? I have 2019 challenger sxt 20” wheels
@DropTopPerformance4 жыл бұрын
@@isaacbyrd8504 you need SRT spindles
@rafarafita30054 жыл бұрын
Drop Top Performance why do we need srt spindles
@Mostvile2 жыл бұрын
Will the 2006 srt spindles work? I’m hearing some conflicting answers saying the 2006 were different than the 2008+
@easyfame3 Жыл бұрын
Can’t you buy an adapter instead of replacing the whole steering knuckle ?
@kniteryder20793 жыл бұрын
Can the SRT Brembo clear police rims
@DropTopPerformance3 жыл бұрын
I am not sure, I have 20" hellcat reps
@Rois3003 жыл бұрын
What idk about is how come it couldn't be done on the original knuckle..can anybody explain this to me pls?
@DropTopPerformance3 жыл бұрын
Because of the location of the mounting points are different.
@frankejr744 жыл бұрын
Why is changing the spindles necessary ?
@DropTopPerformance4 жыл бұрын
The mounting points are different with the Brembos
@TeW33zy5 жыл бұрын
Dude your musiq is way to loud coming in and out, lower your damn volumn it doesnt need to be that damn loud when coming in. I had to turn it down then up once u talked, balance it out by reducing musiq from 100% to 60%
@DropTopPerformance5 жыл бұрын
Sorry that is was to loud for you
@CoffeeVSInvesting4 жыл бұрын
My Charger needs this mod pretty badly. Also seems like a good time to do suspension.
@DropTopPerformance4 жыл бұрын
One of the best upgrades I've done!
@lorenzomartinez19124 жыл бұрын
I did the same thing you did in the video but it didnt work on my car because the tire ring rubs on the caliper, i bought the spindle and everything. I really need your help.
@DropTopPerformance4 жыл бұрын
What size wheels do you have, you should have 20s to fit the bigger brakes.
@johnlewis97154 жыл бұрын
Quick question will 2007 charger SRT Brembos bolt directly on my 2015 charger RT Road and Track? I'm getting everything from SRT spindles front and rear disks, pads, brake line and 4 brembo calipers etc.
@DropTopPerformance4 жыл бұрын
Yes, mine came off a 2010 srt8
@spacebigfeet Жыл бұрын
enjoying the choice of songs !
@shelovessavieent7 ай бұрын
when i here any song like these i get flashbacks from when i use to trickshot on bo2 and watch dubstepzzz
@Petethebuilder4 жыл бұрын
People when he said he had to gt it pressed out well all he had to do was put the nut back on till its level with the bolt then hit the nut with your hammer till it pops off then remove the nut and wala.😎
@gianobello6294 жыл бұрын
I have 2016 Challenger Shaker. Just got srt8 brembo caliper set front and rear. Sandblasted and ready to be powder coated. The question is, Do I need to get srt8 spindles to fit the caliper i have? My wheels are 20"
@johnsmith-qz4bv3 жыл бұрын
what size rim are you using..?..i have 17 inch rims will these work..?.
@DropTopPerformance3 жыл бұрын
I run a 20" i honestly don't think a 17" would clear the Brembos
@johnsmith-qz4bv3 жыл бұрын
@@DropTopPerformance ok thank you
@kevinmorris74315 жыл бұрын
I just got my front spindles put on. Did you use the same bolts that mount the old calipers to mount the brembos, they seem to be the same. Also, there are no axle nuts up front right?
@DropTopPerformance5 жыл бұрын
Yup I just used the same 2 bolts and she was good to go!😁
@josephcruz47182 жыл бұрын
Will this work for charger pursuit
@dramirez15972 жыл бұрын
Will I need to change brake lines ans sensors on the rear? Or the front?
@SrtCuervo8452 жыл бұрын
you ever found that answer?
@greystonerider4 жыл бұрын
can you list the spindles and parts you bought? I want to upgrade my v6 2018charger without buying spacers etc.
@Shatter3d_ranger4 жыл бұрын
Kevin Kherkher I got an app called carparts.com that’s basically all the junkyards in the US. That’s how I found my spindles and knuckles
@rogeliocervantes66794 жыл бұрын
Why was the brake line a pain what should I look out for
@marcoyecguanchuy59175 жыл бұрын
What year spindles wouldn't be compatible for those brembos. Cause I have 16 scat pack brembos
@DropTopPerformance5 жыл бұрын
As long as you have spindles from an SRT car you will be good to go
@TeW33zy5 жыл бұрын
So u put a weaker spindle on
@DropTopPerformance5 жыл бұрын
Dont really see how its weaker, maybe you know something I dont 🤷♂️
@CEze874 жыл бұрын
Does this apply to the Durango as well?
@GAPOWERade6 ай бұрын
It looks like you installed an entirely new brake line or did you just clean up the old one?
@srt8_mango5673 жыл бұрын
I noticed you took off the dust shield and didnt put it back on ? do you not need them ?
@DropTopPerformance3 жыл бұрын
I haven't had any issues since i have done the swap
@srt8_mango5673 жыл бұрын
@@DropTopPerformance What about the brake lines? I thought out R/Ts wouldnt work with the SRTs?
@angelreyes6295 жыл бұрын
Cool, what size rims? Looks perfect bro
@DropTopPerformance5 жыл бұрын
20" hellcat reps, no issues with clearance
@johnsmith-qz4bv2 жыл бұрын
was it hard to bleed the brakes after ..?
@aaronferguson475 жыл бұрын
Do you have the hellcat hood on your car
@DropTopPerformance5 жыл бұрын
Unfortunately not, I have modified my original hood Using hellcat vents tho. I have a video about it
@zeush5.7833 жыл бұрын
You should put the prices
@KC-ug3oe3 жыл бұрын
So is it even possible To but 08 brembos and spindles on a 2013 sxt challenger
@DropTopPerformance3 жыл бұрын
Yes, mine are off a 2010
@G3BEWD Жыл бұрын
I have a question, do I have to replace the spindels in the 2011+ Durango?
@wilmertorres33592 жыл бұрын
Did you use same bolts to hold the caliper with spindle??
@andrewmoroney13174 жыл бұрын
Not that this isn't a cool mod to do, I do have one alternative if you guys are looking to make your car stop better. Look into the BR9 brake package. There is even a forum thread on the BR9 swap with part numbers and everything. I mention this because this particular mod is going to set you back quite a few bucks and the alternative is significantly cheaper. Don't have to change spindles, you get 14.5" fronts where brembos can be either 14.2" to 15" depending on what model it come off of. The trade off is this, you get 2 piston cast iron calipers. These are the same brakes that come on all 2014.5 and up Charger Pursuit cars so parts are dirt cheap all things considered. Good vid though man. You didn't overcomplicate it. Just down and dirty. Liked your vid on the exhaust overrun too.
@DropTopPerformance4 жыл бұрын
Thanks man, and there are definitely different ways to improve braking. But for $800 I couldn't pass it up! Still looking for rear spindles though 🙃
@andrewmoroney13174 жыл бұрын
In Canada our bone yards have decent deals on different brembos but cost wise the br9 is the best bang for buck. You just don't get the red block calipers.
@Cutt42103 жыл бұрын
Thanks for this video and very informative. But I am wondering what is the reason for replacing the spindles.
@DropTopPerformance3 жыл бұрын
Thanks! You have to change spindles because of the mounting location of the brembos
@TeW33zy5 жыл бұрын
That new spindle looks extremely thin and weak
@FreeMcWilly3 жыл бұрын
Sorry to ask but the only video I see people still asking, I was told for better rim clearance in the front to replace my front spindles on my RT 2017 for srt as they " have more clearance " but I'm wondering if I don't want to do the Brembo upgrade just yet can I use the regular brakes on the srt spindle.
@DropTopPerformance3 жыл бұрын
I honestly don't know, I would think no because the SRT mounting points are set up to run a larger rotor so I would assume there would be an issue. I say just wait until you have the brembos and everything you need for the front
@Pizzaboy1452083 жыл бұрын
Can the spindles be from a 2013 srt ?
@DropTopPerformance3 жыл бұрын
Yes sir
@pfcpfc51443 жыл бұрын
hello love the vid need to know on the rear spindles in stalled do u need to shange them for brembo calipers or can the go on the r/t spindles has any made a vid on that install please
@enriqueramirez4393 Жыл бұрын
still don't get that answer?
@braymay696121 күн бұрын
Do you not have to bleed the new break lines ?
@Enju232 жыл бұрын
I haven't turbocharged my SXT yet, but damn, for flare I think I'd definitely want to upgrade to this, I've noticed how meh the stock brake rotors have looked
@khadijahakim51943 жыл бұрын
What year could I use on my 14????
@DropTopPerformance3 жыл бұрын
My car is a 2012 and I used parts off a 2010 300 srt 8
@sherweezy24082 жыл бұрын
Does an srt spindle work or does it have to be a specific srt serial number on it?
@reese2127 Жыл бұрын
same part fits chrysler 300 5.7 right?
@davidgandara3544 жыл бұрын
How come you have to get new spindles ?
@DropTopPerformance4 жыл бұрын
Because of the mounting point of the Brembos are different than the non Brembo spindles
@ScoutPL4 жыл бұрын
Does it matter what year of spindles/Brembo brakes you buy? For instance, I have a Challenger R/T Plus. I found a take off from a 2006 Chrysler 300 SRT. Any difference in years. Any difference in Chassis as for as Challenger vs Charger vs 300?
@DropTopPerformance4 жыл бұрын
So I dont think so, then ones on my car are from a 2009 challenger SRT8 and I had no issues.
@luisortega1768 Жыл бұрын
Would the brembos off a 09 srt8 work on my 2017 charger rt?
@benbioux15 жыл бұрын
Needed to bleed brakes, no?
@DropTopPerformance5 жыл бұрын
Yes you do.
@RazereDgeX4 жыл бұрын
Hey I have 2011 RT charger and picked up a 2015 scat pack 6 piston front and 4 piston rear, looking to add the kit to the car since we’re running 470 to the rear wheel and got the kit for a stupid deal. What spindles would I need to make this work, front and rear? Thank you in advance
@DropTopPerformance4 жыл бұрын
Thats awesome man! But any SRT spindle will work
@RazereDgeX4 жыл бұрын
So even a 2015 hellcat spindle? And I also have a pick on a 2008 spindle would either one work. Sorry and thank you again for your input
@DropTopPerformance4 жыл бұрын
@@RazereDgeX yup as long as its a spindle that has the correct mounting point for the Brembos
@ryanreddix24603 жыл бұрын
Quick question I just bought some 22in hellcat replicas they came off a 2019 charger but my charger is a 2012 sxt do I need to do the swap so the rim's can fit
@DropTopPerformance3 жыл бұрын
No sir, your new wheels should fit just fine, same bolt pattern
@ryanreddix24603 жыл бұрын
They rubbing up against the knuckles
@DropTopPerformance3 жыл бұрын
@@ryanreddix2460 what part of the knuckle?
@ryanreddix24603 жыл бұрын
The top edge of the rim it self
@MrJaG12804 жыл бұрын
Did you do the rears?
@DropTopPerformance4 жыл бұрын
Not yet still settling into the new house and work/the newborn. But once I get back into a routine I'll be on the hunt for the rear spindles and ill make a video
@MrJaG12803 жыл бұрын
Any updates on the rear?
@richstar925 жыл бұрын
Why would you change the spindles LoL ?
@DropTopPerformance5 жыл бұрын
I'm pretty sure you have to change spindles in order for the brembos to fit
@josesalas60154 жыл бұрын
What kind pf calipers are those, are they brembos? If so where did you get them?
@DropTopPerformance4 жыл бұрын
Yes they are brembos off of a 2010 300 SRT
@josesalas60154 жыл бұрын
Does it matter from what Srt its from, for example would a jeep cherokee srt8 spindle work?
@DropTopPerformance4 жыл бұрын
@@josesalas6015 I honestly don't know about jeeps
@TeW33zy5 жыл бұрын
Plus that is a little thin spindle and will snap watch
@DropTopPerformance5 жыл бұрын
Been on there for over a year and have had multiple track days not to mention the thousands of mile on the Autobahn seems to be just fine🤷♂️
@willsr23833 жыл бұрын
Someone sounds like a hater. If it came off a srt then it's designed to handle the power. Probably thinner to help cut down on weight 🙄
@mexass12 жыл бұрын
What if I just want to v8 breaks non BB
@DarthRaider2 жыл бұрын
Where can I buy brembo calipers?
@OfficialCorwinTuggles4 жыл бұрын
Im late to the Party but Question? I have a 2015 Dodge Challenger Rt looking to upgrade my brakes, do i have to switch out my brake line in order to install the Brembos.
@Rjelectricfingers2 жыл бұрын
What year spindle can i use on a 14 srt8 charger as i bent my oem spindle nd need to replace it !! I hurd all 2006-2014 will fit? Let me jnw what u think
@tjsocool43808 ай бұрын
Where can I find this kit
@edveneziale12935 жыл бұрын
Link to purchase the kit please?
@DropTopPerformance5 жыл бұрын
This is a mix of parts that i bought, there really is no kit
@Kakaroth_34 жыл бұрын
If u wanna upgrade the brake sistem from diferent car is it possible let’s say can u go from hellcat brake and rotors and put them on a mustang or camaro ? Is that will be a problem or it won’t fit or any other issues?
@DropTopPerformance4 жыл бұрын
Firstly thats a sicks profile picture you have. But thats a really good question, im not sure honestly. So are you trying to swap dodge specific brakes on a mustang?
@Kakaroth_34 жыл бұрын
Drop Top Performance nor really im just putting the example if it will be a problem to have brakes that came of from hole different car and put them on a different car changing brakes and rotors
@Kakaroth_34 жыл бұрын
Drop Top Performance let say i found out a set up of brakes and rotors that came off of a hellcat challenger and i wanna put them on a camaro 3.6L or 2.0 can i do that ir i can only do upgrades on brake sistem from the same type of cars so if i wanna do upgrade a camaro set up it has to be from a camaro set up or if is a mustang it has to be from mustang etc.
@DropTopPerformance4 жыл бұрын
So I would believe that the mounting tabs would be in a different location and also the rotor size might be different. But im really not sure to be honest.
@ricky58075 жыл бұрын
did you have to change out brake lines?
@DropTopPerformance5 жыл бұрын
I did not, but I'll probably upgrade to braided lines soon
@pacmann21065 жыл бұрын
Do you have to change the spindle
@DropTopPerformance5 жыл бұрын
You sure do
@brandonrobertson55526 жыл бұрын
Love it!
@DropTopPerformance6 жыл бұрын
Thanks man!!
@bkholla41272 жыл бұрын
Question I’m buying the pieces for my 2019 Durango R/T do I really need all 4spindles to make the transfer to the srt8 brakes and caliper set
@Sambam19814 жыл бұрын
Where did you find those spindles for your car? I have a Durango gt and I’m trying to upgrade it to brembo brakes and calipers.
@DropTopPerformance4 жыл бұрын
I got mine off a 2010 SRT8 300
@Sambam19814 жыл бұрын
Drop Top Performance thanks man. I’ve been looking everywhere. I can’t find nothing 😂
@DropTopPerformance4 жыл бұрын
@@Sambam1981 yeah I still haven't found rears yet
@gurparveshsingh53482 жыл бұрын
Is it possible to upgrade my dodge charger sxt's factory brake calipers into 4 piston or 6 piston brake calipers ?
@fredlaster105 жыл бұрын
Do you have the knuckle part numbers
@DropTopPerformance5 жыл бұрын
Unfortunately I do not sorry
@fredlaster105 жыл бұрын
Thank you the video well help
@SLICEonCHRONIC3 жыл бұрын
I know this video is old but I'm trying to do this on my 09 charger rt, I have brembo breaks and rotors from a 2017 challenger, what spindles do I need???
@ramshacks94934 жыл бұрын
Do I replace the rear spindles or the front ones
@DropTopPerformance4 жыл бұрын
Both need to be replaced
@nickrichmond19785 жыл бұрын
I have a Durango R/T do I need spindles from a srt Durango For the upgrade?
@DropTopPerformance5 жыл бұрын
I honestly don't know, i wanna say id think you would have to but I don't know for sure. if you find anything out let me know!
@nickrichmond19785 жыл бұрын
Spoke to dodge they said no I wouldn’t need the spindles changed out. FYI
@DropTopPerformance5 жыл бұрын
@@nickrichmond1978 that's good news man that's less money out your pocket 💪🏼
@hemi5.7villain2 жыл бұрын
I'm looking to do something like this for 07 Chrysler Aspen 5.7
@k-fountain1542 жыл бұрын
I know now to look for SRT8 spindles to transform my R/T breaking system
@kendoug57224 жыл бұрын
So its a straight bolt on? On the knuckles?
@DropTopPerformance4 жыл бұрын
Yes sir, super easy and hands down the best upgrade that I have done to the car
@kendoug57224 жыл бұрын
Drop Top Performance any srt knuckles gonna fit on rts?
@DropTopPerformance4 жыл бұрын
@@kendoug5722 yeas they do, my knuckles came off a 2010 SRT8 Chrysler 300
@jrproductions61163 жыл бұрын
Would you happen to remember if the Caliper mounting bolts were the same ones you used to put the brembos on?
@joely6952 жыл бұрын
Question do have to change the spindles? 2 will srt8 brake work fit on on a durango?
@realestateinsider77074 жыл бұрын
Will this work on a 2016 300?
@DropTopPerformance4 жыл бұрын
Yes it will work!
@NAMELESS214443 жыл бұрын
I got a question man why did you need to change the spindle for ?
@HXAJOE11274 жыл бұрын
Nice video. I have a 2013 300 base. Can I use the spindles from a 2007 300 srt ?
@DropTopPerformance4 жыл бұрын
Yes, these were from a 2010 srt8
@223kingsquid2 Жыл бұрын
Can I just use the calibers or do I have to use everything you put on?
@Pizzaboy1452083 жыл бұрын
Do you NEED to change the spindles ? Great vid tho!
@DropTopPerformance3 жыл бұрын
Unfortunately yes because of the mounting points of the Brembos.
@Pizzaboy1452083 жыл бұрын
But would I need the whole arm too or just be knuckle
@enriqueramirez4393 Жыл бұрын
@@DropTopPerformance Is it necessary to change the rear spindles also?
@modernmuscle36586 жыл бұрын
Good work nice job
@arnmoore17053 жыл бұрын
Awesome 😎 definitely have to do this. Good demonstration as well. Definitely subscribing to your channel.
@MGboy992 жыл бұрын
Thanks man! That's was so hopeful, What about the six pistons brake is it the same process?
@hahahahaha86603 жыл бұрын
Music hurt Franky ears 😠 Franky mad 😡
@thedogs58316 жыл бұрын
Woulda just look at that!!!! Better brakes to make a boat stop!! Show us more!!!
@2averagenoobs1085 жыл бұрын
Kind of how it works.. Heavier car, you need bigger brakes..
@axeaces23305 жыл бұрын
I want to do this mod so bad but can't seem to find spindles for a reasonable price anywhere. Good deal bro 👍
@DropTopPerformance5 жыл бұрын
Yeah man that's why I haven't done the rears yet. But just be patient and you'll find a set!
@jlrockafella5 жыл бұрын
@@DropTopPerformance why not just replace the wheel hubs and rotors with the SRT8 for those brakes ? Do you really have to do all that in order to have SRT quality front brakes?
@DropTopPerformance5 жыл бұрын
@@jlrockafella unfortunately yes you have to replace the spindles. The mounting point is different for the brembos
@cavitycreep4 жыл бұрын
You wont until people stop buying them up. Supply demand sucks.
@ReptarART4 жыл бұрын
Can I install 07 charger srt brembo full conversion into my 2012 charger rt ?
@whatsrt14904 жыл бұрын
That's what I need to know!
@DropTopPerformance4 жыл бұрын
Yess, so these came off a 2010
@DoubleYellow8575 жыл бұрын
Late to the party but I love the video! Great job with the install. Now that you've had it for a year do you think it would've been better going with the 6 piston Brembos?
@DropTopPerformance5 жыл бұрын
Not late to the party at all! 😁 but yes I will be going with the 6 Pistons once I Cam and supercharge this build. Then once I get the 6 pistons I'm gonna give the 4 pistons away to a V6 or RT in need😁
@DropTopPerformance5 жыл бұрын
@MOPARGuy hahaha I'll have to be fair and give everyone a shot😁
@momo-yz4lu5 жыл бұрын
Drop Top Performance yes to me thanks very much definitely in need of those.
@hemirt78603 жыл бұрын
I really want to do this to my 05 Magnum R/T!
@DropTopPerformance3 жыл бұрын
You should, honestly the best mod I have done to the car
@roc92654 жыл бұрын
Link?
@813Productions6 жыл бұрын
I need Brembos in my life, Im always on Cleveland pick-a-part's site looking for the right price lol!
@DropTopPerformance6 жыл бұрын
Its an awesome upgrade for sure!
@bluealien47445 жыл бұрын
check lxforums from time to time
@menafode10275 жыл бұрын
i have the same ones and the rotors how much u offer?
@RuffOverlord16 жыл бұрын
Are you gonna do the rear?
@DropTopPerformance6 жыл бұрын
Yes i will just waiting to find a good deal on rear spindles, but not in a rush they aren't as important as the fronts lol
@richstar925 жыл бұрын
Everything is bolt on .
@jalalelatfi57695 жыл бұрын
Do I need to get new spindles and will the new breaks fit over the stock R/T wheels?
@cavitycreep4 жыл бұрын
Total cost? i must have missed it. I might just go Mopar big brake kit like the popos use
@DropTopPerformance4 жыл бұрын
I sourced all my parts and was really patient. I believe total was about 800