BREMBO BRAKE KIT INSTALLATION ON V6 CHARGER (DIY)

[@casas-manana2620]

Wow! This video is amazing. I have a Durango but this gives a good example of all the components and process with very detailed and clear video closeup of everything. Luckily my planned Brembo mods do not require a steering knuckle swap.

[@stevenaaron6889]

Nice install but why you didn’t show us the back?

[@Ghetto187Murda]

Where there any fitment issues with the stock wheels on the SXT after the Brembo upgrade from SRT8?

[@wreckitralph3153]

I have a 2019 charger scat pack and it came with a 4 piston caliber but I want to swap to a 6 piston caliber do need a whole new spindle or knuckle??

[@getfdaz1]

Nope that’s a direct swap, no need to change anything but the rotors and brembos.

[@wreckitralph3153]

Thank you Jose

[@hasankhalid1204]

@@getfdaz1 I have the 2013 charger R/T do I need to change the spindle knuckle to install SRT brakes ?

[@getfdaz1]

@@hasankhalid1204 yes sir.

[@hasankhalid1204]

@@getfdaz1 thank you How much does it cost by your side?

[@jonathancardenas5075]

Super helpful instal bro. What car did you grab the brembos from?

[@ricardopineda8831]

What about the rear set of brembos? Need any swap out parts to install ?

[@hemirt7860]

Thanks for this awesome vid!!

[@SacaLaBolsita512]

Love the video. Very thorough. 🫡

[@COACHHELLYEAH]

Awesome work man! I just bought some front Brembos for my shaker now I need spindles with a knuckle. Any idea where I can find them for a good price? thanks again.

[@DarthRaider]

Where did your buy the calipers

[@expeinppz7331]

I was wondering How much does it cost this amazing job.

[@dvii24dd]

I did the same swap but my ABS and traction control lights are in why is that

[@andersonlopez9721]

🔥🔥 that blue 🥵🥵

[@princemann7166]

Why did you change the whole hub assembly, i just want to install brembo brakes on my charger sxt v6

[@Baktuthamoney]

Nice brake installation Jose 🔥🔥🔥🤟🏾🤟🏾🤟🏾

[@getfdaz1]

Baktuthamoney thank you appreciate the support and follow.

[@Baktuthamoney]

Always my brother

[@wj4show]

Which model should I pull from for a 2014 challenger v6. Trying to go two piston

[@eunit08]

Looking good. And I see yall squeezed in arm day as well 💪😎

[@ed_rt]

😎🔥🔥💪

[@Flareside94]

Hey buddy. Great video. where is your shop located? Hopefully in the New York area lol

[@espinozakelly69]

When changing out calibers is that the best time to change out your coil overs wanting to lower my car

[@frankiewhite9174]

do the spindles and knuckles need to be changed on the Durango as well i keep reading that its a direct bolt on.

[@canyou_heminow]

How much does an install like this cost if you have all the parts for the front and rear. Just a ballpark estimate for labor?

[@treal7228]

Can you post a vid for the rear swap as well

[@ZxSkyLineKidxZ]

So cool. This is the same for the Challenger SXT Plus?

[@deleted6343]

hey man so my 2019 charger gt came with brembo brakes does what brake pads do you recommend

[@LuLu-gu8jz]

Okay I have a lot of questions because I’m trying to make mine a track car sleeper.

[@jdigitalseven7]

Gonna need a different car if you have a challenger/charger. They weigh too much to be a "sleeper". 4600lbs+ at least.

[@Savii-Jo]

@@jdigitalseven7 okay mustang pfp. In that case you’re gonna need a new transmission preferably a 10 speed because (I’m guessing) your manual is slow af.

[@Shanbo]

Just purchased the 6 piston Brembo for my RT. Can I use the same brake line from the RT.

[@kennethstodghill8059]

Are u using a hellcat front knuckles

[@wilmertorres3359]

Did you use the same bolts from the old caliper to mount the brembo?

[@khalil1531]

Is the hellcat knuckle the same on chargers and challengers? Is it the same part?

[@ModFXCustoms]

Yes they are interchangable

[@khalil1531]

Mod FX Thanks man

[@alex89amateratsu21]

Can you plz let me know which pieces do I have to buy to upgrade my calipers

[@isuzooms]

great video

[@johnsmith-qz4bv]

nice work can u use 17 inch rims with these brembos..?..

[@DarthRaider]

Where can I buy the calipers?

[@Kiaboys392]

This is the 4 piston front brake kit. I’m interested in doing the 6 piston front & 4 piston rear but I don’t know what additional parts I need. I also don’t know much about the parts u can upgrade like a swaybar? For my sxt

[@ramshacks9493]

Hi I got a 2013 Chrysler 300 V6 what year does the brembo brakes have to be so I can order them or is there a website that comes with everything

[@theaboveaveragejoeshow8425]

They have brembo brakes for the model year 2015 and up as well as 2011-2014 model year. You need the ones for 2011-2014. I recommend buying some offline at a discount stripping them down clean them put new rings and seals in them and then get them installed. I’m upgrading my 2017 5.7 Daytona. I’m getting them powder coated though before I put them on

[@ModFXCustoms]

You can but the Brembos from any of the SRT/Scat pack models of the similar cars. Challenger/Charger/300 etc.

[@alexross5620]

Great Vlog as always question I know on the four piston Brembo knuckles you can put a 6 piston Hellcat caliper my question is is Bo 14 392 Challenger charger Knuckles the same as the 15 on up so it'll boat right up without changing the knuckles basically can you book a 6-person caliper on a Ford piston knuckle as you can on the newer SRT

[@SnakeheadRT]

How do you swap the rear ones for a Brembo upgrade

[@elcatrin78]

Nice video man. Thanks. Do you also need to replace the rears to add the brembo’s on a r/t?

[@Daytona-dz9xe]

Idk if its too late but as long as you have 20 inch wheels you should be good

[@lilsamreactions507]

@@Daytona-dz9xe so if I got 20s I don’t need a kit?

[@MelloLoMane]

@@lilsamreactions507if you got 20s you still need a kit, but if you have smaller than a 20in wheel then the brembos won’t fit at all. The brakes would be too big and would hit the wheel and you wouldn’t be able to drive

[@hustlegame5069]

How much is the total price to this brembo swap?

[@EyeinTheSkyWallsHaveEars]

where are you located

[@AlmightyKenSELFMADE]

I have a 2018 charger rt and I bought four piston brembos calipers it was able to go in the front with sport rotors but the back wasn’t compatible. what do i need to get the for 4 piston caliper to go The rear wheels

[@hectorcampos5976]

How were you able to fit the brembos on the stock R/T spindles in front?

[@AlmightyKenSELFMADE]

@@hectorcampos5976 idk bout I think it would was it was swapped with srt spindles tho

[@ModFXCustoms]

You need the rear spindles for the rear to work with the brembos

[@khalil1531]

Will a challenger hellcat Knuckle fit on a 17 Charger rt?

[@ModFXCustoms]

Yes correct

[@kiearcotton9452]

I have a 2019 rt and I wanna do this exact same thing. What a-arm do I need to get

[@timwiltse365]

Any year SRT spindle.

[@kiearcotton9452]

Will I need a wheel spacer to do this swap? I saw a guy do it on KZbin and he said he needed a spacer cuz the heels wouldn’t fit after the upgrade

[@BeeTheTrucker]

How much was a setup like this from the junk yard?

[@_GueroPerez]

Do i have to do the same if I want to add brembos to my 2017 Jeep Grand Cherokee?

[@zeush5.783]

Don’t you need spacers for your tires ?

[@johnsmith-qz4bv]

will these 4 piston brembos fit with a 17 inch wheel..?..

[@derottv]

Looking to do this with my 2017 Challenger R/T. All I need is the spindles and knuckles?

[@derottv]

And brake lines?

[@FreeBandsTy]

Did you ever find out ?

[@derottv]

@@FreeBandsTy yea I got it done then traded the car in

[@FreeBandsTy]

@@derottv lol what all you needed for the bembos ?

[@derottv]

@@FreeBandsTy srt spindles and knuckles, rotors, and brembo banjo bolts. U can get new brake lines if u want but the ones that are on there can be modified to work on the calipers.

[@jonathancardenas5075]

Do you know the torque specs for the bolts you had to put back or know where I may find them?

[@tydogfpv7940]

You weren't kidding those ball joints were a headache

[@ed_rt]

What are the torque specs you used?

[@JR-yt5dq]

I have a 2015 challenger with spc control arms to adjust the camber on my d2 adjustable struts. What would I need?

[@getfdaz1]

J R do you have a RT? You need the spindle with A arm assembly and rear also. Hit us up if you need sourcing.

[@theaboveaveragejoeshow8425]

I have a 2017 Daytona Charger just picked up a set of brembos from a 2019 scat charger. I need all four spindles/ knuckles now.

[@HassanRana980]

I have a Dodge Charger GT AWD 2021. Will the brembos go on the rear wheels as bolt on, or do I have to change anything?

[@Quez5k]

I’m thicking about getting a Jeep Grand Cherokee limited X with an 5.7, and I want to upgrade that with the srt conversion. I want to put the srt body/ front fascia, rear bumper, and side skirt on it as well as the brembos with a nice Luh tune and full bolt ons. Do you think it’s possible?

[@darknite2525able]

After installing those brembos is it true you have to tune the car now that there are four piston oppose to two?

[@stevebyrum5571]

I would love to know as well

[@firstpersonscrubs1718]

Where can I buy these products

[@FreeMcWilly]

just realized now after putting Ferrada FR3s on my 2017 rt that the steering knuckle for the scats and mine are different so thats why im rubbing with 6mm spacers -_-

[@rozay876]

Is the 2019 rt non brembo (A) arm has to be replace for the brembo upgrade?

[@jessekirkbride1984]

Can I do the same to a awd 2014 chrysler 300 v6

[@ModFXCustoms]

We have not installed this system on an AWD vehicle. Not sure if it has been done before.

[@luismacfarland6592]

I have a 2018 charger Daytona do I need to swap out the steering knuckles to install the 4 piston brembo?

[@visioncesar9624]

Same here. Did you get it done?

[@terrymitchell4579]

What's the difference between the 4 piston and 6 piston? I want to do the swap on my 2019 chrysler 300 S 5.7 V8 hemi but Idk what to go with Jose? I am adding cam, headers, 3.09 rear end next month and I know ima need something to stop that bad boy....what are your suggestions

[@ModFXCustoms]

Hit me up 281-310-0663

[@wellywell3we]

Wat all I need to convert my 2015 charger SE To Brembo

[@ReggieJaySneakz]

Would it work a 300???

[@ModFXCustoms]

Yes this conversion will work

[@ReggieJaySneakz]

Mod FX okay any year cut off or only new gens ?

[@gianobello629]

Hello! I have a 2016 dodge challenger rt shaker. I bought a brembo calipers from SRT8. Do I need to get the spindles knuckles just like what you did to this car?

[@angelsaldana5941]

Will 6 piston Brembos fit my 2018 Durango rt or do I need a swap?

[@PabloThaGreat]

All these questions not one reply

[@isaacbyrd8504]

I have a 2019 sxt challenger and just ordered 4 piston brembo and roters off 06 srt8 , will I still need new spindles ?

[@supermediumtv7091]

Get some washer and pit them inbetween the screws they fit the srt spidels just fater

[@isaacbyrd8504]

super medium tv thanks bro

[@hammadjawwad2340]

isaac byrd hey did it work by just putting the washers? Wanna do it to my rt but don’t wanna get spindles. Thank

[@isaacbyrd8504]

@@hammadjawwad2340 haven’t tried it yet I need to do more research

[@enriqueramirez4393]

@@isaacbyrd8504 did you buy the rear spindles??

[@dukevbxg6360]

Do they sell a bracket instead of having to change the spindels

[@jeremyrosado]

Hey guys I have a 2018 Charger sxt plus and want to do the upgrade as well can you list the part numbers

[@ModFXCustoms]

Hit us up we can obtain all the parts for you as a kit, roughly ranges from 1400- 1600 for all the parts. We can source it for you as well.

[@jeremyrosado]

Mod FX perfect I’ll be sending an email thanks guys

[@jeremyrosado]

Mod FX sent you guys an email [e-mail]

[@Sambam1981]

Mod FX this I have a 2019 dodge Dodge Durango gt. I want to go brembo or wilwood all the way around. Can you get everything and I pay you for it? All parts. I moved from Atlanta to Arkansas. I’ll pay and can y’all ship it?

[@Thunder24Bolt]

So if I wanted to swap from 14 Dodge Durango rt stock brakes to scatpack brakes do I have to do a complete spindle swap or can I just swap brakes?

[@412AutoCare]

You need Jeep SRT or trackhawk calipers. No need for spindles. Bolt right up. You will need wheel spacers if you have the factory wheels still

[@guillermocorrea9160]

Who can I speak to on getting some work done. Need mods done on my car. Number please

[@ModFXCustoms]

281-310-0663

[@Oxcotton09]

you cant re use the hub bearing>

[@RobertEdits]

Bro doesn’t reply to anything lol

[@robertlopez7061]

He's got a V6🤷

[@johnnynandes8199]

typical ghetto auto shop ... didn't torque anything to spec, the other guy put the ROTOR on the GROUND!! BIG NO NO, and multiple other issues as a mechanic that you shouldn't do

[@keepitthoro6768]

Don't need to do all that 🤦‍♂️

[@raulvaldez7723]

Jose i have a 2017 Chrysler 300s 5.7 do i need to replace the spindle to upgrade to the 6 piston Brembo?

[@getfdaz1]

Raul Valdez yes u need the same as implied in video.

[@LuisMunoz-xe7ik]

Does it use the same caliper bolts as the V6