SSP5 Complete Disassembly

Рет қаралды 11,544

Күн бұрын

Пікірлер: 30

@justinandres6786 3 ай бұрын

Guy: removes outer barrel of ssp super easy Me: "should be easy!" Ssp5: "YOU NEED THE STRENGTH OF A GOD TO TAKE THIS OFF*

@1123Barny1 27 күн бұрын

so true help

@BugsyAdi 17 күн бұрын

@@1123Barny1same here… thinking about buying a new chamber… easier

@isthisthetop_4150 5 ай бұрын

Bro unmöglich den außenlauf einfach abzuschrauben… habs mit Rohrzange etc versucht, da bricht eher was…. Wie soll ich jetzt das bucking wechseln?

@Kan3ManX Ай бұрын

Did u guys make a video on the 4.3plus and how it works to change barrel

@tankprohp 10 ай бұрын

Does the gun need the safety to function or can it be removed

@felix1846 Жыл бұрын

Now that i saw it. Is the SSP5 Lower comatible with the SSP1 ?

@The0rochi 3 ай бұрын

what outerbarrel thread does the ssp5 with orange tip come with and if i do order a new outer barrle what thread will that one have?

@backdada 2 ай бұрын

whoever assembles these pistols at the factory will burn in hell. It is not possible to unscrew the outer barrel without damaging it. I left it in WD40 for a day - it didn’t help. I strongly heated the part to which the outer barrel is screwed, then quickly poured cold water over the outer barrel. I clamped it all in a vice, wrapped it in a thick rag (so as not to scratch it) and unscrewed it with pliers. Still scratched everything. But I unscrewed it... It looks like the parts were painted and screwed together and left to dry. All the threads were clogged with some kind of shit. And it's not loctite. This is not a moving joint, there are no vibrations. NO LOCTITE NEEDED HERE. If you are still worried that the barrel will unscrew... just install a rubber washer (o-ring), etc., and there will never be any problems. To unscrew the screw securing the inner barrel, heat it first... otherwise you will strip the thread instantly. And lo and behold...there is NO need for loctite here either. If you are still worried, use the weakest, small drop of green loctite. And I don’t know why the part shown at 5:05 is needed... it doesn’t hold anything... thank God there is not a single situation in the world where you need to unscrew it. and If you really want to... you won’t be able to. it was fucking glued or welded by some asshole during assembly. but despite all this... the gun is just awesome)

@h.cedric8157 Жыл бұрын

One screw holding the blowback housing?😮

@henryalvarez8700 9 ай бұрын

Yea unfortunately mine came loose while a buddy was running mine and the housing basically blew up

@pyroromancer Жыл бұрын

why does no one explain how they easily push the slide catch out. i cant get it out at all

@glennsowieso2199 8 ай бұрын

The outta barrel is so tide... I can't unscrew it... What can I do?

@l.l1024 8 ай бұрын

i have the same problem, i even used pliers, scratched the outer barrel, did not moved at all...

@ravens716 8 ай бұрын

same issue. even bought a colored barrel to replace it

@yuxiaosun8596 5 ай бұрын

that's what they want，buy another barrel that you need

@damagedtile 8 ай бұрын

So I have looked at both your videos/ disassembly and Assembly, in your Disassembly video the purple buffer is on the end of the spring guide, 5:24 then when you assembled it (9:23)you put the Purple buffer on to the spring guide followed by spring. So which is the correct way to assemble? Please

@shiizo1983 6 ай бұрын

Thank you Sir

@fubene5495 Жыл бұрын

Still waiting for the ssp18 carbine kit to be launched, its becoming a joke every month we visit the web and find the "In Production" logo as always, 3 ssp18 users in my team, waiting for the kit, im pretty sure we are going to sell the gun before you launch the kit XD....