SSP5 disassembly

Created by InShot:inshotapp.page...

[@charalamposkalogeropoulos5494]

great video. is the inner barrel made from steel?

[@JBAIRSOFTIRELAND]

I don't think so it's got a black coating on it could be coated brass

[@i0verlook]

Great video man! Question, Did you manage to reduce the energy to 1 Joule? Is the maximum allowed in Spain with 0.28 bbs. Thanks!

[@JBAIRSOFTIRELAND]

Yes in the end. The guy that owns the pistol was given a 100% guarantee that buying the 6.05mm barrel would solve it, but it was just a sales pitch 🤥 I told the owner it wouldn't drop the joule that he needed the grey lower power nozzle. I told him to complain to the guy that gave him the guarantee and get him to send the grey nozzle free of charge. Both nozzle and barrel have it under 1j

[@stephenwalsh7951]

I'm looking at this to import into Ireland, but I'm not sure what a grey nozzle or a 6.05mm barrel is on their website. Would you have links maybe?

[@JBAIRSOFTIRELAND]

@@stephenwalsh7951 hi yes I believe it's this barrel www.skirmshop.nl/en/morpheus-dual-bore-hybrid-barrel-113mm.html And I think it's this nozzle he was sent eu.novritsch.com/product/ssp1-muzzle-energy-reducing-nozzle/ Maybe you can try NPAS adjustment value www.begadi.com/begadi-npas-fuer-army-armament-kjw-we-hicapa-1911-gbb-serie-cnc-edelstahl-rot.html

[@l.l1024]

the outer barrel does not move. I tried heating it (in case of screw glue), tried using pliers, tried moving one way then the other. It looks like it's completly stuck, it's insane. I'm quite strong, never had ANYTYTHING resist me when i put my strengh, but this outer barrel did not moved 1 milimeter. Do you have a tip ? do you think puting oil on it can help ?

[@JBAIRSOFTIRELAND]

It's very tight. I done it by hand 💪🏻 I didn't want to scratch it up on the guy. I twisted anticlockwise then clockwise until the glue broke. I'd say get someone to heat it and you try twisting it at same time. Tbh no need for it to be like that it's stupid tight 😡

[@The0rochi]

what is your outerbarrel thread cause i got mine in america so i got a orange tip, when i removed it i found out that the thread was much bigger than 11mm

[@JBAIRSOFTIRELAND]

I don't own this pistol it was in to get power lowered, I just filmed disassembly to help people make it easy for them. if you contact Nov customer service they will can give you info about that. sorry I couldn't help.

[@The0rochi]

@@JBAIRSOFTIRELAND i found out the thread they have on their website for the ssp5 works on the barrel and you don't have to purchase a new one

[@JangoBango18]

Great vid- helped me a lot! But I had a question- any idea on how to remove the outer barrrel? It's physically impossible for me.

[@JBAIRSOFTIRELAND]

Remove the spring guide under barrel 1st then you can get a better grip. Twist barrel CW then CCW try break the bond holding it you can do it by hand but it takes a lot of force or get a pair of pliers to it.

[@JBAIRSOFTIRELAND]

If you fast forward you can see how I removed the barrel in this video kzbin.info/www/bejne/rKivp4xsbcSGaqM

[@ravens716]

yeah so i can agree with this. i just hit my outer barrel with a fucking blow torch and i can’t get it off with pliers

[@PNWHockeyTalk]

Thanks foe the great video! Do you have any tips on how to get the front slide off? I've been trying and trying, but I can't seem to get the pin pushed from the right side of the gun in such a way where I can pull that slide catch out...

[@JBAIRSOFTIRELAND]

You need to pull back the slide to a certain point, the notch in the slide is very small and the slide catch is tight.

[@PNWHockeyTalk]

@@JBAIRSOFTIRELAND Ah, that’s it!!! Thank you so so so much!!! Subscribed!

[@JBAIRSOFTIRELAND]

@@PNWHockeyTalk your welcome 🤜🤛 thank you for sub 👍🏻

[@adriallompart4087]

no esta la pieza negra al revés osea la negra delante y la morada atrás en el muelle ????

[@JBAIRSOFTIRELAND]

Sorry I don't understand and can't translate the text to English

[@ItsyaboiSalvadorDolly]

Alright. I reassembled mine (4.3 plus) and now the slide won't go back to neutral on its own. Anybody have any advice?

[@JBAIRSOFTIRELAND]

Check all part's are lined up and in correctly strip it back down and start again

[@JBAIRSOFTIRELAND]

If you record a video putting it together. upload to your channel I can see if you are missing something when you reassemble it.