Stabilizing pine cones and casting in resin

  Рет қаралды 496

William Kenny

William Kenny

Күн бұрын

Пікірлер: 38
@DougMilleratWoodSpunRound
@DougMilleratWoodSpunRound 3 ай бұрын
Beautiful blanks. Your daughter will love her new pen.
@William_Kenny
@William_Kenny 3 ай бұрын
Thanks very much doug, I hope so, Thanks for watching mate 👍
@MikeHolton
@MikeHolton 3 ай бұрын
Thanks for the video Will, never used cactus juice or a vacuum chamber before so this is all great info for when I have a go, thanks so much for sharing! 😃
@William_Kenny
@William_Kenny 3 ай бұрын
Your very welcome Mike, it's all new to me also, I found Jake Thompson a great source of info for stabilising and casting, Appreciate you watching mate, Kind regards From Will 👍
@JennifersCraftCreations
@JennifersCraftCreations 3 ай бұрын
They look really nice William Take care Jen 😮
@William_Kenny
@William_Kenny 3 ай бұрын
Thank you very much Jen I've a long way to go 😁 Cheers From will 👍
@joeribak
@joeribak 3 ай бұрын
Beautiful pen blanks Will! So thoughtful a gift for your daughter. Great video. Cheers ! Joe CA
@William_Kenny
@William_Kenny 3 ай бұрын
@joeribak thanks very much Joe appreciate you watching, Will 👍
@joeribak
@joeribak 3 ай бұрын
Of course, my pleasure! Thanks to Mike Holton for recommending.👍🏻
@William_Kenny
@William_Kenny 3 ай бұрын
@joeribak cheers, mate Mike is a true gentleman 👍😊
@WoodenItBeNice
@WoodenItBeNice 3 ай бұрын
Great video Will and I can't wait to see how these turn out when made into pens. I'm sure they will be spectacular. Take care mate. Cheers, Huw
@William_Kenny
@William_Kenny 3 ай бұрын
Thanks very much Huw appreciate you watching mate, Will😊👍
@AlienLeader4
@AlienLeader4 3 ай бұрын
Very nice video. Hopefully when these get turned you will show the out come. Thanks for sharing. Keep up the amazing work. 👽
@William_Kenny
@William_Kenny 3 ай бұрын
Cheers buddy I'll definitely do a video, Thanks for watching, Will 👍
@annlaurie1484
@annlaurie1484 3 ай бұрын
Very good, well done they look fantastic 😊
@William_Kenny
@William_Kenny 3 ай бұрын
Thank you kindly Ann 🙏 😊
@racheldray1057
@racheldray1057 2 ай бұрын
It was great to see the whole process and they look fantastic. Great job! Nice new toys
@William_Kenny
@William_Kenny 2 ай бұрын
Thank you kindly Rachel, Kind regards From Will 👍
@roystheboy
@roystheboy 3 ай бұрын
Great looking blanks I do a few pens wish I had the room and money to make some, looking forward to seeing the pen made
@William_Kenny
@William_Kenny 3 ай бұрын
Cheers Roy, hopefully I'll get to turn one soon, thanks for watching mate 👍
@danslejardindecytrus
@danslejardindecytrus 3 ай бұрын
Merci beaucoup pour cette vidéo ! 👍🙏
@William_Kenny
@William_Kenny 3 ай бұрын
Thank you kindly 🙏 😀
@danslejardindecytrus
@danslejardindecytrus 3 ай бұрын
@@William_Kenny 🖐🖐🙏🙏
@BBTurning
@BBTurning 3 ай бұрын
That was a really interesting video Will mate, you covered everything very well. Hopefully you will turn one of those on video. Shay
@William_Kenny
@William_Kenny 3 ай бұрын
Thanks very much shay I will definitely be turning one and a video, looking forward to it , Will 👍
@BBTurning
@BBTurning 3 ай бұрын
@@William_Kenny Can't wait to see how they turn out mate. Shay
@mashmade-airth
@mashmade-airth 3 ай бұрын
Hi Will. Well you know that I've just started turning & I'm still building up my kit but resin work does interest me & I can see myself playing about with it in the future. I don't know much, in fact anything really, about it so I found this video very interesting & informative. I will need to look into a pressure pot & find out how they work, how to operate them & what other bits of kit I'd need to do so. I already have a compressor so I suppose that's a start. Thanks for the info'. I enjoy all your videos but I really enjoyed this one. Cheers Will 👍🏴󠁧󠁢󠁳󠁣󠁴󠁿
@William_Kenny
@William_Kenny 3 ай бұрын
Cheers buddy. appreciate you watching. I'm very new to all this as well so we'll all muddle along together, Cheers From Will 👍
@andykargans2885
@andykargans2885 3 ай бұрын
Fantastic content again William, keep up the great work. Are you allowed full fat milk in your house,…. I remember those days,
@William_Kenny
@William_Kenny 3 ай бұрын
For sure 😁thanks for watching Andy, Cheers From will 👍
@PeteTwistedTrees
@PeteTwistedTrees 3 ай бұрын
Oh William, William, what a dangerous path you tread 🤣
@William_Kenny
@William_Kenny 3 ай бұрын
I know pete but it might be fun 😁
@inspectr1949
@inspectr1949 Ай бұрын
What keeps the pine cones from floating?
@William_Kenny
@William_Kenny Ай бұрын
I trimmed them up so they were a tight fit in the moulds, and also they were stabilised so a little bit heavier than normal, sometimes one might float so I just put a bit of scrap wood on top for a weight, Kind regards From Will 👍
@andykargans2885
@andykargans2885 3 ай бұрын
Have you ever done corn cobs, never done casting myself, but will get there at some point
@William_Kenny
@William_Kenny 3 ай бұрын
Never done them Andy, Never done any casting before it's all new to me😀
@joeribak
@joeribak 3 ай бұрын
Corncob husks make for very pleasing pens. Husks need to be free of corn and seeds of course. And definitely dry and maybe Cactus Juiced!
@William_Kenny
@William_Kenny 3 ай бұрын
@@joeribak sounds intriguing 👍
How to Stabilize Pine Cones, and Is it worth it?
13:07
Jake Thompson
Рет қаралды 12 М.
Ozoda - Alamlar (Official Video 2023)
6:22
Ozoda Official
Рет қаралды 10 МЛН
Making a Gourd Lamp
23:39
Gourdlandia
Рет қаралды 1,5 М.
Epoxy vs Urethane Casting Resin
15:08
Eric Strebel
Рет қаралды 95 М.
Stabilising pine cones
17:38
Danum Blades
Рет қаралды 18 М.
Woodturning - Sphere We Go Again
15:43
Jack Mack Woodturning
Рет қаралды 131 М.
Easy pinecone casting using Lizard Mould
5:58
Highlandboxes
Рет қаралды 7 М.
My Best Project! I Had to Drink Wine for 3 Weeks to Make this Table
18:00