Starlink DC Power Supply

In this video, we check out the new Starlink DC Power supply, Perfect for Off-Grid and RV Applications. With a wide input range of 10 to 30-volts DC it's ideal for 12-volt or 24-volt RV electrical systems.
🛰️Get your Starlink Dishy DC and use the promo code "Everlanders" for 10% off:
boondocker.io/products/dishy-...
Download and Print the Dishy DC Enclosure here:
www.thingiverse.com/thing:589...
These are the crimpers and Wire Ferrules I have: amzn.to/3KTt21Q
I printed the case with our Ender 3 V2: amzn.to/3nXRndW
⏱️Chapter Markers:
0:00 Welcome Back
1:00 In-Motion Data
1:25 Q&A - Does the App Still Work?
3:23 Q&A - Does it Work While Driving?
4:45 Q&A - Is it still Fast when Flat-Mounted?
6:20 Tips If you are getting less than 100Mbps
7:55 The 🤩NEW🤩 Starlink Dishy DC Power Supply
9:15 An Overview of the Connections and Functions
11:34 Dishy DC Enclosure Design and 3D Printing
15:15 Final Installation and Wiring
16:18 Testing and Performance
📈 My Speedtest.net results:
www.speedtest.net/my-result/a...
www.speedtest.net/my-result/a...
www.speedtest.net/my-result/a...
www.speedtest.net/my-result/a...
www.speedtest.net/my-result/a...
www.speedtest.net/my-result/a...
www.speedtest.net/my-result/a...
www.speedtest.net/my-result/a...

[@heatherm4276]

It took me 5 seconds to order this! Now if I could only find someone with a 3D printer.. BTW thank you for putting this info out there, I would have never found this if you had'nt. Cudos to you on all the solutions that I have seen so far. Great design on the box too! I am excited to get mine in the mail.

[@anthonyvalmassoi]

I can print and ship you the case for it.

[@heatherm4276]

@@anthonyvalmassoi I purchased the case that Boondocker provides. But if you can print the case for the dish to make it sit flat I would be very thankful. Just let me know what the cost would be!

[@jackg8478]

@@anthonyvalmassoi i would like one of possible. How much would it cost?

[@Everlanders]

I just got a quote from PCBway.com for ~$20 www.pcbway.com/rapid-prototyping/3D-Printing/3D-Printing-FDM.html Dishy DC Front Cover V1.1 - Blank - No Remote.STL Qty: 1$ 19.91

[@heatherm4276]

@@Everlanders I wonder if they could also do the piece that makes the dish flat mount?

[@bencorrado]

You went from great unboxing videos to great reboxing videos!

[@Everlanders]

Ha ha! I've never thought of it that way... 🤣😂

[@sensiblenomads]

Also than you for putting the files to build the box online! Made my life a whole lot easier to figure this part out! 🙏

[@sickjohnson]

So glad to see a new video from you guys! Can't wait for the next one. Hope you are doing awesome.

[@OliverAllpress]

Really enjoying your mod series on the starlink! Thank you

[@palharley]

Another fantastic video! No half ass install, once again I bow down to the fabulous level of detail. Great job 👍

[@Sylvan_dB]

Seems like a great addition. I love it when companies use a wide input (12/24v capable) power supply!

[@dougle03]

Excellent. Love it when small enterprise does something the larger boys are seemingly incapable of doing. Great case design too, very professional.

[@joplattner]

Did you order one?

[@markmonroe7330]

As always, very well done video. These are absolute gold.

[@joell439]

Blown away with every technical episode. So many very clever and smart people out there. I appreciate the inspiration. 👍👍😎👍👍

[@4x4ready]

Super helpful, pre-ordered one immediately. Thank you!

[@justin555666]

I’m building a van right now and JUST got to the electrical stuff. Perfect timing for this! Already did a preorder.

[@macwmcel8430]

Thanks a lot!!!! I love your knowledge with Starlink!!! 🎉

[@patlandy21]

First Class Content!!! Outstanding subject matter and very well presented. A real pleasure to watch your videos!!! Thanks!!!

[@dand3d173]

Finally on its way cant wait thank you .look forward to more of your videos .

[@vasylbo1555]

I love the handwritten subtitles and translations!

[@CarryMegens]

Thank you so much for your thorough and detailed information and those handy 3D designs shared for free (!) with the world. Greatly appreciated. Can't wait for all parts to arrive and start assembling! Your videos are the best!

[@larryreno8293]

I wanted to say thank you for putting together so much valuable information regarding Starlink and it’s ability to function while flat. Also the DC power supply and printed enclosures are truly great information. Good luck with you wandering and be safe. You’ve earned another sub.

[@tardsat]

Thanks for the subtitles! They make it easier to watch your videos while my wife is on the phone.

[@kbs7340]

Brilliant. You are the man! Thank you 💖

[@qfour22]

I appreciate the closed captioning. Thank you for the videos.

[@globaldemise]

You are ridiculously talented! Wow! Thanks

[@papaludwig]

Thank you for the subtitles, btw! I hadn't noticed the comment asking for feedback on them the first few viewings, but for sure appreciate having them and the effort that must go into doing them by had!

[@stevenfaber3896]

Great video, bells on! Thanks for the community effort. I must say though, I think your setup is particularly nice, as in it has its rake (if any, it's small) mounted towards the front of the device, and you are typically up on mountains. folks on plains or in valleys often, may also gain an extra edge with sparing a thought towards their vehicle to how they can "point" it better.

[@KirkThomson]

Oh my gosh, you are brilliant! I just got an RV and really want to use my Starlink with it, but hate carrying around the dish on the trip. I am going to study all your videos before I attempt this. Thank you!!

[@skipbaccus]

Jason, I just love the intro music played with fanatical zeal! Oh and this video is being implemented immediately for my humble overlanding vehicle!

[@5Flaash]

Appreciate all your effort to bring us Numpties the benefit of your experience. Great channel

[@dathat555]

The handwritten subtitles are much appreciated.

[@tra757200]

I really love folks like that. Need something not available, build it! Very cool video.

[@fpvshenanigans]

This is pure gold!! I have just ordered a starlink roam and started looking into beat ways of mounting it flat. A ton of good info, thanks a lot! I will be following those for sure.

[@nicovanzyl1979]

😂😅

[@fudaldeath]

This is so smooth. Thank you for sharing.

[@AdamandAtlas]

You are a GOD tier problem solver! Every solution you come up with fixes a pain or inefficiency that us Van/Bus/Overlander builders can only dream of creating. Thank you for putting these solutions out there for the masses in a clear and easy to follow medium. You're the gold standard of quality rig designing and you make the community a stronger, more informed place. Thank you! P.S. I will someday incorporate a modified version of your extending solar panel array design into my rig, no matter how crazy those around me think I am!

[@jgegere]

Problem solved. Surround yourself with more crazies, then you just feel normal.

[@ytluckynuts]

You are the best. Thanks for all the help and explanation

[@MrPardal]

Thank you for sharing this content with us. I just finished my motorhome recently and I have two batteries of 230amps each one. When I plugged my starlink and started using with my 1000W frequency inversor along the day I realize that I would need a solution like this. My batteries was almost discharged at night.

[@fatchunk3678]

I’m so glad I found your channel

[@domipro123]

You're a rocking handy genius !

[@lithtweezie1]

Great, Great video. Even though everything you did is WAY beyond my skill sets - I love it!

[@whereswardlaw]

You are my new hero!!! I just found you while looking for Starlink hacks... But then I found RPi tricks, automation stuff, 3D printing... ❤❤❤... You've given me so many project ideas already and I've barely started watching your vids. Have wanted a 3d printer for a long time, you may have just pushed me over the edge... Needs to be small cause we full-time in the states in our RV. Towing a Jeep for overlanding excursions. That Ender looks like a nice entry level machine. Would like to mount that Starlink on the Jeep too for our Backcountry trips. Keep the brilliance coming! (Fixing your throttle peddle with a fan potentiometer! In the middle of nowhere! Brilliant!!). Subscribed and notified! Cheers Eric

[@nicholaswilliams5587]

It’s possible that this is the best thing i have seen in 3 years…. And nice work on the case design! That definitely took some time!! I only make simple things to print or download because I don’t have your skills!

[@NimblyJimbly]

So awesome! I'm not a Starlink user, but thank you for making your designs free for the community and for putting so much detail into these videos. Would love to see another 3D printing video... maybe with some expansion on your tips/tricks for printing with multiple filaments to do inlays, etc. Very very cool stuff!

[@Everlanders]

Glad you like them!

[@JohnLaFosse]

At home, I ordered fiber internet at 1gb for about $79 once my street was wired for fiber optics and on certain machines I’m at about 100M and it’s still very useable compared to spectrum or Comcast whim I’ll never go back to. To have 250m in Ecuador is insane. Worth it.

[@Mike_In_Idaho]

When you said, "You don't want to let out the magic white smoke", I could tell you definitely knew what you were talking about. Then you showed the printed box and free design and I clicked subscribed. You are a boss!

[@alexandrojv]

OMG can't wait for the next one!!! love the after credits reveal!!

[@freakyou123]

Buying one just right now. Thank you for the tips. Hugs from Brazil

[@garrykennedy5653]

Love your work, well done

[@sl3rtyb3rdf3rts]

Hi Jason, the crimp, I had this problem as well so double thanks for pointing that out. My new Starlink plug was good turned out just the patch from the BoonDocker to the Mobile Router.

[@RicardoSicks]

Most excellent.. thank YOU!!!

[@hardwiredcustoms2301]

Pre ordered ✔️ Code used ✔️......Thanks guys 🙌🏽

[@WEsail]

Dude you are amazing, thank you for this!! I know how much work goes into this!!

[@TrustMarkHandyman]

Thank you , only just found you but great, helpful vids

[@JoaoAmadoTV]

Great Video. Thank you for your time and sharing information with the comunity

[@Everlanders]

No problem 👍

[@RogerDiotte]

I'm getting sucked into the proverbial KZbin Glamor Hole and I'm glad I'm being sucked in with you! I love this kind of content...I do have Starlink(first gen dish) via a Ubiquiti Wireless link from my barn I managed to setup but your detail is so soothing to watch and your easy on the eyes and ears!

[@tomrmalcolm]

Freedom Units!? I love it! 🤩 Outstanding video. Really appreciate the transparency!

[@edwardthomaswalker]

ordered. thank you!

[@cyclemoto8744]

Very generous as always, sharing your knowledge and work with the community. Thanks for your time and content. Cheers from OZ. PS: I don't even own a Starlink (yet)

[@RyanAdamsVideo]

I was just finishing my last section of the flat mount you designed and this new video popped up urging me to give my money away for a nice goodie to make dishy run on DC! So happy to see this and even happier for the case you designed and shared - THANK YOU! THANK YOU!

[@Everlanders]

That is awesome!

[@dariocuriel8940]

I’m new and barely looking at some info what are the benefits of using DC? Not use an inverter?

[@Everlanders]

Half the power consumption.

[@HammerRocks]

Fantastic bit of kit. 👍

[@ZoltanNeverRests]

100% agree about CHECK your RJ45 crimps. I too have quite some experience doing those and when I did the conversion above I had about 8 fail on me.

[@chrisgentry4427]

That is really awesome. Very very VERY awesome!

[@juebaitube]

Thanks a lot for sharing ❤.

[@kylea.2114]

I was an aircraft electrician and have performed many crimps and I messed up 2 as well when installing a shielded passthrough connection in my travel trailer. I checked all 32 points with the multimeter for continuity and shorts before trying to use the cable. Annoying but good piece of mind before plugging it into the expensive dishy.

[@TheMisterNomad]

Great stuff, as usual!

[@sl3rtyb3rdf3rts]

So nice that you have published the files the video alone was nice on it's own, I've ordered two supplies using Everlander thanks again.

[@Everlanders]

Hope you enjoy it!

[@sl3rtyb3rdf3rts]

Just arrived today just in-time for our road trip. Thankful also for you pointing out the "X Swapping"@@Everlanders

[@Everlanders]

Uhhh no, if using the Dishy DC, nothing is X-Swapped, all connectors are standard T568B

[@sl3rtyb3rdf3rts]

Bit of a late reply but I did figure what you meant otherwise I'd have x swapped it Been all over Europe with this set up now. Looking to go flat mount next :-) @@Everlanders

[@marpa0]

Great work man!

[@a.g8517]

super idea. thank so much

[@jphoenix133]

Sweet, ordered it immediately!

[@sailcat42]

did you get it yet I ordered mine 3/19/23 no show as of 7/23??

[@Moist_yet_Crispy]

My bell is on! Always love your video!

[@carry2web]

Thank you so much for your excellent video's, answering questions and your perfect 3D models. Starting my mods of both the flat mount and the Dishy DC soon 😅 but confident with your instructions 😊

[@Everlanders]

Awesome, thank you!

[@TheMowogman]

Thank you another great channel to subscribe to. I run a FaceBook RV community with 7500 members many of those now jumping into Starlink ownership. This 12v solution is a big thing as we Free camp a lot in Australia. I have posted this video and the flat mount video in the Group. I have also ordered the 12v Kit. Thank You

[@Everlanders]

Super!

[@koryyyy]

I installed your design 4 months ago! :) my van is far from being finished but it has internet anywhere. Thank you so much for your time, your design, everything

[@Everlanders]

Nice work!

[@phurious_george]

Whelp, yet another great find! Just got on the list myself!

[@Everlanders]

You're going to love it!

[@Introverted_Outlander]

This is really really cool running the star links standard system off my solar battery bank was killing my battery back in four hours of course the built-in inverter is inefficient

[@electrified3407]

@Everlanders I may never have an RV, Starlink or a 3-D printer, but I enjoy & appreciate your content just the same. You mentioned that the POE board had design decisions that oozed with thoughtfulness. I must say, your videos ooze with thoughtfulness. All the inserted pictures that clarify everything you're talking about. The links to the products, the chapters and the Chapter Markers you provide, it's the definition of thoughtfulness. I also want to make it a point to say that I greatly appreciate the subtitles and translations. I watch everything with subtitles, because it isn't always clear what the speaker is saying. Although, I don't have any problem understanding what YOU are saying. Your voice and your speech are easy to hear and understand. I greatly appreciate your wit and your style as well. You really put out great content and a great product. Even though I'm homebound, I will continue to enjoy your content. You give a lot, you have attention to detail and thoughtfulness. I can't think of another site that I frequent that does so much or does it so well. I have subscribed to your channel. However I NEVER get notifications from KZbin FOR ANY of the channels I subscribe to.

[@Everlanders]

Thanks, I needed to hear this right now.

[@ChronicSurfer]

Wow! Sub and just wow. Thank you so much!

[@anthonymarino4260]

enjoyed it very much. thanks.

[@Riddick_4506]

Damn, eveytime I watch you. I swear your a legitimate GENIUS!! WELL DONE!

[@Everlanders]

Very weird, my mom always says the exact same thing! 😜

[@Natahalem]

Your channel deserve way more subscriptions than 57K.. I was looking for solutions to get stable internet in my 4X4 RV and was deeply digging into 5G/4G LTE's routers specs, eSIM was my only hope to allow me to travel abroad "easily".. Totally skipped Starlink's solution few month ago because it wasn't actually realy suitable for RV. But your precedents videos showed me i was wrong and solutions exist. So... i've subscribed to Starlink (and your channel).. Preorder a DC Dishy board. And my printer is actually finishing the first left corner for my antenna support. Thank's you for your content !

[@Everlanders]

Amazing!

[@SeamusWassman]

Thanks for the great review. Excited for Matt's new converter, was surprised when I found out it was made/developed in my home port (I live on a sailboat). I like the 3d printed cases, might have to get a buddy to print me up one.

[@Everlanders]

I just got a quote from PCBway.com for ~$20 www.pcbway.com/rapid-prototyping/3D-Printing/3D-Printing-FDM.html Dishy DC Front Cover V1.1 - Blank - No Remote.STL Qty: 1$ 19.91

[@Adventuredriven]

Great video, well done. I ordered mine today :)

[@everestmartinez132]

Hello, thank you very much for the video, very productive, you mention the PoE which is the maximum distance supported by the UTP cable

[@Rustlerbear]

Thank you.

[@chuxxsss]

Well done, looks really good.

[@timsanchez2860]

Excellent! Thanks

[@johnwhatley]

Thanks for continuing to help the community. (Comment submitted to please the algorithm gods.)

[@jamiehamilton1340]

Hi, just came across this video. Thank you so much for the awesome content and how-to's! Would it be possible to share the CAD file for the backing plate? I need to have mounts outside of the case (mounting options are limited) and need to put screw mounts outside the perimeter of the case (I hope that makes sense!). Thanks again and keep up the great work and content!

[@SVAdAstra]

Thanks!

[@DIYDaveT]

Excellent vid. Thanks for sharing it.

[@Marlow925]

Ordered. Thanks.

[@joshuajaynes88]

I was literally about to put together a dyi thing myself than watched this video and just ordered the all in one. I will 3d print your design, that thing looks awesome.

[@Everlanders]

That is awesome!

[@user-zd8jb6qr2p]

Fantastic video. Very clear and well thought out. Just ordered a power supply. I work wildfires in BC and have found the Starlink amazing. Since I change support vehicles I plan on making this into a little kit to easily move around. Now looking for a small efficient PoE router to use with it. Since I need to place the antenna in different locations depending on where I’m parked I will keep the cable full length. Also want the ability to go back to the original router when around AC power so am looking to make an adapter to go from the existing cable to the new power supply. Just need to find the right female connector. Thanks again for pointing me to a great starting point!

[@harmanaulakh7529]

Unappreciated hero! Thank you for your service battling wildfires

[@user-zd8jb6qr2p]

@@harmanaulakh7529 thanks for the comment. Very rewarding work.

[@michaelnewnham3156]

Legend! Also ordered. You cost me a lot of money! Now to order the mofi!

[@TrotteleGlobe]

Hi I’m Max from Switzerland, actually in Alaska with my RV and family, full timer since two years and far from Nikola Tesla with my zero knowledge in electric stuff. And English is not my mother language too😝. Thanks for sharing your knowledge and files through your videos. I’ve a flatmount Starlink and I want to convert it in 12 v. But I’m not sure to understand everything… First question: With the system presented in this video we have to change the routeur or we can still use the Starlink one?

[@obijuan-]

Excellent Video. Thanks for doing this. And for talking about the P.S. w/link

[@Everlanders]

Thanks Mr Juan!

[@yksilotaso]

This is a great channel! I don’t know how KZbin algorithm hide this so long.

[@richardburguillos3118]

THAMKS! Just placed my order. Looks like I’ll have to wait till sometime after Sep 25th for the next build series.

[@Everlanders]

It's currently more like 2.5 months out...

[@richardburguillos3118]

@@Everlanders 🥺😭

[@IvanFT_]

Great Stuff!

[@adonisperdomo5998]

Gracias por los subtitulos! Lo mejor!

[@Everlanders]

¡Me alegro de que los hayas encontrado útiles!

[@bobwojcik6196]

You’re awesome!!

[@magnoliathebus]

Our home and native land comes through again! 🥰😛

[@Everlanders]

The best!

[@xfernandez11]

I know you’re preaching to the RVers, but we boat people are also part of the choir. Appreciate it! Gonna have to scrub through your last video again and looking forward to the next so I can see how to run the Starlink router from DC as well. Would love to run that rather than a DC router for the sake of simplicity.

[@RyanDickersonVb]

Interested as well.

[@hammer-r]

Great that the KZbin gods got me to this video. New subscriber. I’m in the market of buying a starlink for our RV for part time use. I was gonna buy a inverter so I didn’t have to cut wires and screw around with the cables like you mentioned. One question, with that converter box your friend made (awesome by the way) do I use the starlink cables to the starlink router? Or do I buy a 12 vdc router and standard cables for the ports on that magic box. Sorry kinda new to routers and the wacky way starlink wires it. I’d appreciate any input so when I buy my stuff, I do it right the first time. Can’t wait to see your other vids on your travels. I’m jealous, I only stay in the Colorado and Wyoming area when I’m out. Tks again