Starting Reed's Talaria Sting R Build! /// Warp 9 Parts!

[@jeffj5710]

Dang, u guys r pumping out the content!

[@lyonsclassicpinball9807]

Any chance you can show the full install of the Warp 9 Stem Lock? You show knocking out the star bolt and then jump to putting the direct mount stem on. How tight does this need to be? Are my spacers going slightly above the tube and then tighten the nut on top(how tight?). Does not look like there are any instruction or pdf's for this. You guys do stuff fast, some of us need to see it slow. Thanks for all the great content!!!

[@Talariaboys]

Yes spacers go slighly above steer tube, tighen tight but nothing crazy tight.

[@HummerH-mo4cs]

when reinstalling the front fender did you have to drill a hole in the fender to fit over the bottom of the stem lock ?? some other vid showed that. Seems weird to do that.@@Talariaboys

[@cliffxy_3462]

@@HummerH-mo4cs talaria boys just replied to my comment about the Fender. They answered it their

[@rlbrett]

Talaria Boys, I watched a video yesterday about a guy riding a Talaria; he switched his chain for one that wasn't as stiff. He claimed he was able to get about 4 mph increase in maximum speed. The video looked convincing because it was a before and after type with both chains.

[@yevgeniylankin7032]

I’ve swapped to a non o ring chain and noticed as well I had to use less throttle to get to same speeds prior. You’re basically removing a restriction on the chain and getting a much smoother and easier acceleration.

[@cliffxy_3462]

Great video! Quick question: how did you put the front fender back on because doesn’t the warp 9 stem lock pops out a bit from under. Did you drill a hole into the fender?

[@Talariaboys]

We just put it back on normal except it sits lower because of the stem lock, the bolts are barely long enough still but we put blue lock tite so they wouldn’t come out from vibration.

[@cliffxy_3462]

@@TalariaboysThankyou

[@Nobody___]

I got the warp 9 axle block but it didnt quite fit into the grooves on my month old mx4. Im gonna hit up their customer support and I just went back to the og axle blocks after installing my 54 tooth sprocket

[@coolshariq]

That bike looks so sick 🔥🔥🔥 blue KO will looks so good on it good work guys 👍 I am waiting for my Talaria sting R to come next month I can't wait.

[@jonathanisraeli7180]

It’s a good day when talaria boys posts

[@johnmorrison27]

Looking good team 👍

[@someonesaidstfu]

Thanks guys for the videos!

[@garrettjohnston7705]

Could you guys drop the links to where you got everything like you did in other videos? I’d like to get all that stuff

[@JoseDiaz-uv6sj]

Same :)

[@brianlewis5359]

I have a question?. can you use the warp 9 handlebar mount with a xxx display? it looks like it wont fit but havent tried yet

[@ha1l2th3king6]

Congrats Reed! I know you guys do mostly off road riding, but would you consider doing a video with supermotos?

[@Talariaboys]

We have some on the way! We will make the video soon.

[@HummerH-mo4cs]

Hey T-boys great videos !! .Question ... Any new front light ideas lately. Not really feeling the GritShift Blinder. Thanks again !!

[@Talariaboys]

We have been custom wiring in some pod lights from china but it requires some trial and error and custom wiring

[@Sherman1862]

I just ordered a Warp 9 16 inch wheel w Black Rim/Gold Hub/Black Spokes/ Gold Nipples, 60 tooth sprocket and Gold Chain, no O Rings. Plus 4 inner Tusk inner tubes from you today. Was wondering what Knobby you'd recomend for the rear.. I ride lots of hard dusty clay soil in northern California, gravel sand loose sand .. Look for a light beefy rear knobby that would fit my new E Ride Pro SS 2.0 ... Any thoughts would be higly appreciated. Thank you! : ) I read d a review saying the no O Ring chain was noisier.. Hope that's not the case.. lol

[@Sherman1862]

Hope that 60 tooth sprocket on 16-wheel isn't too Volatile, twitchy, aggressive on E Ride Pro SS 2.0? Is it too late to change my wheel build if so?, just ordered it today? Thank you! : )

[@Talariaboys]

Thanks for your order! I think you’ll be just fine with the setup you chose!! I think I replied to your email about tires already

[@retrothruster2539]

Love the chain tensioners. I have the same bars on the gritshift riser stem, I like your warp9 stem better, what did you screw the top cap down to since you drove out the star nut? I'm going with the 48 tooth rear sprocket for now, I'll upgrade possibly later to a higher tooth sprocket, I can wheelie over stuff with the 44 so maybe the 48 will give me a touch more snap. Great vid guys as usual!!

[@louisvivas]

My sting r is coming tomorrow 🎉

[@adampampalon3840]

Was there any issue putting your front fender back on seeing how the stem lock sticks out a bit on the bottom? Thanks for the content!

[@Talariaboys]

We just tighten the bolts as far as they can go with the stem lock in the way. You should use lock tight to keep them in place.

[@ha1l2th3king6]

Do you guys have any tips or recommendations to get the brake pads to not rub on the rotors when you first get these bikes? I've tried so many different things and I cannot get it set to where it doesn't rub.....front and back.

[@freerfixedit]

Try centering your calipers… loosen the 2 Allen’s holding the calipers on, squeeze the brake lever and hold it while you tighten the caliper bolts back down. This should center the caliper and make it to where there is equal space between the pad and rotor, and prevent scrubbing

[@phat56pat]

OK boys I have a question my talaria R is on the way I am going to switch to 17 inch wheels. I was wondering what rear sprocket would keep the same 53 mph TopSpeed as the stock wheels have.

[@Talariaboys]

With 17 inch wheels I believe a 40 tooth sprocket would be the closest to stock speed.

[@phat56pat]

@@Talariaboys really I would have thought bigger?

[@Talariaboys]

No, smaller wheels make the top speed slower so you need a smaller sprocket to go faster. Bigger sprockets make the top speed slower but have more torque.

[@jordanberardi15]

Did you guys have any problems with fed ex delivering the bike ? mine says it has a delivery exception. and i hope it still arrives on time.

[@Talariaboys]

We didn’t have any issues, hopefully you can get it figured out!

[@leemorgan7118]

Yo, When will u be doing a 72v battery upgrade and controller upgrade. That will be exciting

[@Talariaboys]

Won’t be long 🤫

[@bduals207]

Hey does that bar mount from warp 9 stop it from rotating on the forks? Like does it bolt to the triple tree?

[@Talariaboys]

Yes it’s a direct mount stem so it mounts like you said, we use the warp 9 stem lock as well which really ensures everything stays strait! The bike feels really solid up front with this setup.

[@AdventureContinuesAgain]

What exactly does the stem lock do? I have a direct mount stem and just used the existing steerer bolt. Am I missing something?

[@DaBinChe]

since the fork is a bicycle design, the headset is preloaded by the star nut inserted into the steer tube. The star nut isn't as solid, can give and loosen from the vigors of a motor/heavy bike that a star nut was never designed for. The stem lock clamps down from a "nut" that inserts from the bottom of the steer tube so headset holds it preload

[@AdventureContinuesAgain]

@@DaBinChe Interesting info. Do you think some sort of clamp on the steerer tube where the spacers are would work? Kinda like a seat post clamp....

[@DaBinChe]

@@AdventureContinuesAgain That is how a bicycle handlebar clamp works. The star nut only preloads but does not hold the actual forces that is why when you do the direct mount/top triple tree bar clamp you have to do the stem lock too.

[@RobertF-cs7fx]

Hey, comparing to the stock sprocket, does the 58 tooth sprocket make the power come too fast and does the rider have to be more careful when increasing the throttle?

[@Talariaboys]

Yes the power comes on much faster and you need to be careful to not wheelie over backwards, If you arent planning to upgrade your controller I wouldn't go larger than a 52 tooth on the sting R

[@RobertF-cs7fx]

@@Talariaboys Thank you for your input

[@elevator-_-6083]

Thinking about getting the 52t on my Sting R. What chain linkage is needed for it?

[@Talariaboys]

110 link for a 52.

[@elevator-_-6083]

@@Talariaboys Thanks.

[@johnwilkes8847]

Does the 110 chain need to be cut to fit the 52t or is it a direct fit?

[@Talariaboys]

110 is direct fit but most chains come 120 link so you’ll need to cut it down if you don’t buy an exact 110 link chain.

[@joshfletcher3140]

can u show us in a video exactly how much slack u should have in your chain

[@freerfixedit]

kzbin.info/www/bejne/iKCZZXiph9RsfrM

[@sdashk]

Hi new to the talaria game. Does the riser bar make the riding position more comfortable?

[@Talariaboys]

Yes it definitely makes it more comfortable.

[@TBJ_X_VISUALS]

Quick question, does the sting and sting R have the same frame?? I was curious because I was lookin for a decal kit and they obviously don’t have them out yet. Lmk thx guys great content 🤙🏽

[@Talariaboys]

Yes the frame is the same and all existing decal kits will work! We are working with Sticker FX on some custom kits coming to our channel soon, If you buy from their website, this link you can use the code TALARIABOYS and get 5% off.www.stickerfxgraphics.co.uk/

[@TBJ_X_VISUALS]

@@Talariaboys awesome thx bro. I actually make decals so I’ll probably print my own but I really needed the measurements. I have the the old sting measurements so we’re good. Ya keep killin it and making content and I’ll watch guys. Stay up and stay safe.

[@WillAppel-w4g]

What pegs do you guys use? I’m hopefully trying to save up for a talaria mx3 but it is so expensive.

[@Talariaboys]

We all use warp 9 pegs. If your on a budget I would recommend Luna cycle pegs

[@WillAppel-w4g]

@@Talariaboys thanks

[@ryanbraccialini888]

You said you were running your chain at 110 link with the 52 tooth sprocket but the warp 9 web site on there little table says 108???

[@Talariaboys]

The chart on there website is for a Surron, the talaria is usually 2 links longer.

[@ryanbraccialini888]

OK cool got it. Thanks

[@ryanbraccialini888]

Dang those guys at warp 9 didn't give you a discount code for us lol.

[@Talariaboys]

Sadly they did not. There stuff is worth it though!

[@J_25325]

Wish ya woulda shown the steps and actually showed install on the axle blocks

[@untasty4215]

How tall are you guys? Im 6'2 and worried the Talaria Sting R might be too small for me

[@Talariaboys]

Lance is 6’3 and is happy with how it fits, Reed and Alex are 6’ ish

[@realkidcarter]

DUDE WHAT ARE THOSE PEGS

[@Talariaboys]

From warp 9

[@realkidcarter]

i just want to know that they will fit 100%@@Talariaboys

[@realkidcarter]

i literally went through all of yalls video trying to see if yall talked about them once@@Talariaboys

[@realkidcarter]

no, the ones on the mx4 in this video, i think i've found them on ebay, suzuki pegs i ordered them@@Talariaboys

[@Talariaboys]

The pegs I had in this video were from Alibaba, they did not fit very good so I upgraded to warp 9 pegs later

[@jerome7372]

my dudes!!

[@elroymullins2384]

Come help me work on my Talaria R MX4, please, guys😅

[@Talariaboys]

You got this my Friend just follow the vids! Thanks for the support!

[@marcturner3150]

do you have an email address...thanks...marc

[@Talariaboys]

[e-mail]