Wow. This is a very cool concept. Thanks for showing this one.
@FLSportsman3 жыл бұрын
Thanks Doug, we really liked it! Simple and affordable!
@Rob_Basich2 жыл бұрын
Nice product. Prices seem very reasonable for the quality and detail.
@JJ-yv6zy2 жыл бұрын
Product looked exactly what I needed. But was concerned about how it would anchor in hard sand bottom. I found this video & when I realized you were fishing in my backyard, Sailfish Point & Stuart causeway in the back ground I got the impression hard sand was not an issue as most of the flats have hard sand there. Got my product, had to wait for hurricane to pass & finally got to try it. It is not going into the sand that easy and just slides along the bottom. Was there a trick you did not show in the video? Did you use a Hammer or something to drive it into the hard sand? Any advice would be appreciated.
@oscarsuarez9917 Жыл бұрын
bought the motor bracket and comes out after 5 min with min waves, it works better without the bracket because the bracket pulls it put of the water with the movement of the waves.
@fretwellhomes85035 ай бұрын
Tie it down with a bungee or dock line to the mount, works perfectly and wont raise up
@scottparker62193 жыл бұрын
these are basically spud poles which they have been using on duck boats for years, I have a set on my duck boat which is aluminum and they just welded a bracket on the front and back so I can stake it out.
@Dademold2 жыл бұрын
In heavy waves stick will break due to rubbing in bracket.
@yogibearyogibear7229 Жыл бұрын
What about just 2 on the front
@alanploetz71003 жыл бұрын
The poles look plenty long. How do you lock them down when you're on the move or, more importantly, away from you boat?
@FLSportsman3 жыл бұрын
Each extension can be unscrewed, allowing you to disassemble. The initial pole is 6', and offers 2' and 4' extension options. I imagine they would fit nicely in horizontal rod holders or under the seats in the front of your vessel when disassembled. If you want to keep your pole assembled or don't have an area conducive to fit the pole, here are some suggestions for mounting or tying down: www.floridasportsman.com/editorial/how-to-use-push-pole-alone/399637 Hope this answers your questions!
@alanploetz71003 жыл бұрын
@@FLSportsman thanks. Helpful info.
@chevy4x4663 жыл бұрын
I was wondering the same. I suppose u just store it with the fishing rods.
@MrSUPERHUNTER963 жыл бұрын
What is the model of that boat?
@892lamar3 жыл бұрын
Its a Sportsman 214
@CarlosMedina-gq5eu3 жыл бұрын
Hi capitán 🇵🇷🇵🇷👍👍🤗🤗
@FLSportsman3 жыл бұрын
Hey Carlos, I see you! 🙂 🤙🏽
@golfcoursetrailcam38302 жыл бұрын
Matt: Looks like the numbers on your boat don't have a space between FL and last two letters. I do like your product just something I noticed that will attract attention from Da man.
@herygarcia61933 жыл бұрын
Did anybody else notice the sharks?
@FLSportsman3 жыл бұрын
👀 time stamp, good sir?
@bigchvy91923 жыл бұрын
Don't work for a boat bigger than a flats 22ft. But yea cool product
@FLSportsman3 жыл бұрын
A lot of people use these on bigger boats in combination with a powered stake anchor to ensure the boat won't swing.
@sharonbraselton313510 ай бұрын
What about small 22 foit cabin cruserr big waterr deapth
@sharonbraselton313510 ай бұрын
Says 24 feet maxium soo 22 footer bigest.
@kateskrmetta20223 жыл бұрын
First comment hi
@FLSportsman3 жыл бұрын
Hello!
@soflo_justin9343 жыл бұрын
Lol when someone comes flying by you it ain’t holding down nothing
@rafjackiedelalcasrin78503 жыл бұрын
Not worth the money!!!
@AmazonWebService983 жыл бұрын
can make something urself for like 100
@FLSportsman3 жыл бұрын
Not everyone is engineering inclined, or has the time/energy to dedicate to a project like this. If you do make something along these lines, I'd be curious how you go about it. Film and share with the class, please. 😊