The Scotty Regen really needed to be disassembled and parts removed inspected and cleaned up. Some parts had to be replaced. Re-wiring with period correct Double Cotton Covered wire.
Пікірлер: 30
@gretalaube915 ай бұрын
Great project! I also have an old early 20's regen that shows it's lineage probably back to a single tube build. I can see where someone grew an audio stage and crammed in an "amplifying transformer". I had to "fix" the ACME transformer because the bee's wax had some impurities and corroded the fine frog hair wire. ...probably will break again somewhere. It uses a UV200 for regen and a UV201 for audio off a single B+. It also has a variometer tickler arrangement, and no antenna tuning, and linear variable capacitor that covers 500-1500 kc in one swoop. It is DSC wired, although the "old" regen part is wired with a funky "square" naked bus wire. I have never seen this before! So, even though it could benefit from a rebuild, I chose to leave it for techno-archaeological interest. 73 ES GB Sam W3IHM
@MIKROWAVE15 ай бұрын
I have a breadboard 3 step 01A amplifier with that same square bare buss wire that is looking for a restoration video.
@JCWise-sf9ww6 ай бұрын
I can see why you had to disassemble the SteamPunk radio, in your hands this regen radio will work better than it did in the 1920's.
@johnwest79935 ай бұрын
Back to the beginnings of the history of electronics. I like it. I recall opening my Arborphone 27 receiver, looking at the bottom of the chassis and thinking it had been stripped. But it hadn't. There simply wasn't anything to it.
@MIKROWAVE15 ай бұрын
Tubes have a lot of gain with simple transformer coupling. Trying to do it with less costly parts usually drives up complexity.
@jerryuhte12846 ай бұрын
Looking great sofar Mike,keep going ! Tks !
@atmylab5 ай бұрын
“Push-back” wire, very cool, first time I have heard of it; I love your channel, thanks for the great videos.
@MIKROWAVE15 ай бұрын
Push-back wire is for those of us who are to young for Strippers!?!
@robertlabarbera55466 ай бұрын
Thanks again Mike..great content as usual..good, slow methodical camera work that truly helps a novice (or professional) understand what you are doing. All this old, institutional, classic radio engineering has been lost and very little appreciated today. Keep up the great work!
@MIKROWAVE15 ай бұрын
Final video goes up Wed. Thanks for watching this series.
@whippoorwill11246 ай бұрын
More excellent content, Mike - thanks. At 7:35 try putting your hand close behind the grid leak, palm facing the camera, so the lens will autofocus and show the component's innards more clearly.
@MIKROWAVE16 ай бұрын
Yes that old Cannon was not happy, and lighting helps but it does not cure everything!
@clytle3745 ай бұрын
I need to build one someday, but I have too many projects already and just getting caught up on this series.
@RogierYou6 ай бұрын
Awesome
@alainmichaud89926 ай бұрын
Great video! I have never seen such old components! After one hundred years they are still holding toghetter. I think Bakelite has to labeled a "stable material". Modern plastic will not last one hundred years...
@MIKROWAVE16 ай бұрын
Celluloid was old news by this time and and Bakelite (an early low-cost, durable plastic) was in full production and the world’s most abundant plastic, polyethylene, came by 1933.
@JackKC8QPG6 ай бұрын
Great Video and Information !
@MIKROWAVE15 ай бұрын
Thanks for watching!
@va3ngc5 ай бұрын
I recently picked up a homebrew crystal radio that is in a similar state to this one. It was made from an old AK20 compact, that was seriously hacked (and hacksawed).
@zubrzubr67696 ай бұрын
Hi Mike! I m currently assembling regen for my blacksmith shop
@MIKROWAVE16 ай бұрын
Nice! Great to have an old time technology radio in the shop!
@davidportch88376 ай бұрын
Great job Mike... Looks fantastic... looking forward to hearing it in due course...
@MIKROWAVE16 ай бұрын
Oh it's playing. The tube base plug in coils with the internally hidden tickler winding are fascinating, and I will build one from scratch.
@johnwest79935 ай бұрын
I'd be tempted to set this up for Field Day, and run it off solar panels.
@MirlitronOne6 ай бұрын
Fun fact: early tantalum capacitors had electrolytes so corrosive that they needed solid silver cans. Worth a bit if you can find them!
@MIKROWAVE16 ай бұрын
It amazes me how fast the US, UK, Germany and France created a whole electronics parts industry in such a short time period. I think AT&T came up with the solid electrolyte versions later.
@W1RMD6 ай бұрын
Looks great! When are you going to design the Shih Tzu regen? Interesting history on the tantalum capacitors. I thought they were a relatively new invention. Cool looking cloth wire. Thanks and take care!
@MIKROWAVE16 ай бұрын
I need proper insignia for Badging!
@F104G8264 ай бұрын
Are the 4-pin tube sockets made of porcelain? Also, any idea of the manufacturer? Thanks for the awesome videos!