Steel Braided Brake Lines CRF300L

[@kadunkk]

Beat method is using a straw to create the vacuum. When you taste fluid you're doing it right.

[@TheGardenSnake]

thats how you get ants

[@Nicks_Shop]

I love CoreMoto brake lines, had them on my Katana. The amount of customization possible was crazy

[@TheGardenSnake]

Yeah they're great

[@frankfeng6199]

have them on my drz400sm, love them!

[@DRZWhisperer]

Jake, the abs light needs a sticker, or at least a piece of harbor freight electrical tape!

[@ktmjun_8610]

I opened the dash and stuck a piece of gum in the abs light, now its off forever lol, they are separated by cubicles, each cubicle has an led, I just filled the abs cubicle up with gum so the light doesnt shine thru lol

[@TheKoen1000]

Best bike build vids on YT!

[@whitecompany18]

😂

[@98Kentuckian]

i had a set of these on my Grom, really did make a huge difference.

[@chefcalfwell8532]

Thanks for all your work, always excited waiting for more content to come out!

[@JDelta87]

I've been wanting to replace the rubber lines on my bike with steel braided ones but never actually took the time to actually learn how to do it properly. Now may be the second best time.

[@rachelc6342]

Me and my husband loves your videos! !

[@PBstx1100]

I live for Jakes mechanical sketches

[@Michael-ur4yc]

I had a steel brake line on my old KLR 650 with a single front disc, it was fine, I learned the street on it. I switched to a stock MT 07 with double discs, though it had a lot more stopping power the feel isn't there. I will be replacing with steel lines as soon as I have the funds (getting a mechanic to do it cause its tedious especially with ABS, yes I'm keeping ABS, not turning it into a MTenere 07 lol), but I'm a broke engineering student so, might be a while.

[@mrkarma4209]

Idk anything about bikes or ever plan to buy one but i love watching you put shit on

[@stevereinhart4067]

Use a black sharpie to cover up the abs light. May take a few layers.

[@croscoe333]

Can vouch for the Core Moto brake lines. Just installed a set on my KLX 250 last week. Great quality and feel at the lever and pedal. Will install a set on my MT-09 soon.

[@KHRAIASE005]

could you post the measurements for the custom lines you had made?

[@mal3762]

I'M HEREEEEE FOR JAKEEEEEEE

[@mal3762]

also, I'm getting a supermoto in near future, so all these videos are gonna be helpful in general. Great job Jake!

[@joshuaplantan90]

Steel braided lines aren't worthless, I have some on my car, gives me better pedal feel personally

[@Erstwhile.Freeman]

Yes, in the manual scheduled maintenance says replace OEM rubber brake line every two years. Go steel!

[@matthewfleming9731]

In Australia, any warning lights on the dash are a defect. Some of us might appreciate see how you'd go about turning it off

[@DragonNova]

ECU flash?

[@TheGardenSnake]

It will be a wire in the plug going to the dash. I’ve got a friend down the street with a non ABS. I’ll get his bike over here and figure what wires are missing from his plug that are in mine. That will tell me what wire to unpin. When I find out I’ll post it!

[@Rambone224]

Hey bud! long time follower. Didn't know you had the same Capri brake bleeder. I've been using mine for 4 plus years now in a automotive dealership setting. I got to say it comes in handy more than I thought. Kudos for recommending a sweet tool!

[@JakeG59]

I’ve had steel braded lines on all my bikes, mind you ive never done it myself I think if I had to I wouldn’t do it. But yeah they’re pretty good, I like how they look

[@cristian6766]

Jake you should open the cluster and desolder the led for the abs light.

[@TheGardenSnake]

I can do that from the wires in the back of the plug. Just unpin the right one.

[@ScoutTheBear]

Can't wait for you to do the KLX300

[@tippytailmckitty2658]

I put them on my old CRF 250L and felt the difference in braking. Might out them on my Super Tenere

[@thnksno]

You can also open the bleed screw and let gravity do the work without using the bleeder.

[@petrosspetrosgali]

That’s how normal people do it.

[@nowisthewayforward6252]

Hey Jake , great content. Are you able to tell us the sizes of the front and rear hoses you ended up with?

[@coltonward3609]

Can you also get rotors off these guys? Caliber fell off the two stroke and rotors warped too bad to fix

[@bilboswaggens2975]

Patreon saw it first. I'm just here for the algorithm

[@Minionmoto529]

Motorcycle companies should start watching Jake's videos so they can better improve their bikes.

[@stevereinhart4067]

How many subdivisions are being built around you. You have been riding around them since I started watching you years ago.

[@Hooligan_Vlogs]

What were the measurements for your custom brake lines?

[@-0-___]

If you don’t get brake fade you ain’t trying

[@TheGardenSnake]

thats true

[@rhecyeeyeejake7184]

Have this on the list for my 2020 grom.. its just abs so I might need some help figuring it out

[@LukRider]

can you share somewhere this new tubes length?

[@tvh300]

Can you pull the lamp/bulb for the ABS warning?

[@mezz7628]

So are they going to be selling crf300 brake lines soon? Ive been eyeing them up for a little but noticed they only have the lines for the 250

[@TheGardenSnake]

I'm not sure. That's why I just did a custom order.

[@Razor32061]

black paint pen for that abs light.

[@TheGardenSnake]

haha right, I'll probably pull the wire once I can figure out which one it is

[@TheGorillaBiker]

Do you have HEL brake lines over yonder? I put them on every bike I own(except my CBF cus endless lines cost money 🥲) but I agree, once you out them on good luck not wanting them ever again. Also they look very tasty. The colour scheme is coming together!

[@TheGardenSnake]

Haven’t heard of them.

[@TheGorillaBiker]

@@TheGardenSnake Pretty much the same thing as coremoto really!

[@AlienFoka]

A quick question, how is the speedo working without the speed sensors?

[@ronsexton3685]

Argh! Where do you say about your garage setup? IE, the jack and whatever is in front on the wheel? How can I safely work on the bike?

[@Spartan375X]

Liked for epic drawing.

[@cristian6766]

Nice! :D😍

[@coryforrest9188]

What lengths did you get for your lines

[@FilipSSFilmStudios]

You kinda look like Sergio Perez

[@jacobdoudna8219]

Don’t forget to like and comment!

[@glazedandconfused4756]

Is it possible to have ABS on just the front wheel? Or is it already front only?

[@liamfoley4452]

I thought you’d be using DOT 5 for brake fluid. I was told going through school that DOT 5 was the standard for bikes

[@TheGardenSnake]

Always go with what it tells you. In this case it was “dot 3 or 4”

[@petrosspetrosgali]

Just curious; why didn’t you just get a crf WITHOUT the ABS? Wouldn’t that save time and money?

[@TheGardenSnake]

None available

[@eduardomargutti]

13:43 What ratchet model and brand is this ??

[@tatmanmyownbossdannydraco]

That intro 🤣😂

[@paule5812]

‘Murica 🇺🇸

[@googenhiemer613]

coment

[@RedEmpire36]

Raymond Chan of Apex Brakes is cheaper than coremoto and same quality. Everyone in the stunt group uses him, he makes to whatever your specifications are.

[@TheGardenSnake]

They don't do stiffener tubes, you need that

[@RedEmpire36]

@@TheGardenSnake yep good point I use him for my Tenere 700 and stunt bikes, my XR I ended up with coremoto for front

[@joshuaplantan90]

Hygroscopic is the word your looking for

[@whitecompany18]

😂 Hydroscopic .... The clue is in the 'Hydro'

[@mrt9941]

Installing braided brake lines with regular (non race spec) dot 4 brake fluid and criticizing engineering explained 😂😂😂

[@TankToChest]

Steel brake lines feel better than some random girl giving you a compliment in the wild…

[@TheGardenSnake]

hahaha thats good