It's worth mentioning that you are using the JK version of the Falcon stabilizer as the JL connects to the stock axel location and cannot be used on aftermarket track bars. Also, the Steer Smarts track bar is 1-5/8" which is important when ordering the stabilizer.
@leethompson70492 жыл бұрын
Thank you this is what I needed to know and couldn't find anywhere on Northridge or Teraflex web sites.
@dl99553 жыл бұрын
Just wanted to say thanks for all your videos. All your doing is costing me money!!! Teraflex CT3 Apline 3.5" lift, Falcon SP2 3.1 and that was just for starters. Still adding to our JL build with your videos. My wife loves it all, her Jeep and my $$$$. LOL She just thinks I'm doing it for her. 😉 Thanks again, now I need that steering stabilizer you just put on.
@jeffreyforbes27333 жыл бұрын
I have the Steersmarts Yeti XD HD drag link flip, Adjustable Track bar, an Tie rod bar installed on my 09 JKU. Need to get them installed on 19 JL.
@MaxQ298913 күн бұрын
Noticed you had a strap attached to the track bar mount to maintain spacing/distance: why did you NOT mention this before re-mounting the steering stabilizer? Good vid but show it all please.
@MindisJurenas2 жыл бұрын
Just instated SteerSmarts YetiXD TieRod, DragLink, TrackBar and their steering stabilizer on my JLU. Sooo much beefier compared to stock parts and crawled amazing in URE
@Ihavetopoop7189 ай бұрын
What are the red caps and rubber gaskets you left on the table during the install?
@shawnshawn49912 жыл бұрын
Just installed this tie rod 1/8” in ( developed a Death wobble) was reading a jeep thread said to adjust to 1/8” toed out. Worked a lot better. 2011 jk 2 door sport 3” lift 17” wheels 35x12.50.
@michaelcriswell6459 Жыл бұрын
Steer Smarts recommends .5° total tow out
@taraaaron12423 жыл бұрын
You will regret that teraflex bar. They keep having issues. Enter to go with the whole kit from steersmarts
@northridgenation3 жыл бұрын
What issues have you had?
@josealferez63763 жыл бұрын
Correct, I'm having issues with mine. There's a lot of noise and play when moving the steering wheel.
@northridgenation3 жыл бұрын
@@josealferez6376 Whats moving? Can you post up a short vid?
@harryallen4572 жыл бұрын
The Steer Smarts Trackbar won’t clear an ARB Diff cover.
@timflaherty27315 ай бұрын
If you had to pick one to fix the "slop" in the JL steering, would you replace the Drag Link or the Tie Rod? Either way, the Sector Shaft Brace is recommended right?
@northridgenation5 ай бұрын
We would pick the one that is the most worn. The sector shaft brace kit is a great addition, especially if you have the aluminum steering box. If you have the steel steering box, we would replace the tie rod and drag link first.
@ShaneSellsRealEstate3 жыл бұрын
Did you get the new mopar steel steering gear box?
@davidbowles6070 Жыл бұрын
Do you guys carry the Teraflex trackbar bolt that you used in this installation video? If so what’s the part number please?
@northridgenation Жыл бұрын
We normally use the Fox stabilizer bolt, unfortunately we are currently out. We do have more on the way: www.northridge4x4.com/part/track-bar-brackets/803-02-028-fox-racing-track-bar-bolt We do have some of the Synergy track bar bolts in stock: www.northridge4x4.com/part/track-bar-brackets/8806-01-synergy-manufacturing-track-bar-stabilizer-mount-stud
@Ihavetopoop71810 ай бұрын
How did you torque the drag link bolt @ the pitman arm?
@da.vo.675811 күн бұрын
this is exactly what I just came to this video to look up!
@Ihavetopoop71811 күн бұрын
@@da.vo.6758 crows foot on your torque wrench is about the only way. Otherwise just get it tight
@MrNewtoGuitar8 ай бұрын
Good video but could have done without the annoying music.
@leethompson70492 жыл бұрын
The link in the description for the steering stabilizer is for the stock configuration. Is the model number that you used in the video the one for the JK model number for 1-5/8” tie rod? Part # 01-02-22-110-158
@northridgenation2 жыл бұрын
Yes, that's the one! www.northridge4x4.com/part/stabilizers/01-02-22-110-158-falcon-nexus-ef-2-2-adjustable-stabilizer-1-5-8-tie-rod
@SynysterGoose2 жыл бұрын
Will the steersmart stabilizer tie rod mount work on that falcon?
@northridgenation2 жыл бұрын
It would work with this one: www.northridge4x4.com/part/stabilizers/09-02-22-110-000-teraflex-falcon-nexus-ef-2-2-fast-adjust-steering-stabilizer And this one: www.northridge4x4.com/part/stabilizers/09-02-21-110-000-teraflex-falcon-nexus-ef-2-1-steering-stabilizer
@SynysterGoose2 жыл бұрын
@@northridgenation awesome. Thank you 🤙🏻
@dunnoyolo22388 күн бұрын
How does it compare to APEX chassis parts ?
@weefoochen85 Жыл бұрын
This can use for rhd jeep wran3 jl?
@northridgenation Жыл бұрын
Yes, just turn it around.
@stealth000000003 жыл бұрын
Where Can I get the falcon track bar bolt? Is it included in the falcon stabilizer box?
@northridgenation3 жыл бұрын
We have the Fox stabilizer bolt in stock: www.northridge4x4.com/part/track-bar-brackets/803-02-028-fox-racing-track-bar-bolt
@anthonyaguila89362 жыл бұрын
are those drag link and tie rod pre-grease?
@northridgenation2 жыл бұрын
Yes, they come pre-greased.
@ReConGrpTx3 жыл бұрын
That drag link you pulled out wasn't a factory drag link.........Just sayin. #Teraflex
@northridgenation3 жыл бұрын
The track bar is TeraFlex, the drag link was an OE drag link.
@ReConGrpTx3 жыл бұрын
@@northridgenation OOOPSIE.....my bad. I stand corrected :-). I should pay more attention.
@northridgenation3 жыл бұрын
@@ReConGrpTx No worries, thanks for watching and commenting.