Step by step custom race helmet

[@santoshkalburgi1077]

superb, its awesome....I would like to know which type of paint is required and what type of airbrush to be used for helmet paitings?

[@whitelx50]

You did a great job bro, ignore the haters. Keep up the good work!

[@adscustoms4602]

Thanks mate mean alot that and they is a lot more on iys way just sorting them out

[@praying4America43]

He done a great job!! He can't help that a customer requested for the helmet to look that way but he done a wonderful job!!

[@adscustoms4602]

Selfie Somone 2 thanks

[@adscustoms4602]

Sabrina ! Thank you, the customer was very happy with the finished result

[@Patriot_Drone_Services]

Nice job. Did you say you “bake” between coats, as in heating in an oven, bake? At what temp and how long do you “bake” the helmet? if I understood correctly.

[@stevetrimmins2129]

Great work. Looks like a character off of Flash Gordon. Ming's imperial guards.

[@adscustoms4602]

Thanks

[@kimpoverArtsSTUDIO]

wow! very informative sir. this is good i love it!

[@harnedi0007]

nice job. 👍🏻👍🏻👍🏻

[@racingislife15]

What type of paint are you using for this?? That looks fantastic though!!

[@adscustoms4602]

I use air brush paints I will send you a lick to them and stand base coat as it a good paint to start of with

[@perrinevandenberghe6261]

@@adscustoms4602hey! Great great job! I just started riding myself and would love to learn How to customize my helmet. I have a silver fiberglas helmet. What do i need for this? What kind of paints and other stuff? Thanks in adcance.

[@sub-arts128]

well done. what performance has your exhaust equipment? is is not dangerous to cut direct on the helmet?

[@adscustoms4602]

Hi it is if you go through but if you take your time and only put soft cut lines in then you should be ok to go

[@collinunderhill2121]

How do you get the lines on the left side exactly like the right side? Nice video 👍

[@BlueYoghurt]

Hey, do you know what the name of that green line..? I want to buy it.

[@kerryclark1926]

He measured.

[@kerryclark1926]

@@BlueYoghurt It's called "Fine Line" tape. A lot of different widths.

[@ColliAirbrush]

good job brother.....very nice

[@ItankArtDesigns]

Oh yes thank you 😂😂😂

[@iramanuel3377]

not sure if you guys cares but if you are bored like me during the covid times then you can stream all the new series on InstaFlixxer. Have been watching with my gf recently xD

[@ColliAirbrush]

@@iramanuel3377 🤔

[@maysondamian4231]

@Ira Manuel Yup, I've been using instaflixxer for years myself =)

[@nathanaelharlem2517]

@Ira Manuel yea, have been watching on InstaFlixxer for years myself =)

[@kerryclark1926]

Looks good, but I would have liked to see the entire helmet. Next time do a slow walk around. Thanks.

[@sociallydanjr2163]

What kind of pencil is that? Can you paint on it?

[@tomthomsen990]

How can the making stay on so long and not tear the paint off with the tape?

[@adscustoms4602]

Hi Tom if your doing a metallic or fakes I do a very clean coat of clear coat over the top and bake it if you doing a flat pain colour then you will be fine

[@tomthomsen990]

@@adscustoms4602 sorry, I meant how can the masking stay on so long.

[@tomthomsen990]

@@adscustoms4602 also looked like bleed through on the zero (in black). How did you address that?

[@adscustoms4602]

@@tomthomsen990 some of the masking I buy has different levels of tack on them. I use the least tacky for these

[@adscustoms4602]

@@tomthomsen990 I rub the transfer across my trouser leg quickly to take some of the tack off. Then stick it down and apply two dust coats. Hope this helps 👍

[@colsinclair7793]

Is wet sanding necessary❓

[@adscustoms4602]

I do wet sanding as it flats it all ready for the next lines and pictures to go on

[@colsinclair7793]

ADS Customs thank you👍🏻

[@michaelwhite8226]

No scuffing the coats or did I miss something

[@adscustoms4602]

Hi yes I bake ever coat and I flatter every coat before doing any other lines

[@carlosgooglemaps94]

Good way to fuck up a good helmet!!

[@firatsonmez]

Hello What band do you use?

[@adscustoms4602]

I use a site called bensounds why mate

[@lifeinchina7758]

great job.

[@adscustoms4602]

Thanks

[@todayweride4779]

A video tutorial without the bullshit music. Nice Job would like to see the whole helmet! Well done

[@chrismcginty3687]

How much do you charge for paint job on helmets as want hicky trooper helmet doing

[@adscustoms4602]

Chris Mcginty hi mate do you want it painting as a pictures of would you like the hole helmet moulding to the shope of one

[@chrismcginty3687]

ADS Customs either tbh email me at [e-mail]

[@CHIBA280CRV]

Fantastic job thanks

[@adscustoms4602]

JOGO thanks and thanks for watching it got a lot more to come just got some editing to do

[@lw4santo]

very nice tecnique!

[@adscustoms4602]

hEljAk :D thanks 👍😁

[@BlueYoghurt]

What a name of that green line..? I really want it...! Pls

[@thatonecarguydirk4803]

Its called Vinyl tape

[@BlueYoghurt]

@@thatonecarguydirk4803 Thanks!

[@guspowell9185]

Sorry, but whilst the finish might be good the layout isn’t. Lettering isn’t central to the lines, and not symmetrical round the helmet.

[@alexsandropereira7724]

👏👏👏

[@cdsouthern]

Does that say "Your Last"?

[@adscustoms4602]

Chris Southern no i have got many more videos to come just got to editing if thats what you mean

[@ssamotorsfinland]

Cool helmet but not good video. Way too much spraying and no walkaround...

[@adscustoms4602]

Thanks and sorry about that I am going to put a link in the bio soon showing around the helmet

[@lustfrei5535]

TOTALLY HORRIBLE !!! IT WAS A BEAUTIFUL HELMET BUT WITH THIS PAINT HE IS DESTROYING !!!

[@missydee6085]

It wasn't destroyed, you plank: it was skillfully created to fulfill a customer's requirements. Beauty is in the eye of the beholder.

[@justindwyer3832]

lust frei I agree. Good painting skills. Horrible design. Looks horrible

[@CaptainScarlet1961]

So where are all your video's showing you can do better, have you never heard the term "The Customer Is Always Right" ya donkey!

[@Hunter_S-fr4ns]

Breaking every PPE and COSHH law going .. 🤒

[@adscustoms4602]

Luker mc Thanks for pointing this out, although I do know! I've done my research and I explained this to the customer yet he still wanted this design.

[@parischarles]

You’ve wrote ‘Your last’ instead of ‘you’re last’ 😂

[@Keefoh]

Is this a joke?? Are you all fucking stupid?? It's ment to be "your"... It's not, "Live every day as if it was you are last" that's what "you're" means you Muppets.

[@Jake-ji9lf]

Keith Hackman 😂😂 plonkers

[@mathiasm3462]

looks awful