Step By Step Guide To Cleaning Your RZR! UTV, ATV, RZR Foam Cannon

You guys asked for it, so here it is. This is how I get my RZR from completely covered in mud to showroom in only a few short hours. This video walks you through step by step how I go about cleaning my RZR and the products I use to get it clean. Don't forget to subscribe to the channel!
#rzrwash
#rzrfoamcannon
#rzrcleaning
Join Us On Facebook! / xmargh
Join Us On Instagram! xmargh
If you like the video then please hit the like button, share the video and subscribe to our channel. All videos shot in marked trails in Northern Ontario Canada.

[@rick8910]

That 303 is great stuff I've been using it for over 15 years now. Another one that I will use if don't have the 303 is Turtle Wax Ice it works pretty good and is dry to the touch as well. Plus it's a little cheaper and you can pick it up at CTC .

[@XMARGH]

Good to know!

[@ehTV1000]

Man that cooler rocks, hell the whole damn unit rocks really. Very informative as always buddy, your a great speaker.

[@XMARGH]

Thanks Mazz I appreciate it! The cooler works really well! Super happy with this RZR. Few things in store for it too!

[@mrsbethlewis2011]

SC1 works beautifully. Alot of people in the community recommend it

[@stimul81]

I really appreciated your video. The products that you are using has saved me a ton of money trying products. Thank you.

[@XMARGH]

Brandon Waldrop Glad the video helped you Brandon!

[@edgargomez8662]

looking for and looking for a way to properly and effectively wash my Polaris RZR ..... I found your very good video ..... I practice, so it is easy to understand in the real world of mortals .... good video thanks for sharing

[@XMARGH]

Edgar Gomez Glad it helped you! Thanks for checking out the video!

[@DonsATVAdventures]

I use the Lucas Speedwax or Lucas Tire Shine and have had great results and neither leave oily film band the dust doesnt stick to the plastics either, plus when i was the atv after the mud falls right off with little effort . Seriously considering a foam cannon though but for years iv had great results using Simple Green mixed with water in pump type garden sprayer and it actually works good. I always get compliments that our 2 Grizzly's look brand new.

[@XMARGH]

Sounds like you got it figured out! Honestly products are all personable preferences, whatever works for you. I'm now using Hybrid Ceramic Wax on my new Turbo S. Works Amazing!

[@DonsATVAdventures]

@@XMARGH it can get expensive using using some products. A few people i know use that MucOff stuff. I bought one bottle of the soap and saw no difference. It cost me $39 for one liter where the Simple green costs me $18 for 4liters and to me it works better i think so its a simple decision for me. Like you said its comes down to personal preference.

[@XMARGH]

@@DonsATVAdventures The marketing is strong with some products ;) I still use E303 on many plastic items including the inside of my car but the Hybrid Ceramic wax has the durability.

[@mrsbethlewis2011]

I'm new to the community. I have a Polaris turbo rzr xp 925. I hand wash mine cause I am afraid of getting the battery wet under the driver seat.

[@Mike-je1bg]

Iv got a polaris ranger, my engine is under the dump box in the back! Is it ok to spray down the engine its getting really dirty! Is there any parts that i have to b careful when pressure washing my machine!

[@XMARGH]

Its definitely okay to spray down the motor, keep a safe distance from the motor itself not to get to close to put excess water pressure at the components. You can also use a degreaser. Spray it on let it soak for 5 minutes then work it in with a brush and spray it off. These motors are meant for harsh elements.

[@MrHeadquarters]

what about the Air filter vents and the belt vent? i lurry about spraying water on it afraid im going to get water down on my belt on in my air filter. when you wash it do you try to avoid direct spraying, or is it angled where it wont just go straight down a bit so water don't just run down into the tubes? Also out in the rain im wondering if rain will run down into it as well..

[@XMARGH]

In a highlifter because of the snorkel system this is never an issue, but in the regular models I tend to avoid spraying directly on the vents and I use the pressure washer on the angle. If you are really worried, you can remove the Plastic bed caps and then use a rag to cover both belt and air intake holes before cleaning.

[@MrHeadquarters]

@@XMARGH oh okay.. that grill just pops out? i didnt know if it was screwed into the fender

[@XMARGH]

Mr-Headquarters Screwed with a few fasteners, not a big deal honestly.

[@JoshuaLemire]

Watching That Sponge Fall LoL 13:30

[@XMARGH]

Josh's Entertainment Channel Good Catch! ;)

[@stimul81]

? when your cleaning your UTV with the water is there any particular electric spots i should be worried about. I just purchased a can-am mx3 r. I don't want to mess anything up.

[@XMARGH]

Brandon Waldrop Dont hold the pressure washer too close to electrical plug ins and spark plug boots. Aside from that make sure to cover the snorkels and that’s about it to be honest.

[@stimul81]

@@XMARGH Thank you sir.

[@OmarRodriguez-xu3lz]

DO I NEED TO DISCONECT THE BATTERY THANKS

[@XMARGH]

Omar Rodriguez No, I don’t see any reason to disconnect the battery.

[@NorthCountryBoyz]

I need to get a foamer for my pressure washer! Little extra product never hurt anyone. lol

[@XMARGH]

It is a big time saver when it comes to washing your ATV/UTV. Glad I made the purchase after I debated for a year lol.

[@NorthCountryBoyz]

That is kind of where I am at. lol. Do I really need it or can I go without...I hate spending money on anything outside of parts. haha

[@XMARGH]

@@NorthCountryBoyz For $20 you won't be disappointed, especially if you already have a pressure washer. You also don't need expensive soap, I found you can use generic high foaming/sudz soap from department stores.

[@NorthCountryBoyz]

Just ordered mine the other day. lol. Said F'It. lol. Now I just need to get my wheeler back...see how fast they get a new motor. lol

[@XMARGH]

North Country Boyz Right On! Let me know how it goes!

[@sandraholley2633]

Bio wash and SC1 is the best way to go

[@XMARGH]

Everyone has their go to products for sure! I'll be putting out a new video on ceramic products I use on the new RZR.