Step by step on How to Replace Timing Chain kit in Nissan Navara D40 / R51 (YD25 Engine)

[@حموددورين]

Zayıf yağ basıncı Navara dizel motorunun nedeni nedir lütfen cevapla

[@carlosguzman5856]

Muy bueno, gracias... 😃🤝👏👏

[@abcautotrendy]

cheers

[@premasirihewage5687]

❤❤❤❤❤

[@hermanfrans9169]

🙋‍♂️👉👍🤝

[@rgtercino]

at 0:09 a chain should be done every 100,000 km, at 24:42 it has done only 100k miles, what is the correct unit? km or miles?

[@abcautotrendy]

Sorry, it’s a miles to be replaced dear

[@adrianmckenzie1802]

Soon my father in law and I are going to replace my timing chain due to a rattle. This video was of great value. I wont be removing the whole engine or the front end but everything else around the front will be coming out. I really appreciate you help. Would you mind if needed i contact you via whatsapp?

[@abcautotrendy]

It’s my pleasure and sure you can ping me at anytime via WhatsApp

[@michaelmanuel5516]

Magkano ser labor kapag magpalit ng timing chain??

[@abcautotrendy]

It’s depends on the job, example here in Sri Lanka we charged nearly 75$

[@michaelmanuel5516]

@@abcautotrendy ah ok..tnx a lot!!

[@kaloyanpetrov3428]

Does the vacuum pump gear change when changing the chain?

[@abcautotrendy]

It's part of the complete replacement chain kit

[@kaloyanpetrov3428]

@@abcautotrendy Not included in the original chain replacement kit sold with the vacuum pump kit. Can you give me the product code of the wheel so I can purchase it. We are talking about the vacuum pump gear/sprocket

[@abcautotrendy]

@kaloyanpetrov3428 the gear sprocket comes along with the genuine timing chain kit, I also send you the code

[@rossdark713]

Would have been good to see you remove the timing chain cover and other ancillaries, but still good video.

[@abcautotrendy]

Thank you

[@victoramedome5016]

A B C , you are the number one Top class of education on Nissan Nevara Timing. My Thanks for education

[@abcautotrendy]

Thank you for the compliments.

[@zacwatson2090]

How did you lock the balance shafts with the sump still on??

[@abcautotrendy]

Hello Zac, I still did not get the question

[@tullysika]

Great informative video, what gasket cement do you use?

[@abcautotrendy]

Thank you.. We are using only Nissan Genuine gasket dear

[@ridausma5944]

pourquoi la chaîne distribution de Renault Maxity décalé à chaque fois

[@abcautotrendy]

well, that changes when the technology update, but do you find any difficulties?

[@vecco990]

to be honest, i like the music and the video too easy to understand

[@maskims_blanchos]

How do you tighten the camshaft sprocket?

[@abcautotrendy]

You need to hold the camshaft with 21in open spanner first then tighten the sprocket

[@СвоимиРуками-р6г]

Спасибо друг наконец-то хоть в одном видео нашёл как правильно эта ебечая планка ставится!

[@abcautotrendy]

Добро пожаловать, дорогая, мне очень приятно, когда люди учатся на наших видео

[@СвоимиРуками-р6г]

@@abcautotrendy спасибо

[@daniellesimpson2341]

So I don't need to remove engine like I've been informed

[@abcautotrendy]

Of course you do not need to remove the engine.. Only tappet cover, timing chain cover (top) and oil pump, in fact you have to take off radiator fan, fan clutch & crank pulley

[@rameshmaharjan9652]

Nice information Thank u

[@nishus112]

How often should we replace the timing chain? and the average cost to replace in Sri Lanka? (D40)

[@abcautotrendy]

Company recommended is to replace in every 100k KM, the genuine timing chain cost 95k as of today

[@ShSh98-c4d]

i like you video.

[@BenimanarafikiAugustin]

You are the one

[@samwelmaro8515]

Gooood engeneear

[@josedavidonquec8691]

amigo buenas soy de peru , tengo una nissan navara con ese motor , tienes el manual de reparación lo necesitó para reparar mi motor.

[@abcautotrendy]

please send me your email address and i can email the manual for you

[@masigunbo3721]

😄👍👍👍ok

[@baconbriefs]

💪 solid stuff. Super thanks

[@hugotapia5152]

Exelente gracias por compartir tus conocimientos

[@Davidjg23]

Some say its easier to remove the engine, i see you did this with remiving the front end. Is there anything to look out for when removing the front, anything to be aware of? Thanks.

[@abcautotrendy]

Apparently you need to remove even the radiator. It’s more convenient to remove all around prior to removing of the engine part

[@NkhumbeleniMakhuvhile-nn9yj]

Yes

[@Psilocybiant]

Piano trying to blow my 500 dollar ue hyperboom at 50% volume hahaha daym

[@davidthompson245]

Thanks again, very good details 👌. Helped immensely.

[@abcautotrendy]

Welcome dear

[@СергейЗапольский-б2т]

,👍🏼👍🏼👍🏼

[@ابووسامكاصدضايفوسام]

نسأل عن الحرار لماذ ترتفع وما السباب افيدونه يرحمكم الله

[@abcautotrendy]

well, there are multiple issues that causes to raise the heat up, please check most of my videos explain solution and root cause of the issues. in the meanwhile please check following. - radiator cap (radiator should have the flat radiator cap and reserver tank should have with the spring cap - use good coolant if your not using - please check the water pump - please check whether in your vehicle has thermostat valve or not حسنًا ، هناك العديد من المشكلات التي تؤدي إلى زيادة درجة الحرارة ، يرجى التحقق من معظم مقاطع الفيديو الخاصة بي تشرح الحل والسبب الأساسي للمشكلات. في غضون ذلك ، يرجى التحقق من التالي. - غطاء الرادياتير (يجب أن يكون للرادياتير غطاء مسطح للرادياتير ويجب أن يكون خزان الخزان مع غطاء الزنبرك - استخدم سائل تبريد جيد إذا لم تستخدمه - الرجاء فحص مضخة الماء - يرجى التحقق مما إذا كان في سيارتك صمام ترموستات أم لا

[@cesarnicolas4662]

Hola , me gusto el video mucho y muy bien explicado. Me gustaría saber como aflojaron y apretaron los tornillos de los dos piñones de los árboles de levas? Se ve que no quitaron la tapa de balancines pero no se ve como bloquean los árboles de levas o cual es su procedimiento . Gracias y un saludo desde España ¡

[@abcautotrendy]

Let me translate it to English and reply you

[@cesarnicolas4662]

Hello, I really liked your video. I would like to know how they blocked the camshafts to loosen and tighten them without removing the rocker cover. How to change the two sprockets without removing the motor cover

[@abcautotrendy]

Hi dear, thanks for the compliments. Well you won’t be able to remove/ tighten camshaft sprocket without removing the roccker cover

[@cesarnicolas4662]

In the video that they make the rocker cover, all the video is mounted on the engine, so many people think that the same could be done without removing the cover

[@abcautotrendy]

You can see the cam sprockets by removing only the timing chain cover but cannot remove them or tighten them without taking off the rocker cover

[@edwardphiri3454]

Thanks so much but mine has one hole on the top

[@abcautotrendy]

That's ok

[@skmecanique644]

thank you

[@Davo_1991]

Does the radiator have to come out or can it be done with just the fan and shrouding off? Asking because I've never done chains nor on this engine before and I work at a dealership and now I have to do one :'(

[@abcautotrendy]

Well it’s alway require to take off the radiator and shrouded coz you won’t be able to remove the water fan and crank pulley

[@Davo_1991]

@@abcautotrendy yeah thought as much. In regards to the fan, I had a quick look before I had to clock off but I'm assuming that can be taken out with the shroud or has to be done together, or did you find it easier taking out the whole radiator, fan and shroud together?

[@abcautotrendy]

It cannot take all in one go, first the shroud then only you can take off the fan clutch from the water fan

[@Davo_1991]

@@abcautotrendy oh ok thought so but the shroud doesn't fully surround the whole fan? So you don't have to take out fan and shroud together? If not that's good news but I was already expecting that awkwardness of having to take out fan and shroud together :S lol. Thanks for your help

[@abcautotrendy]

Welcome

[@djamelsamai8486]

عندي مشكل

[@abcautotrendy]

can i know whats the issue your facing dear?

[@dickydk01]

Maybe this step, same for navara Np300 (D23)..right?

[@abcautotrendy]

Yes that’s right

[@atiefosman8203]

This step also same on nissan frontier D22 YD25 sir??

[@abcautotrendy]

Yes sir, it’s the same YD25 engine

[@aneshsingh051]

np300 yd25 doesn't have a balance shaft

[@abisismael1343]

Thanks a lot

[@abcautotrendy]

Most welcome

[@RezaulKarim-hk4pm]

Good job

[@abcautotrendy]

Thanks

[@roshansenevirathna4851]

Super

[@abubakarseidu5333]

Boss l need to know Crank shaft and sprockets Lock position, before setting the chain

[@abcautotrendy]

Spin the crankshaft lock key position to upward, then lock the fuel pump, then loosen the cam sprocket before begin to remove the chains

[@inbagovender6287]

Thank you , i have navara yd25 4 x 2 does this engine take a balance shaft

[@abcautotrendy]

Yes of course it

[@inbagovender6287]

@@abcautotrendy Thank you , my one was stolen by the mechanic and Nissan South Africa does not pick up the balance shaft on their parts system for the 4 x 2

[@scientificcoveruphuangyanl5736]

Was this engine noisy or just a routine upgrade..

[@abcautotrendy]

It was rattling

[@luck758]

excelent congrats thankyou!!!!

[@abcautotrendy]

Our pleasure!

[@ЭдуардБогданов-к3о]

👍👋

[@Velikievvoen]

👏👏👏👏👏👍👍👍👍👍👍Super

[@abcautotrendy]

Thank you! Cheers!

[@Velikievvoen]

@@abcautotrendy you ' re welcome😉

[@eddyjean1745]

Good job

[@abcautotrendy]

Thanks

[@andyd5826]

Hi, do you know the torque specs for the crank pulley bolt? Thanks.

[@abcautotrendy]

Yes, let you know tomorrow morning

[@andyd5826]

@@abcautotrendy Thank you!

[@abcautotrendy]

We are following below settings Step 1. 75Nm Step 2. Loosen bolt Step 3. 75Nmu Step 4. Tighten 120°

[@andyd5826]

@@abcautotrendy Cheers mate👍 from 🇦🇺

[@abcautotrendy]

Cheers bro

[@joshuaakieh7021]

Thanks a million

[@abcautotrendy]

Your welcome dear

[@Dirtypepants]

Nice how did you tighten camshaft bolts with rocker cover on.

[@abcautotrendy]

Victor Given you need to lock the camshaft before attempting to tighten.

[@caseywakelin4068]

@@abcautotrendy he asked "how did you tighten the camshaft bolts without the rocker cover" of course you need to lock the cams, so how did you lock the cams without taking of the rocker cover?

[@grumpyldmn]

@@caseywakelin4068 Yeah was wondering about that, maybe they didn't replace them.

[@st_us]

They used an impact wrench, all mechanics do that.

[@abcautotrendy]

Make sure to use torque wrench

[@tomasztomasz8263]

Super. Poland

[@kintoxo4x4]

Без слов все подробно и понятно объяснили 👍

[@abcautotrendy]

thank you

[@akhilnnn]

Is that duplex?

[@abcautotrendy]

Nope dear it’s the simplex

[@jamesappleyard4529]

Mate how long did the job take

[@abcautotrendy]

Nearly 10-15 hrs

[@jamesappleyard4529]

ABC Auto Trendy thanks mate

[@HarwinderSingh-ky7cq]

I got vsk d40 and it makes crunchy noise when specially in the morning... Just wondering if that's timing belt or EGR? Thanks

[@abcautotrendy]

Harwinder Singh it could be a belt adjustment so please check that first