YD25 Timing Chain Install D40,D22,R51

Here is a step by step guide showing how to properly install the timing chains on a yd25 engine.
The parts installed
www.yd25.com.au...

[@kenm8797]

Motor engineering understanding at another level.You're a great teacher and thank you millions times.If you can please explain all other engine fixes the same way.👌👌👌

[@positivemasculinity42]

I have rebuilt motorcycle motor and gerboxs. After watching 2 minutes of this video, I decided to get a real mechanic to change the timming chain. Thank you for this video.

[@lorrainebwoy]

This is the most informative video on this topic. Thank you 🙏

[@kabuyeakram6302]

Thank you man You guy I think u a teacher the way you explain is professional

[@llstation4085]

Great video, very well explained,top job ,it will help hundreds of people, well done

[@tonykramer3534]

Howdy brother, you are the Best....how easy u make it look and how u explain it so dam well...i bought a good quality Nasser kit but still not confident to do myself...i wish u were here in Adelaide cos i would pay you to do mine....Thankyou

[@paulfinch1182]

Really helpful video saved me a lot of hassle 10/10

[@sham903]

more videos on YD25, please. Thank you so much

[@chrisdownes2974]

Does your kit provide different size shims for fuel pump sprocket?

[@kaloyanpetrov3428]

Could you please list when changing chains which sprockets (gear wheel) should I replace? Thank you!

[@yd2532]

Crank, vacuum pump, fuel pump sprockets need to be changed as they wear the most. Cam sprockets are already double row and do half the revolutions of the crank so they don't wear as much as the rest

[@the510wagon]

Great vid. Have watched a couple of times. Many thanks. I have a couple of questions: - What are your thoughts on doing this job with engine in vehicle? How much harder is it? - Another YT channel with a lot of YD25 experience reckons you should never turn the engine with a socket & bar on the crank. It can cause the chains to skip a tooth?? If this is true, what's the best way to rotate the engine when doing a routine inspection of the chains?

[@yd2532]

Can only jump a tooth when the chains are super worn out or sprockets missing teeth. If the parts are all brand new and the fail safe is in the tensioner it's won't be able to jump. We replace the chains in the car 9 hour job for a d40 and 15 for a d22

[@torbjrnhansen2967]

you have to go down with the bottom pan in d22 way to change the lower chain

[@bushratbeachbum]

​@@yd2532what about a pathfinder R51?

[@yd2532]

@@bushratbeachbum r51 is the same time as a D40 around 9 hours

[@bushratbeachbum]

@@yd2532 legend. Cheers mate. Ill set aside two days so I don't have to rush. Much appreciated. Ill look at ordering asap

[@VarshaKumar-b4t]

This video was very helpful thank you

[@BorneoLifeTV]

Hi from borneo.. thanks for your sharing.. nice job guys 👍👍👍

[@ishmaelmunzira3238]

Excellent explanation

[@Ozziegarage]

It might have been asked already but I’ve looked through the comments and I haven’t see anyone ask but at 1:55 in the video where you put lock tight on is that the only place I should be putting some? Cause I feel stressed thinking that all the other bolts and nuts should be fine without lock tight.. great video tho I’ll be using it as a guide very soon

[@yd2532]

Yea vacuum pump is the only thing that needs loctite

[@Ozziegarage]

@@yd2532 cheers thanks

[@mariosilviosilvio]

Your video is very good, keep it up good morning from Manaus Am Brasil

[@aznpride009]

Great tutorial mate. I followed your exact steps but afterwards when I rotate the crank by hand the timing marks on the chain never line up again with the dots on the gears. The dots on the gears always line up correctly though. Would this be okay?

[@yd2532]

Yes that's normal

[@yosefelhurti3366]

His experience ❤❤

[@docduck2427]

Geez man you make this look so easy. I currently have the good old chain slap from a broken tensioner. Whats a good brand kit to get to replace with?

[@yd2532]

If the chains are good you could just replace the tensionor, make sure it's genuine. Otherwise here is the Link to the timing chain kit fitted www.yd25.com.au/index.php/services/yd25-duplex-timing-chain-conversion-kit

[@henrywilliams4317]

Great tutorial gives me confidence to attempt this task myself. Do you have a tutorial on actually removing the engine from the vehicle ? Regards Henry

[@yd2532]

I dont but we usually take of the lower sump off before you pull the engine so you can leave the front diff in

[@henrywilliams4317]

@yd2532 thank you, I am going to give a try.

[@kaloyanpetrov3428]

Hello, why do you remove the lower chain single and then put on a double one with double sprockets, isn't it originally a single chainring with single sprockets?

[@yd2532]

Single row chain is prone to snapping so we upgrade to double row

[@patsparks738]

Great video mate

[@aaronford7838]

Wish I had of had this video when did mine years ago

[@MudGuardian]

Perfection 👌

[@kaloyanpetrov3428]

Hello, does the vacuum pump gear change when changing the chain? If the single row circuit is kept as it is originally.

[@shalnks]

Very good and informed video. Well done

[@AleksandEr71]

Доброй ночи!! Вы поставили натяжитель без железной прокладки. Подскажите пожалуйста еë обязательно ставить под натяжитель..???

[@troymckibbin528]

Once you have everything installed is it OK to see if the engine will start and run it briefly before putting the radiator back on?

[@yd2532]

Yes that's fine

[@timlaw219]

Excellent video man

[@МаксимИванов-в5с8н]

hello. tell me, why did you install this ring in the upper tensioner at 8:55? is this a spacer to increase the length of the pusher? is it included with the new chains and tensioners? What is its size?

[@yd2532]

@@МаксимИванов-в5с8н 7mm and it's a fail safe that takes up the air gap so that it can't go all the way back if it fails

[@sirjolly81]

I've just replaced front cover gasket on my 140kw 2.5. the plastic timing guide fell out as I removed the cover. It has one raised edge. Is that meant to be towards the engine or the timing cover. Yellow plastic piece.

[@yd2532]

www.tiktok.com/@yd25.com.au/video/7187004034899791105?_r=1&u_code=d8l049fa7dh37f&preview_pb=0&sharer_language=en&_d=d8l044aajmgd10&share_item_id=7187004034899791105&source=h5_m&timestamp=1700302195&user_id=6747806667557585926&sec_user_id=MS4wLjABAAAAXXad7RKkwD5fjZuucsAkTDblrfBl_MEX8TTuSJRE_f1nXZzFMcHHd5rxSjIR8QXL&social_share_type=0&share_iid=7302168086265661185&share_link_id=c7ac05ff-ed27-4b10-b347-e67fd30a3bda&share_app_id=1233&ugbiz_name=MAIN&ug_btm=b8727%2Cb2878

[@theLemonsForLife]

Thanks for the helpful video!

[@benrogers5393]

Hey mate, I’ve got a YD25 with 112k on the clock and wondering if this is something I need to be looking at a certain amount of Kms on the odo? Or is it just something for when you’re looking to put more power in, ie bigger turbo, more boost?

[@yd2532]

@@benrogers5393 ye average life for the fuel pump chain is around 150k

[@wayneclements7202]

fantastic detailed video, thankyou.

[@dzikidzik1752]

In a moment I will be replacing the timing chain, please tell me which manufacturers do you recommend? what brands?

[@yd2532]

Yd25.com.au has the best double row and single row kits

[@dzikidzik1752]

@@yd2532 Unfortunately for my country this site is blocked I don't understand why, I'm from Poland, how else can I buy a chain from this company? because I understand that Yd25 is a direct chain manufacturer? please forgive me but I haven't owned this car for a long time and I want the best for it hence my inquisitiveness.

[@dzikidzik1752]

@@yd2532 Maybe you know equally good producers who will be available in Poland?

[@yd2532]

@@dzikidzik1752 they can send parts internationally just fill out the contact page. Otherwise if you get a kit locally just get a genuine one

[@dzikidzik1752]

@@yd2532 Thanks a lot for your help master 💪🍺

[@TomGrande-kc6zd]

When u removing the tension cylinder you are putting in a failsafe. Where can I buy that one? Or did u make it? What’s the measurement if i need to make it my own? 😇

[@yd2532]

7mm long. Can cut your old tensioner plunger

[@GenaEnSamIAm]

Awesome videos!! Thank you!

[@Batman-gi3ty]

Здравствуйте. Подскпжите в шатунах в длине YD25 174 л. С и 190 л. С есть отличия?

[@lesilestivany7839]

G,day can the YD 25 engine be made more 🤔 heavy duty???

[@robhowett7733]

Hi, I'm replacing my top chain on my yd22 170,000 mile xtrail, I noticed you didn't change the cam gears, is there any reason for that and would you recommend I do or should I replace them all or will they be ok. Tnx in advance.

[@yd2532]

Cam sprockets are double row from factory and do half the revolutions of the crank so they last the longest out of all the sprockets. If you do replace them make sure you hold the cam by the first lobe with a big shifting spanner with good flats on it. Don't hold it by the hex in the centre of the can cause you will either round it off or it will start to twist the cam from the torque 144nm

[@dsk-xx]

i have a 2.2 diesel engine. Its done 1,20,000 miles . Regular maintained. Early interval 5w30 oil changes. How much should I expect timing chain to last more? What would be significant symptoms of timing needing a change? Although on the other end of cams , vacuum pump chain sprocket had slacked at 1,00,000 miles . I did a work around and gave the needed tension to the tensioner guide. I noticed the teeth on pump sprocket one thin , but its working just ok since then. Please guide me about timing, how long do they last on good maintained.

[@DIFFLOCKERS]

None of my chain lines match up and there's only 1 yellow indicator per chain. Can I just line it up with fuel pump and check cylinder #1 is at TDC then mark the cams?

[@yd2532]

When you pull the car apart the colour links won't line up. Mine does because I put the chains on for the video. So just put crank to 12 o'clock and pin in fuel pump and your good to pull apart

[@TheDivineImpulse]

No cam shaft sprockets? 😮

[@sirus3505]

Can i turn this engine over by hand just to check if piston to valve clearance are good?

[@yd2532]

If you don't have the fail safe in the tensinor or the chains are really worn it may jump teeth.

[@Davo_1991]

Torque to 60nm with rattle gun lmfao yeah right bud... Also its best practise to have dot on counterweight/balance shaft gear that lines up that tooth in between the two dots on the crank gear. Not 100% necessary but best to do and cyl 1 should then be on compression tdc. And the cam gear dots should align with the dots on the timing case.

[@yd2532]

Before removing the old bottom chain and sprockets you can replace the vac pump sprocket with the new one then lock the fuel pump and torque it but the worn chain jumps sprocket teeth.

[@bluenaite]

Hey guys, do you guys do the conversion kits for the yd25 VSK (2010)? I sent an enquiry through your website but not sure if it went through.

[@yd2532]

Ye here is the link www.yd25.com.au/index.php/services/140kw-duplex-timing-chain-conversion-kit

[@bluenaite]

@@yd2532 Cheers. I have to do the timing chains so I figure I should do the conversion while I'm in there. To confirm, you need to know which Vac pump mine has and do I just email through the website to order?

[@yd2532]

@@bluenaite Ye find out which vac pump is on it and email or call to order

[@jessetink3753]

Hey champ is there a way to tell if it’s your timing chain or injector rattle?

[@andydiep3632]

Hi mate, Does this kit go on the early model (euro 3)? Is the fuel pump shins included? And what rtv you recommend using? Thanks.

[@yd2532]

Yes will fit euro 3 2005-6. We started making shims locally because they were hard to get from Nissan $25 for the 2 shims

[@yd2532]

3 bond supersealer grey silicon is what we use

[@andydiep3632]

@@yd2532Does it include timing chain cover gasket and aprox how much to do the entire job? Thanks

[@yd2532]

@@andydiep3632 doesn't come with the cam chain cover gasket usually they are fine to reuses just silicon them in the corners. We charge $2500 for a standard D40 parts and labour

[@andydiep3632]

@@yd2532 I am looking to do the Job my self so how much is just the kit it self? And anything to look out for when doing so?

[@threemglobal]

Good job

[@dsk-xx]

Isn't that a yd 2.2 diesel

[@coadyg]

Great video

[@romankravchuk2720]

Hi there. Where I am able to find fail safer for upper tensioner? Does it go with genuine Nissan Timing chain kit?

[@romankravchuk2720]

My car is Navara D22 , 2010

[@yd2532]

@@romankravchuk2720 it's something we have made. You could cut a bit off you old tensinor plunger to use as a fail safe

[@romankravchuk2720]

@@yd2532 What is the price for the timing chain kit (not duplex) Navara D22? I have bought oil pump from you before.

[@yd2532]

@@romankravchuk2720 genuine single row with a billet vacuum pump sprocket is $950

[@rawel30]

What is the correct compression pressure of the Nissan Navara 2.5?

[@yd2532]

Around 400psi

[@velinr]

What is this "fail safe" for the top tensioner?

[@yd2532]

Genuine tensinors are the best but the top ones are prone to failing (rattling on startup till the oil pressure light goes out) The fail safe takes up the air gap in the tensinor so if it does fail it doesnt have enough slack to jump teeth.

[@TheMrthiagox]

@@yd2532 measures of fail safe can you tell us?

[@yd2532]

@@TheMrthiagox around 7mm it's designed so the spring fit inside it so it doesn't add any tension it just takes up the air gap

[@TheMrthiagox]

@@yd2532 but this fail safe will not make noise?

[@yd2532]

@@TheMrthiagox doesn't add any noise by using the fail safe

[@omaliveatlast4688]

Do camchain adjusters work by oil pressure ?

[@yd2532]

Ye they are hydraulic tensinors usually when the top tensinor starts to go bad it will rattle untill the oil pressure light goes out

[@magpiesfc10]

Where can you buy the locking pins from please

[@yd2532]

we make it for the balance shaft pin. The fuel pump pin is just a screwdriver bit

[@probuildconstruction]

Legend

[@nOWaYOUT221]

Is na new navara d23 yd25 have double row timing chain

[@yd2532]

The still use single row

[@mattsfat73]

Hi mate, why did the fuel pump shim size change at all ?

[@yd2532]

From factory Nissan has the wrong shim on them most of the time because they cant easily check alignment because the vac pump sprocket has 2 floating rings around the teeth. That's why the chain life varies so much because of the factory alignment

[@mattsfat73]

Thanks for the fast reply :) where do you get the shims from ?

[@yd2532]

@@mattsfat73 we had some made or nissan

[@magpiesfc10]

Timing covers torque specs please

[@rangerj4080]

Is there a solution for the 140kw yd yet?

[@yd2532]

Ye here is the kit for 140kw models www.yd25.com.au/index.php/services/140kw-duplex-timing-chain-conversion-kit

[@magpiesfc10]

How many o’rings are there for the timing cover to block is it just the brown one

[@yd2532]

4 red ones 2 small 2 big. From block to rear timing cover

[@yd2532]

Watch this vid kzbin.info/www/bejne/jHPFmH53nLGqfKc

[@magpiesfc10]

Thanks YD25. Where do I get the fuel pump shims as they don’t come with the kit

[@yd2532]

@@magpiesfc10 we sell them or nissan

[@magpiesfc10]

Do you have the part numbers for the different sized shims please

[@lepequie]

I can not see link to purchase parts does not work

[@yd2532]

Link might only work for Australia. Where are you located?

[@conmanumber1]

Is this the 2012 Spanish built Nissan Navara D40 St-X Diesel?.

[@yd2532]

this is a 2008 euro 4 engine. Still similar process depending on the kit you buy

[@conmanumber1]

​@@yd2532Thanks. What's a good reliable duplex chain kit worth buying?. At what stage would one knows when to change?. Mine is 165.000 K.m on clock but it's not idling then when attempting to accelerate it farts n missis then dies. It smokes a really white Hazy putrid smoke but no oil in coolant nor coolant in sump. It struggle to start. S.c.v, e.g.r cooler replaced (but not needed, injectors tested fine. E.g.r valve actuator works fine. Any idea what may cause this grief?... Crank n cam sensors?. Thanks again in advance..Carl

[@yd2532]

@@conmanumber1 could be your scv make sure you get a genuine one. here is achain kit to suit. yd25.com.au/index.php/services/140kw-duplex-timing-chain-conversion-kit

[@conmanumber1]

​@@yd2532Is this simular to the West Yorkshire Engines independent Nissan Navara service guys duplex kit he invented?. I was about to order from him but noticed yours.

[@yd2532]

@@conmanumber1 it's our own kit uses genuine Nissan double row chains.

[@แมวดําออนทัวร์]

สุดยอดครับ

[@negueba235689]

Do all the pump shins follow in a kit ??

[@yd2532]

The shim kit is an optional extra

[@negueba235689]

@@yd2532 Where do you recomand to order from ? :)

[@yd2532]

@@negueba235689 if you in Australia you can order from our online shop otherwise fill out the contact us section on the website yd25.com.au

[@JeyssJeyss]

Hello.. Its been a year sinve my xtrail is resting..mechanics unable to set timing..each time it slips 3 ..

[@ToromRodney]

Why is my Nissan Urvan 350 turbo diesel engine bus having a shooting oil out of my dipstick

[@yd2532]

check for blowby from the breather hose on the tappet cover

[@glenwoolnough1499]

Where do i get those special tools?

[@yd2532]

We make them you can hire them when you use our kit

[@romankravchuk2720]

nice video

[@SylvainKloutse]

Comment remplacer le pompe de naissan x -trail moteur 2005

[@enverdunya]

selamlar çok güzel anlatmışsın harika

[@o_desconhecido1]

Top top demais

[@MrNotStock]

Sick

[@madjidmadjid3539]

thanks you

[@ПавелШишкин-ф4л]

Спасибо огромное

[@juanlabrador8427]

Lo quiero en esañil

[@ThomasPhiri-n2u]

Remove. A pump yd25de

[@AshrafJutt-z5j]

Nissan diesel

[@tafnaka]

Great tutorial . Keep up the good work .

[@jasonPMR2]

Does the fuel pump bolt try to rotate when you do the bolt up to 90nm? If so how do you stop it turning?

[@yd2532]

@@jasonPMR2 lock it with the pin

[@kaloyanpetrov3428]

Does the oil pump need to be replaced when i replace the engine chain?

[@yd2532]

Doesn't have to just check it for wear

[@MrSbu79]

Must there be a gasket under the top chain tensioner?

[@yd2532]

With the latest design top tensioner from Nissan don't use the gasket

[@MrSbu79]

@@yd2532 Great teacher, thank you!