Step by Step Upgrade to Galfer Wavy Brake Discs on KTM Duke 790

  Рет қаралды 8,395

The Bolt Hole Biker

The Bolt Hole Biker

Күн бұрын

Пікірлер: 98
@lynnkanable7023
@lynnkanable7023 2 жыл бұрын
Great video, no BS, just straightforward info
@TheBoltHoleBiker
@TheBoltHoleBiker 2 жыл бұрын
Cheers and thanks for watching👍
@Think_Bike
@Think_Bike Жыл бұрын
Top man Mr Bolt ...Extremely informative videos and easy to follow is the key!😊
@goslinky
@goslinky 3 жыл бұрын
Im enjoying every minute of your channel! love how deeply technical you go into your subjects. subbed! hoping to get my 790 soon.
@TheBoltHoleBiker
@TheBoltHoleBiker 3 жыл бұрын
That's great, thanks for watching! You're going to love your 790!
@LeeB132
@LeeB132 Жыл бұрын
Hi Bolt hole biker, just wanted to say just discovered ya channel and really enjoying it, i have a triumph trident 660 at the moment but fancy a ktm 790 duke next so your vids have been a brilliant in-site and convinced me even more to get one. Great channel,Best regards Lee
@CampbellZeroOne
@CampbellZeroOne 3 жыл бұрын
Great timing! My discs are pulsing terribly now so it looks as though I'll be doing the very same thing in the very near future. Thanks for the vid 👍🏼
@TheBoltHoleBiker
@TheBoltHoleBiker 3 жыл бұрын
No worries! Pulsing brakes are annoying as f@*k!
@CampbellZeroOne
@CampbellZeroOne 3 жыл бұрын
@@TheBoltHoleBiker Was barely noticeable to start with, worsened within another 1k. Not the most confidence inspiring whether cruising up to junctions in town or trail braking into a corner 😯
@timhowarth7720
@timhowarth7720 3 жыл бұрын
Speak with your dealer, had the same problem replaced them f.o.c as pulsing is a common known fault
@CampbellZeroOne
@CampbellZeroOne 3 жыл бұрын
@@timhowarth7720 Funny you should say that... Both me and the dealer have tried KTM with no luck. Outside of warranty and lockdown not taken into consideration. I wrote a customer complaint yesterday to argue my corner, so we'll see what happens after that. Otherwise, there's going to be a VERY moany video uploaded soon!
@timhowarth7720
@timhowarth7720 3 жыл бұрын
@@CampbellZeroOne I’m surprised it was never a recall issue by KTM from the amount of people who have had the problem, wavy discs seems an expensive way of curing it as there is no benefit other than cosmetic
@MALVSMACHINE
@MALVSMACHINE 3 жыл бұрын
You’ve got me looking at discs for my Panigale now 😆. Congrats on the 1000; Party time 🎉🍻
@TheBoltHoleBiker
@TheBoltHoleBiker 3 жыл бұрын
I didn't know you had a Panigale, I bet that's a sweet ride! How comes you only ever show the husky in your vids? Cheers for the congrats, the party starts now!!!
@MALVSMACHINE
@MALVSMACHINE 3 жыл бұрын
@@TheBoltHoleBiker it’s great, it’s a 2014 899 that I bought new and I love it. I’ve got an ‘09 R6 as well but because of work commitments over the last few years, I just couldn’t do anything with them so they were put SORN. The Husky and the channel is a way for me to try and remember how to have fun again, and in the Christmas holidays I MOTd both road bikes ready for post lockdown so will be back in to the vids soon. I done a Christmas vid on the Ducati after making it road legal again but didn’t put the right thumbnail up😆. Excellent, if I wasn’t in work I’d have a beer for you.... suppose I can wait for the weekend 😄🍻
@TheBoltHoleBiker
@TheBoltHoleBiker 3 жыл бұрын
@@MALVSMACHINE I look forward to seeing those! You're a better man than me if you can wait from a Monday to the weekend for a beer!😂😂😂
@bazza8947
@bazza8947 3 жыл бұрын
I added these at the same time I swapped the pads to Brembo 07BB1990 and quite happy with the brake performance now. I have a set of the HH pads here I might try at some point. I've been thinking of a Brembo 19RCS master cylinder but doubt I will.
@TheBoltHoleBiker
@TheBoltHoleBiker 3 жыл бұрын
Yes, I was considering a Brembo master cylinder, but I don't think I will either, I'm quite happy with the brake performance as it is now.
@davem3008
@davem3008 3 жыл бұрын
Great vid. Good to know its a worthwhile mod. I'm still on the originals on mine, but always thought the initial bite was lacking a bit 👍
@bazza8947
@bazza8947 3 жыл бұрын
@@davem3008 Start with changing the pads as it's the most bang for buck change you can do.
@johnhasell5692
@johnhasell5692 3 жыл бұрын
Well done Stephen on your 1k subscribers.
@TheBoltHoleBiker
@TheBoltHoleBiker 3 жыл бұрын
Cheers John!
@volt7cooltangs701
@volt7cooltangs701 3 жыл бұрын
Wavy’s look great on your 790. I’m going to get mine done. Thanks for a great vid. Subbed
@TheBoltHoleBiker
@TheBoltHoleBiker 3 жыл бұрын
Wow, you've had a binge watch! Welcome on board! I love the wavy's.
@TheGorillaBiker
@TheGorillaBiker 3 жыл бұрын
Massive congrats on the 1k subs man, bloody nice feeling to hit it eh :) Haha they look excellent, I love how some people give out to us for the fancy bits but they looks so niiiice :D I was looking at something like this for the GSXR, very interesting to hear the feel is better! Nice one man!! I'm actually in love with your garage set up!!
@TheBoltHoleBiker
@TheBoltHoleBiker 3 жыл бұрын
Cheers fella, yes, feels good! Don't even know why, as it is just a number, but it is THE number!!! I'm glad you like the garage, I would be lying if I said I didn't love it as well. Behind the camera, in the rest of the garage it is not quite so shiny!!!🤣🤣🤣
@TheBoltHoleBiker
@TheBoltHoleBiker 3 жыл бұрын
By the way did you notice your stickers on the side of the toolbox and on one of the lower doors? Love them!
@TheGorillaBiker
@TheGorillaBiker 3 жыл бұрын
@@TheBoltHoleBiker I did notice them, meant to say it but well, you know how my brain works, retains information about as well as a bucket chopped in half holds water. Exactly, it's THE number that youtube sort of recognises your efforts in a way :) It's class man, haha ah we all must have our messy spaces too :D
@DukeOfTwist
@DukeOfTwist 3 жыл бұрын
Congratulations cracking the 1k mark onwards and upwards 👍
@TheBoltHoleBiker
@TheBoltHoleBiker 3 жыл бұрын
Woohoo! Cheers for your help as well!
@DukeOfTwist
@DukeOfTwist 3 жыл бұрын
@@TheBoltHoleBiker Your welcome, I enjoyed the process.
@patrickj5256
@patrickj5256 3 жыл бұрын
The wavy discs were fitted on my bike when I got it but i think maybe the original pads were left on. so when these need replacing I should go for the sintered ones? Anyway happy braking. as I get older I have found good brakes means happy riding! Pat
@TheBoltHoleBiker
@TheBoltHoleBiker 3 жыл бұрын
Agree 100%. And, yes, I'd put the EBC HH sintered pads on when you need to replace the pads👍. They are decent.
@kenibutcher6719
@kenibutcher6719 3 жыл бұрын
Huge congrats on breaking 1k subscribers. And loving the look o the bike👍watching your videos always gives me the thought of getting a bike licence...🤔
@TheBoltHoleBiker
@TheBoltHoleBiker 3 жыл бұрын
Cheers Keni! You should definitely get your bike licence, you’d love it!
@kenibutcher6719
@kenibutcher6719 3 жыл бұрын
@@TheBoltHoleBiker I think I definitely will, if not this year then next year for sure👍
@TheBoltHoleBiker
@TheBoltHoleBiker 3 жыл бұрын
@@kenibutcher6719 Boom! I’ll come for some ride outs with you! You’re going to love it!
@kenibutcher6719
@kenibutcher6719 3 жыл бұрын
@@TheBoltHoleBiker looking forward to it💪
@monchgupit
@monchgupit 3 жыл бұрын
hi... how many kms in when you felt the rotors warp? thanks for the install walk thru. didn't know about fork dive before tightening
@TheBoltHoleBiker
@TheBoltHoleBiker 3 жыл бұрын
👍 mine started warping very slightly at around 11-12,000 if I remember correctly. I changed them before they got very bad.
@alanferreira7856
@alanferreira7856 2 жыл бұрын
Hi Mr bolt hole biker Great channel by the way 💪🏼 Could I ask your advice on the ride height setting on the rear spring I'm 6.3ft weight 85kg I'd like to make the bike slightly taller but not have the preload to hard,any advice would sincerely be appreciated
@DukeOfTwist
@DukeOfTwist 3 жыл бұрын
M8 almost single digits great new vid - Shared everywhere 4u ;-)
@EchoMotoFeatures
@EchoMotoFeatures 3 жыл бұрын
This friend of yours is really good 💯
@DukeOfTwist
@DukeOfTwist 3 жыл бұрын
@@EchoMotoFeatures Yes he produces a lot better videos than I do lol
@EchoMotoFeatures
@EchoMotoFeatures 3 жыл бұрын
Well we all need improvement until we reach how the pros do 💯 keep it up
@DukeOfTwist
@DukeOfTwist 3 жыл бұрын
@@EchoMotoFeatures I will but try ;-)
@TheBoltHoleBiker
@TheBoltHoleBiker 3 жыл бұрын
You da man!!!
@EchoMotoFeatures
@EchoMotoFeatures 3 жыл бұрын
Nice! Considering to change mine too. Do you happen to have a link where you bought it if it's online?
@TheBoltHoleBiker
@TheBoltHoleBiker 3 жыл бұрын
Hi, I got mine from here: ktmtwins.com/products/ktm-790-duke-galfer-wave-brake-disc-2018-2019
@Ktmsmcr690r
@Ktmsmcr690r Жыл бұрын
Witch type of locktide did you use for the bolts
@michaelmclarney1994
@michaelmclarney1994 3 жыл бұрын
Great upload, thanks. I'm thinking of adding these discs to my fj1200 if possible. I'm still considering a 790 or speed triple to replace my other 2 bikes next year, just can't decide....
@fantastic1965
@fantastic1965 3 жыл бұрын
Speed triple is a fast and excellent ped but it's nearly twice the price of the 790. The Duke is not only a super bargain, it's bags of fun, excellent handling and fully loaded. £7500 new.
@michaelmclarney1994
@michaelmclarney1994 3 жыл бұрын
@@fantastic1965 I'm thinking used triple as I can't afford new. I have ridden a triple and loved it but the lightness of the 790 and the potential to have a new bike is tempting.
@DukeOfTwist
@DukeOfTwist 3 жыл бұрын
My brother has the speed triple and I have a 790 there is vids on my channel of us riding together
@michaelmclarney1994
@michaelmclarney1994 3 жыл бұрын
@@DukeOfTwist thanks, I'll have a look.
@DukeOfTwist
@DukeOfTwist 3 жыл бұрын
@@michaelmclarney1994 45min 300+ corners is uploading currently - should be viewable in a couple hours.
@kaliashassan
@kaliashassan 2 жыл бұрын
Are these same diameter as the standard disc.
@alexalex9971
@alexalex9971 3 жыл бұрын
Thanks bro. Did you ever think to change callipers to brembo stylema?
@TheBoltHoleBiker
@TheBoltHoleBiker 3 жыл бұрын
I have considered that, but wanted to try brake improvements bit at a time to see how far I needed to go to get them performing right. So I started with the pads, which did make a difference, but not enough on their own, now I have changed the discs to be honest I think I'm okay with the performance now. If I hadn't been then I probably would have considered bleeding them first, just top make sure it wasn't just a set up issue, then braided lines, calipers and master cylinder in that order. All starts adding up fairly quickly though!
@fantastic1965
@fantastic1965 3 жыл бұрын
If we ever meet, it's probable we'll never see our wives again! Great looking discs
@TheBoltHoleBiker
@TheBoltHoleBiker 3 жыл бұрын
Excellent, where do I sign?!!!🤣🤣🤣
@fantastic1965
@fantastic1965 3 жыл бұрын
@@TheBoltHoleBiker I'll be in touch 😉
@CjsGfX
@CjsGfX 2 жыл бұрын
what is the belly panel you have?
@TheBoltHoleBiker
@TheBoltHoleBiker 2 жыл бұрын
Hi, it is the OEM 'front spoiler' I think they call it.
@MacMillanDAN
@MacMillanDAN 3 жыл бұрын
What brand are your torque wrenches and torx nuts?
@TheBoltHoleBiker
@TheBoltHoleBiker 3 жыл бұрын
Hi, the smaller torque wrench, the red one, is a Teng Tools one, the bigger one and the Torx sockets are all Halfords Professional range - lifetime guarantee!
@andreasbrander9819
@andreasbrander9819 3 жыл бұрын
Arent the pinchbolts suppose to be 15nm?😅😊
@TheBoltHoleBiker
@TheBoltHoleBiker 3 жыл бұрын
Hi, yes, I have just checked and they are 15nm, did I say something different in the vid? If so I'll get it amended, cheers for the head's up.👍
@andreasbrander9819
@andreasbrander9819 3 жыл бұрын
The Bolt Hole Biker 10nm in the vid😊 great video tho👍very useful to me because today was ”change warped disc day”😅
@TheBoltHoleBiker
@TheBoltHoleBiker 3 жыл бұрын
@@andreasbrander9819 Cheers, and thanks for keeping me right, I checked the vid after your comment and I did indeed say 10nm, don't know how that happened! Doh! I'll have to look into how to edit a live video - not tried that before! Good luck with the disc change, it'll be pure pleasure braking once it is done...👍
@1Moggi
@1Moggi 3 жыл бұрын
Certainly not a cheap upgrade though! Aren't they £500+ for all 3?
@TheBoltHoleBiker
@TheBoltHoleBiker 3 жыл бұрын
Yes, it was about that, a bit salty! To be honest, if the original discs weren't warping I probably wouldn't have gone to expense at this stage. I have to say though, now that they are on it was worth it!
@1Moggi
@1Moggi 3 жыл бұрын
@@TheBoltHoleBiker certainly sounds like it! 👍
@1Moggi
@1Moggi 2 жыл бұрын
Looks like I'll be having to head down this route myself, now! 🤦🏻‍♂️
@polopauletta9984
@polopauletta9984 3 жыл бұрын
put brembo pr 19 , and brembo M50
@TheBoltHoleBiker
@TheBoltHoleBiker 3 жыл бұрын
Do the M50's fit directly onto a 790?
@polopauletta9984
@polopauletta9984 3 жыл бұрын
@@TheBoltHoleBiker yes perfect
@edy0787
@edy0787 3 жыл бұрын
Loctite?
@TheBoltHoleBiker
@TheBoltHoleBiker 3 жыл бұрын
Well, Loctitey type stuff(ish)...😊
@davapod
@davapod 2 жыл бұрын
My experience with wave disc's is not good. Nobody uses them on track or off these days. Waste of money.
How Too Fix Brake Judder For Free!! | Three Tricks To Try 🔧
19:14
Lamb Chop Rides
Рет қаралды 77 М.
When mom gets home, but you're in rollerblades.
00:40
Daniel LaBelle
Рет қаралды 132 МЛН
Human vs Jet Engine
00:19
MrBeast
Рет қаралды 188 МЛН
MAGIC TIME ​⁠@Whoispelagheya
00:28
MasomkaMagic
Рет қаралды 38 МЛН
Não sabe esconder Comida
00:20
DUDU e CAROL
Рет қаралды 66 МЛН
How To Repair Coolant Leak on KTM Duke 790
11:53
The Bolt Hole Biker
Рет қаралды 13 М.
Galfer Wave Disc Upgrade for the KTM 390 125  200 250 Duke
20:53
Moto Mirius
Рет қаралды 23 М.
How to Change a Motorcycle Tire BY YOURSELF! (Easiest Method)
26:58
6 Verbal Tricks To Make An Aggressive Person Sorry
11:45
Charisma on Command
Рет қаралды 24 МЛН
Why I like my Duke 790
16:18
Surviving The Fray
Рет қаралды 1 М.
[How To] Change Your Front Brake Pads (Monoblock Caliper)
22:44
How To Moto
Рет қаралды 95 М.
How to replace a rear brake pads on a duke 790!
5:08
It's Jet Biaco
Рет қаралды 3,6 М.
When mom gets home, but you're in rollerblades.
00:40
Daniel LaBelle
Рет қаралды 132 МЛН