Sterling Axis With Asymmetrical Neck

#knowyourgear
Some of the links below are affiliate links and when you use them your purchase helps support the channel.
Sterling Axis guitars
reverb.grsm.io...
D Addario Lubrikit
imp.i114863.ne...
Herco Picks? ( The picks I use)
amzn.to/3e3NhH5
EVH 5150 LBX
imp.i114863.ne...
Fender 65 Deluxe Reverb
imp.i114863.ne...
Keeley Caverns Reverb Delay pedal
imp.i114863.ne...
Friedman Dirty Shirley
imp.i114863.ne...
Klotz 15ft Cable with breaker ( You will never go back)
amzn.to/2YilLQS
String joy strings
www.stringjoy.com
Dimarzio Locking strap
imp.i114863.ne...
Snark tuner
imp.i114863.ne...
Podcast
knowyourgear.b...
Facebook
/ knowyourgear
Instagram
/ phillip_mcknight
Know Your Gear T shirts
teespring.com/...
You can become a Patreon and support more videos like this
www.patreon.co...
Send photos of you in your shirt here or ask questions
[e-mail].

[@ghalsor]

Sterling has been bringing the fire in 2021. As a hobby player, there is a ridiculous amount of great $400-$800 guitars right now.

[@cliftongardner4367]

Man, it just continues to impress me what the “low end” of the market is putting out these days. I would happily sling one of these at a gig, looks like a million bucks.

[@docevans5971]

I have many guitars (EBMM EVH, Stingray guitar and bass. Sterling's silhouette, Axis, Stingray 5 string ). Sterling's from Indonesia, amazing quality. One of my favorite guitars without mods, (and I do lots of mods) is a Squire Stratocaster Affinity I purchased for $112.00 bucks due to the the trem-arm was missing. It has a dark sunburst body, blacked out hardware, a 59 sounding humbucker that has a tone I do not want to change. Indonesia is catching Mexico in value.

[@palidiciovermingagurainia1760]

Seems the last 3 years have been a catch up to quality for low end guitars like we’ve never seen

[@mynameisvisutinnadda]

The indonesian factories have been really impressive these past few years

[@jackflowers2944]

That's a fairly nice guitar at that price point. The flame maple in yellow looks great too.

[@ericcarpenter3263]

The neck that MM and Peavey put on EVH guitars is simply the best neck I’ve ever put my hands on. They are perfect for my hands. I wish I could spec that neck with other companies. It’s amazing.

[@joshuafreedman7703]

...Warmoth...

[@AggaCityGang]

I'm so glad to see you just lubricating the nut instead of complaining about the guitar not staying in tune and not trying to do anything about it like most pessimistic reviewers/cry-babies, who clearly have no knowledge about how a guitar works. Great review! I'm tempted to pick one up inspired by the guitars Jerry Cantrell got from Eddie

[@Electricpraise777]

Just got mine last week, and I love it. Sounds real chunky and plays flawlessly. The trem's a little stiff, I'll probably throw some locking tuners on it, but I honestly couldn't ask for a better guitar at that price point

[@michaeleaster1815]

what does the asymmetric neck feel like, for you? that's the big Q !!!

[@Electricpraise777]

@@michaeleaster1815 At first I wasn't feeling crazy about it, but after a while now I really dig it. It gives me a good grip for the chords, and feels easy to play leads on the high strings. It's a great feature imo

[@randyhusar4364]

So glad you reviewed this guitar. Been apprehensive due to the low price. Questions answered!! Thanks Phil!!

[@ernieflanaganstingraybassm1463]

Great review and all sterling subs/Axis are set up in California and live up to the hype of Musicman/Sterling USA !! SO yes all guitars, come set up by the same people, that set up all USA models !!! Enjoy Phillip, they are my favorite overseas made guitar.....And your my favorite DEMO man, cause you tell it like it is and i have been watching your channel for a very long time and you are just a very nice person, and we need more people like you in this crazy world my friend.....T.Y for bringing sunshine in my life everyday......

[@MusicTherapyLaz]

Man... you just gave me some serious GAS bro! Love you man! ❤️😎🤘🎸😉

[@tacob69]

Man the time of buying affordable guitars is upon us.Sterling Music man is stepping up their game.This one $400 the other one they sell at $500 with a roasted maple neck and everyone thats reviewing them says Q.C is great.

[@lokibane4939]

Gotta be careful. Everyone online who is reviewing them has been paid to. Not saying Phil isn't being honest, just that he's getting a sponsored deal with them because you can buy the guitar through his link. Not necessarily the best guitars on the market. I'm sure they're good, but play them yourself first.

[@aniquinstark4347]

@@lokibane4939 I mean doesn't the visual and audio tell you it's a fair enough review? He wasn't overly positive or negative, didn't rave about it and criticized stuff he didn't like. Obviously, many reviewers online are less than objective but I tend to trust Phil almost implicitly at this point because his reviews are very consistent in their methodology. Edit: I just wanna add that based on my viewing, I wouldn't buy it because of the tuning issues but I know that because of his review.

[@lokibane4939]

@@aniquinstark4347 Eh, not to me personally. It's really easy to make guitars look good, or send the top of the bunch to the reviewer. And as for the audio side of things, that's actually one of the last things I think about with regards to reviews of stuff like this. Audio is super, super finicky and can sound wildly different even if he uses the same amp or plugin that you yourself own. Mics versus in the room sound are incredibly unique. That does make it hard to buy guitars ever, since even trying them out at guitar stores doesn't give you a perfect inclination of their tone. Even so, it's something worth considering. What this comes down to is build quality, and he's both being paid by them, and was no doubt sent the best one they could make. I'm not saying they're bad guitars. All I'm saying is I wish he was a little more upfront than vaguely stating that the link to it may or may not be an affiliate link, which is really hazy imo. I get why he does it, but don't take this review as the word of god.

[@mikedr1549]

It's the golden age of affordable guitars! With computerized manufacturing technology and global competition it's such a great time for guitar players. When I started in the 80's cheap guitars were really *cheap* guitars.

[@evankeal]

@@lokibane4939 I have, sterling by music man of any price dwarfs any other foreign made guitars in quality. I didnt know it until I stumbled upon one. Of all my guitars of 400 to 1200 dollars, the sterlings are just completely a different level of quality in every way

[@leonthompson8988]

Same finish as what was on Santanas first PRS. Love it

[@SolarWarden33]

I love maple necks. So cool to see this has that.

[@malicesmom]

I've never heard of an asymmetrical neck. Very cool.

[@MrTooter007]

I have had many of these over the years, starting way back when "Kimberly" was making them (Canadien import) and then the OLP (Officially LIcensed Product by Ernie Ball Musicman), then eventually the SUB and Sterling model imports by Ernie Ball Musicman. Always a fun guitar to own because of tie in with EVH history of course. This model with the five-way selector is my favorite iteration of the Axis, most versatile, and if you keep the nut lubed, you can dive bomb almost as much as a Floyd. To me, nothing feels as excellent as the American made versions, but these Sterling models are very nice overall and can easily be tweaked to almost as nice with some neck work, gunstock oil, etc.

[@anthonylardo6969]

Can't believe no other channels are doing the sock test.

[@speedypete07gnarly]

I own this exact guitar and also a red SUB ax4 and this guitar feels way better and stays in tune more than the ax4 model, (and my ax4 has tons of buzzing and I cant have the neck nice and low but the Sterling Axis is perfect) Great video demo Phil!

[@davidknipe3536]

With the older sterling guitars, they were sent to the USA factory for inspection and setup,after manufacture. There was a sticker on the body explaining this.

[@mickwells9431]

I do not doubt it's setup well outta the box. I bought a Sterling by Music Man Cutlass in mid '20 and it was spot on. That was their $249 SSS Daphne Blue model. Excellent fret edges and string hieght. These new Axis models look appealing without a doubt. They have came back out with an upgraded Cutlass with a baked neck and I believe locking tuners for $399. I dig both colors of red and gold. Phil I thank you and Sterling for sharing the Axis with us all. Get the Cutlass Cutlass HSS from them if you can. Thanks again Phillip.

[@jeffrocx8599]

This is much improved from their last rendition. Makes me want one!

[@kiz1000]

I love your videos Phillip! Great review, detailed as ever and really informative. Thanks 👍

[@PhillipMcKnight]

Much appreciated

[@ileutur6863]

Sterling in the US - cool mid range affordable brand Sterling in Europe - costs as much as a used MM USA model

[@andybushell4423]

£499 in the UK thats $690

[@ileutur6863]

@@andybushell4423 On thomann they're regularly above 1k...

[@elgonm289]

@@andybushell4423 , yeah I saw that it is priced at £499 no point shopping around because every shop is selling at that price ☹

[@bayouboattrash]

Really digging the diagram on the side of which pickups you're using! Thanks Phil!

[@demian113]

Basically the new version of the OLP MM1 guitar circa 2002. Those were phenomenal and only cost $199 back then. Great mod platform and the neck is excellent 👌

[@modergav]

I love the Axis. Music Man made a great move mantaining the Old EVH model on their lineup. At thid pricepoint Sterling Beats epiphone any day of the week.

[@xennialmusic]

Thanks so much for deep diving into the tuning stability! That is the #1 feature that is drawing me to Music Man guitars.

[@alansamsmusic]

The flamed finish on this guitar is most certainly a selling point. For an inexpensive guitar those pick ups sound really chunky.

[@alansamsmusic]

Been waiting for this video! Thanks for doing it!

[@docsworld1369]

Very happy with my EVH Wolfgang. May have to get one of these. Looks like a great value.

[@57stratkat]

Every Sterling I have played has been impressive enough to feel like it's hard to justify buying a more expensive model. Serious bang for the buck.

[@skillzwitpillz1259]

I have this guitar in a number of different iterations, some even with the custom dimarzios, and they're all fantastic guitars.

[@chrisflashmusic]

love mine too, great guitars! \m/

[@santrixhimself3679]

I had one of the old series "OLP" versions of this guitar, which where madenin the 90s iirc. It was such a great guitar. I had only played for 2 years at that time and that guitar made me instantly play better. I miss that guitar, looking back it was perfect. Also crazy under value cheap

[@picksalot1]

I think that the combination of a Poplar sold body and the Maple neck and fretboard seems to produce a very balanced sounding guitar with excellent tone and sustain. The Maple cap is a nice visual touch along with the matching headstock. I've always liked the 4+2 tuner design, and the price is affordable. That is a lot going right with the Sterling model. Thanks

[@Anjohl]

Those pickups sound absolutely superb.

[@seanenright5597]

I just bought mine today! I really love it. No complaints. Just a fun ride.

[@audiointern2699]

Hey Phillip. I just picked one of these guitars up (last one in Canada) and your right it is really good! Great out of the box but no gig bag. I just need to set up the tremolo as this was not done. Thanks for all of your videos as they are great!

[@kripes4967]

Love these informal first impressions! Displaying the pickup selector position from the player perspective vs the viewer perspective always throws me off. Just trying to help the channel!

[@anthonyskellern5970]

Always worth listening to Phillip's point of view on guitars! This video is close to home for me - in December I bought a 2015 Sterling Cutlass off eBay in great condition. I had been researching the Cutlass and was confused by the different versions and price points. I soon realised that my Chinese built CT50 is no longer sold, and been replaced by a cheaper built Asian model (CT30)... now with a flimsier vibrato, ceramic pickups, no locking tuners etc. Still a good guitar (it's MusicMan!...but I''m glad I found my beautiful mint green one!

[@chevycawlfield3787]

I’ve been waiting for a review in this guitar in this color!!

[@rufusevans7844]

Love this guitar, it's on my list now!

[@drdrums1]

Nice review! I have the Neptune Blue version, just got it last month. As for fret work - mine left much to be desired. All the frets felt gritty, and on close inspection it appears they ran a sanding bar across them, then shipped it out - you could see the tooling marks. I spent several hours with my fret erasers and a polish cloth, and they're all good now. Also, the action on mine came in around 2.25mm on the low E, but it was easy enough to lower with a little turn on the bridge posts and lower each saddle a turn and a half. I got it down to just a hair above 1.5mm, right where I like it. Like yours, no fret sprout, so that's nice. Completely agree about the trem arm. I have two SbMM Axis, and they both have slop, so it's part of the design. A few wraps of teflon pipe tape around the threads does wonders, and takes out much of the slop. I have no idea if mine shipped with 10s - I didn't measure, and I changed strings when I refinished the frets to a set of EB slinky 9's. Finally, I didn't know that was how the switching worked - I thought it was like the EBMM Axis SS setup, where pos. 1 is bridge, 2 is outer coils of each pickup split, 3 is both pickups, 4 is inner coils of each pickup split, and 5 is neck.

[@mikerooney8735]

This is a long shot but I grew up a huge fan of Omar Rodriguez-Lopez so I'd love for a review of the Sterling Mariposa but I don't think anyone will ever make a video on it. Thanks Phil, learn something every time I watch a video with you!

[@alexaguado4854]

I bought one from musicians friend. Call them an they’ll give you 15% off. This offer is not on their website. I’m really happy with it. It’s a lot like this review. The neck is roasted and is unglossed along the back of the fretboard, where your thumb goes, but is glossy behind the head stock. No fret sprout. Only complaints are the frets are rough and the volume pot for the bridge pup has a slight uneven roll. I polished the frets with fret erasers and the pot isn’t a big deal.

[@AndyNyle]

you really know how to properly mic those amps. nice demo!

[@JBI1]

The Sterling guitars, especially the Axis are great instruments for the money, I have a couple. I was also shocked how great the pickups sound, they have a nice growl to them when you're using distortion. Mine have the overseas made non USA Floyd Rose, not the standard bridge that you have on yours.

[@bobbya8622]

Nice guitar! So many cool guitars out there, and finding the one(s) that we like best is a task to be sure.

[@johninama585]

I have a black one and I love it. I got a graph-tech nut installed and the G string still didn't stay in tune. I just added a spring and forgot about it. As a hardtail it's perfect.

[@57stratkat]

I have a Sterling AX-4 TRD with Sterlings floyd copy. Stays in tune very well. Put Dimarzio's in it and it's spot on - a killer ax for small money. I love the 5-way wiring scheme Sterling does on these models. Wide tone palette without the typical anemic split coil tones from the push/pull pots most companies opt for. Really a brilliant budget priced guitar.

[@AAllinsonNN]

Dude, Phil!!! You rocked the playing!! Amazing stuff and the guitar looks and sounds gorgeous. My recent purchase is an Ibanez MAR10 on pre-order, but for 1/4 of the price, this looks like a hell of a player!! This is definitely going on the list

[@davidmarshall935]

Thanks Phil, my Sterling Stingray has the asymmetrical neck and the best non floyd trem I've ever owned and I've owned a few. Great guitar

[@fen79strat]

Took some time to comment: bought one of these in the blue. Frets were finished great setup so so. Second time your reviews have cost me money first was the Relentless bass pickup. Hope they make a Jazz style soon my Spector bass has a Dimazio stacked in the bridge now. Thanks Phil.

[@scoobers90]

One of these with a Tele bridge pick-up would be so rad!

[@kirkscobey3031]

Look for an older James Valentine Sterling for that setup

[@dustdevilz4771]

Looks like a great value. Great time to be a guitar player.

[@ctrlcf]

Phil have you considered looking at the Yamaha Revstar line? I bought the RS820CR off Reverb and have been loving it and would love to hear your thoughts on it

[@DANWRIGHTITIS]

Great Video!! i bought one about 3 years ago for pub Gigs cos I needed to Retire my EBMM EVH ! It arrived from UK to Madrid in tune. The Guitar was faultless & sounded fantastic but the neck was too big for me! Wider & a full 11mm more girth at 12th fret with the ´Asymmetric´ more exaggerated than the 92 Eddie. My LES PAUL mate Loved it. This thing was built like a SHERMAN TANK!! My zip split in my old gig-bag & the guitar hit the Granite paving with barely a scratch!! It got a new home!! CHEERS AS ALWAYS FROM MADRID ps: I just measured my 92 Eddie Van Halen . Nut is 41mm. last fret width 54.5mm

[@johndoe-br9kv]

I got a gut feeling Sterling knew you were the recipient of the guitar and they selected the best and increased the stringent inspection criteria Shipped it out to you

[@barbmelle3136]

From Leo: I don't know anything about that model, but our family bought 2 Sterling guitars and they are excellent.

[@lucnebra10]

Been waiting for this video! Thanks for doing it! I own one and I loved it!

[@kyrandell3290]

Another excellent presentation Phil. Many thanks, K

[@alexaguado4854]

I bought the Mariposa and it was very nice out of the box. I lowered the action to 4/64 and polished the frets with fret erasers. There was no fret sprout. I liked it so much I sold my fender and ordered the ct50.

[@edwindude9893]

I love that guitar, the only thing I’d change would be the knobs to wooden ones.

[@pb12661]

I've always liked these axes.

[@MarshallAmpMan]

Phil you do great reviews! Can you do one on PRS DGT?

[@avh9394]

Phil love this Guitar!!!!! Hate the finish! Love matching headstocks! Give me something new! Sparkles, Metallics, Sparkle Metallics! I love the lower end versions, the Tuxedo Styles, I think they're the same 5 way switch wiring, not sure about the neck shape tho? Show me some Sparklie Metallic Oranges, Golds, Greens, Lake Placid Blues or something similar to avoid copyright fees, a flat deep Rose/Crimson red, maybe a Stryker style red? Tuxedos, with pearled coloured bindings black and white! Hey Sterling, I'm available for consulting, lol! How about an ebony or Roasted maple neck, while we're at it? You have it on your higher end S-type guitars and lockers. Eart Guitars showed us you can make a tonne of profit and still quality woods and components, with a great finished product! Well...., just a thought! Thanks Phil, great vids, keep 'em up!!!! P.S. did I mention Metallic sparkle Purples?

[@jimtomatola]

I hope you'll check out a regular "store bought" version in the future to make sure you weren't given a hand massaged "ringer". ( " Phil likes 10s, put 10s on it and set it up " )

[@TennisOnion]

That is a legitimate issue for these youtube guitar reviewers. I was so excited about a Schecter model Darrel Braun reviewed until I saw the store models that weren't even close to what he reviewed. Such a shame...

[@mattfarrell4284]

@@TennisOnion Darrell Braun is a paid moron who can't even pronounce REVERB the right way!

[@VioletSerenade]

Wish it had a Floyd on it! I’d love one to do the 90s EVH thing alongside my Wolfgang.

[@thrash8315]

My LTD MH-1001FR has the same asymmetrical neck. I love it. It is my favorite and No.1 axe.

[@cerveshred]

I have the ax40 same color with sterling floyd rose. Such a great guitar for the price, I don't like the bridge pickup, but the rest is pretty good. Some times I prefer over my San Dimas.

[@beridus]

Huh. That's probably the nicest $399 guitar I've heard. Very very cool. Love that blue they have!

[@lebroucke]

I own an EVH Wolfgang Standard made in Indonisia and that thing is a beast!!! My japanese RG570 Ibanez is collecting dust ever since I got it.

[@jamesstewart8054]

Phillip another great video. Sterling finally has a price point that is a great deal. Cheers James

[@samquitkin338]

The Neptune blue model looks super nice, I'm really contemplating buying one.

[@danrobinet1785]

Was not expecting that price! Dang!

[@jan-michaelnelson6571]

Excellent surprise!!!!!! Great review. A minor disappointment of option of string through bridge for prog/fusion players but having it back!

[@Jon-en3jz]

Hey, I would love to see you review the Sterling Cutlass CT50 HSS.

[@terryweingart6142]

Sterling Cutlass CT 50 HSS or SSS -doesn't matter. Would love to see that review.

[@jetblack7044]

Sounds so cool

[@sunnyhaair]

I just wish they made a red one 😭

[@CrackidoodlE]

Know this is sorta cliche, but I feel so lucky to be the first to comment. The guitar looks great, might consider buying

[@michaelsullivan1262]

😐

[@toddahay317]

Excellent review!

[@edwardsmith9801]

The sterling cutless if you haven't done one yet, my suggestion, the new baked m aplenty neck. Thanks Phil love the show.

[@petebrown3715]

Hey Phil, Thanks for this review🤘👍🎸. I have been considering buying this guitar I still have my 2004 olp MM1 and it plays great however my older brother who just started playing in the last year want to buy so I told him once I have the replacement bought he could buy my olp. Guitar looks and sounds great. Thanks again Pete from Chicago

[@TheBeriking]

Great review. Looks like an awesome guitar. It’s getting really hard to choose with so many fantastic options at the lower price points. And that’s right now with the supply crunch. Once they solve it and start meeting demand, look out! We can probably expect promotions galore. The only challenge is to have the patience to wait it out... First world problem if there ever was one!

[@michaelkassel5816]

This review is great!

[@brad-guitar-miller813]

Great alternative to a wulfgang . I have the Sterling SUB Bass and i really like great quality at very affordable prices. I compared it to the actual Music Man version honestly couldn't tell the difference.

[@BladelockAPL]

Man, that looks just like my 93’ EVH Music Man

[@michagrabowski6753]

Phillip, are there any chances that you will check out fairly new Gretsch Electromatic G5222 anytime soon maybe? :)

[@Dian2Gig]

I purchased a Sterling short scale cutlass online at GC and it was missed the final buffing of the frets so bends felt like I was scraping against sandpaper. Even after removing strings and trying to clean and polish myself. It was also dusty and felt like it was in the box over a year and a half. I promptly returned it and sent an email to Sterling. They appreciated my feedback but that was it.

[@chopper4484]

Looks like a great value guitar. I love the asymmetric neck on my Epi modern SG so would probably like this as well.

[@dbmabe]

That reminds me of my old OLP MM1. Same color. One of the guitars I regret selling.

[@lehmusic2675]

I have a Sterling Valentine model plays great!

[@arodrigues14]

I like that guitar than I thought I would

[@Randy.100]

Hello, great guitar. It would make a perfect couch guitar with a little practice amp. I'm impressed. Thanks for another great informative show. Randy in The Great North Woods of Michigan

[@bartlettpsj]

Clearly setup to match Phil's preference of 1.5mm action. I think it sounded great thru the dirty shirly. If they just spend another $10 on a better nut.

[@rezolution6272]

Here's what I don't understand. I have a Mitchell from guitar center. It's been heavily modified but still it wouldn't stay in tune. I bought "Ratio" locking tuning keys 140.00 at the time. The guitar still wouldn't stay in tune so I buy and install a "Graphtech" nut myself. Now it stays in tune. 13.00 did what hundreds of dollars could not. Anyone with a non locking nut guitar should make this small investment if you have a plastic nut. I had heard of them over the years and thought wow that could be a lot of work to install. Literally 20 minutes. Also Mitchell guitars uses the graphtech nut now on their guitars. So if you can buy a 200.00 guitar with a "Graphtech" nut but MM is still using plastic on a 400.00 guitar.... ??? Time to stop thinking about profit and start thinking about the player guys.

[@jimcamp2423]

At 5:38, what I don't like about the Sterling is where the screw location & wire are the corner. To me, if that wire rubs or vibrates against the screw, over time that may damage the insulation around the wire. Take it apart enough and does the screw damage the wire insulation. The screw hole already looks sloppier, like it's too close and thin to the edge of the routing of the body for that cavity.

[@30smsuperstrat]

The Axis is the most attractive shape of EVHs line of guitars. While a carve top in the Axis would be cool, they still have the best silhouette

[@bozeeke]

I just got mine in the mail a week ago. Being a Van Halen fan who doesn't like Floyd Rose guitars, a MM Axis style guitar with a Fender style bridge on it was right up my alley, especially without the $3000 dollar American Music Man or USA EVH Wolfgang price tag. I think it's a great ax at this price point. Thought I'd have to change the cheap pickups but they sound great. Might upgrade with a graphtech nut and some locking tuners but that's about it. My only two minor complaints are that the frets, while having no major issues, were a little bit gritty (could have used a crown an polish) and the book-matched flame maple veneer has a more pronounced flame on one side (as if they put two thin pieces of maple veneer on it and one side was slightly better quality flame than the other). Overall though, great guitar for the money. I'm interested to hear what you would do to it if it were a 'Sharpen Your Ax' project, Phil.

[@williamwhite1957]

Really looking in to getting a reverend. Would love to see reviews of some of their models and any insight on positives and negatives. Thanks!

[@elihue_redneckreview]

I have a Reverend Manta Ray and it is absolutely amazing! I have quite a collection guitars and it's my favorite! A friend of mine has a Kingbolt and it's equally impressive! I highly highly recommend the Reverend guitars, they are well worth the cost of admission! Beautiful finishes, excellent playability, and great tonality with very sculptible EQ to replicate a single coil sounds without the push/pull pots.

[@williamwhite1957]

@@elihue_redneckreview thanks for the feedback. Much appreciated.

[@brad-guitar-miller813]

FYI Love the KYG work shirt, I want one of those!

[@jonathane40]

Thanks for the great review! It definitely looks great. I recently got a Sterling St. Vincent and I was impressed about the quality of the guitar given the price. I also enjoyed your video in the Sterling St. Vincent! In terms of quality, do you think this new Axis is better quality than the Sterling St. Vincent or are they very comparable? Cheers!

[@varunZinger]

The drive sounds great, very Van Halen!!!!

[@d3agl350cal]

I find it so surprising on those fret ends, 2 years ago i played a cutlass ct30 and it had super sharp fret ends. maybe they had enough complaints to finally fix it, or the one i played was a fluke

[@stufromoz8164]

I reckon the company has set this guitar up specifically for Phill , influencers reports on these instruments have more of an effect on sales figures than anything else. They even put on the string guage that Phil l;ikes, they have had a good look at this channel then set this guitar up to get as positive a report from him as possible. There is nothing wrong with doing this I just think I am starting to see more of this sort of thing with companies that are providing guitars for review with influencers.Great looking guitar for it's price point but they are not that cheap in Australia, we get ripped off here massively when it comes to guitars.