Stetsom Amplifier Review Export, High Line & Iron Line Series

Detailed Stetsom review of the 3 main US imported Stetsom Lines. Including the Export, Iron and High Line amp series product from Brazil.
Innovation
Designed to be objects of desire, the STETSOM products occupy a prominent place in automotico sound stage.
When it comes to STETSOM you soon associate with the brand slogan: "Unlimited power".

[@computercomputer2957]

Should I use over clip for my midbass speakers

[@DinasGarage]

Nice Thanks Martin been a while!! Glad to see ya back!

[@elchapulin610]

Whats does the Ex3000EQ 2ohm mono high power means ? Is that still 2 channels, im kinda confuse

[@drvictoria07]

Does the export amplifier have 0 gauge inputs for power and ground and 8 gauge speaker terminals? I would like to use my 1/0 dual inputs if possible.

[@paulsvideos133]

Is the Stetsom EX 3500 EQ 2 Ohms Amplifier 3.5K W Bass & Voice Car Amp - any good

[@workingclassperson2124]

UPDATE-I have the 6k 2ohm running 2 15’s first I had custom Hcca’s now I have custom Adire audio 3000kh’s from a sub builder [5-8 audio]. Had trouble tuning but just recently I learned if you want to get really low like 28hz-18 hz first make sure you have a upgraded Alternator do the big 3 and at least 2 batteries and your box tuned right. I have a U.S Alt 250 amp and two XSpower d7500’s with dual runs of zero gauge power and grounds and dual power and grounds running to the amp. I basically have my gain almost maxed and the bass level since it’s set at 45hz at -7 levels go from -10 to +10 I no longer get the clip light to even flicker let alone come on so I know I’m good. This is different technology and I couldn’t find anything for tuning them so I just kept playing around till I got what I wanted out of the amp now it SHLUMPS! I like to play in that 28-18 hz with Authority! And now I can all day. Just be careful some slowed or rebased stuff isn’t recorded cleanly and could have distorted signals in it. My subs now run cool to kinda warm. My amp runs Luke warm to barley warm. Dj dropn dj deep Bassotronics ALL DAY!

[@CauserHostCH]

godly setup. what's your full setup?

[@onepiecewarlords]

if i have 8 mid range wired down to 1ohms with a total of 2800watts rms, will the stetsom ex3000 1ohm be good enough to power them?

[@631alexander]

onepiecewarlords ofcourse it will be perfect

[@_JiggaFlexinx2]

@@631alexander what about 6 10 inch 8ohm??

[@mester84]

That little 400x4 for tweeters and drivers dos the power advertise and some but in hi pass in flat or low doesn’t berry good you won’t be disappointed thrust me

[@dustinlouthen2773]

Do u still have these amps in stock since shipping has been affected cause of covid

[@yousfiamar]

Excellent and continued

[@melvinboyd4654]

Will this amp beat like a mono block amp? Whats the difference in a full range and a straight mono block amp

[@amordeweso]

Full range can run coaxials 😅mono just straight subwoofers if I memb right

[@CoolieMaster-wd3ec]

I like how he is honest on the iron line 💯💯💯💯💯

[@Lesscoelectronics]

Thanks, I try to be

[@Poweredbypowell]

Good morning how do you set the long distance SX2 remotes to a pioneer 80prs

[@tonytrevd4881]

So if I buy the stetsom10500 one ohm version it puts out the same power at 2 ohm?

[@workingclassperson2124]

I got a 6000 eq 2ohm a few days ago wired it up and have been happy with it. Stays cool to warm at most my subs are no longer getting warm to hot with my other amp I was under-powering by half so it’s going to happen. Love the over clip button:) .9%thd can’t hear the difference from 1% thd amps amazing bass. Just a lil confused on how to tune it. And ya not much info on KZbin about Stetsom. And if Stetsom wants more Americans to buy there stuff they should put out stuff in English I’m Latino but don’t understand Brazilian. But the amps can speak for themselves:)

[@BiG.BOSS.TSi.]

Why would u need the manual? Do you not know how to set the amp for your needs? Keep your hpf down turn lpf half way and use a song with variety of frequencies from 19hz to 60hz

[@BiG.BOSS.TSi.]

If you dont like the response and want more low low then turn the lpf back to a quarter.... play the same song and repeat process plus or minus...

[@TheMasterkiller24]

Nice video... Quick question... Im a Stetsom fan... Im installing 2 Sundown s4 d2 subs on my motorcycle 2 0hms which stetsom amp would you recommend... Ex1200, EX1600, or Ex3000 I just want to make sure I have a lil room so that amp is not working hard

[@mem10fan2]

If you don't want the amp working hard run it at 2 or 4 ohms. Then upgrade your electrical with a quality HO alternator, OFC wire, and renowned batteries

[@It-b-Blair]

🤯 subs on a cycle? Brilliant! 🤘

[@earljohnbinondo2419]

Best amp eq3000eq or hl1200.4 stetsom?

[@Redchevy1977]

Have you used a 3k black edition on subs and if so how do I set up thanks

[@jimmiecrenshaw7864]

Im planning on running 4 10 inch american bass woofers. Which amp would u recommend? In a 07 saturn aura?

[@It-b-Blair]

There’s a lot of factors. You have to use some equations (there’s good dedicated sites where you just put in the subwoofer values and wiring arrangement). Depending on how they are wired you set what ohms your using, then you can calculate the change in watts due to ohm change, and once you have how many ohms and watts your going to use you can then look for amps that can do that. You can blow the subs if you overpower, and you can fry the amp if you under-power. Don’t set your car on fire! 😸👍👍

[@BOOMINGBEAMER]

Hey I'm kind of new to this line trying to find as much as I can unfortunately not a lot since English so thank you for that first off. I'm looking at the big boy 10500. More of a too much power but tune it down situation allow me to explain I have a SSA team evil 12 in a custom box tuned at 29 HZ. It's a D1 so obviously I would be using it at 2 ohms. It's rated at 5K RMS any advice on this particular build I'm very much looking to do this

[@It-b-Blair]

Check out Williston audio labs review of the Orion 8k, it burps to 14k 🙀 sounds like a sweet setup btw… guessing you finished, what did you end up doin?

[@BOOMINGBEAMER]

I have a demo car we're putting together I'm looking to go a little crazy I have a SSA team evil 12 D1 gen 1 tuned to 29 Hz. RMS is 5k. I'm looking at the 10k @2 ohms. Looking to tune it to where it won't kill the sub but perform the hell out of it your thoughts and suggestions

[@A-bomb-1984]

Didn't big d blow one of these up?

[@tMAConDUBS]

So a 10k rms amp has single 2 guage inputs???

[@mem10fan2]

Exactly what I was thinking. It needs dual 0 guage inputs at a minimum.

[@It-b-Blair]

Very sus… need to see the guts

[@dcmroady]

Hello sir I have 4 prv 10w650a and 4 prv 15w700 I am wanting to pair them with these Stetsom ex3000eq 2ohm one per set is this a wise choice for these speakers and will they handle it? Thank you.

[@performance808]

2022 update? Hearing they smoke up cause no current protection

[@maheshwarajonas768]

What is the price for the 10500 watt amp

[@jaymo7078]

How do you tune an 8k 2 ohm I have the gain all way up and I know it shoujj lol d be getting way more power than I’m getting and bass level all way up

[@EVO_IX]

Is the ex5000 good for bass?

[@Lesscoelectronics]

oh yeah, definitely

[@brandenandpitbp]

Can the 10.5k handle .5 ohms

[@Earlburns1976]

I have 2..2 ohms 15s solobarics. that's why I got the 3k stetsom 2 ohms

[@kewingpaez5808]

I have 2 dc audio xl and I want to buy a 5k stetsom amp but when I go to buy it it shows me ex5000eq and another stetsom amp 5000eq

[@jermainehouchins5216]

Where are you located at I have a stetsom vulcan 5000 watts and I do SPL. But I need a bigger amp. Please get In touch with me and let me know where I can come to your shop I live in Bowling Green but I will travel to you to get a bigger amp

[@hitorsh1t]

Detailed?

[@jackhinkle1401]

I have 2 mtx 9500 4 ohms dvc will this amp work

[@Lesscoelectronics]

It'd work well on the 1 ohm model

[@jackhinkle1401]

Lessco Electronics which size amp do you recommend

[@sqfanatic]

This guys attempts to explain things is hilarious.

[@Lesscoelectronics]

I guess you and your 8 subs can do it better than me?

[@jorjeluisleaolusiano9328]

Qual o valor do módulo

[@kewingpaez5808]

What’s the difference between the new line of stetsom amplifiers and old one because I would like to buy a 5k and I don’t know the difference

[@Lesscoelectronics]

What model is the old 5k you're talking about?

[@ilovetoyotatrucks]

How much are the micro 1's? Wattage RMS & price $?

[@Lesscoelectronics]

check our site at www.lesscosales.com

[@deloncharles8140]

Hi bro I really need a 3000w stetsom 1ohm

[@KGV_Studios]

Why is the thd % so high?

[@Lesscoelectronics]

You must mean on the big one? That monster just creates massive audible distortion like any other beast in that power class.

[@KGV_Studios]

Lessco Electronics well the ex3000eq I’m guessing it’s talking about the bass side

[@Romejkl]

which one would you recomend for 4 10in prv 1003ft's? or stick to a tarramp hd3000

[@It-b-Blair]

It can change depending on how you wire them. I found most confidence when I did the math of the circuit to find what amp ratings I’d need. There’s some sites dedicated to audio calculators so you don’t have to go to university, made it easier for me anyway. You could also look for anyone with the same setup you’re going for on forums, but all that information can be sus. Crutchfield has some good resources too. 🤷‍♂️ good luck on your fantastic goals!

[@yenssyhernandez5349]

We know how to read manual. We need to know if the rates are real.

[@computercomputer2957]

My midbass speakers are clipping when I'm playing midbass

[@Dave-gq8xz]

Would you review a car without driving it?

[@jorjeluisleaolusiano9328]

Qual o valor do

[@kendrickcontent]

Any Dynos?

[@bartowflorida]

@@bigblank69 if i send you a prv audio ad8k will you test it

[@deloncharles8140]

Wanna get my car done for my birthday

[@tobagolouse7872]

How can I contact you outside of eBay

[@Lesscoelectronics]

904 342 5491

[@tobagolouse7872]

How can I contact you all to buy ????

[@Lesscoelectronics]

you can call 904 342 5491

[@chicago1680]

No dyno numbers just blabbering on? I skipped most of it

[@johnoates3326]

Stetsom is definitely better than taramps...

[@4gbmeans4gb61]

HAHAHAAHAH,,,,, YA FUCKING RIGHT>... those DONT EVEN COME CLOSE TO RATED>>>>

[@Mr.NpK143]

Guess I'm silly because 10k just isn't enough for me. But hey that's what I'm into. Ooh yeah and I also not into doing business with a person that calls me silly because my preferences aren't what he carries

[@jacobwarren6841]

Sub woofer add no musical value. Wow, thumbs down.

[@Lesscoelectronics]

What musical value is there under 80 hertz?

[@BenaresDarkness]

Did I just hear you say 2 guage power and ground input. You clearly do not know anything about it that 10500 is not strappable in other words you can't have one hook to the other input and output goes from the deck to the amp that thing is never going to do that 7500 Watts not even half that so what you have is a piece of shit amplifier

[@BiG.BOSS.TSi.]

Ummmm. What...... this amp will put out rated power and then some. Brazilian amps much?

[@anotherpos8704]

2 awg for 10KW tho, not gord

[@ezequielmurillo266]

This brand, the amplifiers doesnt do the rms what says.

[@Earlburns1976]

I'm very disappointed about this amp . I put a 3k 2ohms on 2 solo 15s 2ohms really didn't do anything to them. very very disappointed

[@Lesscoelectronics]

did you get the correct impedance match for your setup? these are very much based on the ohms load

[@bartowflorida]

The amps are rated at 100hz. At 40hz and lower youd be lucky to get 2k and thats before box rise

[@dee696]

i just did 143db at 28hz last week at nadbl show with the 3k3 eq amp and 2 15 old mojo madmax...this amp is great...must be something in your setup that isint right...

[@tonytrevd4881]

@@Lesscoelectronics so what your saying is that the one ohm version amp puts out same power at 2 ohms ? Correct? I'm wanting to buy on this one in the vid....

[@poohwecampbell7799]

Solo’s are trash...massive audio Hippo XL122R a beast..taramps HD3000 2ohms

[@alexmcduffie7944]

Is the stetsom ex10500eq strickly bass