Thank-you for watching and for the note. All the best to you. Спасибо.
@charlie4187913 жыл бұрын
Great weathering. 👍
@stevieRay32113 жыл бұрын
Thank you for the comment Charlie and glad you could stop by. And my mother said playing with mud would never get me anywhere!
@panzer-meister3 жыл бұрын
It's nice work. Also, it's easy to understand your work by step by step building and painting. thanks for sharing.
@stevieRay32113 жыл бұрын
Thanks for the note PM. The comments always brighten the day and it's nice hearing from everyone. Stay well my friend.
3 жыл бұрын
Very nice work. Greetings. Aleš 😎👍
@stevieRay32113 жыл бұрын
Hi Ales - thanks for stopping by and for the note!
@JonathanCheeseman3 жыл бұрын
Hi Tom, for this video I'm one of those "who prefer the vicarious experience of spectating" and, yeah, I found it entertaining! Thanks again for sharing your work.
@stevieRay32113 жыл бұрын
LOL Jon. When I wrote that I wondered if anyone actually reads the descriptions. Guess they do. Spectate on my friend and thanks for writing.
@RimsModels3 жыл бұрын
that was an excellent video my friend thanks for sharing
@stevieRay32113 жыл бұрын
Hi Rims - thank you for watching and for the nice note.
@joeshmoe99783 жыл бұрын
Good video 👍
@stevieRay32113 жыл бұрын
Thanks watching and for the nice note. All the best Joe!
@steveankin26823 жыл бұрын
Another great video Thomas more please. Stay safe.
@multipl33 жыл бұрын
Great channel! Subbed
@stevieRay32113 жыл бұрын
Hi MW! Thank you so much for the sub - very appreciated! Makes all the work on the videos worthwhile. I'm just finishing the AVGP video - it should be up by next week. The Stug is ready for paint too and the paint/weathering video should be posted in early September. Good luck with your own projects!
@rickmoreno68583 жыл бұрын
You do good work broseph! Your building and painting road wheels separately is a great technique, I tend to build them all at once and then kick myself when I can't get full paint coverage! Thank you
@stevieRay32113 жыл бұрын
Thanks for the compliment Rick. Treating parts separately definitely makes painting and weathering easier.
@tonyde64233 жыл бұрын
Hey Tomas fantastic build and tips stay safe cheers
@stevieRay32113 жыл бұрын
Thanks for the note Tony - always nice to hear from you! I am safe and hope you are too! Stay well.
@tonyde64233 жыл бұрын
@@stevieRay3211 hey Tomas we got covid in a choke hold keep building cheers
@ada42klm3 жыл бұрын
Mr. Tomas Barak, That was an outstanding video. You my friend make great realistic military models. Kudos to you.
@stevieRay32113 жыл бұрын
Thanks for the great note Azzy. Sometimes the work is a bit of a grind but comments like this really lift one's spirits. GL with your own projects.
@staredsky3 жыл бұрын
very cool Tom!
@stevieRay32113 жыл бұрын
Thanks Luca. Good to hear from you my old friend. Hope you and the folks at Amati are doing well. I appreciate you keeping in touch. Stay well!
@staredsky3 жыл бұрын
@@stevieRay3211 everythings well, Tom, thx a lot. Always following your builds with interest and appreciation. All the best my friend !
@o0b.a.d.fluppy0o393 жыл бұрын
the weathering looks realy great! cheers✌
@stevieRay32113 жыл бұрын
Thanks Flup! Mud slinging has always been my strong point!
@derekbaker32793 жыл бұрын
Great videos, as always! 👍👍 I built both this model & Trumpeter's "Ekranami" KV-1 about 10 to 15 years ago, and I have no recollection of the obvious gaps, fit problems & problematic flash that you encountered. So, I think you were absolutely correct when you suggested that the molds are getting old & in desperate need of retooling. Also, I wonder if individual molds can shift or deform with time as well, which would explain the gaps & fit problems. Nevertheless, as you clearly demonstrated, the problems were not difficult to solve...just a bit more time on construction before the fun painting/weathering could take place. And, I love the finish you gave the big beast! It looks like it has been rolling around in the mud & marshes while chasing Nazis near the KV factory in Leningrad (*)....but the kit's good detail & blocky, intimidating lines have not been obscured. 👍👍 Well done Tomas! 😊 (*) After reading about (a) some of the shocking & frequently deadly encounters with the KV-1 that the Germans experienced by while manning their Pz. Kpfw III & IV tanks, and (b) the surprising vulnerability of the early T34 tanks, I happen to believe that the KV-1 is much more responsible for rattling the confidence of the Panzer divisions during Barbarrossa than its sleeker, more highly-lauded Soviet comrade. IMHO, the T34 really seemed to imprint itself on the memories of Panzer leaders during the Soviets's desperate counter-attacks as the 'Rasputitsa' arrived....then again, during the first bitterly cold snowy winter of the Soviet-Axis War, when the Germans approached & stalled in front of the gates of Moscow. It was at this point that the T-34 gained a nickname, "the Snow King(s)", in honour of the T-34's speed & superior maneuverability in conditions that frustrated the Germans & even limited the KV-1. To my knowledge, the KV-1, while feared, never received any sort of complimentary nickname from its adversaries like the T-34 did.
@stevieRay32113 жыл бұрын
Hi Derek - thank you for the amazing note. Always nice to hear from people with similar interests and I appreciate your feedback. I agree that the T34 was a lemon in its initial form (two-man turret, belched smoke like a sausage factory and noisy as a bad punk band). But I think in the end it proved to be a war winner as its turret and gun were improved. The 34 did everything the KV did but better and the latter's gun was just too puny - a whole lot of tank for not too much gun. Still I really enjoyed building the KV although I think the Tamiya release is better overall (if you can stomach the price). Once I finish the AVGP cougar I've got a Stug calling my name but after that I can see trying my hand at a T34 in the near future. Stay well Derek and hope to have you visit again!
@steeliron82463 жыл бұрын
Very good and helpful video, good ideas and tricks, really very good, thank you for that :-)))
@stevieRay32113 жыл бұрын
You're very welcome and thank you so much for the nice comment. Build on!
@epicforger123453 жыл бұрын
Great build video was very good, when blending the oil streaks did you have thinner on your brush? Or was it dry
@stevieRay32113 жыл бұрын
Hey Epic, thanks for writing. Definitely use a wet brush when streaking. You want to blend the colours and be able to draw them down the surface. How much you leave on depends on your taste or the environment the vehicle is operating in. Thanks for watching!
@gri7 Жыл бұрын
I'm building this and adding heavy chipping and battle damage. But I'm weary of installing these tracks
@silvestersze99686 ай бұрын
Undercoating raw steel color you use brown, black and red? But all I can see from the video is black; I don’t really see any brown and red in the mix? 😅
@silvestersze99686 ай бұрын
How much dilution for the main green color on top in order to show the some undercoat of raw steel color? 😅
@stevieRay32116 ай бұрын
Hey Silvestersze, thanks for the note. The undercoat color is sort of a raw steel colour which is very close to black. The lights and the video sometimes distort the actual colour. I add a bit of red and brown to give it that light rust patina look. Look at these raw steel slabs, www.pinterest.ca/pin/137359857361138693/. You can even see some blue in there. I don't dilute the overcoat to show the metal colour underneath. Rather, I spray lightly with an airbrush so as not to cover the undercoat completely.
@silvestersze99686 ай бұрын
@@stevieRay3211 Thanks so much for your replies. Gotcha! I’ll definitely do that. I really appreciate that. I’m now building the exact same model as in the video. Trying to get a hands on with this experience. LOL 😝
@silvestersze99686 ай бұрын
@@stevieRay3211 I do have one more concerning question about the steel slab. I went to the link you’ve provided (thx btw), I think the steel slabs (or any kind of metal) should have different degrees of metallic silver-ish shininess, shouldn’t they? Should I add some silver paint into the over coat (black-red-brown)? Please advise. And thank you again. 😄😄
@stevieRay32116 ай бұрын
Bare metal that's exposed to the air and elements looses it's shine almost right away. Also you likely don't want too much bright shiny metal on your tank. You can highlight, here and there, with a pencil but don't overdo it. See the M5 video, it shows the pencil treatment. Good luck.
@silvestersze99686 ай бұрын
@@stevieRay3211 Ahh… got it. Oxidation. Sure, I’ll look for that M5 video you’ve suggested. Have a nice day!
@lehagusev5833 жыл бұрын
Приветствую! Отличная работа! Только на декали буква "Н" не дописана... "гадиНу'
@stevieRay32113 жыл бұрын
I can't read Russian but thank you! I have since put your comment through a translator and it says that the "h" is missing in the lettering. Not sure if that's an oversight on my part or Trumpeter. But thank you for the clarification.