What kind of screw should I use? Woodworking Basics

Get my curated list of affordable woodworking tools. Never overspend on tools again► theweekendwoodworker.com/tww-...
Why use screws instead of nails or glue? What types of screws should you keep around your shop? While I prefer glue for most projects, there are certain scenarios where a screw is necessary in woodworking. Here are the basics.
----------------
Equip your woodworking shop for under $1,000: mytoollist.com
PATREON ► / wwmm
TOOLS I USE► amzn.to/2F3hxQc
WWMM T-SHIRTS► amzn.to/2scxfYl
FACEBOOK► / woodworkingf. .
INSTAGRAM► / steveramsey_wwmm
----------------
MAILING ADDRESS:
WWMM
448 Ignacio Blvd. #237
Novato CA 94949
----------------
Woodworking for Mere Mortals® is a registered trademark of ZRAM Media, LLC.
#woodworking #powertools #WWMM
Category
Howto & Style
_
Music:
"Princess Meow-Meow's Theme" and all the cool music on WWMM is created by Per Almered. ----AWESOME!

[@michaelrichardson1367]

Steve I have been recovering from total knee replacement surgery and am now 6 weeks out and recovering nicely. During these past 6 weeks I made some life changing decisions regarding how I wanted to spend my retirement. At 72, I have a few more productive years left before I decide to turn my law practice over to my son. But not being able to predict the future, I wanted to start now to develop my skills as a woodworker so that I can fill my retired days doing something useful. During my recovery I found sleeping to be almost impossible at times and have often pulled out my iPad and watched woodworking videos. Yours are some of the most enjoyable ones I have found. You manage to convey necessary skills in a way that is both entertaining and insightful. There may be more skilled woodworkers out there, more elaborate shops, better equipment, and so forth but few channels convey the warmth, humor, and I think, the general caring about the craft as does yours. Keep up the great work. It may not bring about world peace but you may bring about some inner peace among us mere mortals. Yes I have enrolled in your weekend woodworker course and look forward to the day I can get back in my shop and stand on two good legs. Thanks again.

[@drdanbhcmg]

At 62 I started a few years ago and now everyone in the family has had me do or help with a project or two, I am having a great time and it is very rewarding.

[@jonashworth9757]

Michael Richardson I know this is an older video, and you may never see this reply, but I just wanted to say God bless you. I respect you older dudes, and comments like yours is getting rarer by the day. America, and the other parts of the world as well, are losing the ability to be kind to one another. It makes me feel good when I see someone genuinely express themselves in a positive way. Hope you’re doing better.

[@deb7986]

I'm so glad to see this comment from a Mature Person (*grin*). I, too, am retired. I was forced into it because of a health emergency, so I had not "prepared" myself with a hobby or passion to carry me through whatever time I have left. I am now 65. Recently, I stumbled on these videos, and suddenly I had found my passion! Although my father was an expert carpenter/handy-man (his father was a millwright in the lumber industry), he never passed his knowledge on to me. I pestered and pestered, and followed him around like a puppy, but...I was "just a girl" and "had no reason to know all that stuff". Sadly, my brothers seem to share that bias. So I, too, am forever grateful to Steve for empowering me to make stuff. I'm no longer terrified of power tools, am beginning to see how things work, and this channel is opening up a new world to me. I used to call this knowledge "Guy Magic", because it seemed to me it was something guys just knew, intuitively. I know better now. Steve explains clearly, and doesn't talk down to me. And he doesn't care that I'm "just a girl." LOL!! Hooray for Mere Mortals!!!!

[@Spthomas47]

This entire thread makes me smile.

[@jondirive]

@@deb7986 I'm glad you shared your thoughts. I have sons that are too young to be around power tools but my plan is to teach them as much as I can before my demise. Your post expanded my intentions and now I want to share with my wife. She's much younger than I and also has a better memory. lol . Besides, it would be nice to share one more thing of interest between us. I'm not sure she's even interested but I'm going to entertain it and see where it goes.

[@artv4nd3l4y]

Excellent video, this helped me out a lot. I'm a fairly educated guy generally, but I never did a woodshop class unfortunately. At the same time, it's unbelievable how far I'm getting already because of videos like this.

[@rubdulbah3201]

As I remember from some conversations during my engineering degree. Phillips head screws were made for automotive applications to prevent workers from overtightening parts. The idea was that the head would strip before the fastener could be over tightened preventing parts from cracking.

[@MarkSmith-js2pu]

Anything that American car companies to do to save a tenth of a cent is embraced here. They didn’t think that way post WWII until Nixon opened up China in 1972. If your old enough to remember, think about cars of that era. Now think about every damn thing we buy today. Where’s it made?

[@mindtropy]

TIP: The distance between head and shank can be used to close the space between two wood parts. If length is long enough to pass threads to other wood, it starts pulling the other one

[@zan5051]

Slotted Screws: "Basically, they suck" - Couldn't agree more.

[@tomr3422]

I restore early 1900's trollys professionally and slotted screws are horrible even worse are brass slotted screws.

[@patrickphillips7009]

your all wrong!

[@StevanDj]

@@patrickphillips7009 You're*

[@rconn4501]

@@patrickphillips7009 YOU'RE* wrong...

[@THEButterKING25]

The Brown RAT or torx

[@rockandrollerskater]

This is now one of the few of my most favorite channels on KZbin! You are an engageing speaker getting to the point BONUS you make me laugh and no prevented many DIY project disasters around my house! Really thank you for explaining the basics the way you do so that I can wrap my brain around something as small & simple screw!

[@MarkMcMillen2112]

Wow, answers to questions that I didn't even realize I had.

[@jacobras]

Same here. I always thought Philips screws were the best and stars were only for machines.

[@TRX2015]

Me too. This channel my encyclopedia for woodworking! Thanks Steve

[@wendytorkelson9305]

I'm about 8 months into woodworking and still had no idea what to choose at the hardware store if I wasn't following someone else's project plans. Thank you for posting such great videos that explain all of this!

[@Nancy-kq3qr]

First time I've watched Steve Ramsey. I was planning to just watch the basics, but he's so entertaining that I watched the whole video. His style reminds me of Bill Nye the Science Guy, fun and informative.

[@jamesanthony8438]

Steve's nothing like bill nye. Steve actually knows what he's talking about. =)

[@callumstanley8508]

@@jamesanthony8438 When i saw there was one reply, i was crossing my fingers for an educated person. Thank you!

[@aravenstale824]

Steve is the go to guy for lots of woodworking stuff. I have picked up a lot of good stuff watching him.

[@Johnconno]

He's wacky alright 😂! Hahaha!

[@dustinkayhart8811]

I’ll text back in about

[@clarencebrown3256]

I always use Robertson screws here, must be a Canadian thing. I remember my dad doing cabinet work and throwing away the slot or phillps screws and using #1 Robertson screws, this was way back in the 60s. Fantastic videos you have , real pro for sure.

[@martydibergi5228]

Retired industrial electrician in Toronto and Never had a Canadian manufactured robertson screw head strip or break using thousands over the years running conduit or fastening chain for lighting the chinese crap screws in assembly kits are absolute crap and easily strip

[@MartiA1973]

The ONLY YT channel I watch on normal speed, you pack so much into every minute. Every other channel I watch on 1.25 speed comfortably. Great stuff.

[@Fosterjld]

Steve... out of ALL the woodworkers on You Tube you are simply the easiest to understand and you present your information the best. Keep up the great work..!

[@bearthompson6506]

First one of your vids I’ve seen. One of the best instructional videos I’ve seen on ANY subject! Focused (ie, on topic), thorough for the intended audience, efficiently presented without seeming rushed, and very relatable for this woodworking novice. I always thought camming out when driving Phillips screws was due to my own inexperience and have been very frustrated with ruined heads and driver tips. I also definitely relate to and appreciated your comment re: big box hardware chains. Locally, we have lost a smaller community store and will soon have a Home Depot and Lowe’s right next to each other! Thanks for a great vid!

[@MsKatVlogs]

I love that Steve is open about that this is his opinion and his own recommendations. When researching for a project, you are never going to read one manual and then make whatever you are going to make. You look for various explanations and then choose the information that best suits your project. This video was well made and I learned a lot, thank you.

[@steve-km3oo]

That's a great point in general. When people are reluctant to be specific and biased (people..., bias is not evil, it's necessary and everyone has thousands of bias's, without them what would you wear, eat etc??!) it's so much harder to get good information. This can be because of sponsors or afraid of hurting someones feelings or a host of other reasons. When people are honest and direct the world is a better place. It's just too bad that our media, celebrities and national news outlets bully people into conforming with narratives. Thank you for a salient and actually deep point.

[@songkim3939]

Thank you so much for the clear explanation! I'm planning to work on my diy wood project and this helps tons! I appreciate so so so much Steve!

[@CurtisMassey]

I love that you made fasterners fascinating! I'm a newbie and I always learn a ton from your videos.

[@TheQuiptastic]

Glad to see you! You've been missed! Great info!

[@SweetSpotGuitar]

Totally love the GRK and Spax for just about everything I can. I'm so done with Phillips-drive and lots of other cheaper fasteners.

[@johnthompson5370]

I really like the dry wall screws. I keep 1.25" , 1.5' , 2.0" & 2 .5" on hand all of the time. I always drill pilot holes and counter sinks. I exclusively work in pine, 2x4 or 23x32 plywood. I've never had a breakage problem. Dry wall screws are cheap, And the bigger thread size seems to grip better. The Phillips Head does occasionally break down. A square or star head would be better. I'll keep my eyes open for them.

[@Bearleaux]

I'm late to the party, but I have to say your explanations and videos are among the best for beginner/intermediate woodworking. Others tout big fancy expensive tools and jigs and really don't do a great job of explaining the why's behind what they do, it's more or less just watching someone do it. The time you take to explain the process and details of your pieces and topics is a huge help and a true enlightenment to the world of woodworking.

[@Rylan666]

Just a note, if not already mentioned, The robertson screw and the square are two different drive types. The Robertson from Canada has a tapered shape while the square is true and straight. Robertsons taper allows the screw to stay on the driver better. If you put a Robertson driver in a square head it will fit loose, conversely the square will likely jam or not fit in the robertson. Side note if Robertson and Ford had come to an agreement you would likely not have the Phillips at all but... there you have it.

[@arnoldcaines9012]

I learned just about everything taught in this video the hard way. The fact that you are using Ryobi drills validates my tool choice. I bought a set with the batteries and they are worth their weight in gold. They are reasonably priced and TOUGH. As many times as I have dropped my drill from the top of a ladder and it keeps on going. Since I've purchased the original set, I've added more tools. I love my Ryobi set. SUBSCRIBED!

[@manuelsoria8398]

What i love about your videos is that you arnt flashy and just so informative! I feel like its worth the whole 14 minutes unlike other vids that waste a lot of time! Love it thanks for the help

[@RealJoshBinder]

Can't believe I'm just discovering this awesome channel--- super helpful content!!

[@Mrs.AD0099]

I know right! Im not gonna lie, it makes me kinda pissy i didnt find him a few years ago.

[@Brando457]

@@Mrs.AD0099 I am loving the channel and his videos... I am new to woodworking and my head was spinning.

[@nimcsek]

I really wanna find but i my try's dont give befeits. One year ago i use drill screws (wood type) 8 cm long 4,5 mm dia to connenct 2 really old forniture one on bottom and on on top with great 3mm thick plate. They so good i dont need ani pre drilliong. This screws has really interesting shapes the and is like triangel and on 2 line cutted . So you can notice from a far it is not a normal scerw but working whit it is really good.

[@dylanfinch2951]

I don't know, it looks like he's just screwing around on this channel.

[@dwaynejayce4481]

i guess Im asking the wrong place but does anyone know of a tool to log back into an Instagram account..? I was dumb lost the account password. I appreciate any assistance you can offer me.

[@dailylifewithkimberly2344]

Who would have thought it? A video on screws, was perfect! Thank you for explaining them, I really needed this video. Perfect description with a great flow throughout the entire video. 👍

[@th34lch3m1st]

I really like this series of videos (which glue, wood finishing, screws). They are really handy for a novice like me. Thanks man for sharing this tips.

[@lawrencejacobs2136]

Steve your videos are the most informative and easy to understand on KZbin. Your courses are fantastic and I would recommend to anyone who wants to begin woodworking! Thank you

[@yukimarusword]

I started work at a chain hardware store and I work with the screws department. This video shed a bit of light. Thanks!

[@ktrock77]

Thanks for the primer. When I need to make a house repair I usually go with whatever screw or nail I have hanging around. Until now that is 🏠

[@PetePuebla]

This is the best education I've ever had on screws.

[@reegzz]

This dude is a real-life Phil Dunphy... and it's awesome! Thank you so much for the information shared on this channel. Really enjoying the lessons in each video!

[@shankerlalchhatri5704]

Thank you Steve Ramsey for sharing such a comprehensive information in one go.

[@marcelittalabonitta]

Oh my God! Im a single mom and have done DIY projects on my home for years now. I love it! But i have say the screw aisle in my local home improvement store IS overwhelming! I often wondered what the difference was for each type of screw but felt dumb in asking... you made this so easy to understand... so thank you, thank you, thank you! God Bless 💋

[@newsongs9917]

Hi

[@martintheron1386]

I missed a kiss.Hahahahaaha Lol.just jokink

[@tonyknievel2223]

Pro tip: not all phillips slots are made equal so keep a few phillips bits and try them out on the specific screw you're about to use. If you can hold the screw by the tip horizontally with the bit inserted in it and it doesnt fall off, that fit is as good as a star type screw and as log as you know how to use a drill properly it wont slip off

[@Cortesevasive]

yeah , because its pozidrive screw, dude such a pro that he doesnt know the difference between pozidrive and phillips.

[@aaronmoore3050]

also, some brands of drywall screws are tough. ymmv

[@aaronmoore3050]

@@CortesevasiveI’m not so sure slotted screws are all the same either. i bet the one that fits perfectly actually will drive ok.

[@mehrdadyektaparast1368]

Thank you Steve. I learn something new every time I watch one of your shows.

[@JWEmbry-wc7qi]

Absolutely perfect video for what I needed to know!! Thank you very very much for sharing this info.

[@MartDorgelo]

Hi Steve! Glad you’re back!! Greetings from The Netherlands!

[@rkfarmranch8214]

Finally, I’m no longer screwed. I now know which screws to use. Great video thank you very much.

[@pferriol]

This video is fantastic! I was using Number 12's and spending a boat load on screws. Now I am getting the ones you recommended. It is actually saving me a lot of money. Thanks!!!

[@lpconserv6074]

Just an outstanding channel. Cut to the point, give real facts, and clearly indicate when you are having an opinion. As a 47 year veteran engineer, you hit the mark directly on center, and I also agree with you on this screw topic. I am a displaced US citizen, living in retirement in the Philippines. I had 49 one cubic meter boxes shipped here from the states, and have to admit, the SPAX or specialty screws were in several of my boxes, since I knew here, I was not likely to find good screw options. It is a poor country and only the cheapest of fasteners are available and as you say, cause more problems than they solve. Broken off heads are a constant problem. Some of the wood I have to work with, "matamban" being most prevalent here in my small island, is dense and as heavy as osage orange wood, but white. You pre-drill that or learn how to dig out broken screws. Thanks for your channel and I am subscribed and will be watching. Your glue up tips (glue also imported since here there is almost NO available good glues) are invaluable to me. I have not use the proper glue methods until now, watching some of your repairs. I now know why some of my repairs did NOT hold up. Problem solved... Thanks.

[@sponge260]

Using this as study help for my woodwork exam at the end of the month, thanks man

[@tigress63]

I love it!!! You have an informative channel with and can see the humour in things. Thanks for the video! I'm Canadian and you are right about Robertson screws. I barely can find slotted or as we call them flathead screws anymore - lots of Phillips and Robertsons here in the hardware stores. Normally the guys refer to the screw that go flush as a countersink screw.

[@MuesliJuice]

I really like this guy. Honest, clear, helpful, beginner information with plenty of reality checks and humour. I don't subscribe to much but I subscribe to Steve Ramsey. Great channel.

[@themightysquid]

Wow, that just explained a lot. All your reviews are precise in detail and to the point, yet don’t waste a lot of words. Just subscribed.

[@CucumbersSC]

Oh, interesting! In Sweden I've mostly seen star drive. Initially frustrating when I didn't have the right driver and didn't know anything about what screws are good! Thank you for a useful video.

[@kf8286]

Hi Steve, being a single mom and having to do much on my own...I must say your videos incredibly rookie friendly and are a delight!!! I’m a big fan! I must ask!!!! Please please please make a video about a rolling buggy or something a adult can play with down the driveway. My daughter has a rolling buggy and she always wants me to play but I’m not sure where to start!

[@rommeldelvalle6245]

Thank you for the time you spent to explain the importance of the types of screws used for each material and the pros and cons of each. I appreciate it very much

[@kendraallen3708]

I can't tell you how much time I spent googling types of screws and never finding anything as concise and informative as this video. I'm hooked!

[@simon3dprints937]

lots of lots of good information about..... Micro jig.... I get you Steve

[@johanderuiter9842]

Mate, as always top upload explaining the ABCs for us weekend warriors in clear language.

[@tlbfarm4473]

At 4:20 talking about nails: One other negative about nails is if you have to remove them. What a PITA. The T-25 screws you discuss is all I use in my woodworking projects. Great video!

[@want2seeall]

Where to start!!! Love this video. Great job, can't wait to see the next one. Slit or slot headed screws are the devil. The Torx is great, used in the matching world, when I was in it last in 2005.

[@Etrehumain123]

Thank you, for a pure newbie this is very very very helpfull

[@2wheeledgeek555]

As a Canadian I find it funny how uncommon Robertson screws are in the States. Pretty much every type of screw is common in Robbie #2 up here. Except drywall screws.

[@ddd228]

I went to Robertson 4 years ago!

[@jonathannetherton6727]

One of the earliest, fiercest patent wars ever. Ford defined everything in this country, and had the audacity to require that Robertson sign the rights to his screw patent over to Ford for use in the Model T. Robertson said no, the US went one way and Canada went another. And now hopefully with my generation not tied to nostalgia projects, cruciform screws can go the way of the dodo.

[@manfredlaub1776]

@@jonathannetherton6727 Robertson screws are the best

[@petermacander5039]

Robertson screws are available in every American hardware store. They are NOT rare in the U.S. by any stretch of the imagination.

[@benmarkus3675]

team Robertson!

[@paulchamberlaine6757]

As always, informative, impeccably presented and of high specific value to all woodworker. Thank you very much.

[@KaerkaPhillips]

A life of disassembling things, I didn’t think about this topic much until I started stripping the heads of cheap wood screws. I’ve since moved to the GRK star-drive screws, and have been super happy with them. I wish I’d known about them sooner for woodworking.

[@fhoughloftnposdu2641]

"Yup, screws, people will argue about screws." Sums up the loudest egos on the internet.

[@kfl611]

people argue about wearing masks and safety with the covid virus, which can kill you, I doubt generally which screw you use can kill you, unless you have your ceiling fall on your head, since you used the wrong screw. So people will argue about anything, some people just like to hear themselves talk.

[@ivanlagrossemoule]

Screw you.

[@martyoriparraga9520]

fr , screw ppl anyway XD

[@vhomukwevho]

Well, screw them

[@descoiatorul]

You're just so funny and charismatic and the videos are highly informative. Instant subscribe.

[@popeyjocy]

Silverback Gorrilla right? I had the same thought

[@edgarcabatingan9883]

Thank you Steve of your vlog and information about screws,I've learned so much from it.ty

[@LuisALaboy-pd7kd]

I enjoyed the way he explained the use of screws in woodworking. It was thorough and clear about the pros and cons of which screws to use in woodworking. Great video 📸!

[@steelonius]

This was great. Thanks! I have also learned that the smooth collar section on the wood screws can be taken advantage of in order to help the boards seat together better, especially if you don't have enough clamps. By drilling a pilot hole through the boards you ensure alignment and then by drilling a second larger pilot hole in the top board, big enough for even the threads to pass through, you ensure that the top piece does not begin to climb up the screw away from the bottom piece. Sometimes in order to tighten them together you end up stripping the wood and the fastener isn't as secure or tight as you may need.

[@artiet5982]

Yes! More basics videos! Your the ONLY knowledgeable person on KZbin who makes them with amazing quality editing/content. I think we can all agree. Well except the trolls of course. But anyway, I’m getting started in all this woodworking and made your BMW. I love it & use it all the time. But these basics videos is what helps me not waste money buying inferior or incorrect sundries and tools. Thanks Steve!

[@artiet5982]

Actually just more videos in general. I have stopped watching every channel except you and ChrisFix. And you both have been too busy to post lately. Which is totally fine. I’m glad your making this channel work for you. Just miss the content is all . Keep it up!

[@randallculp9091]

Give Jay Bates a try

[@artiet5982]

Ok

[@AlexLee-dc2vb]

I don’t disagree with anything you said, but you may be interested in The Essential Craftsman. He even has a different video about different types of screws, if you’re interested.

[@tomswinburn1778]

Art, I doubt the man would be mad for recommending "see jane drill". She is EXCELLENT. A great teacher with a vast knowledge. Easy to watch and though I've been in the trades 50+ years I learn something every time I watch one of her videos.

[@ramboIII3]

Thank you Steve for your great videos. After watching several of your videos I am motivated to do some woodwork. I didn't have tools but I bought a table saw, jig saw, circular saw, speed square, 😆😆😆😆. I saw the list you have for us to spend less than $1000. So far I have spent 500. So I am doing good thanks to you.

[@luvmyotis]

I really enjoy watching your videos they’re always very informative and useful to me. I like how you explain things that are easy to understand. You have a such great personality and you’re fun to watch too and you always have my full attention the whole time just like this very helpful video. Thank you for sharing

[@jannevaatainen]

Torx (star) has been a stardard in Finland for years now for almost every screwtype. Drywall screw is an expection for some reason.

[@Ivarposthumus]

The Philips flat head was designed to be aerodynamic when building planes (that could go faster/caused less turbulence than protruding screws). A Philips head can't overtighten as much, since the driver will pop out. This is by design, for the reason they didn't want to damage the aircraft. This trait is also good for other materials, such as a drywall. I love Pozi and Torx even more, but I wouldn't want a pozi or torx dry wall screw.

[@jimstanley_49]

@@Ivarposthumus Yeah, some drywall "guns" have fancy clutch mechanisms to prevent overdriving the screw, but you can get a really simple self-stopping bit for when you aren't a drywall contractor. It's a Philips with a collar that will stop forward motion when it comes to the drywall. As the bit continues to drive the screw the screw pulls away from the bit and the camming action pushes the driver away with a perfectly sunk screw.

[@KevinSolem]

Same in Norway. Torx is standard. We use essve screws in our company.

[@KevinSolem]

And we are using long bits on our screwmachines (hilti). Then the bit will not fall off and it's better to use in tight corners

[@Peter-200]

I just watched a 13 minute video about screws...

[@ZiggZagg11]

and now I want to rush out and buy a box of high tech screws... 🤔

[@HappyfoxBiz]

ziggzagg, make sure they are bluetooth enabled, they can tell you if they are properly seated depending on your use.

[@jamil3286]

No ragrets

[@fundemort]

You're screwed.

[@georgevena6744]

my immediate thought on clicking this video was "who makes a 13 minute video on screws" and then i saw your comment and realized my whole life is a lie...

[@edrod2188]

Steve thank you, your tips are great, beginners like me find the info very useful. Don't stop!

[@TK-zf7sx]

This was a great overview. I kept thinking that there's a wood shop teacher somewhere who's going to make this an assigned viewing for homework. It covers the basics well, but doesn't hammer the point home.

[@Hackvlog]

Very detailed and thorough video! When it comes to screws, I've had two life changing discoveries. First one was finding out that some "Phillips screws" aren't actually Phillips screws, but Pozidriv instead. Using Pozidriv (PZ) bits for Pozidriv screws and Phillips (PH) bits for Phillips screws helps a lot. Seconds one was the Torx screw. Oh boy! I don't remember what I was making, but I do remember the feeling when I noticed how great Torx screws are!

[@Dogeek]

Torx is the way to go now, why use any other drive, when torx has all the pros and no cons ?

[@ComandanteJ]

In fact, pozis are EXCELLENT when driven with a proper pozi driver. They almost never cam out and accept a little more angle to be driven at (whereas Torx angle is mostly fixed). Dont mean to bash on torx, they are my prefered system, but pozis can be really good in tight spaces.

[@jakemauger8377]

There's another one that looks just like Phillips but the taper angles are a little different. This is called JIS for Japanese Industrial Standard. Most of the stuff that comes out of Asia now is using this fastener and a Phillips head just doesn't get a good bite on it at all. If you're having this issue, it's well worth investing in some JIS drivers.

[@chrislizon7483]

Yep, i didn't know this until I was working on a Mukini carburetor. They're easy to damage too.

[@afonsoferreira5171]

@@Dogeek I think the reason why PH PZ and flatheads are still used is because one screwdriver fits almost every size, while Torx need an exact size driver.

[@AswadG]

Wow after 13 minutes I finally know how to “Screw It”. Subscribed! 😀

[@jonathanallende9739]

Can’t believe how much i needed to see this video. Thank God i randomly came across it!

[@marioarvizu7077]

Beautiful videos! Full of information and excellent production. Thanks!

[@TimBuckMichael]

Nailed it! Great video Steve. For the basic intents and purposes I tend to agree with your distinction between bolts and screws.

[@RizKrispin]

LOL "Nailed it." Love the pun. At least he didn't... SCREW up!

[@johannes5219]

RizKrispin haha! :D

[@TimBuckMichael]

I'm glad someone caught it lol. I too am thankful that he didn't "SCREW up!"

[@LowReedExpert1]

Hey, Ace employee here (recognized that fastener section in an instant lol) and man was this video fantastic to learn from. The big the big that resonated with me is the difference between hardware and Home stores, because our boss makes sure that we either have some solid knowledge on something or know exactly who to call on shift who knows what they're doing. End of the day, a lot of us are retail people, not hardware experts but any decent hardware store isn't going to keep an employee who won't learn and who isn't actively trying to learn. They're just making the customer's life harder and wasting everyone's time.

[@DaraHijazi]

Thanks Steve, the video is soooo helpful, since I am a newbie in the woodwork, and I need all the information from A to Z

[@PadmaDorjee]

I love your clean and Si.ple explanations. I am inspired to get into woodworking because of you videos, thank you. Subscribed!

[@beccahoo]

I finally know how to sort all the screws in my toolbox and which ones can be tossed!!

[@SaintCronch]

I've been looking forward to this

[@davidlanyon6163]

Recently found your channel and we are watching through your videos. I took your advice and got the star head screw to use in my current build (work bench). I am a convert! The starbit screws go in so easy and don't spin out like the phillips head screws. Thank you for the information.

[@ericproulx4615]

I work in the building supply and hardware business and I say not only areyour videos informative but a easy for a newbie or training. Well done.

[@TRX450RVlogger]

Slot head screws need to be illegal!

[@PlasmaPod]

I see a petition forming

[@rotam8680]

They are awesome for strength in the head. You can reef on them and if you strip a head on any screw you can grind a flat head into them

[@American-Plague]

TRX VLOGGER TOTALLY AGREE! Who the f*ck thinks it's a good idea to continue making them? In my opinion EVERY screw should be made star drive. Then you'd only need about 5 commonly used sizes of star bit drivers for everything, as opposed to the canvas bag I have with seriously a hundred driver bits (2 or 3 each of like 40 different driver bits: flat heads, star drive, Phillips, hex head concave, hex head conVEX, square drive...Then 5 sizes for each one). It's ridiculous.

[@rpm297]

Show me that petition and i will totally sign it!

[@y.z.6517]

If you don't like them, just don't use them. We should give people the freedom to use whatever they want that is not dangerous. I will give you 2 examples of use: 1) Everytime my screw head wears, I can Dremel a slot so that I can use it again. 2) Another case is when you use screw inside a hole, so there is no chance that screw driver will slip away. And slot headed screws last very long. Also, they're cheap to manufacture. If you produce 1 million products per year with 10 screws each, with automated machines, that absolutely matters.

[@minnesnowtan9970]

I am SO glad that my investment in GRK and Spax screws looks like a good one. I also prefer the Star/Torx drive, so now I am validated by an expert. Since I am validated, can I get free parking? I guess your humor is better than mine too. Thank you for the screw video, you nailed it but with a twist.Fasten-ating!

[@daredevilskydiver]

I spend the last one hour looking for a good video which explains in a nut shell on screws(these common items). It was a very good video which explained all points. Tx

[@1978Caceres]

Thank you! This was thorough but to the point and very clear.

[@816bigbear]

I just picked up a box of Spax today. Changed my life!

[@mattfrownfelter558]

I used grk screws to hang my cabinets and they were great. I also used them to build my workbenches and my house is essentially held together by them. Never used spax but I’ll have to give them a try. T25s saved my life.

[@kevino1489]

Ok

[@Cefaroks]

The slot head section looks like a “seen on TV” commercial - “There’s got to be a better way!!”

[@katandpapa]

Awesome video! I'm a retired electrician, 40 years... but I'm falling in love with woodworking! I feel like a 1st year apprentice and that's just fine. I really enjoyed this video, great info! BE SAFE, GOD BLESS!🇺🇲🙏❤

[@ZalinaW]

I loved this video. Thank you! I look forward to making my first box project and eventually make my own bed frame. 🙂

[@probablynotabigtoe9407]

Been using star/torx exclusively for years now... never looking back

[@FourDollaRacing]

What do you want? A cookie?

[@Fanaz10]

@@FourDollaRacing give him two, he knows what hes doing

[@dadgumit2505]

It's a bolt! No, it's a screw! No, it's a--- microjig maker of the GRRRiper

[@RizKrispin]

LOL! I actually want to see this. Is there such a thing as WWMM fan fic? Are we all Microjig promoters now?

[@toysoldier46552]

hahaha nice!

[@baddoggie101]

The fastener section of that hardware store was the most complete and organized I have ever seen.

[@candiceramsayer5034]

I am very obsessed with wood working and this channel gives me... well.......................... great, awesome, and fascinating tips. If I had not found out about this channel, I would be in misery.

[@ex0stasis72]

What's the point of machine screws. They have no point. I'll see myself out now.

[@nolansprojects2840]

EX0stasis damn, you got me there

[@worldofwisdom617]

They seem to be used in metal components, i see them alot in electronic devices. Like in a computer itll have a designated hole and itll hold the motherboard and other things in place, usually small af and get lost in a blink of an eye.

[@ex0stasis72]

@@worldofwisdom617 **whoosh** My comment was a joke, but thanks for trying to be helpful with a thoughtful answer. :D

[@ex0stasis72]

@@worldofwisdom617 In case English is your second language, the part that makes it a joke is the double meaning of the word "point". Point could mean "a sharp tip" or it could mean "purpose."

[@TheKiUrrr]

Used for machines maybe?

[@keithb4007]

Your wife is a lucky lady...you are clearly an expert on screwing. Great video! Very good insight and info.

[@chelin7023]

Best video ever! Takes away the confusion and intimidation of the screw aisle. 💚

[@Fosterjld]

So I finally broke down and tried some SPAX screws. After getting over the idea of using .04 per piece screw I bought a box. Steve you were right. They are without doubt the best screws I have ever used in my wood working. I have always used drywall screws for all the reasons you mentioned and have had they snap off from time to time. I will not be going back to drywall screws again. Thanks for the great advice..!

[@gilltim5711]

Excellent presentation, Steve. I've always wondered about the different types of screws, and this explained everything I needed to know. Thanks for posting.

[@bing2010able]

looks like i got drywall screw, no wonder everytime i screw it in the head often broke

[@akpane3]

Thank you sir for a great video. I was looking for a video that explained all this. You gave me everything and I needed

[@tro8191]

Steve I always thought Phillips head was the way to go until I watched your video! Omg start drive screws rock!!!! Did a huge garage build the past few days and LOVED EM! I’m sold! Thanks for the advise!!!!