I've been watching videos like this for about 7 years. I think I might be ready to start woodworking lol
@matthewb38534 жыл бұрын
Don't fall into that trap. That's what my friend did and he doesn't have enough time to watch youtube videos about woodworking anymore :( haha
@fatimaqassim44904 жыл бұрын
What are you waiting for!
@asimjill22064 жыл бұрын
Lol
@simonbaker62334 жыл бұрын
I just started. Really loving it
@sandramatos64094 жыл бұрын
billiondollardan Check out Ana White’s videos.
@InfiniteCraftsman5 жыл бұрын
YOURE an essential power tool...🤣 no really, you’re essential to this community. Thanks!
@arbitrarystuff12295 жыл бұрын
you also called him a tool
@spoderman155 жыл бұрын
@@arbitrarystuff1229 but an _essential_ tool ;)
@InfiniteCraftsman5 жыл бұрын
Spoder Man gets it😜
@mordechaihellinger63524 жыл бұрын
I couldn't agree more!
@frankchen42294 жыл бұрын
@@spoderman15 an essential POWER tool
@danieltarcho93245 жыл бұрын
Diction apologize for my writing, I do not even speak English, I write the following message by google translator. Excellent your explanation; encourages me to continue.
@chrisgooi5 жыл бұрын
All the best good luck
@69elchupacabra694 жыл бұрын
lol that disclaimer was longer than the actual message
@RoomFourError5 жыл бұрын
Thank God my wife didn't watch this video with me. It would have killed my excuses for more tools. Thanks Steve, it was a useful video.
@jamesanthony84385 жыл бұрын
Quick! Delete it from your internet history, too! =)
@RoomFourError5 жыл бұрын
@@jamesanthony8438 👍
@Scorakos75 жыл бұрын
the hardwear store is a toy store for men /fact !
@syafaz98055 жыл бұрын
LMAO!
@iltoni68955 жыл бұрын
Does your wife control how you use YOUR money? What a pathetic existence
@kathyrosier55855 жыл бұрын
Lol, "workshops that are the size of aircraft hangars." So true! Thank you so much for catering to us mere mortals!!
@bs8385 жыл бұрын
So true. And they're usually the ones trying to act like what they made is so simple and accessible, that anyone should be able to do it! No names, but you know who you are. They're probably too good to be subscribed to Steve Ramsey anyway...
@craigbainum49675 жыл бұрын
Notgonnalie--if I could have a shop the size of a aircraft hanger, I would. I am a power tool freak. 'course right now I would settle for more power in my garage, so I don't blow fuses when I have too much going on.
@pabloata47085 жыл бұрын
@@bs838 April Wilkerson...
@niwty5 жыл бұрын
Pablo Ata so true. All that space to make pocket holes and French cleats in! 🤪
@hwood97835 жыл бұрын
@@craigbainum4967 How many power tools can you use simaltaneously.
@SteveRamsey5 жыл бұрын
It's easy to get discouraged thinking that woodworking is too expensive to try. Let's break this impression! If you've been at this for a while, please leave your tips for ways that new woodworkers can save money when getting started. BTW, it's been a while since I mentioned my Instagram...please follow me here: instagram.com/steveramsey_wwmm/
@stathisbikos65635 жыл бұрын
One tip, I would say, Is: Don't get super cheap jigsaw blades. The might seem like a savings but they are very very annoying to work with, they chip out like crazy, they heat up quickly and they can sometimes break in the cut especially if you are new and trying to push them too hard, they end up being false economy. I'm not saying buying super expensive blades, just not cheapo stuff. A good base model name brand like a T111C for straight and T119BO for angle cuts would be very good and last long. I'm personally a fan of the t234X as it's a good combination of speed and low chipout and will last many many miles of cuts. Also, I personally never bother with orbital motion in jigsaws. I don't think it's worth the extra money. And the time you gain by the speed advantage you end up losing with sanding the terrible edge they make anyway.
@ximono5 жыл бұрын
A (gently) used quality tool can be a lot better than a cheap brand new tool. For instance, you may be able to pick up a used but excellent Makita belt sander that was built in England for the same price as a new but mediocre belt sander made of Chinesium. Try it before you buy it, would be my advice. At least if you're not convinced that the previous owner has taken good care of it.
@tinyturbo3175 жыл бұрын
My wife and I have a tiny business. . For the first year of cutting I was using only a jigsaw. .lol. . Then I seen ur videos and have expanded to an ugly table saw about 60 bucks and mitersaw about 30 bucks...it's been 3 years now and have been pretty lucky to get away with only using these tools . The table saw by the way is small. . Thanks for the videos dude
@MaydaysCustomWoodworks5 жыл бұрын
Hey Steve. I'm a pro self employed cabinet and furniture maker. I have about 12 years of experience. When I started woodworking i watched people like the wood whisperer and other great craftsman who had tens of thousands of dollars in tools and i thought I needed the same to be able to make great products. I even acquired some debt to purchase tools i thought I needed for some jobs in the past. I absolutely love your videos man. They remind me of Bob Ross's painting videos. You explain things from the perspecrive that woodworking is for everyone and doesn't require a ton of money to do. I am a huge advocate now of making your own tools and buying the least quality/priced tool that can serve you appropriately. Now with that said, because this is my job I do now own a lot of laguna, Festool, and Makita tools... But only because they get the work done fractionally faster and I can put more wear on the tools without them breaking. I can do the exact same quality work with black and decker and Ryobi tools. And in most cases, people would be wise to purchase a lesser brand tool to be able to purchase more materials, and a variety of tools that will suit them instead of getting hung up on these crazy tools that they see others using. Keep up the good work man
@gordonchapman2225 жыл бұрын
@Michael McDonald I also love watching Steve's informative, no bull sh|t woodworking advice and build videos for beginners, but this comment is for you. I am not a pro, a cabinet builder like yourself, I have no experience at all in woodworking. But when I retire soon I hope to use a large lump of my pension to finance and build a shop in my garage. At the moment I am researching and costing the tools I need to buy. I enjoyed reading your comment above, but more than that I have cut and pasted the third paragraph into my research notes as fantastic advice. Thanks for taking the time to comment and sharing your experience to help others. I am now your 110th sub 😊👍
@JWMCMLXXX5 жыл бұрын
Well said
@DaCake25 жыл бұрын
Hi Mayday, you sound very knowledgable. Im actually having the same issue and Im trying to find out how powerful of a table saw I actually need. I did so much research and I know they have all types from cabinet to hybrid, but which one would you say is good enough for a beginner. Im looking to make home furniture like tables and all my workshop benches and table tops, etc. Thanks!
@Kewonerdk4 жыл бұрын
Bullshit!!!! I have been woodworking for 25 years now, and refuses to use “Home Depot” brands, they are sloppy, extremely hard to get proper set up. And extremely unreliable when it comes to keeping the tool true! And yes if you have a lot of experience to set up tools correctly, then go for it. But if not keep clear of especially cheap cutting tools.
@Kewonerdk4 жыл бұрын
Abserd O titanium hammers are for bitches, who don’t know to drive in nails!!! And of course those backwards countries that still uses nails for construction!
@relentlesschaos954 жыл бұрын
The expert circle: Dave Ramsey: Finance Gordon Ramsey: cooking Steve Ramsey: Woodworking
@synovia4214 жыл бұрын
relentlesschaos95 I noticed that also lol
@hameedullahjasat25604 жыл бұрын
Are they related
@SnipSnapDragon244 жыл бұрын
Those skillful Ramsey boys.
@allwoundup35744 жыл бұрын
ah yes, Dave Ramsey, the financial genius who filed for bankruptcy because he was a million dollars in debt. "Buy my book to learn how to save money!"
@katgum4 жыл бұрын
@@allwoundup3574 If I'm correct, that was about 30 years ago, and he made his millions years later. Unless there's another bankruptcy I don't know about. Which if there is, when was it?
@splifsis255 жыл бұрын
I wish a table saw was an option for me. I live in an apt and have to drag everything out to the patio to wood work. One day I'll own a house. In the mean time I'll keep learning
@iamjustaservant82184 жыл бұрын
me too
@mariusweber75564 жыл бұрын
same... but one day it'll all change :)
@davidcrocombe13224 жыл бұрын
I have a Triton saw table that has foldable legs. Helps in packing away.
@c.c.s61774 жыл бұрын
Tracks saws are getting cheaper and cheaper! You can pick up the new Dewalt for the same price as a their table saw. Make your own parallel guides and you will be all set.
@JasonHoningford5 жыл бұрын
You're the first youtube woodworker who isn't standing in front of 50 hand planers!
@GeddyRC4 жыл бұрын
Jason Honingford wait you’re telling me you don’t need 50 hand planers!?
He neglected a router to me it's my best I have a table saw my circular saw is idle.
@evethompson82645 жыл бұрын
I would have to add a shop vac to this list. I never use my random orbital sander without my shop vac. I think it is just as important as a good sander. Otherwise I totally agree with your list and I love your videos.
@kkarllwt4 жыл бұрын
Shop vacs are easy to build. Get air filters from a garage that works on older pickups and wash them out. Rinse them, then and spin them in the washing machine. Over the agitator, just spin! Stack up 2 ,or, more. Repurpose almost any vacuum motor.
@niq8722 жыл бұрын
@@kkarllwt also theres plenty of videos that show how to make the cyclone style vacuums
@volatilesky5 жыл бұрын
My main tip - garage sales. For your first tools, just got garage sales. You can get stuff for a dollar or less if it takes some restoring, and you learn how your tools to together, how to repair/replace parts, and make new parts. I have about 5 hand planes from 1920-1960, that are totally solid and only needed surface rust removal (with a wire wheel on a bench grinder which also came from garage sales) all of which cost me less than $20. And even if it's broken or needs parts - keep the project in mind as you sure stuff up for useable parts to fix your other tools. Or you can go max out a couple credit cards on brand new tools you probably don't need. But i feel a bit proud that i can look at my work bench and know that all the tools there, are things I've restored or made myself. I would honestly only consider a new table saw as the only thing to get new - but then again, of an old table saw has a true top, they can often have the motor easily replaced.
@treyedwards5725 жыл бұрын
If I could make a recommendation, it would be a project that using as many table saw techniques as possible, and to do it very beginner friendly. Something that someone brand new could follow along and build something, while learning the different ways to use their table saw.
@timothyfahlen27365 жыл бұрын
Hey Steve, I want to send a quick thanks. I just built a king size bed frame out of African mahogany and your videos were my primary teacher. Your pocket hole video, gluing and sanding vids, and general tips sprinkled throughout all your projects have been invaluable. Thank you SO much!!
@XAGR-hn3qt5 жыл бұрын
Once I buy one type of saw my wife will start to question why I’m buying more saws 😑she won’t understand 😅 trust me
@diego8985 жыл бұрын
Hey Steve - I'm in your beginner's woodworking class, and have bought these tools (specifically the ones you recommended in your PDF). Myself and others have noted that the Ryobi miter saw and circular saw do *not* come properly calibrated out of the box! Could you please make a video explaining how to get them reasonably calibrated? Thanks!
@artguti15514 жыл бұрын
If you are doing exact cutting...read your manual for calibration. If you are doing out door work...then it shouldn't be a problem.
@roadweary52525 жыл бұрын
I love that, despite your success, that you remain in your garage shop and respect you for keeping it real. Thanks as always, Steve!
@trevorhall95245 жыл бұрын
Paul Sellers has to be the best with hand tools, even if no interest, take a look, very clever man. Won't take me away from Steve though, enjoy them both
@SteveRamsey5 жыл бұрын
Great recommendation. He's amazing!
@cjhification5 жыл бұрын
Was just about to say Paul Sellers is the person to watch if hand tools interest you.
@daw1625 жыл бұрын
Paul is OK. He's a career joiner and a good intro to using hand tools. There are elite workers who used hand tools only to do some exceptional work - a far different class, and they're accessible and will talk on the phone (without compensation) if you're seriously into the hobby. Search "colonial williamsburg harpsichord maker". The master in the shop (george wilson) is still around, and I talk to him regularly. Doesn't make me any good as a woodworker, but he has the best eye of anyone I've ever met, and an instant suggestion any time I've not liked the way something looks.
@olderendirt5 жыл бұрын
I don't know why I read that as Peter Sellers, but that gave me visions of Inspector Clouseau and almost gave me heart failure. Ha ha ha!
@markbryan99895 жыл бұрын
Also Andy Rawls
@TheNotedAnatomist4 жыл бұрын
Thanks so much ... this was very helpful
@peterbrownwastaken5 жыл бұрын
Curves with a circular saw? That sounds crazy dangerous.
@1pcfred5 жыл бұрын
I have a Triad blade for a circular saw. I still haven't used it yet. They say it'll cut a circle though.
@danielleanderson63712 жыл бұрын
@SilentDiablo Worth it, though, if you actually bother to get counseling beforehand.
@danielleanderson63712 жыл бұрын
@SilentDiablo It pains me to know there are people out there who have been tricked into thinking marriage is this awful, soul-sucking thing. I say this as someone whose mother has been through two-and-a-half divorces.
@danielleanderson63712 жыл бұрын
@SilentDiablo It helps the odds of that gamble if you marry someone who you actually like who also likes you back.
@pocket83squared5 жыл бұрын
My shop is big enough to fit *2/3 of a blue whale* inside of it! Jealous? Don't be. My first shop (in my first apartment) was a 3x5 closet. There was a bucket to sit on, and a piece of acrylic glass for a workbench. It was filled to the ceiling with my junky tools, and you wouldn't believe what I made in there. Deal with what you've got! Besides, a hangar is mostly useless anyhow. 20'x20' is pretty much a dream shop, imo. Happy Friday, Steve ;)
@JDeWittDIY5 жыл бұрын
And a wild pocket appeared!
@JusBidniss5 жыл бұрын
What did you do with the other 1/3 of the whale?
@pocket83squared5 жыл бұрын
Tarp.
@1pcfred5 жыл бұрын
A big shop just means you have to walk further in it which gets you more tired.
@dylankerr45115 жыл бұрын
Hey Steve, I just wanted to suggest something that I have noticed with your videos. I have been going through the catalogue to watch videos that I am interested in, however when I get to your Basics videos, who's thumbnail has a red border, I can't tell if I have already watched it or not since the red watched bar blends in to the thumbnail. I realize that it is a small thing, it would just be a little more convenient if the colour of those borders could possibly be changed a bit. You make great videos, and I've been having good fun in the shop building things lately, so thanks!
@nomifrog4 жыл бұрын
Just discovered this channel in 2020, ive always been interested in woodwork but always felt it was an expensive hobby! Thanks for making these sorts of videos filled with great advice!
@michaelkelly33565 жыл бұрын
If space is an issue a track saw can do most (not all) of the work a table saw can. Love your videos
@mortonsfarm6525 жыл бұрын
Good breakdown! I definitely agree with the tools that made the list. Only one I would add is a palm router/router. Use that more than the jig saw but I guess we all have our preferences.
@pickledparsleyparty5 жыл бұрын
I find a router to be essential. I would swap out the jigsaw and swap in a router on this list. Cutting rabbets and chamfers is so smooth with a router. And adding a table lets you joint the edges of 1-inch boards so easily.
@TonyBullard5 жыл бұрын
Agreed. Even just being able give things a roundover makes my projects look so much nicer than poorly sanded edges. And, of course, there's tons of other uses!
@mofared5 жыл бұрын
miter saw 1:55 Circular saw 2:40 Jigsaw 3:11 Table saw 4:06 Drill and Driver 5:14 Random orbit sander 6:04
@felliesweetie4 жыл бұрын
I am terrified of table saws!!
@frostsmaker89664 жыл бұрын
@@felliesweetie yeah, it is dangerous. it is good but dangerous. when I do woodworking, I could make a mistake or two. I'm human and there will be a time where I make a mistake. That's why I won't use table saws. I want some other tools which are friendly to use.
@alwaysplaythegame3 жыл бұрын
You can either pony up big time for a saw stop model or get a cheap track saw. Technically a circular saw plus guide works the same as a track saw but consider that a track saw setup is about 2x setup time as table saw, and circular saw is about 3x setup time.
@bretwhitten7038 Жыл бұрын
@@alwaysplaythegame i’m not getting a table saw until i can afford a sawstop, it’s simply not worth the risk for me
@TheIntern835 жыл бұрын
Good info and congrats on 1MILLION subscribers!!!!
@mammothfilms5 жыл бұрын
I’m fairly new to woodworking and started with a second hand non-sliding miter saw. I upgraded to a sliding Kobalt about a year ago and the slider is a major timesaver. I’d recommend laying out the extra funds for a sliding miter.
@johnvesperman15303 жыл бұрын
The slide on my 10" miter saw is an essential thing. Cutting a board wider than 5 or 6" without the slide means some artful flipping of a mostly-cut board.
@adamlaski91285 жыл бұрын
People love to crap on Ryobi but you know what? They were the first battery powered tools I bought years ago and every one still works. They’re not the most precise, powerful, or pretty but they do the job for a fraction of a cost the big boys will run you. And as a working carpenter, I still pick them up from time to time. Most recently a belt & disc sander that was cheaper than filling my truck up
@Zombiereaper15 жыл бұрын
I have a Ryobi corded drill I bought like 7 years ago, I've beat the crap out of it, and it's still kicking.
@thecluckingassassin5 жыл бұрын
Ive had my ryobi disc sander for about 12 years and still going.
@nathanjxaxson5 жыл бұрын
I would say the same thing about my green Worx cordless drill & driver. They aren't ever going to rival Bosch or Makita - but they were 2/3 the price and are still trucking after years of heavy use against heavy solid oak. Some times you aren't settling for "good enough" - many affordable tools are actually "great enough."
@1pcfred5 жыл бұрын
I have a couple Ryobi tools. They suck. They're not cordless though. I wouldn't even say they do the job either. But they're the older blue line they used to make. I think Ryobi may have improved some? Still, with the experience I've had with their crap I'll never know.
@jimbo26295 жыл бұрын
The latest Ryobi one + tools are the bees knees.
@asifchangazi90255 жыл бұрын
Absolutely at right time you made this video for me, I really needed this list of power tools as I am going to start my wood work shop. I have been thinking forva week what sort of power tool should I buy, I mean the most essential one, you made it very easy for me, thanks alot for this video.
@SouthpawDavey5 жыл бұрын
Glad to see you do more regular vids on youtube. Dave
@Mixwell19835 жыл бұрын
For what they are, if you're on a budget get walmarts brand hypertough random orbit sander and jigsaw. Both can be had for a little over $30. Whatever saw you get though a good blade will only enhance it so dont go cheap on the blades.
@natemendoza16165 жыл бұрын
Literally were my first tools
@jakepollard99964 жыл бұрын
I'm fairly new to all this, why do you need a miter saw if you also have a table saw?
@oslogutt805 жыл бұрын
Great content as always Steve!! Greetings from Norway
@cdjhyoung4 жыл бұрын
I would like to nominate one more essential power tool: a pneumatic nail driver. This can be a finish nail gun, pin driver or power stapler. All make your shop work go faster and create more stable joints as you do your glue ups.
@gerrymiller45235 жыл бұрын
Very good video! I like quick, concise and practical videos and you hit all the marks. Thank you.
@MrSirbra8 ай бұрын
To add to the table saw, I bought a $270 ryobi table saw and only after a few months felt I made bad purchase because all the jigs and sleds I wanted to make require 2 miter channels. My table saw only has 1. I could, if I wanted, disassemble the cord holder, but it's something that might make it easier on beginners if they know having 2 miter channels is better than 1. You don't know what you don't know.
@stzo15 жыл бұрын
Another great video! But I would like to see from you Steave, a video about protection. And I mean what your experience suggests for issues like dust mask, headphones, googles, vaccum system etc.
@fermitupoupon17545 жыл бұрын
€50 buys you a full set of PPE from 3M Peltor. 35dB earmuffs, half face mask with cheap replaceable filters, and proper non-fogging goggles. Added bonus is that the 3M stuff is basically sold everywhere.
@markw35985 жыл бұрын
ALWAYS wear a condom!!!!!!!!!!! Wait,.. what? OH, Always use the appropriate safety gear when woodworking!!
@PilatomahawK4 жыл бұрын
sometimes I think about the woodworkers of the XVIII century and before industrial era. They oughted to be so precise, full of stamina and disciplinated, and with just very simple tools they got the work done and made truly art furniture. Very good advise for a southamerican woodworker, where powertools are even more expensive than in US or EU
@hectorcastillo17924 жыл бұрын
Imagine him telling you "Good job, champ" after he sees your finished project
@cherokeeproud95315 жыл бұрын
Could you do a video on your table router? I'm curious how it works and, where I could buy one. Thanks. P.S. You've opened my eyes to my new hobby.
@elfpimp15 жыл бұрын
I forgot to add, number 8, at least for me.. 😧 a First Aid Kit...
@MsKatVlogs4 жыл бұрын
nah just a roll of duct tap and shop towel is fine :D
@Kevin_geekgineering2 жыл бұрын
miter saw really? for a hobbyist? not essential unless you do lots of cuts everyday on thick lumber, which make you a professional not hobbyist, jigsaw or even handsaw will do the job very well
@DennisMathias5 жыл бұрын
Hey, you oughta do a show on clamps! Or maybe you did and I missed it.
@SteveRamsey5 жыл бұрын
Good idea!
@CementRoots5 жыл бұрын
@@SteveRamsey I refuse to pay the price for bessey parallel clamps, I would love to find some cheap clones,.... do these exist ?.... or is shop built the only option?
@thegreatgazoo5 жыл бұрын
@@CementRoots Same here - I see a lot of videos with them in and I do a lot of "frame" type projects so these seem to be the way to go, but dang they are expensive.
@JusBidniss5 жыл бұрын
My favorite (and least expensive) idea for when I run out of 'store bought' clamps, or need one longer than any I have, is the Izzy Swan approach using wedges. Cut a tapered wedge of appropriate thickness, rip as long a piece of plywood as you need (8 feet if you want), 3" wide, for the clamp body (or just use a 2x4), and 2 3"x3" blocks of wood, same thickness as the wedge. Screw one block to the end of the long piece, put your workpiece on top of the long piece up against that block, then put the other block and the wedge against the other side of the workpiece, with the wedge hanging halfway out, between the workpiece and the block. Screw down that block, then just tap in the wedge with a hammer until it's tight. You can easily with these scraps, generate more clamping force than the most expensive clamp you can buy, for pennies.
@mikecurtin98315 жыл бұрын
@@CementRoots If you're using F-style clamps, my experience with Harbor Freight has been very good. I don't recommend them for power or precision tools, but their hammers and clamps work very well and cost a fraction of the name brand ones.
@alis43814 жыл бұрын
What's the difference (in practical use) between a miter saw and a circular saw? Are both (absolutely) necessary for starters? Also a table saw - is that absolutely necessary? As a noob, I imagine there's a whole lot of overlap between these tools.
@TallmanMike4 жыл бұрын
Steve, I'm starting out in woodworking as a hobby and wondered - is it okay to skip the mitre saw and go straight to a table saw or should i learn the ropes on the mitre first? Also, is there a point where you're 'ready' for a table saw or have learned enough to warrant buying one or is it of benefit to buy the saw then learn as you go? Is there anything a mitre can do that a table can't? Thanks!
@matthewcaldwell58534 жыл бұрын
TallmanMike hey mike, my first wood working tool was a table saw. I took it out of the package, put it together in an hour, and started testing it out. If the idea of it is daunting, you may be overthinking it. Go and look at some table saws within your budget and buy one! You will be just fine
@Dwayne_Bearup4 жыл бұрын
A table saw can make all the same cuts as a miter saw, but it can also do something a miter saw can't, which is cut a sheet of ply in half or rip a long, wide board into several long, narrow boards. In short, if you can only afford one, get the table saw.
@larrystrayer83365 жыл бұрын
Very well presented,, brief to the point ; good information I think That the miter saw is my favorite especially if one is constructing a project using 2 x4. Not having to square up a cut is priceless. Lol.
@PacesIII5 жыл бұрын
If you can make quality stuff with cheap tools, you'll appreciate expensive tools once you can afford them. And, you'll have more time to figure out what expensive tools you'll eventually need.
@jamesanthony84385 жыл бұрын
I use the table saw more than any other saw in my workshop, followed closely by my hack saw and Dremel (with cutting blades). I don't know why, but it's just quicker and easier for me to cut out areas on the necks of my cigarbox guitars using my grandfather's old table saw. I guess it's one of those "dance with the one what brung ya'" things. =)
@NJEsperantist5 жыл бұрын
Steve Ramsey: making woodworking accessible since 2008!
@SteveRamsey5 жыл бұрын
Hey Dave! Thanks.
@christofix5 жыл бұрын
In my workshop i have a few basic tools and i'm planning to make others, like a bandsaw for example, myself! I think it will be fun and saving money the same time!
@SuperDavidBrothers5 жыл бұрын
Wow this was really helpful Steve, thanks for letting me know. I thought a Table Saw was super duper expensive all because of how massive it is!! 🤯🤯
@Al-fl1gq5 жыл бұрын
Most of the workshops that are over 100K in toolsare on PBS shows. I am very limited in space and so I make everything mobile and can wheel everything I need to where I need it.
Lol...what, the times I listed are one second off?
@mintybadger8415 жыл бұрын
Steve Ramsey - Woodworking for Mere Mortals yep, but I think we all forgive you
@roadweary52525 жыл бұрын
I forgave him without having to comment about how his times are off
@mintybadger8415 жыл бұрын
Boston_guy 617 wow bravo you, I hope you feel better than everyone else
@ikhal3d3 жыл бұрын
I'm surprised that Steve hasn't recommended a dust extrator, or even an air compressor that you can attach multiple woodworking cheap tools into.
@robertjones21385 жыл бұрын
Used tools, used tools and used tools. Steve’s suggestion is on the mark. If you’re not in a rush estate sales and auctions are a great source.
@1pcfred5 жыл бұрын
Used tools can be a bargain if you know what you're looking for, or at. Unfortunately that is not the position beginners find themselves in.
@briancarter15975 жыл бұрын
My workshop can fit a full size airplane in it. A full size toy airplane. It barely fits.
@cardsfanbj5 жыл бұрын
Pawn shops are another good source of used tools. I got my RO sander $20 cheaper than new and a recip saw for less than half the price of a new one.
@rabbytca5 жыл бұрын
Pawn shops in my area are notoriously hit and miss. Saws and air compressors that were more expensive than brand new retail and professional items that scream stolen or hidden damage. I've found estate sales are the most reliable source of quality used tools. Just know your prices before hand and don't exceed what you are willing to pay (be willing to walk away).
@buskirk502 жыл бұрын
one tool i would add on is a multi tool. can be used for so much with wood working and other projects around the house
@stathisbikos65635 жыл бұрын
5:44 That is incorrect. Impact drivers are not hammer drills. They do not have any axial action, hammering or otherwise. What impacts do is deliver torsional hammering blows by accelerating a mass in a rotational motion with the motor and then suddenly engaging it on the "anvil", which it the part that accepts the bit, so that it hammers it in the same rotational fashion. Thus the inertia of the rotating mass translates into torque on the bolt. This is done so that the driver can deliver torque to the bolt without the user having to apply that torque to the tool to keep it from spinning. Otherwise, if you attempted to use a 140nm non-impact driver it would just twist your arm (this is why non-impact drivers never exceed the low 40nm range. There would be absolutely no point for the to go any higher). Another reason for the impact action that doesn't really apply to woodworking is that due to the fact that impacts deliver fast blows to the anvil, the tool can tighten bolts onto parts that are not restricted from moving (for example a lug not on a wheel that in not held by a brake/the ground) by using the part's inertia to provide enough "holding force" for lack if a better term. This off course works better the heavier the part is. Love your channel. Keep it up :)
@briancarter15975 жыл бұрын
That's what he said. He just said it differently than you.
@stathisbikos65635 жыл бұрын
@@briancarter1597 i take "tapping in the same direction you drive the screw in" to mean axially, thus the correction. If indeed this is not what he meant then the comment still serves as clarification at least. :)
@arpie20815 жыл бұрын
There are a few drill drivers on the market these days which can exceed 40Nm by quite a bit I believe
@briancarter15975 жыл бұрын
@@stathisbikos6563 Um, no. He didn't say impact drivers are hammer drills. He said it taps in the same direction it drives the screw in. Rotation implies an axis. Your correction is itself incorrect.
@stathisbikos65635 жыл бұрын
@@arpie2081 oops! That was a brainfart. Offcourse they do, even my Gsr 18-2 can reach about 60 in low gear I believe. I meant low 100Nm (notice I wrote 140 for the impact having in mind a specific einhell tool I have worked with, my brain grabbed the wrong end of the deduction, sorry about that) Even then I admit you could argue there are twin handle tools like the M18 fuel than go even higher, but to be fair, 1, these are not meant for bolting down without the clutch engaged and 2, these aren't really the tool you would use to drive in screws in woodworking and 3, these can and will twist your wrist if you are not carefull (if you are stupid enough to use them single handed and have the clutch in drill mode... (that has never happened to me, honest :P ) Fair point though and I did fudge the number there. sorry, and thanks for pointing it out! My point is in the end though, impacts make high torques easier and safer for the user and that is mainly the reason to have one. in my opinion. :)
@Umairworkshop5 жыл бұрын
This is informative video for woodworking
@ximono5 жыл бұрын
I'm a European amateur woodworker and unlike my American brethren I don't own a table saw, and I don't plan to buy one either. Not because I'm European and therefore have to do everything differently, but for a couple of reasons. First, I don't have enough space in my narrow shop (more like a bike shed than an aircraft hangar). Second, I find them scary as f... and feel much much safer using this trio: track saw, miter saw and router. Those three tools can do most things (anything?) a table saw can and more, and they take up a lot less floor space. I do see the appeal of the table saw's versatility, but I'm perfectly fine with my setup and the fact that the saw blade points away from me. When the time comes that I need more versatility and a larger shop, I will hopefully be able to afford one of those Felder/Hammer beasts that make table saws look cute. Well, that's the dream anyway. Thanks for your inspiring attitude to woodworking, and for another good video! I always learn something new.
@philquinn735 жыл бұрын
European, get to know Paul Seller's
@ximono5 жыл бұрын
Philip Quinn: Oh yes, Paul Sellers was one of the first woodworkers I watched on KZbin. Looking back, I think he's the one who inspired me to pick up woodworking in the first place. I hope to do more "fine" woodworking with hand tools eventually, I really admire true craftsmen/artists like Sellers.
@IraRadchuk5 жыл бұрын
100% agree, for me router is essential and tablesaw is not at all (and is terribly scary even though I took a three-day course on using it). Fellow europian here tough, might be the reason, indeed :))
@rbij5 жыл бұрын
No space for a table saw here either. I work on a 2.5x1.2 balcony... I use a circular saw and guide rail instead. Just takes more time to set up.
@ximono5 жыл бұрын
Roy Bijster You're right, setup takes longer with a track saw or router. I have to admit I'm a bit jealous of those who can just walk over to their table saw, adjust the blade and fence and start ripping. There's always a tradeoff.
@bruceeggleston60735 жыл бұрын
Steve, I've been a hobbyist Woodworking for about 40 years. I was never really did anything that was very complicated at all. Mostly refinishing antiques. When i was 20 years old, I bought a Solid walnut Waved drawer front with a hand beveled mirror and wooden casters and get this, i paid $5.00. I refinished it and was hooked. I want to tell you that I've learned so much from you. Of all of the thousands of people that make woodworking videos, I love yours more than anyone else I've seen. You have an awesome sense of humor and make it so much fun to watch while learning very important techniques and safety tips. Thank you so much for your videos.
@delphaneuxlacroix5 жыл бұрын
After watching this video, I want to see what a power clamp would look like. I'll bet it's amazing.
@Orxenhorf5 жыл бұрын
If you want to keep the tool for life, get a power cord. The battery WILL die and the manufacturer WILL stop making replacements.
@1pcfred5 жыл бұрын
You can rebuild battery packs. Unless the tool has a brain in it. Then you might be screwed if you can't circumvent that. I imagine BLDC tools could be that way?
@lshaffer19805 жыл бұрын
I cut my cord with my circular saw the first time I used it a couple days ago. This is not going too well. But I finished my coffee table.
@jimbo26295 жыл бұрын
Start getting battery tools.
@3lackIce4 жыл бұрын
I guess that means you get to learn how to fix cords now, I recommend solder and shrink wrap method, dont you dare just tape it up with electric tape.
@Moz1223334 жыл бұрын
Measure twice, cut (the wire) once.
@dusbus23844 жыл бұрын
I'd argue for a beginner it would be better to get a circular saw and router and rip fence (like kregg or bora) with a good blade and small router bit set before getting a table saw. For one table saws are the most dangerous tool in most people's shops and for two you can do anything with a CS and router that you can do with a TS. plus it is a better value and takes up a smaller footprint in your shop
@paulbridge30424 жыл бұрын
jon snow that’s kinda true about the circular saw but most beginners like myself have troubles cutting a straight line. Even bought a straight line jig that is more of pain to setup properly. People need to read the safety part in the manual and use push sticks.
@bradisscrat60375 жыл бұрын
I love the index! :)
@SteveRamsey5 жыл бұрын
Thanks!
@knpstrr4 жыл бұрын
Can't one get started with just a circular saw? Forgoing the mitre saw and table saw? I mean I would imagine a table saw and mitre make things far easier, but from a budget standpoint can these be skipped at first?
@artguti15514 жыл бұрын
Yes, but get a straight edge jig for long cuts ( like a Kreg rip cut) and a Speed Square
So glad I found this channel. My "workshop" is literally 2 saw horses and a jigsaw and a newly acquired RO sander. I started out with making a mold for a concrete project but now I'm interested in woodworking. Gotta find a better way to cut big pieces of wood! Thanks for all your info!!
@loganstout82575 жыл бұрын
Love your videos Steve, I would say though, that for someone just starting out, a battery powered circular saw might not be just the thing. Fairly big price jump from a basic corded model, often lesser power, and if its a hobbyist just getting started, dead or aged batteries just become a barrier to the work, when a simple corded version is often very cheap used, and when used gently, will often continue being quite functional long after the woodworker has either decided its not for them, or decided they love it, and invested in a few more tools. The only cordless tool I'd recommend to a starting woodworker is a drill/driver, as those tend to have very high general home and life utility.
@lordrichard81845 жыл бұрын
I think for most wood working projects you can really get by with a circular saw and a drill. Having a 2nd drill and/or driver is a nice luxury as it speeds you up a little cause you don’t have to fumble changing bits around. The circular saw is the king of saws for a reason. And with a couple of jigs (and maybe a few different types of blades) you could easily build a house (and it’s furnishings) using only that saw. Great video and info!!
@TheClaudos5 жыл бұрын
Thanks for adding the metric dimensions. So hard to understand imperial system you guys use in the U.S.
@wdr15 жыл бұрын
The US doesn’t use Imperial. We use a system called US Customary. There’s a Wikipedia page on the differences.
@1pcfred5 жыл бұрын
@@wdr1 yeah we beat the bloody British Imperialists.
@patagualianmostly74375 жыл бұрын
@@1pcfred Yeah, right.... Only for the US to become the NEW bloody Imperialists!....
@1pcfred5 жыл бұрын
@@patagualianmostly7437 how do you figure that? We have no colonies. We have a few territories but I wouldn't call it a global empire in the making. Whenever we conquer a really big country we give it back. That's not how imperialists operate.
@PrintingPerspective5 жыл бұрын
Well then, I need to stop making my woodworking projects, because I don't have/use table saw, ha ha! Cheers!
@gnarthdarkanen74645 жыл бұрын
You're not alone... Oddly enough, I have two table-saws, just rarely ever use either of them. (lolz) AND no, I'm not a "Neanderthal Purist" for the record... I do appreciate the hand-tool approach, particularly in precision/accuracy... but power-tools are (simply put) essential if you want to be productive. ;o)
@UlisesBarreraАй бұрын
Down to earth, clear, helpful, good vibe, new subscriber here.
@tuckera18795 жыл бұрын
I have some vid ideas for you, I am a 12yo woodworker and a run a medium sized business, your videos and my mentor really helped me to get into woodworking. I don't know if you already have a video on clamps and vises yet but I figured I would chime in some if my ideas, also a table saw safety video. Thanks from Minnesota!
@ayoyyoy5 жыл бұрын
Wow! 12, with a medium sized business. Good stuff. You should make some videos on your channel showing how you have built it up and what yoou do. Have you got a website for your business? I'm keen to see it!
@tuckera18795 жыл бұрын
@@ayoyyoy my mum won't let me make videos and I don't want to either as I can barely run a phone much less a camera, but that is ok as I document all my projects and things on a Facebook page my mum runs. It is Anderson Woodworx on Facebook (make sure you spell it with an X not a ks, it gets a lot of people)
@Cancun7714 жыл бұрын
The main advantage of a sliding 12" mitre saw is the cutting depth. So it's a good thing to have if you habitually use lots of fairly thick pieces of lumber, like 5x5 beams.
@mohamedfaroukbalouli78095 жыл бұрын
OK, i want to start a woodworking project (Making monitor stands, simple wooden bird cages, simple bird toys) which can earn me some extra $ every once in while, but the problem is i have 0 skills in woodworking and i can only afford buying a jigsaw, a grinder (sander) and a driller; what are the odds ?
@TallerSalvatoreJimeno5 жыл бұрын
Amigo gracias siempre es bueno recordar consectos recordar términos es interesante tu video gracias!!!
@JonAkdogan4 жыл бұрын
The problem is proper hand tools are not cheaper than the powered ones.
@Teshcbuk5 жыл бұрын
Power tools: Jigsaw, impact driver, drill and sander only for me. Rest are hand tools. I am not selling stuff.
5 жыл бұрын
I'm half way there. Still don't have miter saw, random orbital saw and table saw. Probably miter saw is on my priority list, but about table, I don't know, maybe little to dangerous.
@KipdoesStuff5 жыл бұрын
I rarely agree with these type of videos but I have to agree, this is pretty much dead on.
@HoneyHollowHomestead5 жыл бұрын
Well my jigsaw, miter saw, and sander were family hand me downs so no choice there, they are what they are. I did buy myself a table saw that is still in the box. Been waiting for the rain to stop here in Kentucky so I can set up my shop. It's been 6 months now.
@CarnivoreKipp3 жыл бұрын
Do you still recommend a 10 inch miter over the sliding? I'm looking into Ryobi and Dewalt.
@peterdebondt28234 жыл бұрын
Pretty sure we're missing a router.... Doesn't have to be big bit I can't remember one job were I didn't use it
@r1verman4 жыл бұрын
Great channel with great info. I just started watching and signed up for email. Looking forward to watching more videos.
@mikeandlucky5 жыл бұрын
Thanks as always for looking out for us folks who love woodworking but have to do it within our family budget :)
@pthover5 жыл бұрын
Just what I have always liked about your videos--common sense to woodworking!
@ArtisanPirate5 жыл бұрын
Awesome Video Steve ! How Many Pounds Of Sawdust Have You Made Over The Years :)
@selectedambientwood5 жыл бұрын
Where all my router people at?! Love ya steve... I'd nix jigsaw for a router personally
@alwaysplaythegame3 жыл бұрын
Yeah a palm router should probably be the next item on the list.
@danieltaylor83475 жыл бұрын
Once again you knocked it out of the park. I think your advice is right on the money. Thanks Again.
@TheMadnessOfCrowds5 жыл бұрын
Agreed, Never disappoints.
@Sandman600774 ай бұрын
The only thing I would disagree with is the miter saw. spend the extra $75-$100 and get the sliding miter saw. I started with a standard 10" miter saw and quickly realized that I was limited with what I could do. So then I was staring at my brand new miter saw think, well now I have to spend 3x more than what I planed and get a table saw also. My opinion is to spend the little extra to get the sliding miter saw.
@riceraama4 ай бұрын
Steve, Im just starting up with the wood work and the sole purpose is making toys for my little nugget. I'm starting with easy to build vehicles. Between band saw and scroll saw what would be your advice?
@Assorted125 жыл бұрын
Love the channel. Always happy to see when you post a new video. As far as power tools go, I'd add a router to that list. They can do the job of nearly every tool on your list (not as well). A super versatile tool.
@boggs48964 жыл бұрын
Your advice on orbital sanders is spot on. Unless it's absolutely necessary, NEVER get a battery operated one. I have one and compared to my cordless jigsaw and drill, the orbital sander eats up batteries like there's no tomorrow.
@larrydennis42715 жыл бұрын
Hi Steve, love your videos. I've spent 50 years trying to get into wood working. All my tools come from pawn shops, yard and estate sales. My shop looks like a 1950 Sears catalog. Now, I'm 92 and trying to get out of wood working. Oh, oh...have you ever thought of growing a salt and pepper beard, getting thick horned rim glasses and wearing plaid shirts?
@chrisgooi5 жыл бұрын
Wow..would love to see your antique tools. For sure you are an excellent craftsman.
@davec52704 жыл бұрын
So on most table saws I have looked at, including a few from dewalt, they specifically saw Dado blades cannot be used. Even the Rigid one says you cannot use adjustable ones. Any suggestions or have you used these without difficulty?