Pt.5 1JZ Tune Up | Precision 6262 for the 1JZ Datsun

[@damnitdang]

That's gonna spool fast. I have the same pte6262 .68ar in my 240z 2jz... daily driven super responsive. Great power band up to redline... spools good. No lag...

[@corsomike1]

Like it all so far with the exceptions that your leaving the cam gears open ( bad JuJu ) and that the header has no external support for all the turbo weight . it will crack over time without a doubt . ( food for thought )

[@theonlym12]

That 90 on the oil return is a little risky. You may want to consider going with a 45 instead.

[@Drew_P_Bahlz]

That turbo and manifold looks sick! Well done!

[@jpiersa240]

I have same plugs in my 1j, gapped to .22 with a 6262. Made 670.

[@damnitdang]

E85? Stock motor? How much boost? I've been looking around for more 6262 results

[@jpiersa240]

@@damnitdang E85, stock short block, 272 cams. 30 psi

[@damnitdang]

@@jpiersa240 damn stock block handles 30psi? Lol... I have a all stock 2jz gte non vvti... w/ pte 6262 .68ar... haven't ran in a year but I've been wanting to switch to e85. What was your .ar ?

[@ZgodaDrift]

What tool strap did you use without the stering pump?

[@jeffintoronto5712]

Engine is looking nice. Can you print out a vinyl (or other material) decal for the lettering? Not sure of the temp maximums but worth looking into.

[@MrPingpong90]

Engine looking beautiful! Great work! Could you do a rough estimate of how much the parts have cost you so far in a video?

[@StewartMotoring]

I try not to keep track anymore ;)

[@kingmarz3635]

That kind of manifold needs a support bracket or it will crack with the weight of the turbo!

[@olliebeattie757]

Hi mate! Your videos are helping me big time (1jz into e30), keep them coming. I've also bought a Mishimoto sandwich plate for my oil filter, what size adaptor did you use? M20 or m22? And where can i get that "bung" adaptor!? Thanks in advance

[@StewartMotoring]

Hey, the mishimoto sandwich plate I bought came with the adapter. So I don't know what size it was.

[@cautionontherun30]

Where did you get oil feed lines and drain lines part number please

[@jameshaslow4099]

Crome or gold for the lettering

[@blackdiamondgarage7972]

Are you going to get a clear cover for the cranks ?

[@StewartMotoring]

for the cams? no, not worried about debris dislodging the belt. its not going to be a daily car

[@timothymubichi2380]

0.28 are those rs watanabes?!

[@tristarO1]

Can this engine run twin turbo?

[@StewartMotoring]

sure, the 2jz came factory twin turbo

[@simlowsb]

How much it cost for the entire engine build?

[@StewartMotoring]

More than a spoon engine before race wars

[@simlowsb]

@@StewartMotoring err.. is that a lot? Sorry I don't know how much a spoon engine would cost?

[@ns_shadowf4i]

Whats a good turbo for a 1jz cause i been looking at HKS t51r and Garett or borg warners but they dont say if its compatible for a 1jz.

[@Marko-JZX100]

Leo Lewis Depends alot of your goals what you're trying to achieve. T51r? Seems like you need to research and learn a bit more before just guessing what turbo might suit for you. I have BorgWarner S363-sxe on my 1jz vvti, twinscroll T4 manifold, Turbosmart 45mm hypergate wg. My friend has also 1jz vvti, but with a Garrett GTX3576r gen2, vband inlet, fuse fabrication vband manifold and same 45mm turbosmart wastegate. My goals are around ~700whp and his about 650whp with very very wide powerband. Both our heads are ported and I'm running bc272 cams and he has bc264's. So yeah theres alot more to think about, other than just turbo when building engine.

[@ns_shadowf4i]

Marko Sandelin i know that. I was just asking. I plan to make a 5-600whp 1jz. But i just wanted to know some good turbos. But again like you said its all based on your goals.

[@Marko-JZX100]

Leo Lewis Cheers mate, was only trying to help out. 👍 For 5-600hp on 1j, a good compressor inducer size is anything between 58-63mm. Turbine wheel at least 62-64mm and you are good to go out and search different turbos depending on your budget. Journal bearing borgwarners and holsets are tried and proven choices. S362-sxe with a T4 twinscroll hotside 0.91ar would be my choice for good budget turbo that will support up to ~700hp. Even plain old Holset hx40 super will do 600 easily and spool fast with good manifold. My other friends 2j with hx40 super makes 664hp 1.9bar boost. 1bar at 3000rpm

[@jzshifter]

Marko Sandelin whats a good a/r size for quick spooling for those turbo sizes you recommended for a street driven car and would get you to the 500 whp ? I know there would be some lag with power levels of 500hp and up. I also had some of the same questions as leo that you answered already. This is something i've been thinking about for a while for a 1jz gte vvti as well.

[@damnitdang]

@@jzshifter did you ever get it running? What'd you go with?