Restoration BROKEN Eye & Repair CRACKED caterpillar Loader Boom Line boring | Machining, Welding,

[@Handleyman]

Love those safety sandals!

[@dawszelka5461]

Yea right lol ..

[@freddygarcia3049]

si se ponen zapatos se les infectan las uñas

[@00Spidy00]

Durante 24 minutos y 33 segundos solo pienso en eso.....

[@buktatoni]

zárt cipőben beizzad a láb...

[@RobertCochrane-tj6kn]

last guy just missed his foot

[@drones7838]

Wonder if Curtis from cutting edge engineering watches this channel

[@AlexS32-i2l]

His eyes bleed.

[@lepeejon2955]

I get the feeling his repair would be a tad different.

[@johngibson3837]

Wrote down the link for him as I think he'd enjoy this one

[@AndreyTarskov]

I've already sent him similar links, but he didn't react in any way 😂

[@donniecardwell3786]

That was exactly what I thought , I wonder if Kurtis watches this

[@patturk7408]

Love the way he throws his cutting torch in the dirt after that last cut at 3:30 .

[@Rambo_1738]

And?

[@idris-8048]

Посмотри какие длинные куски они отрезали и какие короткие куски приварят обратно? 🤔

[@GloOmUnderN1ght]

​​​@@idris-8048экономия должна быть экономнойГлянуть бы на тот погрузчик, на который будут пытаться поставить это.

[@edwardfletcher7790]

The guy on the cutting torch could be earning over $100,000 in the West with that level of skill 😮 WOW Also the only guy in Pakistan wearing eye protection while grinding !! 😮

[@rolleone4me]

No steel toes shoes, nor safety goggles..amazing no Osha ..Good job ! 👍

[@johnmartlew5897]

He’s been doing this work for twenty years. He has all his toes. What’s your point? OHSA might be a scam.

[@RUS-specteh75]

В конце шлифовал он в очках😎

[@alexalexandrovich3882]

Когда пакистанцы добрались до сварки - вариться стало абсолютно все! Без сварки не обходится не один ремонт!

[@djohokin2325]

Це майбутне фашиткої рашки

[@НиколайПодщелков-у7й]

Да дайте им наконец скотч с изолентой!

[@JurijBalke-nt6nl]

У них электроды специальные, загнутые.

[@всегдавпути-у7к]

​@@JurijBalke-nt6nlвот интересно, а зачем их загибают?

[@JurijBalke-nt6nl]

@@всегдавпути-у7к они у них тогда любой металл варют.

[@martinkilleen7607]

No safety gear but excellent hair gel

[@ingo_8628]

Exactly!

[@dougsmonsters4866]

That's axle grease😅

[@josemendoza-bo1cb]

xD!

[@chrisbeling7350]

The grinder guy had glasses. Great ppe . These guys are amazing . Emagen what they could do with the right tools . . And that's where all our machines come from .

[@SPUDHOME]

They wouldn’t know how to use the right tools. I am happy your machines come from there. I am more selective.

[@MICHAEL-ys3pu]

And what machines do they make, you better look into that one.

[@nismo2070]

As an auto tech in the US, I am always fascinated by the work done in other parts of the world. I am impressed by what they accomplish.

[@Серёга-н4м]

Я бы завтулил отверстие и обварил было-бы прочней и быстрей

[@psix127]

Они ещё не освоили технологи наплавка и расточка, как освоят то начнут

[@ОлегСлепцов-ч9х]

У нас просто по сварке вырезали старые и вваривали новые.

[@-kasparik-]

Зачем наплавлять или втулить, проще стрелу обрезать и новые куски приварить, те отверстия что он плазмой отчертил интересно соосно получаться друг другу? Я блин сотки ловлю индикаторами для посадки втулок с натягом, а тут уровнем ловят сотки относительно чего то

[@Nestandart-25]

@@-kasparik- они валы посадку скобой меряют

[@АлексейСобко-р9ж]

Стрела лежит на грунте, а они уровнем проверяют😂😂😂

[@sergey3157]

У них грунт по уровню насыпан)

[@Spiderman_10]

😂😂😂😂 еще и по бруску😂😂😂

[@ilhomshayzakov949]

😂

[@mansurgromov3933]

Да ты высокоточным оборудованием хрен сделаешь

[@VVBoris]

ну земля то плоская)))

[@Lawrence1203-f7s]

With all safety issues aside these guys do an almost impossible job in primitive conditions. Some day it may get safer.. Good job from California USA

[@CMAenergy]

They are not in privative conditions/ Just the way they are taught and live, And this type of repairs because of their safety issues should never be displayed or shown on You tube, As this gives the younger generation here the idea it is ok to work as they do, No safety shoes and definitely no eye protection,

[@azarellediaz4892]

Look at time lapse 2:00 and 12:00 and you’ll see they cut off pieces about 2’ long and replaced them with pieces 1’ long. 😂😂

[@martinw9425]

Measuring tape and level bough at Dollar store, with the sandals about 3 dollars, but the job was done right. Amazing, i m learning everyday with these peoples.

[@azarellediaz4892]

😂😂😂 Look at time lapse 2:00 and 12:00 and you’ll see they cut off pieces about 2’ long and replaced them with pieces 1’ long. 😂😂😂

[@iGermoRtis]

Great work guys! It’s very impressive. I don’t mind no gloves and boots, I just can’t cope with no safety glasses and cutting torch goggles. I’m glad you have a welding mask! Arc eye is very painful! - Best wishes from UK 🇬🇧

[@StihlRunnin]

No goggles for cutting is one of the few things I wonder about, there’s potential that they work with such thick material the light is rarely ever above the surface.

[@azarellediaz4892]

😂😂 Look at time lapse 2:00 and 12:00 and you’ll see they cut off pieces about 2’ long and replaced them with pieces 1’ long. 😂😂

[@detiDEVRHOSTblX]

Надеюсь шеф не увидит это видео😂 скажет "вон смотрите, в Сланцах и без робы а вам подавай робу за 20тр да обувь за 10тр еще и маску в какой вам удобно"

[@ЖизньПожарного-к6ь]

Я уже увидел! Завтра на работу в шортах и тапках

[@мазайбабай-р2ь]

Краги забыл и очки!

[@Федор-г8к]

😂

[@индеецДжо-я4п]

Братуха отправляй его за сварными в Пакистан. Они там видишь, все умеют. Главное чтобы электрод кривой был😂😂😂

[@БорисПрокудин-п5к]

Блин надо заказать электроды от туда 😂

[@nicnic1434]

Хвала мастерам, спасибо за видеоролик, спасибо людям за мастерство, спасибо за видеоролик.

[@juri_7942]

Ага... Особо условия и исполнение... Огонь...

[@Алексей-ъ7п5э]

Какие мастера? Сделали чисто для лайков, этот ремонт на первом же часе работы отвалится.

[@Mikhail_Zyablov]

ТБ по индийски - это нечно) Успокаивает только то, что запасных рабочих делают в соседнем цеху)

[@ilhomshayzakov949]

😂

[@мазайбабай-р2ь]

Да ещё защитные очки!

[@алексзавитушкин]

Это Пакистан

[@crossthreadmcalthair399]

Im a 46 yr industrial maintenance mech in America i got my magic! stainless insert with grease zerts and new shaft ill never have to see this beast again if the boss orders grease 1 time per week! We in america want our equip to live just like our Kid rock trucks! yankee special we dont have to deal with missuse!!!!!!!!!!!😂❤

[@АлександрРогозин-ц4я]

Судя по следам от газового резака на боковых поверхностях рукояти стрелы и по тому, что так режут- ремонт уже далеко не первый😊😊😊. А износ говорит о том, что материал в целом не очень, но при этом схема рабочая и ребятам респект!

[@stuartmccall5474]

Greetings from the UK guys! Amazing repair with only the most basic equipment. Ignore the arse-hole comments, you had a customer with a busted machine that was of little use to them in the old state and you have given them something to continue working with for a few more years. Is it repaired to CAT Spec(?), probably not, but if it breaks again in a few more years you'll just fix it again. That's what these dummies don't appreciate.

[@Алексей-ъ7п5э]

Он сломается через несколько дней, а не лет.

[@azarellediaz4892]

😂😂😂 a repair means to bring it as close as possible to like-new conditions, Look at time frames at 2:00 and 12:00 and you’ll see they cut off pieces about .75m long and replaced them with pieces .35m long. 😂😂

[@allanjoseph3639]

A standard WOOD and Spirit Level 😮😮😮

[@ibidu1]

The people who comment negative about this video no nothing about repairs like this. This repair was actually done right.

[@evgenka8865]

Я понимаю что страна не очень богатая. Но неужели нельзя себе обустроить удобное и безопасное место работы? Постоянно босиком в песке сидя что то делают

[@malcolmayres3607]

at least a concrete floor or a table or something

[@DMITRIY3003]

Ему дай стол - он на него залезет и на корты сядет. Видел как он стрелу резал? он на нее залез, хотя вполне мог работать стоя.

[@genehunsinger3981]

Do not worry my friend.Your lack of grease will not deter me.(I charge by the hour,in advance)

[@tismeagen684]

The original pieces cut off seemed to be longer than those they were replaced with! Any health and safety officer in a western engineering workshop would have kittens at these working conditions.

[@bruceshaw2402]

This isn't a western workshop or country , its Pakistan , stop comparing apples with oranges , they do the best they can with what they've got .

[@ralphf8951]

Mesmerizing, I can't stop watching these videos. Watch your eye's though, the UV will get to you down the road.

[@scottthomas5999]

Nice job with limited resources.

[@brucewelty7684]

the resources are limited due to them being backward. I would choose a word similar to retired but the algo would ding me.

[@redlion9199]

I just love the precision and technology. I would trust these gentlemen to do anything..❤ The final product is like new ❤ Great team work 💪💪💪👏💪👏 Oh I like your channel ❤

[@imal5006]

Лучше чем с завода)

[@namarhodge568]

Hay, guys; what are you doing? That is a wobble pin connection, supose to be that way! Wow! The owner of that loader got a lot more service life than the average owner. I bet the loader bucket is just as bad off. I can't help but think the bucket eye broke completely out is the only reason the machine is down. Great video. You guys do interesting work.

[@ДмитрийЮшин-н1ю]

Варят голыми руками, в сланцах........лютая жесть

[@kulibin2493]

И воюют так же.

[@jurybur_bobkov]

@@kulibin2493 ну про наших тож говорят что обмундирование за свой счёт заставляли покупать

[@ОксанаНикитина-х2х]

Ставят уровень😅 😂

[@wotfinowski]

Niespodziewanie pojawiły się delikatne luzy, wazzup by naprawił bez rozbierania maszyny na placu budowy.

[@josepereira1487]

😮de fato serviço muito bem feito pelas poucas condições econômicas os manos fizeram milagres imagina se tivesse poder aquecitivo para tecnologias de ponta 🤫.Sucesso parabéns manos

[@NagahElsharkawi]

Ido recommend these Videos to be Educational Materials in Vocational Industrial Schools

[@itzsamdiy]

For what not to work like this

[@phaseshift8032]

о_О не... Я все понимаю, но вы хотя бы вместо деревянного бруса заготовте ровную железку.

[@rudoy5725]

Понятие снять фаску им неизвестно, сварщик умеет только сжигать электроды, а что получается ему уже неважно!👍

[@priden4656]

Главное согнуть электрод)))

[@henrykkulawy9340]

​@@priden4656 Jak nie zegnie elektrody to spaw nie będzie trzymał. 😁😁😁

[@DieselCat222]

@@priden4656 варить вялым это святое))))

[@ШлемаРабин]

@@DieselCat222 kzbin.info/www/bejne/qnnNo2yNm56gqdk 😀

[@henrikstenlund5385]

Excellent work guys. I am a bit worried because the men did not have any protective gear for carrying out these dangerous operations.

[@StihlRunnin]

They do more in sandals than most will do in their entire lifetime. To many this is ignorant, to me it is impressive.

[@henrikstenlund5385]

@@StihlRunnin They may lose their health or limbs

[@StihlRunnin]

@@henrikstenlund5385 they might also do as such wearing all of the necessary protective equipment.

[@beeskov]

Любимые ролики "Тапки, сварка, и болгарка"😂

[@LloydJones-p7e]

I’m sure that the dirt is calibrated and level in order to get a professional fit, am!😊

[@scottbilger9294]

What was weird, considering how meticulous they seemed to be about the alignment.

[@carlosgutierres6690]

Buen trabajo 👍👍

[@burleyhutchison1620]

I am extremely impressed with their safety equipment; welding equipment and skill level! 😂😂😂😂😂

[@GenaNovyi]

Молодцы смотрел с удовольствием, респект и уважение мастерам своего дела.

[@RaulGomez-zq9bd]

Excelente trabajo y video gracias por compartir tu gran experiencia desde Costa Rica Maestro gracias

[@gmans2941]

You know if the knotheads that operate this equipment would grease it and keep the lubricants applied right these hard working repairmen wouldn’t have anything to do like fix these machines and make good videos. Keep fixing 👍👍👍

[@stickweldingtips]

Great point!

[@abelpadilla7789]

You must remember there’s some people that just don’t have access to grease to keep on hand and when they do they do.

[@gordonwelcher9598]

The fine equipment that we produce is too good for them. they should be limited to horses, oxen and maybe a couple of elephants.

[@JosueNaterasLemus]

Josué Nateras saludos amigos desde México es interesante el trabajo que realizan

[@CarlosGarcia-zi1wp]

👏👏👏👏👏 que buen trabajo!!

[@dennismazurek961]

It's amazing how how these guys work around heavy equipment and wear sandals on their feet

[@svenp6504]

That poor machine... there should be a law against that kind of abuse.

[@MartinLegare]

Nice welds, no porosity, looks solid. But arent the arms shorther than previously?

[@imtheeastgermanguy5431]

Nice welds doesn't mean that it's a good weld. They started in the middle of the arm and left a area which they filled up later. I'm not a expert in welding but I would have started from the outside and even welded to it so that I can start from the outside and go with the weld material in the V

[@Bobr2302]

Выполнить эту работу на земле в ручную? Парни молодцы.

[@СергейБ-и6щ]

Молодцы ребята, все могут починить!

[@jjr9317]

Next week a film about another welding of the same element. We invite you. Either we finally get an Oscar or we will run out of machine.

[@J4M3Z.T]

Strong brothers getting things done, what they do works for them so let them be

[@PriscillaEsbensen]

i like the red wing safety sandals ohsha certified

[@twalrus1]

These people use the hell out of their equipment, then repair it to work for another twenty years, then repair it for another twenty years. The word "disposable" is not in their language. And their equipment never dies. That should be their motto: "The Land Where Equipment Isn't Allowed To Die." Keep doing what you do.

[@andrzejporeda7281]

Super jest to zrestaurowane pozdrawiam serdecznie👍👍👍👍👍

[@nixonnaranjo7803]

Respetar la vida y cultura es grandioso usa su sandalia le vemos su pie si machucone lo bueno es soluciona con lo que hay y lo hace son uno artista del hierro pueblo de muchos trabajos

[@scoobtoober2975]

Incredible work. The precision is always there when needed.

[@ВасяВасин-о9л]

Номинант на премию Дарвина, искра от шлифмашины, на газовый баллон-это шедеврально

[@iloveslideking]

Precision is the key to success. Only in Pakistan.

[@njm3211]

Amazing freehand cutting

[@АлександрКулагин-э1ф]

0:19 мин- как вы вообще ,,заметили,, такой износ???😮 Почти без люфта😊

[@Dan-fr1zg]

Incrível é os caras trabalharem de branco sem nenhuma mancha de sujeira na roupa. Pra quê eu não sei, mas o sabão e o cuidado são ótimos

[@ancientbriton8262]

Great video great skills with just basic tools 😊

[@toddhunt4308]

Very excellent work amazes me doing this in the dirt and the results of the job are pretty damn good

[@valveman12]

Great workers, but safety does not seem to be a concern. 8:06 No safety glasses... 9:39 Hide and seek welding.

[@Miaflower-w1c]

Respekt fur den Handwerk. Das können die Jungs richtig gut. Klar Qualität ist alles andere als Super, aber die können es ja jederzeit wiedee in standsetzen. Sehr gut. Und deren Sicherheitsschuhe sind klasse, nicht so wie bei uns muss man Schwere Schuhwerk tragen.

[@carlosluiz-t7e]

gosto de assistir os vídeos de vocês admiro a inteligência de vocês !!!

[@cameronlilly4814]

Nice work; much better than what they started with.

[@jonasberlin5594]

Love how they are double and tripple checking every line, and using the original bolt to check fit. Guess if you have no premade jigs you have to constantly check what you are doing. I would be a little bit worried about slag inclusion, though.

[@johngibson3837]

Measure twice cut once mate

[@azarellediaz4892]

😂😂😂 Look at time frames at 2:00 and 12:00 and you’ll see they cut off pieces about 2’ long and replaced them with pieces 1’ long. 😂😂😂

[@danielelliott3659]

Anyone that thinks this is a good repair has never worked on heavy equipment.

[@anthonyromayo9255]

Bro, these people haven’t taken a bath in years. They could give a shit

[@thomasschulze6715]

You are right considering our standard in tech! For Pakistan, this looks fine and impressive considering they don't even have a half descent welder! Just a power line and full amps XD

[@dougsmonsters4866]

😅they also ran the level off a 2x4 on a dirt ground😅

[@alejandroleon8583]

Trabajan totalmente limitados en equipo. Cero equipo de protección

[@alejandroleon8583]

Esas soldaduras requieren un electrodo especial precalentamiento de las piezas para que no sea una soldadura superficial sé necesita la fusión de las piezas

[@azarellediaz4892]

Did anyone else noticed they cut off pieces about 2Ft long and replaced them with pieces half that length? Compare the arms at timeframe 2:20 and 12:38 …

[@Ron-d2g]

Looks amazing to me , bring them to Australia They would make excellent TAFE teachers as we have shafted all ours

[@fjgdlud8030]

Уровень чуть-чуть сломался! 😂😂😂

[@Rag.lodbrog]

Уных зарплата маленькая и стоимость работы тоже По этому нет нормальный инструментии...

[@johngibson3837]

This was good work, so i take my hat of to the lads envoled

[@user-rl5cl9fg4w]

Электроды уони, а сварочник Ресанта 😊

[@joserobertocuccocucco4508]

Gosto de ver vídeos de vocês trabalhando, abraço meus amigos que Deus abençoe vocês!

[@mickjones1941]

a bit of maintaince in the first place would have helped

[@edwardmartinez9459]

Not overloading it to would help.

[@luisricardojaviernunezzamb8352]

¡¡Trabajan fenomenalmente!!❤❤❤❤🎉🎉🎉🎉🎉🎉🎉🎉

[@professor_thunder]

They do the best with what they have and those posting critical comments should post videos of their fab work. Post the links boys!

[@edwardmartinez9459]

They bring it on themselves overloading the trucks.

[@bernardbenebig7276]

Jolie travail les enfants comme neufs🙏👍

[@allanstriber5272]

Great precision work gotta love india

[@NormanSilv]

Skills needed to be a great field repair team.

[@KarimKarim-yx3ty]

السلام عليكم وتحية طيبة عمل رائع بوركتم ...هل عندكم فيدوات للتعليم فن اللحام ..وشكرا متابع هاوي ومبتدأ في تعلم اللحام ...من دولة الجزائر

[@yc1742]

따봉 👍 👍 👍 😊😊😊

[@francoisayella6009]

Un bonjour de France, super boulot, génial d apprendre aux enfants c est la rele de demain ❤❤

[@azarellediaz4892]

😂😂😂 Look at time frames at 2:00 and 12:00 and you’ll see they cut off pieces about 2’ long and replaced them with pieces 1’ long. 😂😂😂

[@marimfernan2161]

E vc são bom no que vcs fãs vcs estão de parabéns ❤❤❤❤❤

[@ivammacedo4820]

Com certeza se aprende mais com esses caras que numa fábrica

[@rubencantu5067]

Long after civilization is gone, these guys will keep things working no problem

[@RTT333]

Bel lavoro, rispetto ai altri tu ragazzo fai la diferenza. Bravo

[@johnj4130]

I would have thought they would have cut the worn hole out and welded in harden inserts with new pins.

[@johngibson3837]

Mate there was no hole left it was fuxked they did good work

[@afnDavid]

As long as a people/society thinks primitive they will continue to be and live primitive. Can they boot-strap themselves into the 21st century?

[@SandeepSingh-k1d3n]

Wah Pakistan wale veero Kamal di karigari aa aap ji di Allah bless you ji charge Punjab ton bahut Sara piyar ji

[@stickweldingtips]

Thank you ♥️✌️

[@LolPepperGate]

They should arc gouged the pin guides/bores out then machined a new bushing to burn in. Lol

[@jsmith9970]

Maybe if they understood what a grease gun does that stuff would last a lot longer.

[@syromozartdantasdeoliveira6955]

Excelente trabalho parabéns

[@kiskis1970pk]

Without special tools but with big experience

[@lucvilleneuve7927]

Dam right i am amazed at there skills but ..the hell with safety