Sticky Roller Door: Solved! Quick Fix for Sticking when closing + how to re-tension springs [119]

Рет қаралды 27,624

That Roller Door Bloke

Күн бұрын

Пікірлер: 48

@leslierichardson9068 2 ай бұрын

Thank you, your video saved me when I had ballooning. now the door runs perfect.😀

@rollerdoors 2 ай бұрын

Glad I could help! Thanks again

@andrewposa447 3 ай бұрын

Great advice throughout. Well done.

@rollerdoors 3 ай бұрын

Thank you kindly!

@Interknetz 27 күн бұрын

You made it look easy to put more tension on. Our door has a lot more tension!

@rollerdoors 24 күн бұрын

Haha yeah maybe muscle memory! please be careful it’s under some reasonable powerful spring tension but not overly crazy like a panel lift door (2 turns compared to 8). Also never 👎🏻 attempt when the door is closed only open.

@Interknetz 24 күн бұрын

@@rollerdoors Probably why it was tough for us, I think we did it whilst closed since there was limited space. Can't remember as it was so long ago. Probably why we did quite a few turns too. Certainly enough tension in there to kill someone!

@anitaward9200 Ай бұрын

Thanks for the roller door video clip, most helpful. Cheers IRVINE.

@rollerdoors Ай бұрын

Cheers Irvine 👍

@alzybladerunner954 5 ай бұрын

Hey mate, just recently hoped into this trade of work and I’m trying to be a sponge and absorb all types of knowledge and I just want to say your vids are clear, educational and fairly simple to understand. Well done.

@rollerdoors 5 ай бұрын

Thanks, I’m all for sharing knowledge experiences as there was almost no resources when I started 20 years ago. Where abouts are you located ?

@ianfrost1419 2 ай бұрын

Awesome brother 👏 The only thing that could help is marking the track with a witness line or mark to keep track of have you have moved it. Very helpful video, thanks 😊

@zacj63 6 ай бұрын

One of the best videos mate, l have same problem but my door manual doesn’t have motor can I follow this video our its different way to fix manual roller garage door?

@rollerdoors 6 ай бұрын

Thanks. Yes, absolutely 👍🏻 but it probably requires some spring tension I’ve got a video on that too

@WestCoastMountainBiker 6 ай бұрын

Dude. Thanks a lot. I've been searching rollerdoor videos and info on the internet for some time. I didn't realize that my door had a tension issue. Sorted that out thanks to this video. Now I am batteling with a controller for the motor that only lifts up... and doesn't want to lower the door. Limits checked. They look like they work. So my thought was reprogram a remote. Now my remote is not having any effect.

@rollerdoors 6 ай бұрын

You’re welcome!! One direction could mean a faulty limit switch or plug to the box

@WestCoastMountainBiker 6 ай бұрын

@@rollerdoors hey. Thanks for the reply. It looks like one of the relays is the issue. I figured it out by tapping on it with a screwdriver. It seems like it works for a while. And if it doesn't giving the relay a tap does the trick again. Would I be able to replace the relay with a soldering job? Or should I think of relacing the entire control box? The remote issue seems like the receiver needs the be replaced.

@ohurl Ай бұрын

Great video

@Justinjames1986 6 ай бұрын

Thanks mate, I need to try this tomorrow as mine is all the way up but ballooned!

@rollerdoors 6 ай бұрын

Awesome Good luck! 🤞🏻 and stay safe

@michaelsauer9038 Ай бұрын

Hello mate, great video. The fabric lining which is stuck to my roller door has started to come loose in a couple of spots. Therefore in these spots it is jagging out slightly and I think it is preventing the 3mm gap on one side. The door is sometimes going to half way before auto rolling back up. In this case is it possible to for instance super glu it down to the door in those couple of spots? Thanks!

@rollerdoors Ай бұрын

Hey 👋🏻 Yeah if it’s causing an issue super glue will work just fine. That’s actually a good idea.

@glitched4070 Ай бұрын

Great video 👍

@rollerdoors Ай бұрын

Thanks 👍

@Swenser 5 ай бұрын

Just like a bought one. Sweet. For a problem where the door stops and reverses, could it also be a problem with the brake mechanism within the motor assembly?

@Bezzzzman 18 күн бұрын

Hello.... where can I get a spare guard block p/n 7153? Mines worn out.

@Bezzzzman 16 күн бұрын

My door now won't open. Per your instruction, I re-tensioned the spring so it doesn't drop at half open (half turn down on the wrench). So I guess I have to back the spring tension off? The motor seems to be straining. So I back off the spring tension? Cheers.

@Mick_Au 7 ай бұрын

Another door fixed by the king!

@rollerdoors 7 ай бұрын

🤩💪🏻

@zacj63 6 ай бұрын

Very helpful video mate👍 Is lt always the left side to retention ?

@rollerdoors 6 ай бұрын

Cheers. Any side is ok but always pull down on the shaft.

@zacj63 6 ай бұрын

Thanks mate much appreciated 👍👍

@zacj63 4 ай бұрын

I tried to fix it last weekend. I retention three time from the right side, and two times from the left side, but it looks the same. It’s still ballooning. Then I realised I did the retention when the shutter is down. Nothing changed and still ballooning. Do you recommend I open the shutter up and do the retention, and can I do the retention from both sides or only one side? Thanks for your patience. Appreciate your help.

@jeffgarry890 2 ай бұрын

When re-tensioning should the motor be disengaged? I noticed you had the motor engaged!

@rollerdoors 2 ай бұрын

Doesn’t really matter. However, it is an extra safety feature to have it engaged because if it does lose tension, Door won’t drop.

@annettecrofts6845 6 ай бұрын

Hi Can you help I have a reverse roll roll a door that has lost its tension and has ballooned, It is currently rolled up do I need to release and let the door down before re-tensioning?

@rollerdoors 6 ай бұрын

Best to do it rolled up.

@annettecrofts6845 6 ай бұрын

Many thanks

@ngocthachnguyen3321 2 ай бұрын

Please let me know where the battery of the motor,thanks

@rollerdoors 2 ай бұрын

No battery all mains powered

@rollerdoors 7 ай бұрын

It's gonna happen! Your garage door, gate, or window shutters will need fixing someday. Prepare now with my DIY video tips! Subscribe and join the community! Plus it motivates me to make more videos (it’s free) tinyurl.com/garagedoorsYT

@Mayocopter 3 ай бұрын

Why silicon spray the tracks? That will collect dust and grime which the felt will start getting ruined collecting grime then eventually getting tacky and start sticking

@rollerdoors 3 ай бұрын

That’s a great point! Silicon spray is a fantastic choice for roller door tracks because it doesn't leave a sticky residue or attract dust like oily sprays like WD-40. And unlike oily sprays, silicon spray doesn’t oil or grease the tracks, which can actually cause more problems by attracting dust and turning your nylofelt edge black and sticky and will 100% ruin your door. I’ve been recommending silicon spray for over 15 years now, and I can confirm that it’s a reliable and effective solution for garage door track maintenance. Remember: Many garage doors have a sticker that says “Do Not Grease.” This is because greasing the tracks can actually shorten the life of your door. Silicon spray is a great alternative that won’t void your warranty and can help your door operate smoothly for years to come but manufacturers would never tell you this because they don’t want your door or service interval to be prolonged as this is how they make revenue.