I have a 300 in line six in my , 1983 Ford f150 ,and thirty years i had it and still driving it i got 400,000 and still keeps going.Best motor i ever had .
@Markdc943 жыл бұрын
No offense intended but it's highly doubtful you or i will live long enough to wear out our 300 in lines. I'm 64, with a pristine 96 F250, 4.9, 2WD, auto tranny, so if i even live another 20 years i guess my nephew will be driving it with the factory stock engine in it. My biggest issue is the socialist will stop the gas, and that's sad.
@Quint18363 жыл бұрын
@@Markdc94 you just can't kill a 300 six!
@scottprestenbach6094 Жыл бұрын
Both of my 1991 trucks has the 300 in it. The f250 5 speed has 600k+ and the f150 automatic has 178k and you can't tell the difference between who has more miles. There no differents between them
@TheGtaexperts18 жыл бұрын
I'm a Chevy guy 100% but those inline sixes are the torquiest gas motors EVER built
@sethmullins83468 жыл бұрын
Best six ever in a pickup truck. But most torque? Almost... International had an engine that could come as both a diesel and a gas. They had a gas one in a road grater up at the city and that bastard broke one of those big ass axle shafts..
@republicansareoffendedeasi8216 жыл бұрын
DAVID Smith I'm putting a 300 straight 6 in a car.
@Mr666Rev6 жыл бұрын
Seth Mullins The most torque from a gas engine. Of course diesel will have more low end grunt.
@Heartstrong_Productions6 жыл бұрын
Bud, if you've ever seen engines made to work on both platforms, they're horribly unreliable at their best and totally unworkable at their worst.
@thadcastle_54316 жыл бұрын
Amen to that 😂
@brandondannys-menary36786 жыл бұрын
Not the fastest truck in the world, but sure as hell are one of the most reliable (referring to the 4.9l inline 6)
@chrish16955 жыл бұрын
Stuff stuff and More stuff nope slow af but gets the job done
@Quint18363 жыл бұрын
@@chrish1695 it's not that slow. I daily drive a '74 F-250 Ranger SuperCab. 8100 pounds. 300 keeps up with traffic no problem. Does 60 all day long. If you are referring to the quarter mile then yes. But if we went by things that would lose the quarter mile, most manufactures would have long since gone out of business.
@michaelcrouse82382 жыл бұрын
@@Quint1836 man finally another person with a super cab 300 I got an 82 but she's still pretty mint
@Quint18362 жыл бұрын
@@michaelcrouse8238 right on man! Check out my truck on Quint 1836
@mageminx75512 жыл бұрын
It’s a shame they came paired with an m5r2 and a garbage front end
@jonahguffey15087 жыл бұрын
The 300 i6 is the best gas motor ever built
@dustinontaiyabbi56084 жыл бұрын
It is listed as one of the greatest engines ever produced
@lawnmowermanlawnmowerman99304 жыл бұрын
@@dustinontaiyabbi5608 Yes it is
@freqeist4 жыл бұрын
yes I have one in England
@Quint18363 жыл бұрын
Hands down
@martia38253 жыл бұрын
Amen
@zzremington6 жыл бұрын
Those Ford inline 6 cylinders (300ci I think) are notorious for pulling - used to have them on the farm as work trucks - they could pull huge tree stumps out of the ground where some back hoes couldn't.
@dustinhaynes26175 жыл бұрын
Yes sir, 300 or 240 cid
@Quint18363 жыл бұрын
The 240 was it's baby brother, discontinued about 20 years before the 300. Just saying for those who might not know. I daily a 300, not bad on gas, considering my truck weighs 8100 pounds, and it's got torque into the next county
@xptics8 ай бұрын
grand total of a whopping 87 horsepower, but all the torque, i bought a rusted out f150 that was on its last legs with the intention of beating on that motor till it blew up and it has yet to blow up 😂😂
@issaccrockett34217 жыл бұрын
i stand by chevy 110%. but the best ford motor is a 300.ive had a few of them. most bulletproof motors ive owned. if you keep the body of the ford good it will last a lifetime
@theinstitute13243 жыл бұрын
Always an issue with those square bodies, but the fords I think are the ones I've seen the worst on across the board. Rust, rust, rust. You gotta keep em right clean.
@trentonemerson91493 жыл бұрын
@@theinstitute1324 my 89 sat forever barely any rust at all
@theinstitute13243 жыл бұрын
@@trentonemerson9149 Maybe so, but really depends on where it sat, where it was driven, and if there was any rust on it beforehand. Although granted I see it mostly on the body and such, you don't have so much compromisation on the frame.
@trentonemerson91493 жыл бұрын
@@theinstitute1324 im currently fixing it for my first truck and vehicle grandpa passed away and my grandma gave it to me..
@bruceparker93539 ай бұрын
Bought a 91 f-150 new with 300 six in Detroit MI. Kept it for 15yrs. Everything rusted but windshield. 200,000+ miles, still didn't use oil!
@juanmasa27005 жыл бұрын
Built Ford tough 4.9 inline 6 Legendary stats, performance, Durability
@bruceparker9353 Жыл бұрын
One thing that makes the 300 (4.9 for u younger fellas), last so long, is they don't have a timing chain. Everything up front is geared.
@badass6.0powerstroke10 Жыл бұрын
Aren't pretty much All Straight 6,s Geared, (No Chain) ?
@TheSleepyMechanic0524 Жыл бұрын
@@badass6.0powerstroke10no. Only the 300 was.
@badass6.0powerstroke10 Жыл бұрын
@@TheSleepyMechanic0524 What about Cummins Diesel Straight 6,s I've only seen Timing Gears on them ?
@tylertorres77089 ай бұрын
I think he's talking only for gas inline engines but yes cummins are gear to gear
@141runnАй бұрын
@@TheSleepyMechanic0524 the chevrolets were too, even the iron duke 2.5 4 cylinder
@edwinsalazar7306 жыл бұрын
Ford all day everyday 💯
@rednecknickell19602 жыл бұрын
Been a Chevy man my whole life, with the exception of this engine. Dad bought one because we needed a truck and the price was right, and I would own another one in a heartbeat. Not fast, but pulled anything we ever hooked to it.
@anthonyperella99256 жыл бұрын
Yea someone in a 350 hooked up to me in my 81 f250 straight six. pulled em like a trailer.
@brandedmcgowan94145 жыл бұрын
The best small block v8 and best gas i6 ever built both equally efficient reliable dependable durable and torquey
@butters50983 жыл бұрын
Your right bout the straight 6 boi but nah I say the 5.3 LS is the best small block ever (99-06)
@Quint18363 жыл бұрын
Ford guy 100% but a 5.7 350 is undoubtedly an amazing motor. Weather it carb or tbi
@trentonemerson91493 жыл бұрын
@@butters5098 no lol
@brandedmcgowan94149 ай бұрын
The best one is the vortec 5700 with sfi vortec heads (255 hp @ 4600rpm/335 lb ft tq @ 2800rpm @@Quint1836
@farmerdude35788 жыл бұрын
The engine is not the dominate factor here. If that ford has the creeper 1st gear it should have won that war hands down. You drop the clutch and put it to the floor.Tires are another big deal.
@brandonbridges89636 жыл бұрын
That body style came with an M5ODR2 transmission made for really light duty. First gear isn't much if any lower than it would be in a car. If they pulled for a long time I wouldn't be surprised if the transmission gave out before the clutch if it was a good one. The heavy duty ZF5 came in F250HD and up
@ericouellette52935 жыл бұрын
@@brandonbridges8963 yea the 4 speed was better behind the 300.
@ericouellette52934 жыл бұрын
@@brandonbridges8963 I couldn't see the front end but ford starting in 87 till 93 had both a 5 speed and a 4 speed in their f150s. 92 was the last yr for the 4 speed. I have only saw one 92 f150 that had a 4 speed. I almost bought a 90 f150 302 4 speed for the tranny. Was going to put the 4 speed in my 87 and get rid of the c6 auto.
@Quint18363 жыл бұрын
Yes, had it had the Borg Warner with the 6.71:1 granny gear. (I think that's the ratio) then it would have pulled all day. But I'm pretty sure this one has the Mazda 4 speed with O/D
@farmerdude35783 жыл бұрын
@@Quint1836 sometimes it’s just who’s behind the wheel. Them 5speeds manual are great transmissions also. The 1st gear in that 5 speed is very low. Something does not add up here. The tires break loose or front end will lift before that clutch slips.
@shackman95666 жыл бұрын
Truck vs chevy.
@blackericdenice9 жыл бұрын
I thought the truck was an automatic. You telling me that moron was slipping the clutch the whole time.
@waylonmccrae35463 жыл бұрын
I had a 292 Ford & a 292 Chevy as Farm Work Trucks ... They were both excellent down low with the right gears !!
@chrish1695 Жыл бұрын
chevy knew he was gettin pulled and held his brakes
@dodgeramsport015 жыл бұрын
There is no Chevy on the planet that will ever out do a Ford!
@lawnmowermanlawnmowerman99304 жыл бұрын
My friend I'm a Ford man too,as a matter of fact I'm also a retired Ford Technician and I do love the 300 i6,but in the 1960s GMC had a line of truck only V6s that would very likely out pull our beloved 300. The GMC engines were> 305,351,401,and a huge 472 and they were all V6 engines. My dad owned several during my youth and I can attest to the fact that if that GMC equipped with one of those engines couldn't pull what ever you hitched it to,it would break the clutch,trans or differential trying. My dad ripped three rear ends out of his 63 GMC in less than a year trying to pull extreme loads. Those GMC V6s just didn't quit,that 63 seemed to have no limit of power.
@dustinsanders23794 жыл бұрын
@@lawnmowermanlawnmowerman9930 I had a 300i6 in an 87' f250 with a granny gear that I pulled a 24' gooseneck with 2 scissor lifts, a backhoe, and 2 boxframes that held a large welder and large tool box.
@dustinsanders23794 жыл бұрын
@@lawnmowermanlawnmowerman9930 I'm not saying those old v6 weren't tough but the 300i6 is literally known for that low end torque. It gets peak twist at 2k Rpm. Those old v6s can't do that. They were still badass
@lawnmowermanlawnmowerman99304 жыл бұрын
@@dustinsanders2379 My friend I'm a Ford man thru and thru and have owned several 300 sixes two recently as a matter of fact and I do love that engine,but I also grew up around that GMC V6 of several different displacements and believe me they were some kinda torque monsters. Actually those are the only GM built engines I'd be remotely interested in owning anymore. The GMC V6 was nearly a match for the Ford 300 I6 or as close as GM ever got in my opinion. My Daddy had several of both over the years in his truck fleet for his well drilling business. So I've seen both pushed to their limits and beyond many times.
@invalidargument479 Жыл бұрын
They used to put those old 300 Inline 6s in dump trucks because they make so much low end torque. I personally wanna see this beast go up against a 460 big block or even a 454 Chevy (or better yet both 😁)
@yourwifesboyfriend19486 жыл бұрын
Drop a halfway decent clutch in that I6, and it would've been like a baby pulling a wagon. Drag racing would be a different story, though lol
@Quint18363 жыл бұрын
Well yeah. Ford designed them for tractors, but were too much for then N series. 300 foot pound of torque at 2300 rpm. I'm not saying it could outpull a 5.9 cummins, but it could easily keep up
@RayFinkle222662 жыл бұрын
Probably not a different story
@mageminx75512 жыл бұрын
No just drop a half decent tranny and you’re set but in I think 92 they put a garbage trans in with this legendary engine and I hate it
@jameskerrigan29973 ай бұрын
Guy was drag racing inline 6 in the 70's. They fined him for cheating even though they couldn't find how. 300 can eat a 350 alive on the track. 6 one barrel carbs.
@jameskerrigan29973 ай бұрын
Bruce sizemores 300 with 351 Cleveland head. That's a 6 cylinder for the race track.
@Sackmatters9 жыл бұрын
Built 350 as in exhaust and air intake lol doesn't sound special at all.
@colbye12059 жыл бұрын
No, as in ported heads, stage 2 400 turbo transmission, bored .060 over oil and water ports, full under drive pully system, mass air intake system(JET), mild cam, full Borla exhaust system, forged rods and pistons, and 42 pound fuel injectors.
@sethmullins83468 жыл бұрын
So basically just rebuilt. Nothing special about that build.
@mechanicalking7 жыл бұрын
Seth Mullins yep
@jeremymiller19266 жыл бұрын
Lol mild cam? Ported heads? Lol.
@TylerGibsonMusic5 жыл бұрын
Seth Mullins Either way, it got beat by a stock ford inline 6. I don’t see why people try justifying this lol. You can’t beat this engine. Period.
@MrCliffda3rd Жыл бұрын
I'd rather have both these trucks than those high techy problematic turbos and 10 speed transmissions.
@dohc16vturbo4g632 ай бұрын
Turbos are amazing. Baby Turbos in big block 4 cylinders is not. It is cute hearing it spool up though 😂😂
@wyattmullins97492 жыл бұрын
Haven’t watched the video yet. But I’m a Chevy guy and I’m guessing the Ford is gonna win. In-line six will move a mountain with enough tread😂
@kaboomboom10007 жыл бұрын
I couldnt see but was the ford putting on its brakes at all or was it just the chevy doing it
@Mr666Rev6 жыл бұрын
kaboomboom1000 It didn’t look like the Ford’s brake lights came on at all, but the Chevy locked them up as soon as the Ford tugged him back.
@The_Monarch15 жыл бұрын
Built 350😂😂
@jessesmith52594 жыл бұрын
Brake holding is an instant loss here, it doesnt matter if you're in a duramax vs a pinto the moment you start moving backwards if your brake lights come on you lost.
@wesleycollins7266 жыл бұрын
Ford 300 and AMC/Jeep 4.0 are the two greatest engines ever. SBC 350s are good for speed but not for work or longevity.
@manasseh75 жыл бұрын
Wesley Collins you got that right
@ericouellette52935 жыл бұрын
Yep had a 350 in a Silverado I had. Couldn't plow snow in 4 high didn't have the power to move the truck. Had to use 4 low. A buddy had a f150 300 six he could plow in 4 high all day long no problem.
@lawnmowermanlawnmowerman99304 жыл бұрын
Amen brother,my dad loved both brands but we had to do some major repair on about every small block chevy engine he ever owned. I myself have always been partial to Fords because dad's Ford trucks always were more durable than the Chevy/GMC trucks he owned. I repaired both brands during my 25+ years as a mechanic,but I still prefer a Ford over GM and both of my current vehicles are Fords(2001 F150 Supercrew and a 2005 Freestyle AWD
@christopherologist4 жыл бұрын
My daily is an 89 f150. My last daily was a 98 2 door Tahoe with a 350. Still ran strong the day I sold it with 409000 miles. Your arguments are lame and unfounded.
@caryhuffii72242 жыл бұрын
I'm a ford guy but the 350 was a good engine.
@boss9mustang4043 жыл бұрын
There are currently 105 salty chevy fanboys lol!!!!
@fletcherchad94343 жыл бұрын
Why? Neither truck did anything
@dylanclay27413 жыл бұрын
@@fletcherchad9434 they can't stand the fact that an inline 6 is pretty much neck and neck with a v8
@fletcherchad94343 жыл бұрын
@@dylanclay2741 the guy in the Ford gave up because he thought he smoked his clutch. To me he lost right there. Also displacement matters more than number of cylinders. You do know a 300 straight 6 has pistons 1.5 times the size of most small block v8s right? Gear ratio determines torque so there's that. I have a 92 f150 with 4.9l in it and a 2021 gmc 1500 with a 5.3. The gmc can definitely pull more weight.
@Quint18362 жыл бұрын
@@fletcherchad9434 Because it has a V8....
@fletcherchad94342 жыл бұрын
@@Quint1836 And? You do know there is more at play than number of cylinders right? Starting with that chevy probably has 3:73 gear ratio and that ford probably has 4:56. Torque matters. And tires matter too. The guy in the Ford actually gave up because he thought he smoked the clutch so the guy in the chevy won anyhow. I have a 92 f150 with a 5sp and 300 straight 6. I also have a 2012 chevy with a 5.3. I generally tow with the Ford and everything else I do with the chevy. The chevy has more power but less low end torque. Not to mention the Ford goes from 0 to 60 in about an hour.
@willpowell75522 жыл бұрын
Tell the Chevy guy to take his foot off of the brake and you will see what happens
@mw3gamer237 жыл бұрын
Weight my friends is a big deal during these tug o wars not so much torque you can have all the torque in the world but if ya ain't got the weight you ain't pullin nothin
@yourwifesboyfriend19486 жыл бұрын
Just spinning tires while getting pulled backwards. Tried tugging a F350 V8 with my cammed I6 -- Centerforce clutch, head-work, and everything. Once my wheels spun, it was over. lol
@mr.manson11956 жыл бұрын
I thought those older ford's were light compared to newer trucks.
@stabbitythecricket20765 жыл бұрын
@@yourwifesboyfriend1948 well also an f350s have straight axle
@zachshipley16894 жыл бұрын
More like traction
@Qweeds3 жыл бұрын
Now this should be a ford built tough commercial
@williampennington53074 жыл бұрын
Nothing against the chevy but I had few of the 300 straight 6 fords heard too bit
@masonbennett28553 жыл бұрын
Two of my favorite engines
@colmanbaldwinson9091 Жыл бұрын
Everyone talking about the engine while im just mourning the passing of his clutch 😭
@williamstidham2163 Жыл бұрын
If you ever see a chain snap, you would never do this, Deadly stuff here
@connellyslandmanagement7253 жыл бұрын
Lmfao he almost burnt the clutch out lol
@TylerGibsonMusic5 жыл бұрын
LOL look at all the dislikes! Looks like “someone” is mad lmao
@kristiana13684 жыл бұрын
Tyler Gibson yeah cause these dumb asses don’t know got to tug o war.
@fjb35443 жыл бұрын
Peak torque right above idle
@Quint18362 жыл бұрын
Pretty much
@zachfox59696 ай бұрын
I had 2 94s, 3 95s, and a Z model 96.5. Ford screwed the bunk when they tried to modernize this thing. Bone stock, pre OBDII, PERFECT. That California emissions was the last I owned. Got tired of everything being different. Firing order, EGR, it had EGR tubes from a 5.4 Triton. Stupid little things they should never have done.
@Project-gr6zy4 жыл бұрын
I have n 88 f250 T18 4.9l 3.55 diff and 4x4
@tylerpripps49696 жыл бұрын
LAMEST "PULL" ever!
@outdoorlifemaine6691Ай бұрын
This boy in 2024 today I bought myself a 1982 Ford F-150 four-wheel drive with an inline 6 and a 4-speed on the floor
@joshuadavis862Ай бұрын
Hey everyone Jesus saves accept him as your savior today and repent if you haven't already he's coming back soon be ready.✝️🙏✝️❤...
@adamm1998 Жыл бұрын
To all you guys comparing torque numbers... The 300 six makes all of it torque under 2000rpm, it rotating assembly is very heavy. Numbers on paper can't tell the whole story. A heavy mass is hard to stop, that's why when these 100hp engines start spinning they are very hard to stop
@dustinshadle7324 жыл бұрын
while i agree the ford I6 is a damn solid engine, and can be made even better, putting out more power and using the same fuel, and being much more lively on the road, the key here looked like the lack of pulling experience. once that smoke started rolling on that chevy, hammer down on the ford, that hot rubber on the chevy wouldnt give any bite, ive used the same tactic on a ford hi boy with a really mile 68 ford 390 build put into the hi boy, and the 454 i pulled had to be more powerful. it was a vortec and it ran great. i let those tires get hot and dagged him a couple hundred feet. i never broke traction. we were both running 33 12.50 tires on different rims and mine were out of manufacture and half gone. i took out the front drive shaft and the rear axle needed to be adjusted on the chevy. had i kept going, im sure the t case woulda gone next. i had a weaker design t case with my np203 but better crawl ratio. he had a 5 speed with creeper gear, i had a C6. but we were pulling in 4hi. i did have lockers on both axles stock, and both were dana 60's. whats a lot of fun is seeing the early datsun and nissans play at a county fair track lol.
@austinduncan1271 Жыл бұрын
And the 350 was using his brakes 😂
@chrish1695 Жыл бұрын
the whole time.
@maleighafletcher45179 жыл бұрын
can't beat that 300 v6 its built ford tuff
@acres909 жыл бұрын
+Maleigha Fletcher I-6*
@heavy_z71477 жыл бұрын
Maleigha Fletcher the ford lost though.
@mantisushi7 жыл бұрын
heavy_ z71 nah fam
@timherendeen33027 жыл бұрын
Maleigha Fletcher straight 6.
@Mr666Rev6 жыл бұрын
heavy_ z71 how did the Ford lose? It held the Chevy at bay with two less cylinders. The Ford 6 ties the Chevy 8, and you want to talk shit in the Ford?
@PhongNguyen-nz9kz5 жыл бұрын
I got that same green truck, in-line six truck. It is 2019 and I only have 69K miles. The thing runs like a champ still. Love that truck.
@danbuckmaster50849 ай бұрын
Someone should teach the hotshot person in the chevy not to spin his tires like that. he's making them soft and useless by doing so. then the ford with is able to pull it to its death.
@141runnАй бұрын
the inline 6 is probably the best balance built engine ever, no mater who makes it.
@scottlyles46513 жыл бұрын
I have a 292 out of a c50
@GoldenGun-Florida Жыл бұрын
I bet George and Barney each spent a bundle on their truck and neither has ten cents saved for retirement.
@billythekid64186 жыл бұрын
Got an 81' 4x4, 3 speed granny, with a 300 and its pulled everything I've ever put behind it. Pulls cars outa 2nd in 2wd all day.
@ALMIGHTYGARAGE Жыл бұрын
Chevy dude hitting the breaks ford never did wowwww
@justinpetitt3352 жыл бұрын
“DAREN IM ON YOUR JEEP” best video intro ever
@colbye12052 жыл бұрын
This comment made my day today. Thank you good sir!
@montelmitchell97043 ай бұрын
With geared timing, very so reliable, the inline 6 for put out it is one of the best engines ever, I just got a 1986 Ford pickup with that engine and it's awesome.
@jacobhazelwood2857 Жыл бұрын
I got a 1996 ford f150 inline 6 4.9 and I heard there really good at pulling my maintenance guy that’s working on it right now says he pulled a 18 wheeler out before got the truck 2,300 great deal and 143kmils
@UncleRobsGarage3 жыл бұрын
Love how the a****** with the Chevy kept hitting the brakes so the Ford would not be able to pull him.
@sidefx9962 жыл бұрын
No brain cells were harmed making this video
@budderswag6 жыл бұрын
Well I mean shit when your .1liter away from being a v8 I'm not surprised them ma got some torqe
@joex34063 жыл бұрын
It’s not .1 liter away, it is 2 cubic inches away from the 302
@budderswag3 жыл бұрын
@@joex3406 I was referring to a 5 lier Ford v8 nimrod which is a .1 ?liter didrence
@GeorgiaRidgerunner6 жыл бұрын
do this again but both trucks got new tires and better drivers... guarantee both trucks will go home on a wrecker as neither were intended for this sort of abuse... honestly i am a ford man i love em cause thats what i had growing up ..ive even had a 300 inline 6 theyre called the big six literally cause its a huge fucking 6 cylinder forgot exactly what the torque numbers were but its like 6lbs less than a 351w in the same r.p.m. range for the average man the inline six will do everything ask of it and never grunt...
@jaredromero9549Ай бұрын
yee yee that's what I'm talking about
@BrownBomber92181 Жыл бұрын
That Ford 300 only made 260 lbs/ft of torque, but at a diesel low rpm of 2,000!
@hollywoodsbest47622 жыл бұрын
I got a heavy duty clutch in mine. I would of dragged that 350 till he blew up
@Wildstar40 Жыл бұрын
Too bad the Ford did not have a C6.
@stellingbanjodude Жыл бұрын
The thing about pulling, the truck with the most power may not win , it’s all about weight. Generally the heavier a vehicle is, it will be harder to pull against.
@durangojohn7142 жыл бұрын
That was lame
@johnwilkerson2195 Жыл бұрын
I'm a Ford man
@davidjuarez18342 жыл бұрын
The Ford didn't even try he just held his brakes
@ritz8780 Жыл бұрын
bye clutch
@misaelsantiago3 жыл бұрын
Weak
@huntereury1585 Жыл бұрын
That inline 6 got 3:55 gears by the way
@dinorichetti2 жыл бұрын
I could smell it through the phone
@suprestoner2 жыл бұрын
Low range pull. Easy on the part numbers
@colbye12059 жыл бұрын
The clutch wasn't burned out. There was water on the truck from rain that day, causing it to smoke/steam when it drained on the manifold and exhaust. I do agree though, Ford did put a week clutch in the 300s
@Masterman50109 жыл бұрын
Colby Emily *weak
@colbye12059 жыл бұрын
Spell check, I first got a new phone thanks for the correction
@Masterman50109 жыл бұрын
Colby Emily No prob lol,I was startin to think that ford will win
@colbye12059 жыл бұрын
If the tranny was bolted down the day it happened it might have. But the transmission wasn't bolted down during the pull. Truck is still running and has 498,657 miles on the motor
@Masterman50109 жыл бұрын
Oh shit really? I'm am shocked it can sill run!
@alexhedgcoth14313 жыл бұрын
The 460 big block is
@spartanboss41896 жыл бұрын
I would love to see a Ford 300 versus a Chevy 292, Ford originally built the ford 300 to compete with the Chevy 292 back In the sixties.
@shackman95666 жыл бұрын
Ford built the 240 six before the 300 and it was a puller also.
@republicansareoffendedeasi8215 жыл бұрын
And the Chevy 292 would lose to a Ford 250.
@blairastleford3905 жыл бұрын
Lol wrong. Ford has had the 240, and 300 i6 in the f series since 1952, and the first gen 300/6 was built in 1906
@olblu87465 жыл бұрын
@@republicansareoffendedeasi821 Do you mean to say 240? I've never heard of a Ford 250.
@republicansareoffendedeasi8215 жыл бұрын
@@olblu8746 no I meant 250 4.1 liter 250 cubic inch straight 6.
@hilljackzack72844 жыл бұрын
They can’t move one another which tells you that either the ford slant six is a badass or the Chevy 350 is just weak. At the end of the day I’m still a dodge guy so I’d say that the 350 is just weak as hell and end of story.
@Matt-re9oh2 жыл бұрын
Rip clutch
@rodneygalindo30937 жыл бұрын
And the fact that he probably needed a overhaul on the entire truck it would probably pull the Chevy then
@rodneygalindo30937 жыл бұрын
If that Ford had some more power it would pull that Chevy but it also weighs a lot more so good luck that's why it was a stalemate
@traxxasrcfun5 жыл бұрын
Not about power, more like dumbass driver
@jerryl.roberts86216 жыл бұрын
3/4 ton vs 1/2 ton tug pull which on will win hahaha
@miguelrocks10009 жыл бұрын
"i think i burnt ma clutch" You think? lol I cant believe why ford put a weak clutch on the f150's
@coler42129 жыл бұрын
Do you even read the description
@baconneggs24065 жыл бұрын
Right the clutch can't handle the torque from the 300s
@jjjghbbh76466 жыл бұрын
Funny how a stock warn out Dodge 225 pulled the 300 but a 350 can't? Something wrong there
@dylanclay27413 жыл бұрын
And after it did the dodge transmission probably needed replacing
@fsb_-bf3th5 жыл бұрын
This is more of a "Im gonna hold my brakes till he spins then i'll pull" type of video.
@tomsfruitstand68217 жыл бұрын
a 305 would have been a closer match.
@Mr666Rev6 жыл бұрын
TomsFruitStand no it wouldn’t. A 305 V-8 vs a 300 L6 is a guaranteed win for the 6.
@1manshop3355 жыл бұрын
Inline 6 all day it will walk all over the pissy 305
@Quint18363 жыл бұрын
@@Mr666Rev for sure. A 305 wouldn't pull a greasy string out of a cats ass
@zakkcooper14564 жыл бұрын
Best Ford engine is a 302 period.
@mrgreyproductions6 жыл бұрын
F.O.R.D Found On Road Dead
@sweetwolfasmraudio67262 жыл бұрын
The chev had tbi so that was a disadvantage but I'd be curios how one with a straight carb would do
@exxusdrugstore3008 жыл бұрын
I think the final judgement it simple here; That 300 I6, no matter how torquey, has less displacement and two less cylinders than the Chevy, so considering that and the shitty driver I think the Ford put up a decent fight but it was obvious from the beginning who was gonna win.
@sylumgand8 жыл бұрын
+Just Here For The KZbin Yep the 300 I6. You're comparing a truck that was built to pull/tow to one that wasn't. The Ford held him back and started going forward before he stood on the brakes. I've seen the loads a 94 F150 with the straight six hauled first hand, weight that you should only pull with an F350/F450. And the only part of the truck that protested were the brakes. It was a nursery truck that hauled trailers stacked with BnB, with enough weight in the bed that before hooking up the trailer it was on the bump stops. And it did that weekly for a few years until we got an Isuzu panel truck. It hauled tractors, backhoes, anything that could fit on a 20ft trailer.
@jimmieconley6518 жыл бұрын
+Just Here For The KZbin the 300 was offered in the f350 because of its pulling capability, but most people got either the 460 or 7.3, in reliability the 7.3 and 300 are on par with each other
@larryharbin68028 жыл бұрын
Displacement and Cylinders has nothing to do with the torque of the l6 300 and the 350. That Ford would yank the axle off that Chevy if the driver of the ford had dropped that truck in gear and hammered down. The Ford l6 is LEGENDARY for its torque. The 350 is not. Higher RPMs on the 350 will give more HP, however it only then begins to get near the torque of the L6. The L6 doesn't do well at high RPMs (That being the l6 300. The l6 200 - 220 however can yield up to 585 HP when build right). There is a reason that the Ford l6 was used on trucks, buses and tractors for over 30 years. (Also, the Chevy rear end in that particular truck is pure shit).
@seansims60048 жыл бұрын
Just Here For The KZbin neither of them won though, they ended in the same spot. ford driver just couldn't drive for shit.