I've had the c7 Grand Sport and the C7 Z06. Now I have the c7 2014 stingray, not the z51. I see on line I can get the A&A SUPER Charger for $5750. They r say to get someone to install it on the Labor and tuned is around $2,500 I was wondering what is your cost and were are u located. I like your video. U R the only one who I've see that is Detailed on your videos that makes it so easy to see and understand and I'm 60 years old and seen a lot of videos on corvettes so way to go 5 star. My name is Johnny Juliano
@kookduk8 ай бұрын
That’s not a bad price especially if they are adding map sensors and doing a full oil change. It would be better if you had a dry sump but it’ll do w or w/o, nice vette!
@alphasaiyan5760 Жыл бұрын
Needs a cam , long tubes , and x pipe duals it’ll be making over 650 hp maybe even 700. Awesome video 👍
@zaytovenng35768 ай бұрын
Nah needs built engine
@RandDCustoms2 Жыл бұрын
My buddy added the Procharger To his 2016, loves it. But strangest thing it knocked the alignment off on the rear tires. Can’t keep rear tires on it.
@eekay36462 ай бұрын
What kind of wheels are those? I like. I have a C7 Z51 and am having a hard time finding aftermarket wheels (without modifying the car) for my narrow body C7. It seems like they only cater to wide body C7s....
@XavierDaly06 Жыл бұрын
Killing it man!!!
@YoursInYeshua Жыл бұрын
Good job! How many pounds of boost?
@sircasm657811 ай бұрын
I had an A&A on my C6 Z...607 rw comfortably
@revolutiongt78059 ай бұрын
How much for supercharger kit install and tune. I can bring car there
@ghostrider46724 ай бұрын
I have c7 procharger stock motor and keyway on crankshaft broke. You upgrade keyway?
@iriemars812524 күн бұрын
Did the install throw. CEL?
@motorgearhead Жыл бұрын
Had A&A vortec V3 si on a 98 C5 A4 3.42. A&A makes a great kit. Belt wrap is very good. A&A mounting bracket is super solid. 9 lbs boost stock ls1 except upgraded springs and 60 lb injectors. Nothing bad to report about the kit. Kit was $6500 in 2005. I had mine Dyno tuned and picked up 170+ wheel? 474 wheel & 443 tq through RPM A4 trans. You will need more tire… I put widest wheel & tire that would fit. 325’s on the rear & 275’s front. Your brakes will likely be ok if your not tracking or crossing the car. 0-60 pull 1998 C5 Corvette 0-60 mph in Under 4 sec kzbin.info/www/bejne/rJ6kinqurN2kmdk
@failingup49076 ай бұрын
The guy doesn't take care of that car. The dash is coming apart, the passenger door panel looks like it is coming apart. The drivers side inner fender is separating.. WTF! I have a C7 Z51 with an ECS supercharger and seeing that car is an embarrassment! That supercharger is going to tear that car apart..
@cozy289710 ай бұрын
he man my c7 got a c7 z06 supercharger in it with stock everything and i just bought kooks headers, just asking how much psi can a stock c7 handle ?
@jeremyarmand56318 ай бұрын
Do you have the part# for the green belt that you used with this kit? I’m fixing to purchase this kit.
@turfguy4207 ай бұрын
It comes with kit
@stevenlynch99478 ай бұрын
nice work
@youbetoomuch Жыл бұрын
Another gooder :)
@corybodnarchuk96305 ай бұрын
Does this supercharger have the heritage package on it?
@sylvesterromero4710 Жыл бұрын
Are you in Texas
@jonbossz7190 Жыл бұрын
How much something like that cost parts and labor installed
@luisgariel2540 Жыл бұрын
What kind or brand did put it in? Thanks bro
@penjaminc Жыл бұрын
A&A
@specktric2 ай бұрын
What wheels do you have on it?
@stevengober4757 Жыл бұрын
Where are you located? How much to supercharge a 2010 charger rt?
@samuelShadrick-u8m10 ай бұрын
How much to install the same on my 2014 c7
@matt6951 Жыл бұрын
Want to put a cam in a lt4 swapped suburban?! 😅
@thekingsthoughtoftheday396526 күн бұрын
what did this cost?
@stevenlynch9947 Жыл бұрын
548hp at rear wheels is good with stock everything else.
@dannyrichardson14436 ай бұрын
Where are you located.
@just-a-6176Ай бұрын
i wonde what hes whel set up is
@gastondraco59064 ай бұрын
Poor excuse for a owner letting that car deteriorate like that
@novaorbitdragon Жыл бұрын
13 afr at limit 💀
@rockwoooood6350 Жыл бұрын
How is your tik tok career going brotha
@ramtuff068 ай бұрын
this is not smart actually its setting up for bad deal.......you know you have cast pistons.....you know you have 11.5 static..... you know your running outta fuel at top end with lt1 pump/injectors (E85 is a solid NO) so your riding on the knock limit cold....pushing oil with blow by after a while will make KR worse or your gunna pop pistons.......looks like you do good work but just because the customer wants something its your job to advise them in a properly if they know the risk then your good....but you gotta tell em.....but prolly gunna get deleted so whatever man.
@jackstandbuilds8 ай бұрын
My customer is aware that he has 0 room as of right now for any changes, we have talked more about further mods to the car to get it close to the 800whp range and that would consist of fuel system/ cam/ forged rods and pistons/ headers/ e85 . Thanks for your concern I completely understand you. If it was your car I was building, we could build it your way. In this case my customer only wanted to install the A&A and no other mods.
@ramtuff068 ай бұрын
@@jackstandbuilds Thank you so much for the very professional response, and I apologize for being rude in the initial post, I but I've been burned so many times over the years with "the business" side of things that I left it. I mean your average customers change over long period of time but majority are insecure about what they actually want and managed a shop my self at one time I was too nervous to loose a client and compete price risking my rep.
@kevin-qc7zv10 ай бұрын
It would have been much better if you didn't edit the video
@pressinpickle345 Жыл бұрын
I'm sad you channel has died. I enjoyed watching your videos when you built s**t in your driveway.
@jackstandbuilds Жыл бұрын
Channel sort of died, I have a bunch of videos in my phone to edit and post but I don’t have the time now that I’m building everyone’s cars and balancing family
@pressinpickle345 Жыл бұрын
@@jackstandbuildsoh😢
@pressinpickle345 Жыл бұрын
😂 Corvette being a sleeper
@jackstandbuilds Жыл бұрын
I know hard to fathom, but stock stingrays are super slow! And this one doesn’t sound louder than stock!
@alphasaiyan5760 Жыл бұрын
Yeah man. They are slow stock. Your cts-v stock would smoke that vette. I had a gto cammed and tuned and I could smoke vettes all day long with that car.
@lexthelonewolf1864 Жыл бұрын
@@jackstandbuildsDid Andrian delete his channel?
@gygygbunknbhgyvtc Жыл бұрын
@@alphasaiyan5760 $500 for things that never happened.