Stole this exhaust from a famous Bonneville race car... Vic Edelbrock 👏

We ordered some flexible exhaust tubing from our local NAPA store to see if we can replicate Vic Edelbrock's famous Bonneville salt flat race car. As soon as Bad Chad saw this car at Galpin Ford's custom car museum in California he knew he had to steal the idea. Is it 100% practical? Probably not. But, it's 100% cooler than dangit. We just need to make it work 👏
If you enjoyed watching ⬇️
subscribe, leave a comment and hit the like button
/ badchad
Purchase merchandise here ⬇️
www.hiltzautoc...
Follow us on social media ⬇️
/ badchadcustoms
/ badchadcustoms
/ macintyrejn
/ ___jolene
Mailing address ⬇️
Hiltz Auto Co.
RR3
Canning, NS
B0P 1H0
Contact us ⬇️
[e-mail]
#badchad #ford #custom #paintprep #paintingcar #painting #suspension #lowered #fender #roofchop #barnfind #hotrods #customcars #carshow #hotrodcruise #hotrods #cars #classiccars #badchadcustoms #rustrepair #car #carshow #hotrod #hotrodsandmusclecars #trucks #automobilerepairshops #rust #rustmobile #wheels #antiquecars

[@raystackon5113]

I've never had a bad comment to make on any build... until now. This is not a good thing. Take the time and build some darn headers, man. Jeeez

[@brettemerich3237]

I know Chad would never buy a set of headers

[@scubafever282828]

But he'll spend HUNDREDS of dollars on flex pipe and the WRONG radiator!​@brettemerich3237

[@rogermcdonald1607]

I won't put that garbage exhaust on a lawnmower and I wouldn't put plexiglass on anything that you are actually going to drive down the road. There's a difference from being frugal and being not very smart!!

[@scubafever282828]

Have you listened to his daily grammatical mistakes, of course he's not very SMART!! @rogermcdonald1607

[@marykay9188]

@@scubafever282828 for a guy not very "smart" they seem to be doing something right they seem to live ok. that you can not dispute

[@scubafever282828]

Wait till you see what they look like AFTER they heat up from the exhaust!! 😮

[@marykay9188]

look even better not so shiny the look they are going for

[@dominictedesco5966]

No offense, just get exhaust manifolds to fit it so you only have to worry about two exhaust pipes instead of six, it would probably solve the driver side issues.

[@charlesvalentine3153]

I remember using this flex pipe back in the fifties. We used to split the manifolds and the flex pipe lasted about three months and then had be replaced.

[@markwells3759]

Vic Edelbrock put his name on most everything he sold, it’s a shame that people still can’t spell his name.

[@spamanator666]

I used to find all kinds of dirt cheap Edelbrock old vintage speed parts on Ebay due to nobody knowing how to spell his name. Used to search Elderbrock, Edlebrock, Edelbrook, etc etc....

[@GregoryBamber]

Hate to say it but if that flex pipe is that thin they will burn out in no time.

[@GeraldBoone-qy2yt]

It is usually galvanized steel and lasts quite a long time! Get it right first time!

[@MarkSmith-tw2ip]

Most like it will never see the road.

[@michaelhamm6805]

@@GeraldBoone-qy2yt No it doesn't...read the reviews on the crap. Start with Canadian Tire....

[@ynotthekiwi8429]

Someone better tell caterpillar quick then that its crap, they use it on 400hp gensets and have for years

[@proar1368]

we run them off our generator out the 5 ton truck, going strong five years

[@quantumreality8844]

I used that stuff once when I was a teenager and didn't know any better

[@TheToolgypsy]

Where to cut them off to make them look good?hmmmm wait I got it,cut them off at the manifold😎

[@DaveCutler-w6m]

@@TheToolgypsy That's funny.

[@David-n9n6w]

I can guarantee you that the flex pipe will not take the heat of the heads it will burn like a pop can before long.

[@marykay9188]

Ok you said the same thing on yesterdays video. keep saying it and you will believe it.

[@GregoryBamber]

5he time you take messing with one side and getting them straight you could build proper exhausts for both sides.

[@chrishay8385]

Omg dreadful .Great stuff,you never fail to louse up perfectly good hot rod projects .

[@alanligus6083]

The problem with flex pipe is once it gets a little rusty they split open and unravel. Any movement splits them open when rusty.

[@richardsmith3905]

The exhaust flex pipe is stainless steel. I have used it to build custom exhaust. I have some on my 1984 Mustang that I used to replace the Cat Converter. It's been in for 15 years and it is as good as new. I was able to slip it off when I replaced the Muffler 2 years ago.

[@funny0000000]

I know Chad is very sensitive to criticism but this is one time when I think he messed the whole car up with that exhaust. People are going to laugh at you for this one big time!!!

[@GregoryBamber]

Sorry Chad but I think 3 into 1 side pipes would look much better.

[@rudiwendt5278]

Plus save a lot of flex pipe. I was thinking the same thing.

[@bob9864]

Or a set of zoom tubes

[@MJ44163]

Should run a single rusty pipe from the headers. Wrap the headers. Safety First

[@MJ44163]

@@rudiwendt5278 rusty single pipe

[@rodwilliams1381]

It's obvious to me that a set of lake pipe would make the job easier and neater. 3 into one's from the motor then the lakes under the cab. Haven't watched video to the end yet but I am wondering about mufflers ?

[@scottywalker701]

lets start with the name association. Vic Edelbrock is the correct name your attempting.

[@varioushardcore]

No. It will be known from this day on as Bad Chad Flexible Exhaust Pipe. Greatness has it's privileges.

[@cliveburton8992]

​@varioushardcore😂🤣👍

[@lwoody8702]

Is that like Pepsis glass they installed for windows .lol

[@davidfullerton3344]

I've enjoyed every episode until this one ,the rush to have a visual constantly for the end of the episode detracts from.the whole programme and just leads to error after error ,I really enjoy the programme but had to turn off this evening as it became so cringe worthy, I'd rather the exhaust took 3 episodes and was done differently with more thought rather than the haphazard way that transpired 😢

[@rorylackey7116]

Bull in a china shop, that’s his style?

[@varioushardcore]

You were okay with the episode last week where he willy-nilly cut down the vintage grill till it was garbage and still with no resolution? You want a laid-out design and plan? A sketch perhaps? That's for those rich, big-budget channel garages. This is the Great Bad Chad On-the-Fly!

[@scubafever282828]

@@varioushardcore he who fails to plan....

[@joelav7222]

Because he can do whatever he wants, it’s allowed and it’s fun.. it’s a rod that he doesn’t want to spend money on. Some people just don’t get it.😮😮

[@marykay9188]

@@joelav7222 They really don't at all. the whole thing goes right over their heads. it actually baffle's their minds.

[@GraemeEdwards-c5i]

Not to worry as it will never get driven and must be due to be pushed back into the shed with all the others but are any of these cars road legal ,just content for the business.

[@azraygun]

Bingo! I don't fault Chad and his business partner for these conceptual builds. Chad gives us subscribers: useful design ideas, hands on skills, car fabrication education and he helps Doug and Nathan make ends meet...The pipes are like a "fly in the soup" though...I give the video a 'like regardless of my opinion.

[@darkhorsegarage9623]

Gotta say I hate the pipes.

[@ScottGiordano-ey4pw]

There you GO !!! Knuckle Head garage at its finest. once again, let’s screw up the project with some sidewalk mechanic mentality !!! Unbelievable

[@richardsmith3905]

The flex pipe is SS. I have used it to build custom exhausts. Works good a lasts for years. The appearance on this Rod is a judgement call after it is completed. Chad will make it look the best. Thank Chad for all of your sharing.

[@kimber1958]

Dear Jolene, I think you need to get a fast cut CNC table you could design parts for Chad builds. He’s obviously not gonna catch onto the programming but I’m sure it’s something you could do. It would be way to contribute to the build. I feel really strongly about this, I think you would do a fine job for instance the exhaust system currently being worked on you could hold all pipes together and fasten them to the body. With a very clean look.!’so contact fast cut CNC tables. I’m sure they would help you get started.

[@rodneymahan1307]

YOU WILL HAVE TO BE REALLY CAREFUL GETTING IN AND OUT OF THE CAR SO THAT YOU DON'T BURN THE SHIT OUT OF YOUR LEG ! THAT'S WHY ON SIDE PIPES THERE IS A SHEID TO KEEP YOU FROM GETTING BURNED !

[@emersonb5764]

Easy there caps lock guy. Sometimes we get burnt. It heals. Sometimes it even leaves a bitchin scar. Small price to pay for a cool looking car

[@scottrob60]

It reminds me of a smaller dryer vent tubing!

[@marykay9188]

@@emersonb5764 Im glad he yelled it now my neighbor knows too.😆

[@ynotthekiwi8429]

So i guess you are another keyboard jockey that types before listening, in the opening two minutes Chad said if he needs to shield them he will.

[@azraygun]

I would not have the nice young lady in that car without a seat belt and windshield wipers...those pipes will burn your legs if your wearing shorts.

[@tuberdave2]

Vic Elderbrock ……. too funny.😂

[@Rubno3]

You can buy a set of Ford flat head headers.fits 1937/48 $160.00 Amazon.Whats up with the stove pipes?You lost me.

[@marykay9188]

you are correct he did lose you!!

[@rickdaystar477]

Header/ exhaust pipe length has a direct effect on performance. " Tuned headers" does not apply here. Come on guys cut that junk back. Repeating a bad decision don't make it a classic.

[@JohnBravo925]

Chad you really attracted the haters on this one and I am one of them 🤣🤣🤣

[@josephdunn845]

Had to FF this episode, the exhaust pipes are just awful 😢

[@NickDanger1957]

Please explain again how this is your best chop ever!

[@philipbennett2973]

Those pipes will never get hot sure the car is only going to the back yard anyway. Not like we are going to see one driven to the Moncton Nationals

[@tims1552]

And i thought the glass work installation was bad it just get worse!!!

[@varioushardcore]

Now. Now. You forgot the grill fiasco.

[@duconce]

Welcome to Chads World, clusterfuck special

[@scubafever282828]

That's Pepsi glass!

[@LordHumungus-eg2dw]

Wait till they try to run that radiator

[@lwoody8702]

What you don't like Pepsi Glass . I'm not sure if it is legal to use for legal road safety check.?

[@fredtmatsumoto]

That is one of the best exhaust systems I have ever seen on a flathead , I think that type of construction was used in the fifties so it's true to the era and just looks fantastic, of course the flathead V8 has the best sound of any V8 and I can't wait to hear it fire up for the first time. Job well done you and Jolene.

[@The_Kman]

I can't help but think those hot exhaust pipes are going to burn someone as they enter/exit the car.

[@billychristopher9524]

That's part of the fun of a hot rod😄

[@ConfusedHot-AirBalloons-xu7ns]

Or melt

[@brucetodd8993]

Spray header paint it would look good

[@DaveCutler-w6m]

​@@billychristopher9524 Nothing like a third degree burn to start a fun day.

[@redneck4life127]

Looks too cheaply made..I'm bad chad person all way but I personally don't care for look of it..with some real header tube's and exhaust the way u have it would of looked nice but not that flex cheaply looking pipe..just honestly THE CAR deserves better then that my opinion anyways..so many people would give whatever to have that car and to do it a respective kinda way..now something on a racecar then who cares but not on a HOTROD

[@davidlongmore2689]

I love the vehicle creations that you make, Each one is so unique 👍👍 Well done you 👍👍 Keep up the good work You are creating a collection that if I was to visit Canada I would love to come to visit 👍👍

[@marykay9188]

each 1 a vision in his mind and what makes him Happy the way it should be.

[@brettemerich3237]

Just think Chad I think you wanted to see how far you could go with the exhaust design to see how many viewers disliked it

[@KellyVeasey-nc3po]

Looks like $#:t, put some headers on it. That’ll be a rattling vibrating mess !

[@JESUS-POTENTATE]

You act like the car will be running and driving. It will never go down the road just like all the other cars. This one is no different.😅😂😊

[@idlabi]

No comment… Just belly laughs!

[@marykay9188]

the bike hauler did, and that 50 ford is getting close. wait is all I say then speak

[@maynardjjj]

Buy a set of ratchet wrenches! Drives me crazy watching you struggle with the wrong tools.

[@budwebster1031]

Why not flex pipes, has to match the chrome tape and plexiglas windows

[@DouglasSellon]

Sarcasm spoken here.

[@tomsawyer247]

That's pepsiglass

[@carlwilcher4109]

To each his own... but that's about the dumbest looking exhaust I've ever seen! Just my opinion.

[@blairswaney8862]

Don’t cheap out with flextube exhaust

[@sjdstudio3257]

I get it…it looks cool

[@steveanderson2881]

I would not be using flex for exhaust never!!! That's fucking ugly!! Use pipe to build that header!!!!

[@darrellmccauley8039]

yes

[@darrellmccauley8039]

yes

[@kbschulze]

This is hotrod in its purest form. Using what you have and building what you want. Hows it ugly if it’s what makes him happy. He isn’t building it for you.

[@slvrktman7824]

NOOOOOOOOO……

[@Jodycleary190]

Man that stuff looks like it’s hard to work with!😊

[@CurtisRoyArt]

I remember those early Edelbrock hot rod days. You have achieved the look! When the pipes get their patina, it will be perfect.

[@jimwhittemore1610]

Whatever makes you happy and have fun in the process

[@lloydfriend1060]

Here a clamp, there a clamp, everywhere a clamp clamp.😊

[@roypowell3450]

👍👍😉

[@vinceburling4613]

You could weld the flex to the header stubs, find some tube that fits over the outside of the flex,cut it inti 1" rings, like egg rings. they can be positioned into what ever lay out you desire, in a row or triangle. the rings can then be welded together. the pipes will be free to slide through the rings. would make it easier to bracket off frame sides.

[@tims1552]

Coat hangers and hockey tape should be fine to secure the custom pipes and the reason being is

[@varioushardcore]

Facts!

[@varioushardcore]

Rocker Guard that sum-a-bits.

[@roypowell3450]

Oh yes! hockey tape, what's happened to that...🤔

[@brentbrown8393]

Cheer up Chad. Mama said there'll be days like this, there will be days like this, mama said.

[@davefranke5968]

Just love the look of the build, can't wait to see you run down the track. Thanks for the content love watching the build

[@yourface8698]

Those pipes look absolutely amazing. It makes the whole race car

[@mikethompson9015]

I honestly never remember ever seeing any flex pipe in bundles hanging off any cars . Chad is talented enough to build headers that collect under tge fire wall and out the back . Flex is high . Maybe the car gas to be kicked out the door . With a little money the car could be pushed over the top .

[@jameswolf7811]

Please don't let everyone's negative comments bother you, I myself have used flexible exhaust pipe for several years when I was first starting out driving because of the affordability of the pipe. I always had very good luck with it for daily drivers and it last for a long time , and did not leak at all until it started wearing through. From my experience the clamp placement is very important because if the clamp isn't completely over top of the solid pipe underneath you can actually cut through the flex pipe when tightening.

[@BigBlock-wf3mh]

I really love this build, it’s old school, the way it was, working with junkyard parts, no high-end parts or dollars, brings back memories . 😊

[@brianfostar8180]

Exactly right there that comment

[@tomsawyer247]

This is almost as comical as watching him soldier.

[@waynejennings-h4d]

In my experience (decades ago) that flexhaust mostly just unraveled,seams opened up, wherever it could vibrate or flex between supports. There once was a flexible exhaust with stuff like asbestos in the spirals ( I dunno if it was asbestos BTW but,,,once it got heated several times it got ridgid and wasn't bad for use as exhaust and tail pipes.

[@mikeflahart2784]

I like the long header idea just like chad made. If the flexible pipe dosen't work solid exhaust pipe will I wouldn't go without a one off custom exhaust like he came up with. Definitely wrap the pipes as much as possible with some of the piping exposed to give away what the exhaust is. Just grill fuel tank and wireing and that rockets ready for take off. Can't wait to see an inside veiw of the car driving.

[@cameronfrench1770]

Hey Chad, keep doing what makes you happy. You do more in a month than what most do in a lifetime. Onya mate !

[@donlandenberg8126]

Has a dry lake look to it. I like it. It's not a daily driver it's a drag car. One thing that could really set it apart.... put Jolene in it. Thanks for sharing with us.

[@dannymclendon2337]

More lipstick on a pig, hose clamps, not u bolts!

[@LordHumungus-eg2dw]

It doesn’t even matter at this point. Gets worse every day

[@danmasters7558]

Bad idea and you spelled his name wrong.

[@johnwade5747]

Gates makes a hose clamp with convex washers back to back and put constant pre-load on the pipes. Plus they’re stainless steel and used on semi’s quite a bit for turbo hoses. They’re not cheap but they would be worth paying the money because they have constant pressure even if things settle in a little bit

[@davejday]

3 into one tail pipe. To keep off tires. Would make it look good.

[@clifc6351]

Haste Makes Waste. Waste of time and Material. Thank You for sharing your honesty; gonna have to throw away this one.

[@phyllisbenfield6703]

sonny benfield- flex pipe was available back in the 50,s at most auto parts stores.. state eventually outlawed them because of leakage problems and early burn out. maybe use them as patterns and make hard pipes..

[@marykay9188]

Exactly right Sonny, and why he is using it to make the car look as it was built in the 50s by someone with limited funds. a period correct race car of sorts.

[@ivanstewart3891]

I would love to see half of the people who comment on this what their cars look like lol I love the idea because it’s your own and s got a great rat Rod custom look. Who cares about function or how well they will last they are different cool and cheap plus it’s just a mock up quit bashing things before they are finished when you aren’t putting in the work. Is ok to have an opinion but don’t bash other peoples ideas that’s what’s wrong with the world. But to each own I dig it and can’t wait to see the finished lol love me a badass patina hot Rod

[@grantscrimgeour1848]

Why not take the headers off the "Canning Kid" (your '32 Roadster) and then get Nathan to give you a hand to make duplicates for this build? Sorry, but I really think that flexible tubing will last 5 minutes once it gets heated up.

[@tienierabie748]

I like the exhaust system. Looks cool

[@bencrisp9776]

Me too

[@ClydeTenney-ub9lx]

A guy has had too many wobble pops

[@shaunemunday3694]

Started as best build yet then on to shit glass headers going from backyard builds to junk yard builds

[@LordHumungus-eg2dw]

Exactly. I really liked this car at first but it ain’t what it should have been

[@TOMJACOBS-b2m]

That's going be ugly

[@claudeperron8197]

Only one thing uglier than a Flex pipe, and that's three!

[@raystackon5113]

Easy doesn't make it right

[@Joe_M-]

@@raystackon5113 it is not about being “easy” It’s about being “nostalgic” era correct He full well knows and understands it’s not a good exhaust and isn’t going to last etc… He’s simply copying what he’s seen on a vintage original build to keep the theme going if the build

[@beekeeper213]

No once it heats up it'll match the car

[@badgascoupe]

@@Joe_M- vintage original plexiglass!

[@Francis-r8m]

About 75 years ago I saw a '32 Ford High Boy modification made by Roof Engineering. One of the mods that I notices, was the four exhaust pipes. They were made with the middle exhaust ports each feeding two pipes. The inside and outside exhaut ports were formed into single header and each fed the remaining two pipes. I don't remember what kind of muffers it had, but it was quiet.

[@shake-the-earth1]

Chad looks great. Make some clamps out of motorcycle chain. Use your idea. You probably didn’t even know you said it. I like the chain link idea for a hanger. Thanks for the video Jolene.

[@johnsabo2376]

Ok That’s just ridiculous now. Everyone should unsubscribe maybe he’ll come back as a car builder and not someone who just wants KZbin money. Sell the vet and get some shop supplies and a workbench.

[@robertstanley629]

I just unsubscribed

[@johnmcalpine8903]

Me too

[@marykay9188]

actually the sub count went up to 319K up 1K

[@RennieBruno]

Its obvious you have never used flex exhaust, they get Red hot and bunching them together makes it worse. I'm sorry but that looks so amateur, and the time you used on the Hot mess you could have built real headers , a 3 in one pipe system. This car wouldn't even come of the 1940s category JALOPY Sorry this car was a waste of time and money, clad it was yours.

[@varioushardcore]

Research and know-how aren't for innovators like the Great Bad Chad. Down the road, they'll be selling it as Bad Chad Flexible Exhaust and you'll be first in line at O'Reilly Auto Parts to buy it if you know what I'm tryin' to tell ya.

[@RennieBruno]

@@varioushardcore Not likely I build traditional hot rods,. I love Chad, but he always says build with what you have, well this Junker had a lot to buy to make it a Junker. But it looks like fun!!!!!!!

[@RichardPearson-jo6hw]

Boy I can see burnt legs right now

[@franciscovalenzuela1174]

How about make a section of perforated heat shield where it crosses under the door kind of like what a Shelby Cobra exhaust does.

[@bryancostlow8508]

I personally like the look. However, IMO a 45° cut at the rear would look better. Just an opinion. It's your car and your vision

[@varioushardcore]

He might keep cutting till they are too short or there's nothing left. I think he should have braided them.

[@lloydfriend1060]

Everything is super, super strong until you add TORQUE, then things become super, super weak. Just saying.😊

[@loum.4377]

This entire build is pretty enjoyable to look at from start to where we’re at right now and I don’t think he’s gonna go for any long rides where he’s gonna put on more than 40 or 50 miles at a time with that being said this is gonna be a great car to go out and grab a coffee on a Sunday morningit’ll definitely get attention and turn those heads

[@marykay9188]

Love those pipes looks so cool and I am sure will sound AWESOME

[@IronheadGarage]

One thing to say. If you like it that's the only real thing that matters right! Keep on keeping on brother 👍🏻👍🏻👍🏻

[@robertthomas5590]

I'm glad Doug didn't drop your grill.😂 Good way to burn your legs...

[@hooligan_56labelle22]

The race car in the picture has stainless steel flexpipe exhaust. Last a lot longer. Your flexpipe is not stainless and will turn to rust and fall apart in no time and burn up

[@kabeer1478]

Beautiful idea ❤ You can also make them in a way that only one exhaust pipe is visible from side and at the end it should be cut at an angle so that the exhaust should be cut at an angle so that end is visible one after the other

[@RaymondGill-hi9ou]

I watched the building of the Ed Iskenderian TRIBUTE hot rod, built by Dennis Taylor in his workshop in Arkansas.. Dennis explains the why and wherefore of Ed's thought processes while building the original hot rod in the 50's. JUST as chad said recently "this is hot rodding"

[@AdrianCarter-x7z]

Cracking that headlight is a crying shame. So much haste😮

[@raystackon5113]

Cheapened the whole build 😢

[@kbschulze]

It’s not being built for you. It just a hotrod built how he wants it, hows that cheapen it. You don’t know what hotrod building is about obviously

[@mrkoldkanuck]

THAT LOOKS ABSOLUTELY DUMB IMHO!

[@plumbkrazy810]

CHEAP ASS FIX..

[@bftfcfua2946]

@@plumbkrazy810 Does not matter because it will never run

[@PeterDowd-r9b]

@@bftfcfua2946 Don't worry Super Nate will make it run, I would use the flex pipe off the manifolds and tie them into a 3 hole flange and weld it to a 3 inch straight pipe with a muffler included.

[@smokeyguthrie3289]

3 peace's of pipe slightly bigger then them pipes about an inch wide welded together like a honey comb or triangle. slide over pipes an add a hanger to each one as needed. could make a long section to run them thru and make a step/heat guard to keep from getting the leg burnt.

[@mischif5341]

I would have made some nice steal plates and put that drill press to work. Making 3 holes the pipes could have ran through. That way the pipes would hold straight after welding said plates to the chassis

[@stepho9999]

Large Jubilee Hose Clips...BOOM

[@mariocandido7204]

Ta ficando..lindo..esse projeto.. Congratulations

[@bencrisp9776]

Coat hangers would hold them together. 🧐

[@johngersna3263]

Good morning Chad, Jolene, and Fina. I've read a lot of the other comments about the exhaust and I say, build it the way that you want to. I do have a suggestion though. I think that being as how the ends of the pipes are so close to the tires, axle housing, and brake lines that I would point the tips out away from the car a little. Just an old man's opinion. God bless and have a wonderful day. 👍👍🙂

[@davidmiller2811]

That flex pipe has a special clamp.

[@Frontireadventures]

Remember Spiderman? Doc Octopus....has that Octopus 🐙 look. Cool.

[@Mart77]

I really love that idea. I'd love to hear it

[@jameswolf7811]

It's amazing how viewers don't realize or comprehend that your building one of a kind cars, literally works of art.

[@Charlee-w1u]

Don't think they are really drivers but automotive themed art.

[@marykay9188]

As with this 1 people dont have a clue its a race car for Jolene. they are going on about legalities and do the interior and all nonsense. like they are not even watching the video or listening

[@proar1368]

they want a finished interior, expensive bolt ons, expensive paint job, racing seats, custom glass etc…no idea what the build is all about.

[@BruceWitcpalek-ws1rh]

This car is cooler than dang it !! I really really like the way you built this car. No expensive parts and just what you have laying around. Sometimes that takes more skill than buying expensive parts and just bolting it together. Great job bad Chad and team !!