STOP- 2018-2019 Mustang GT WHEEL HOP for CHEAP- BMR CB010, CB005, CB762

[@StangMode]

Congratulations on the new Sponsorship- now get that Shoemaker tune!

[@Zander13Productions]

I need to ASAP

[@37oH55V]

His car and beard is coming on strong. I see a new contender on the rise. Sleep with one eye open bro.

[@tlcgtp]

Better yet, do a video about finding a Ford dealer that won’t void your warranty when you tune it lol I’m waiting to find one in my area that will work with me....not against me :)

[@mclarenjohnf1]

@@Zander13Productions May I make a small observation. Not everyone who drives a mustang knows what damage wheel hop can do, I know the differential exploding may not worry some but others may find the replacement expensive.

[@gzzzup1]

Mr Zander13... I just ordered BMRs CB762, CB010, BK081 and CBK760 for my 2017 Shelby GT350!!! I can’t thank you enough for the huge savings as well as free shipping. Keep up the good work as true die hard Mustang fans truely appreciate your hard work and dedication...SUBSCRIBED...

[@Zander13Productions]

thanks so much and you bought some goodies !!!!! thank you for joining the channel too

[@Jamko1970]

The best for wheel hop - Steeda complete (stop the hop) kit & Ford Racing half shafts. ALL hop will be gone!!

[@Eric79-f7i]

As someone who is totally incompetent when it comes to anything mechanical, I really enjoy watching these install vids.

[@Zander13Productions]

thanks, I love making them

[@DownSouthRacing]

I'm curious to see how much this helps Saturday! Can't wait!

[@Zander13Productions]

Should help keep things safe from braking

[@matpinato8892]

I know it's been 2 years but curious on what difference you found ? How did it work??

[@SHADOWBLACKs650]

I'm at work, your channel is running in full loop on my laptop at home 😁 .... Helping you with that KZbin sponsor money 👍 ... I hope my cats like your channel.

[@Zander13Productions]

Love it, thanks ❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️

[@SHADOWBLACKs650]

@@Zander13Productions HAHA. it's running now..

[@WHTES550]

Great vlog man. Congrats for the new sponsor and GL this weekend!! Cheers!

[@forcedair92gt94]

Do you have a Harbor Freight near you? If so, stop by and pick up some foam mats for your knees and back. A must needed garage addition for those who work on their own vehicles.

[@Zander13Productions]

I need too.

[@Djtonydraper]

Great info/video Zander. Good luck at the track this week.

[@derecksoutherforeal]

Stop the hop install I like it! Looks good! Haven’t worked on domestic cars my whole life but I’ve worked on dirt late models for about 15 years. Very informative for me not having a lot of familiarity with on the road cars.

[@tlcgtp]

Those BMR videos from under the car were amazing. I know I personally had a bunch of wheel hop my first time out to the track. Will be beefing up the rear end before I head back. Great video bro, only suggestion would be some kind of work light to better illuminate the areas you were working on. Was kinda dark in a couple spots but great info nonetheless. I too have been doing all my own work on my rides since I was a kid but growing up on a farm definitely helped with that. When stuff breaks, fix it lol

[@Zander13Productions]

yes, I do need more lighting. Great idea

[@ShizawnSanders]

7.62x51 is the bullet I would have used in comparison since its NATO. Used in M1A, M14, Browning auto, M240, Mini Gun, Scar, AR10 ext.

[@mattkent75]

Upgrading your half shafts will get rid of wheel hop I have the 1500hp ford racing ones. Very pleased

[@Zander13Productions]

One day I will do that

[@danielstacy9000]

Hi, thank you for your videos. Please could I have some advice, I have no mods and looking at BMR hardware to improve my car performance and handling. Please where do I start and what should I buy in order so I can continue to add overtime? 2015 GT. no mag ride. Many thanks for your time.

[@pattda1]

Congrats on the sponsor. Solid video, nice job.

[@Zander13Productions]

Thanks

[@19explorersport96]

Very informative. And gives guys options on which kit. Well done.

[@Zander13Productions]

Thanks

[@bybcous]

On your next install video can you get a good shot of where you are supporting your IRS

[@Zander13Productions]

I made several videos since this one. Hopefully they help

[@matpinato8892]

Do you have a video showing before and after wheel hop difference ??

[@goldpony]

Dang you got skills Alex! Making it look easy. Sweet vid!

[@Zander13Productions]

❤️

[@scottcooper7342]

Nice vid, tho I have installed the steeda...been happy...and I have no nvh. Good install vid...keep em coming.

[@ancientruinsofficial]

StangMode has Steeda Stop The Hop for the Black Mamba would you recommend this over the full Steeda Stop The Hop kit? You've driven his car is it too harsh of a ride for daily driver? It's crazy cuz I was going to buy the full Steeda Stop The Hop kit yesterday but I end up not purchasing it... now you have me interested in BMR...I don't no what to do now...

[@Zander13Productions]

I highly recommend BMR over Steeda. You get a better result for less money. the CB005 kit is a fantastic option. I am going to do the CB762 along with this CB010 kit

[@Zander13Productions]

Stangmode does have a very harsh ride with a tone of NVH. The guys at BMR can explain why their products are better too. Remember to use zander7 code to save some money. I personally have no interest in Steeda suspension, I like BMR better

[@ancientruinsofficial]

@@Zander13Productions I'll check out those other kitsch by bmr that you recommended I'm definitely looking forward to your review video when you have them all installed. Thanks😎🇺🇸

[@Zander13Productions]

Ancient Ruins Official absolutely 😎

[@SpeedAddict731]

excellant informative video! I love these videos! being a tech and a gear head that has worked on cars for years its always nice to see these videos done right.. I think when its done in a garage setting, its better than when I do them with a lift because majority of people don't have a lift... Great Job! look forward to seeing your car run this upcoming weekend!

[@Zander13Productions]

agreed and thank you. I like to show that if a mod can be done at home, even headers, anyone can do it

[@SpeedAddict731]

Zander13 I agree!

[@sandmangti7040]

Good video. Watched and I don't even own a Mustang. Interesting all the Metric bolts. Feels like I am watching GTI work.

[@Zander13Productions]

excellent, thanks for watching. we are all car guys here after all. I love them all

[@jesusbolivar9178]

Great video, looking at a new 2020 gt, but quick question, I plan on doing the full BMR locker if I get the car, other mustang owners say no need for the magnaride if I'm going to do that, would appreciate your advice

[@Zander13Productions]

Skip magnaride and order BMR parts instead. bmrsuspension.com promo code zander7 . Start with springs, CB005 and CB762 and go from there. 💪

[@TroyRossberg]

So I currently have the CB005 Cradle lockout kit, Do you think I should or need to add the CB010 kit with it? or would I be just fine sticking with just the CB005?

[@Zander13Productions]

You already have it. CB010 is included in the CB005. You could add the CB762 and get a big performance upgrade from that for not much money. Discount code on BMR website is zander7. Also vertical links will help too

[@stevelang26]

I have the BMR lockout kit and all the other BMR suspension for my car 2021 Mustang GT Premium

[@joshruby]

does this kit require a rear-end alignment? I was looking at the one with the brace and it does.

[@Romacitta]

Thanks for info, Zander. Nice to know wheel hop can be dealt with inexpensively and unobtrusively.

[@Zander13Productions]

oh yes!

[@ADDwithJTC]

Great video! Learn something new all the time. Didn't know the newer Mustangs had wheel hop. I only owned a couple 80's Stangs no hop. I have a 17 Focus ST I just replaced rear engine mount to eliminate wheel hop but have a ton of NVH. The take offs are so smooth now though it's worth it. My next ride is a Stang. Love watching you n Stangmode n some of the other guys. Great stuff for a car guy. Get to 10k subs man keep it up n good luck racing!

[@Zander13Productions]

❤️ Thank you, I love making these videos. BMR is awesome

[@ADDwithJTC]

@@Zander13Productions you're welcome! It's great you have a passion for it because we enjoy watching and learning. When I did my rear engine mount I watched a KZbinr first! We need people like you so we can approach a project without blindness. And also learn about how good a company like BMR is. You put them on the map for me and I will look to them first for suspension mods. Everyone makes out a winner. Good stuff brother.

[@bandit5.060]

Great info brother I need to pick that up for the bandit

[@hmackprotection1]

Congrats on the sponsorship. That’s the way to do it man.. hopefully Hellion will also sponsor you. fingers crossed 🤞

[@Zander13Productions]

that would be awesome

[@darksideemt]

Have bmr springs but the steeda irs kit. Definitely agree that this is a great mod even if you don’t race or plan on other upgrades. For the and the benefit it is well worth it. Good vid on it all

[@Zander13Productions]

thanks

[@mustangMike740]

Awesome vid, the wheel hop struggle is real!😁 congrats on the sponsor!!

[@Zander13Productions]

thank you sir

[@AlekseiBykov]

Do u think if u take Cb005 it will handle worse? im actually putting my bmr kit together to im gathering as much info as i can. thank you for the video. I had Steeda and loved it on my 15 GT now i wanna try BMR on my 18 PP1 :)

[@Zander13Productions]

Honestly CB005 will solve a lot. But I would highly consider the CB762 in addition. But you can always add that later. zander7 is your promo code to save some money on BMR website

[@AlekseiBykov]

@@Zander13Productions thanks man. :)

[@PinksGarage]

I currently have the Steeda kit installed. I am thinking about changing to the BMR setup in the future.

[@Zander13Productions]

Yes, I think it’s better. zander7 promo code will save you a bunch of money too

[@CKcommon]

Very informative video. I think I know where I'm going for my suspension parts now😁

[@Zander13Productions]

Absolutely. Please use the zander7 code. Save some money

[@troyvan6952]

This work on 2016 GT?

[@JayL-F1]

Thank you for your service!

[@hectorfr91]

Hay brother, do you know if they have an effective kit for 2012 Ford 6.2L SVT RAPTOR? I would greatly appreciate some feedback.

[@Zander13Productions]

I don't see that they do

[@fastfordstang13]

Thank you for the info Z13 👍

[@MichaelMacMUSTANG]

cb005 cradle lock out has NVH ask me how I know?

[@Zander13Productions]

I have never had NVH from a cradle lockout

[@MichaelMacMUSTANG]

difference in the kits cd010 and cb005, any kind of billet will enhance the harmonics, wait till it gets dirty

[@Zander13Productions]

oh yea, I never had the ones with the billet

[@scottcooper7342]

I have the steeda...similar to this one and 0 mvh...ask me how I know.

[@SupremeVsuals]

scott cooper because you lying

[@Themazcorner]

Great vid brother. Congrats on the sponsorship. I have CB005 on mine with the diff bushings kit. I think I regret the diff bushings kit. I believe it is causing some NVH :( not sure how much of it is the tires and how are the actual bushings...Could be the CB005 as well, not sure have not driven the car stock :D The rear end still feels loose at some points. Feels "spongy", like the rear end moves sideways (don't mean the tires are slipping). I have Magneride and FP lower springs :(

[@Zander13Productions]

I am not sure I would want to do the diff bushings at all. those are bound to transfer noise. what tires do you have?

[@Themazcorner]

@@Zander13ProductionsMichelin PS4S 295/35/20 on the rears

[@Mcperformance1]

FYI the bolts that hold the cradle up are "one time use streech bolts"

[@Zander13Productions]

I know, but no one ever replaces them.

[@benthem5364]

How about vertical links? I have a manual and was looking at this option recently... May have to use that code thanks

[@Zander13Productions]

absolutely, I will be doing vertical links soon. Yep, code zander7 will save some money

[@davidleca01]

Question could you use this kit and not have to use the other kits, such as the arm kit?..

[@Zander13Productions]

Yes

[@davidleca01]

@@Zander13Productions cool I have really nice 2016 GT/CS 5.0 moded. I'm loving BMR equipment, I'll look into getting that kit Thankyou..

[@Zander13Productions]

@@davidleca01 absolutely. Promo code zander7 will save some money for you too

[@davidleca01]

@@Zander13Productions copy will do Thankyou Sir 👍..

[@off-roadtimes8930]

Nice video. I need to get this kit for my car soon. On a side note that little tag on your spring means I made them. We make all the springs for the s550 cars.

[@Zander13Productions]

really, you work for the company making the springs? That is awesome

[@Zander13Productions]

be sure to use code zander7 to save some money

[@off-roadtimes8930]

I will thanks. Yes I make springs everyday. Mine may only be an ecoboost but I'm excited to see where I can take my 18.

[@Zander13Productions]

always! the mods never end!!!

[@glenncooper1893]

I was told with the stainless works Muffler you can pick up 3 miles an hour in the quarter.

[@Zander13Productions]

maybe?

[@DucatiDiaries]

Great job and helpful as always! Looking forward to the review of these.

[@Zander13Productions]

it never ends

[@c.wesduncan7821]

Hey Zander, Big fan! As you mentioned in the vid, not everyone is comfortable doing their own mods. I live in the Detroit area and expect to get my PP1 w/ magneride any day now. Perhaps you or one of your followers can recommend a shop in my area. Thanks!!

[@joefink105]

If I have the 762 do I really need anymore?

[@Zander13Productions]

The CB 001 or CB005 is a lot more beneficial than just the 762. The 762 is for big power regity. The other CB005 or 001 is for actual wheel hope

[@DarkWoodPicks]

My 17 EcoBoost has a lot of wheel hop can't imagine a GT and how much they'd slip

[@Suomyice]

I have the CB005 on my 17 GT PP manual. And it still wheel hop badly. I am running the Firestone Firehawk Indy 500 tires witch I believe are suppose to be good tires and I am running the stock tire pressure.( I have not so far played with the pressure) But it hops badly on the street if I take of hard and it doesn't recover until 3rd gear. If you don't let of the gas. It is the same on a track. The only pass I have done was with stock tire pressure. And it hopped badly there also. Afterwards, you could see the wheel hop marks on the track. I had high hopes when I installed it. And got disappointed it wasn't the magic cure I hoped. I started thinking if the 23mm wheel spacers I have were causing an issue. But I asked Justin the owner of VMP on there life KZbin show. and he said NO to that. Is this 762 to be an improvement over the arm in the CB005 and will they discontinue the CB005 arm and only offer the CB010 and the 762 in the future? I guess the wheel hop is a much bigger of an issue on manual cars. But I think many other factors are at play then only the soft bushings in the cradle. Take my car for exp. It has the level 2 cradle lockout but still hops every time when you smash the throttle in 1st gear even if I let it start to roll before I WOT in a straight line, and I am only running Power Pack 2 and a catback. I think there must be a movement also in the arms and possible the vertical link. So I guess to get a real solution the bushings need to be replaced in the a-arms, and that is pain to have to do a complete disassembly of the rear suspension. and have stiffer bushings pressed in an out. But I hope this work for you, Have fun and good luck with the shootout. Is the weather forecast good?

[@Zander13Productions]

The 762 is supposed to improve it ton loads over the standard cb005. How do you like the Indy 500 tires?

[@Suomyice]

@@Zander13Productions I think the Indy 500 are good tires specially for the price. Other then experience wheel hop that I am think is not the tires fault. They have performed fine. But maybe they shine better or gain max traction in a country with higher temps then I live in. I live in Iceland were hot is 60-65 F at best!!

[@mileshiles1287]

Great how to.

[@jessetolley3974]

Nice brakes.

[@Donesan707]

Nice install!!

[@TheFLKA]

Great vid! Keep up the good work. BMR FTW!

[@Zander13Productions]

😍

[@SJ-yd6hl]

Can the bushing inserts be used along with the bmr cradle lockout kit?

[@Zander13Productions]

Yes

[@kennethburton3056]

BMR is my go to for suspension. You know I got those boxes I gotta open up . 😁🤫😉. What was install time bro?

[@Zander13Productions]

install is about 1 hour. We need to do yours

[@kennethburton3056]

Oh yesss!!!!

[@NigelsModellingBench]

I'm sorry, but this kit is gonna add NVH, otherwise why did Ford go to the trouble and expense of fitting rubber bushings??

[@Zander13Productions]

No NVH so far at all. It is solid as can be

[@NigelsModellingBench]

@@Zander13Productions OK, I'm not gonna even suggest your lying!! I'll have to get me a set of those..

[@Zander13Productions]

@@NigelsModellingBench it feels just like stock but hooks a bit better

[@rimbam2250]

Glad to hear your not bias, lol

[@tacticalbt1023]

I got Bmr vertical links an toe limks no more wheel hop for me.

[@Zander13Productions]

❤️❤️❤️BMR

[@bravo33romeo19]

Why would you not do vertical links, Diff bushings., toe links, & IRS bushings w/ the 762? Drop the sub 1 time & done! Patience is the virture in acquiring everything...I understand, but spending the time to do it all seems easier IMHO. I'm OK to be wrong in my thinking, as I'm sold on BMR, but w/ mods.. $$$$ is always the issue. Just wanting opinions.

[@Zander13Productions]

I am doing them step by step to show the audience how to do each mod by itself. I agree that it should all be done at same time for the ease of it but youtube is my job lol

[@SILVERCHARGEDS]

Good info!

[@Rockcal11]

Happy Veterans Day bro !

[@Zander13Productions]

thanks!

[@hectorfr91]

Thanks for the reply.

[@MrBooricua]

too bad they don't offer front suspension, my control arms and tension links on my Non PP are starting to show wear damn uneven highway over here are bumpy as hell.

[@Zander13Productions]

I imagine they are working on some future stuff but I agree

[@mattkent75]

Sold!!! Deff getting me some.. great video

[@Zander13Productions]

Awesome. zander7 will save you some money

[@lobbyrobby]

I'm watching all these suspension mod videos and I don't even have a s550 lol. Next year it'll happen

[@Zander13Productions]

🙏🙏🙏🙏 I love BMR. Definitely use my zander7 discount code to save when you get your car 💪

[@davidleca01]

BMR 👍..

[@teamwarrior_fighter3747]

Great video n the mustang coming out good

[@Zander13Productions]

more mods on the way

[@teamwarrior_fighter3747]

@@Zander13Productions can't wait to see

[@robert2482]

Great vid

[@bullitt4049]

Looking forward to this weekend for the U Tube meet. I hope I get the chance to meet you and Stang Mode. Thanks for another great video . BULLITT K0040

[@Zander13Productions]

absolutely

[@hugopena5193]

First view first comment your welcome 💯

[@Zander13Productions]

❤️❤️❤️

[@glenncooper1893]

Check out the video on KZbin caddy Jack volume 2 the fastest CTS-V in Oklahoma. 9.43 150 and 1/4

[@37oH55V]

Great mod for the 10r80 cars. The poor bastards with mt82 are struggling with wheel hop no matter what they do. Has anyone ever done a solid axle swap on an s550?

[@Zander13Productions]

I wish ford would offer that

[@Penn-]

370H55V O773H there is an entire 9 inch swap on driveshaft shops page if I remember correctly

[@37oH55V]

@@Penn- nice. I'll look into it. I'm hoping to get an s550 roller sometime next year.

[@chrisbaskett808]

I like your videos, but there are too many ads. 1 or 2 is okay but 4 or 5 is a bit much.

[@Zander13Productions]

I only place a couple but youtube may add more. KZbin has to make money somehow

[@jr8028]

2nd comment

[@SupremeVsuals]

Nice paid advertisement

[@Zander13Productions]

I was not paid for this

[@hendersonjohnson3750]

I have a 2020. No wheel hop

[@keithblair8428]

Lost me after third ad....

[@stangnutlx]

How is NVH?

[@Zander13Productions]

No NVH increase