STOP Audio Feedback: 5 Effective Techniques

[@Zeal2024]

Good stuff here! Been struggling with the lavaliers. So sensitive.

[@roadshowmasters]

Great Explanation. Well articulated presentation.

[@RobertSababady]

Very nicely structured talk Jordon. Thankyou. Would you kindly add a video on "eliminating humming and static noise when connecting a mixer to a computer" to your video pipeline please?

[@kekmajomT1G]

I don't have much experience, but I find a way to fix that problem is to make sure all connections are secure, or switching out cables.

[@audrameyerhofer3036]

Thank you! I learned a lot.

[@tomstrizak1117]

Good point about the 300 -400hz, always like my mix light in that area. That's the starting point for a lot of regen that reaches as high up as the 8-10k squeal.

[@bruicewallace2680]

Hey Jordan u need to do some tutorial on how to used some of the digital audio mixer. Everybody is switching away from the analog mixer these days and going digital.

[@getsmarter5412]

While setting up, keep the feedback from running away while looking for offending freq's by- drop the threshold of a downstream limiter to a very low level, so low that it will choke the volume of you talking through the system. Voila- feedback will also be limited to that same low level. Quite amazing to have your PA feedback at a controlled -40 db. You of course bring the threshold back up for normal operation. Want to reduce the chance of feedback? Throw every other frontline mic out of phase. Now instead of multiple mics loading up, they now cancel that out. 38 years and 5000+ shows sitting around figuring this stuff out.

[@crazydjchile]

Hello. Very interesting. How do you throw the mics of phase? This sounds like the magic to me.

[@asseribrahim4969]

am a fan of your videos and i was wondering if you guys have worked with Soundcraft SI Expression before and if you did how can I send and receive audio with the madi output USB sound card

[@kristjanorula1636]

Please make a demonstration video on how to connect the feedback eliminator to the Yamaha MG10XU mixer so that the eliminator works only with the microphone and not with the whole PA system.

[@temp26j724-i]

Impossible to implement on MG10XU as there is no SubGroup or Aux Send on this mixer. Unless you are running yr Mic into the "Feedback Eliminator" then to the Channel Input. But then you'll need outboard Mic Preamp.

[@peterldelong]

When you have an artist with all IEM’s, there won’t be any feedback. I despise monitor wedges as a pro live engineer.

[@AnilKumar-zo2eu]

Thank you so much sir for your packaged information.

[@Mx-pch]

Hello could you make a review/rundown on a dbx 226xs compressor/gate to see if it’s really worth it. It would be much appreciated

[@crazydjchile]

Thanks for all your vids!

[@thomas9469]

Hello boss what u think abt Yamaha DBR 15 s. Planning to get for church. Thanks.

[@davidadekoya3468]

Thanks for your video. I’d like to ask, I am trying to use some studio speakers/subwoofer to connect my focusrite audio interface with a midi keyboard and MainStage software. My question is so I NEED an amplifier for this connection or can I just use 1/4 Jack cables to connect from my audio interface to the studio speakers/subwoofer? You can give some suggestions of products as well. Thank you so much for answering.

[@danielmazariego2126]

I have an issue with my Pastors mic when he’s preaching. Everything else is muted, I have even tried EQ to bring it down and you don’t hear the consistent feedback sound but the way the voice sounds is pitchy like if it was feedback.

[@DannyGmusicc]

My issue is the performer cupping the mic and leaving the stage

[@projectdiy985]

Same here

[@altaescuelaofficial3651]

Is there any way i can use my audio interface as a mixer and control all audio in my DAW with my plugins and have a way to send that audio out for monitoring or wedges? If you can please help it a question i been having lately and if its possible may you make a video thank you!

[@rbhughes538]

My issue when I was having feedback was that the amp to the speakers was set too high. Once i reset it correctly everything was good.

[@Impaneza_Heritier]

Can you make a tutorial showing how to multi record using yamaha TF5 mixer in logic?

[@kettnercreative]

I sold mine a while ago, If I can get my hands on another, I will.

[@Impaneza_Heritier]

@@kettnercreative I will really appreciate that!! Or even if you can find a similar one to use that would be wonderful

[@koollifebillionaire]

Beautiful ❤️ and best tips

[@Sane_Mania]

Got it. Thanks!

[@JuliusValentin]

Hi Jordan, quick off topic question. If I use the SE DynaCaster with the 30 dB of boost on a GoXLR, would I still select "Dynamic" on the GoXLR? Thanks!

[@Gregie_glt]

Hey I've been watching your videos on youtube on how to connect an entry level controller to speakers . I have a question , this might be very complicated so here we go . I've got a pair of Passive speakers that has an amplifier and an equalizer and I also have have a pair of studio monitors how can I connect them into my computer ? Will I need a usb Audio mixer or an audio interface . Then I also have a Pioneer DDJ FLX4 is it possible that I connect the controller only through USB and not use the audio output of the controller.

[@thegamechanger3793]

What if you have wireless mic only? Single mic and creating feed back.

[@SamuelEbiyonUwawah]

Thank you

[@IGrindMinecraft]

Hi, I follow your KZbin for a while now and I wanted to ask you something, my current audio setup: Connect 6 -> Dynamite DM 1 -> Shure SM7b -> DT 990 Pro I also have Komplete Audio 6, and Focusrite Scarlett Solo 3rd Gen Nowadays I use VoiceMeeter Potato in order to supply to my microphone additional effects which I want to have physically and not via the app (because it might be causing CPU usage and lag) Is there any cheap mixer that can give me these options (which the app currently gives me): - PAN (Right Left) - so people in stereo-microphones supported apps will hear me in the side I choose in the mixer (for example, if I want to talk on the right side for someone in TeamSpeak and that they hear me only in their right ear) - High & Low configuration, basically make my voice a bit lower and deeper and more crisp and understandable. - Echo / Delay effect - Reverb effect I'd love to know, thank you (:

[@taniyaverma9770]

Hello sir, What is the best way for karaoke singing with track, in MG10xu to Android mobile with type C socket, 1 usb output from mixer to cellphone? 2stereo output/monitor output from mixer to focusrite interface? 3 monitor output/stereo output from mixer to irig stream solo? I want to record my karaoke singing in open camera app. Kindly suggest mee sir. I am your faithful subscriber since long time... Please sir help. I have MG10xu and behringer um2 interface Suggest needful cables Hoping in your feedback..thank you

[@anirbansitar9378]

One help required. I have scarlett 4i4 which connected to SM57 as input and a PreSonus Eris E3.5 as output. I am playing sitar which 4i4 is always considering as monitor but i want the speaker to be just speaker but not monitor. I want just like in my home I am playing sitar and my family can listen to it just like listening inside a auditorium. Please help me.

[@muhhamed4177]

Great!

[@nottoolive]

Great video!. I have a question about my presonus audiobox go. I use trs to xlr to my monitors (kali audio lp-6 v2). It is silent. In terms of hiss. All plugged into my desktop computer My problem is when i play music through spotify to my speakers and it crackles everytime i use windows(os) or just scroll on spotify. I have set many different sample rates and block size. I cant see to Eliminate the "Crackle"

[@nottoolive]

Audio effects (off), spatial audio(off), high performance power plan. Different display port. Tried all these things

[@kettnercreative]

Sounds like a firmware/software issue?

[@nottoolive]

@@kettnercreative seems like it, cant downgrade spotify as it updates before it opens.

[@taniyaverma9770]

Hello sir I am from India Sir please help mee. I have 4 channels mixer and a audio interface behringer um2 I am doing live singing stream with background tracks at Starmaker application, sir my vocals is perfect but the track quality is so poor What can I do sir ..i am trying hard but all is waste.. please sir help Did starmaker bandwidth is not supported? Please reply sir

[@47arav]

Rodecaster pro 2 + mv7????

[@FirebrandVOCALS]

Cheers 🍻