Stop Installing Your Air Compressor Under Your Hood! NEW EPIC KRAKEN INFLATION SYSTEM FOR JEEPS!

[@djp1234]

It just needs a "DEFLATE" button and a built-in analog PSI gauge, and it will be perfect.

[@chickenpermission9969]

I wonder if something can be rigged up to the Purge button for a deflate option....

[@blueman5924]

so if its all still hooked up, unit turned off, cannot one simply hit the purge button to deflate ? the tire monitor system will display all four pressures. 🤷‍♂️

[@TuanNguyen-ld8kl]

Not a new system. Innovativeatproduct has one for quite awhile now. It the same right down to the hose carry bag plus analog psi gauge and deflate/purge built in. As a matter of fact you can have preset deflate setting. Have it on my gladiator for a year now. This one is a little slicker with the no drill air valve mount.

[@ruready4adventure743]

@@TuanNguyen-ld8kl I went to look for such an item, even googled it. No such item found. Please let us know of a website. Thanks.

[@JoelHansma]

I was thinking they also needed an analog pressure valve, I would also assume that just pressing the purge valve while hooked up would let you air down quickly, and all to the same PSI. Since it is all press to fit lines, I would imagine you could easily just add a valve to the line?

[@jason.hartson]

That's a really well designed system and I like that the hoses aren't dragging on the ground while in use. Would love to see an option of a stand alone pressure gauge on the main control panel so tire pressure sensors aren't required.

[@wesman7837]

Pressure sensors are ridiculous, and it seems like they are always malfunctioning. I swear every car that has them one of the four is not working.

[@keniaflores8881]

I got the outback tailgate table with a magnet to hold my knives. It’s got a slide out bamboo table with it. I love it!

[@garylgoldberg]

Outback Adventure Trailgator has a solid latching system and I love the look and wooden undertray, plus you can put your logos on it. Sweet.

[@Onebandit]

I love my outback table works very nice solid and doesn’t rattle at all

[@thecodedgamer]

Yes, this

[@dtauman012792]

As a semi truck , and heavy equipment mechanic. I use these fittings daily and replace them daily. Yes this system is totally serviceable, witch is nice. How ever. If your airing up all the time these fittings will wear and leak. The push to connects are not meant to be constantly undone all the time. If the hoses are not flush cut nicely and square they will leak. If they get pinched they will leak. If the get pulled on constantly they will leak. And if they constantly get hot , they will leak. Just my 2 cents. I like this idea and how clean it is. Don't even have a jeep. This was just a recommended video on my feed. I like your video editing layout and channel this far. New sub!

[@OscarOliu]

Just curious, my dad has had the same ones for decades, they are made by Snap-On I believe, and they don't really leak, there is one gun he uses that leaks, but the nozzle is the issue.

[@toms5157]

Looks like my Innovative AT Products kit, except without a gauge. I do like the purge button though. Difference being I can switch mine from either side with the Aux switch.

[@journeybeforedestinationov3553]

Wish it had a pressure gage included in the system. Would also like to see standard quick connects at the manifold locations so one could use existing air accessories. But overall it looks really cool. Would be a lot more work if you were running ARB lockers as well.

[@joecollins69]

Agreed. Needs a built in air gauge.

[@dougbourdo2589]

I would install a small air tank as a pressure reservoir for the lockers.

[@hondoflatty5125]

Go with original, this is a knockoff. It has both of what you're asking for. Innovative AT Products.

[@wt9653]

I made dual tire inflator with Milwaukee M18 inflator. I used two Flexzilla 25ft hoses attached to splitter. M18 inflator is strong enough to pump 35" tires with no problems. All fits inside Milwaukee packout. Whole kit costed me 350 dollars. The benefit is, I can use it on any vehicle I'm planning on taking.

[@toddmitchell43]

The Outback table is incredible.

[@glenngore6609]

I will add my two cents to the discussion, the Outback Adventure Products Trailgater with the slide-out wood cutting board is the only way to go with tailgate tables. It is worth every cent, I love mine.

[@Skate42112]

I have the trailgater myself. Very clean look and hands down the best talgate table

[@dragonseggs]

Yeah just wish there was molle attachment on the bottom side of the table.

[@GRCHADSTI]

Casey needs a windshield sponsor 🤣

[@IdiocracySpace]

American Adventure Lab Versa tailgate table of course! Painted any color. No cable support needed. Lights, magnet, molle, bamboo, and bottle opener. I call it man jewelry. 😍😂🤙🏼

[@a.common.American]

Man I love this, so awesome. Not just a product I can get behind, but the people behind it. Let's go Landon

[@az-chris1136]

I've had my ARB twin compressor under my passenger seat since I got my JL Diesel 2 years ago. This seems to be the cleanest design set up yet, but it's not much different from what I've been running (I also use Speedflate). I recall you saying that you didn't like the under seat location for the compressor because your daughter didn't like the noise . . . I guess that's not an issue any longer.

[@Casey250]

Indeed. A lot has changed in 2 years and 99% of the time I use this Jeep on long trips to make videos riding solo.

[@paulcook773]

I've been using the twin ARB under my passenger seat with the SpeedFlate for over a year. This system doesn't allow you to air down or see your current pressure. Even the TPMS sensors on the Jeep isn't real-time, so it's not totally accurate. Also, can't hookup an ARB line with accessories. Not having an air-down valve is a huge short-coming. I love being able to air down and have the exact pressure in every tire with SpeedFlate. I'm sure you could add this feature...really important!!!! Otherwise looks like a great build.

[@xtina818]

I have absolutely no need for this but want one just because it's so well made. I should drop by the Epic shop just to see all the cool stuff sometime

[@martins4401]

I have a 2016 JKU, any plans to adapt this system for the JK series? This is super clean and efficient. I'd really like to add this to my build. Thanks

[@iFanchi]

Me too. 👀

[@reddipl]

American Adventure Lab’s table is the best! I installed one and love it. It’s solid and looks fantastic.

[@justinmontgomery3574]

I'm digging the tailgate table idea!!! That would look good.. they have a jku air setup yet

[@CavemanOutdoorsMissouri]

Very cool BUT I would like to see the power switch on the driver's side

[@joshuaschroader3397]

Outback Adventure Table is the way to go. Love mine, no rattle, slide out cutting board adds good space too.

[@MarthallersMisadventures]

I installed the Frontrunner table after spending weeks doing research. It is awesome.

[@jazzrat]

Needs a deflate option as well as a guage for preassure for cars that don't have tpms. Will definitely be needed as the kit evolves for more vehicles

[@victorheinen6521]

Front runner table is fantastic. Good aluminum with a slide out wood extension

[@ToddSwagerty]

Awesome system, Epic should sell out the first run quickly!! My wife likes to sit in the cab while I air up, so I think it would be too loud for her, but that isn't the same for everyone.

[@Detachedc14]

I’ll keep my duel compressor under the hood on my JKU With Quick disconnect on my front bumper. Super simple switch where my locker switches are. But good luck with your new product.

[@ginettedecker9494]

My husband and I just installed an Outback Adventure Products Tailgater with the cutting board and magnetic utensil holder. The quality is second to none. No rattling on rough roads. Well worth the investment!

[@RaptorMike-Bailey]

I second this. Mines rattle free and been super useful.

[@jad21964]

Or you can go to home depot or lowes or anywhere you can get some bar stock and make your own under seat mount. $300 is a bit steep.

[@StlrNtn95]

Outback Adventures all day long! 👍

[@TexaSteven]

I’d also recommend the Outback Adventure Table, I bought it after watching Trail Recon review and I love it.

[@matthew2hunley290]

I didn't agree with the push connect, but i understand to make it easy to sell and market. And easy for non mechanical people to understand.

[@Bmk87ca]

I hope they release a similar product for the Bronco. I’d like to support a local company.

[@TheEPICBeardedGinger]

😏

[@paultrend]

Nice idea, but instead of left and right side air connections I would have preferred fron and back air connections. Additional a small pressure gauage on the swithch panes and self locking air connectors would be beneficial. Just my two cents on that nice system.....

[@davidmunyon65]

Adventure Labs makes an awesome Tailgate flip table with wood choices and molly when closed!

[@underabigsky]

I am using a Springtail Solutions for a table it also has molle attachments for a year, 👍. Even if u don’t use the molle panel it weighed significantly less then others I tried.

[@matopezuta2050]

The only thing I can see that would be nice it a pressure gauge near the power switch. It would be nice to be able to see system pressure if filling another vehicle that doesn't have TPMS.

[@Rwhistle132]

judging by your name, and info drop of " having to leave an island" i guess you live where i do, Beautiful Vancouver Island! awesome job guys.

[@Your32Maker]

This would probably be a good fit for , "Matts off road recovery." 👍😊

[@mikeerin5031]

Well this works for your application if you are running same air pressure front and rear. I’d like to see someone actually develop something like the H1 had where you don’t need to string out all the hoses at all.

[@davids5006]

Goose gear table, no rattling at all and fits like a glove with no drilling

[@CurtisDavis89]

Even if you don't run larger 33"+ tires you should get the duals for the infinite run time time allowing larger tires later or my favorite idea is to run air tools like impact socets or pneumatic tools for offroad repair! If you have the twins you can help anyone in the group!!

[@brawnto]

Looks very well designed. I'd love to see something similar for the new Bronco.

[@Casey250]

Me too :)

[@Boeruine]

Let's second that

[@theviewfrommyhammock]

That is the best air system I have seen to this date. I was waiting to figure out what I was going to to do for air. But thanks to Epic they figured it out for me! I am ordering once it becomes available again. Thank you!

[@jonahshupert1329]

The logo on the switch was silk screened for sure! 🤣🤣

[@trackexplore]

That's an awesome system. Would the mounting brackets fit for a RHD vehicle? What I mean is, Our driver's side is your passenger side. Will the compressor mounting bracket which goes under your passenger seat, will it fit under our driver's seat (Australia}. Cheers.

[@chrisrhudy2000]

that tire pressure ballancing effect alone makes this system worth owning. Just make it for dodge ram trucks and ill buy it for sure!

[@amorton94]

If you only use the compressor for filling tires, cool setup. I like the valve stem chucks. No pressure gauge is an L.

[@streetstomper]

This video and product could not have came at a better time seeing as I just had my compressor stolen from my truck a few weeks ago and I have been looking for a replacement setup

[@jamespaluga8953]

Awesome, I was looking at option and will buy when available!!!! Thank you

[@iamleidig]

I usually run higher pressure in front where the weight is, a 55/45 valve might be nice for proper tread wear

[@iamleidig]

Lol, that's the very next topic you addressed in the vid

[@Pterodactyl-kn3ve]

That’s great. But how well does it mount on a swing up left gate of a Tahoe?

[@readyforanything6164]

You guys should run something like a air lift up and down switch to make airing down just as easy from the inside. Also a small air tank would help take off some stress from the compressor and speed up air ups. As for your tailgate table I saw a trail recon video a few weeks ago where he showed the one he’s making it’s stainless with a pull out cutting board which would be pretty sweet.

[@Scout-1]

When will they be back in stock? I want to get one because I’m building my jeep right now but they are not available. Thank you

[@Casey250]

Yep very soon i am told. They ordered a pile more.

[@Scout-1]

@@Casey250 thanks for getting back to me. I hope to order one soon

[@Hydecreeklogging]

I recently got rid of the compressor and did a home built CO2 set up. 10lb CO2 tank and amazon regulator for 250 bucks and refills are 15 bucks. Fills 4 tires from 5psi to 30psi in less than a minute. Pretty hard to beat.

[@Casey250]

Ya c0o2 is fast and handy. I fill up too often to use co2. Id consider it in JK for weekend wheelin

[@mushtang2]

It's easy to beat if you need to fill your tires and your tank is too low on CO2 to do it. Compressors never run out of air.

[@markfellhauer352]

CO2 and rubber don't play well together. Permeability rate is about 5 or 6 times greater than air alone, and I'm fairly certain that CO2 permeating in rubber affects tire integrity and lifespan.

[@Hmoob101]

Try factoring in the time you drive to go get your tank refill I would say it more than a min n cost more than $15

[@Americanmafia1]

A pretty bold title for a product designed to fit a whopping 2 model's in the vast world of off roading

[@muchiii455]

Any future ideas for Toyota 4Runners, presumably a 4th Gen. This is awesome and would solve my inflation problem in what to get/buy.

[@jk_wrangler13]

Can they make one for a jk? Also, what about your filters. Should they not be relocated so that way water want get them wet in case you go through some deep water?

[@Casey250]

People over estimate how much water gets in a Jeep. Ive never had water come inside in all my adventures, even when over the door line.

[@jk_wrangler13]

@Casey 250 that's good and hope you never do, but I have seen it around here where I live. To me it's not you haven't but that you could. That's the reason why I asked.

[@Casey250]

I could drive off a cliff too. Things happen 🤷 lol

[@FreedomToRoam86]

awesome system - with symbiosis, too! Seriously would like to have in F150, too. But should be easy mod I would think, just longer wires and air hose.

[@DuaneCaldwell]

That looks awesome! As a 4Runner owner, I'm officially jealous! Just don't let the other 4Runner owners like Chef Jon know that I said that out loud. LMAO Great job, Epic!!

[@kengeroo]

any way to add a gauge at the driver mounting plate, so you can defalte all for tires at the same time ? or would the expelled air from the tires introduce too much "moisture" into the compressor ? = oh and perhaps a valve on the purge valve to deflate.. make sense ?

[@FlawedOffroad]

in theory if you connected all 4 hoses and hit the purge it would deflate all 4 tires, but id imagine it would be at a slow rate

[@Casey250]

There many easier eays go air down then hooking up something like this or ang other airline system.

[@kengeroo]

@@Casey250 i suppose because airing down is much faster than airing up,, so deflating each tire would be fairly quick ;) ?

[@ronbarry5624]

Has the Epic Kraken been rigged up to fit in a new Bronco? Am about to do an under-hood ARB twin install on a '23 BadSquatch. But this system is pretty darn slick.

[@Casey250]

No it hasn't.

[@jamespaluga8953]

American adventure labs has a really nice table - really like mine + has a molle panel

[@LiveswithMartha]

That’s a smart guy. Good job!

[@ezmerelda4450]

Outback table!!!!! Awesome company out of UT

[@BeaverDAMage]

What about water? When crossing water like on the Rubicon trail, we’ve had water over the door sills and up under the seat, thats why we mount ours in the engine bay.

[@operation4wheelz]

They should have a version that only pumps two tyres. Quite often people run slightly different pressures front and rear. Maxtrax has a great product call “indeflate” just connects to the normal air fitting and does two tyres… it also deflates two at a time.

[@tonyjackson8640]

That was covered in the video.

[@Mattfromfla]

This is a very good option; however, I prefer using an aux switch so I can easily control the compressor from drivers seat while watching tire pressure.

[@TheEPICBeardedGinger]

Another reason we designed it to not use an aux switch is not all Jeeps come with them, but we do see your logic.

[@Mattfromfla]

@@TheEPICBeardedGinger Yeah, it definitely makes sense to have a place for it on bracket for those without aux switches

[@BehindTheFoodTV]

@@TheEPICBeardedGinger can you use an Aux switch instead if you have them?

[@willwilliams2944]

American Adventure Labs makes by far the most innovative tailgate table, but not cheap at all compared to some flimsy bolt on ones out there though.

[@FlawedOffroad]

I dont really get why the switch is on the passenger side but i guess it doesnt matter, you have to go to both sides regardless

[@TheBackCountryExplorers]

Nice, i made the same system a few yrs ago but with a gauge and dump valve.

[@SigurdurHreggvidsson]

In iceland the airlines come from the fender to the tire and no need to remove them at anytime

[@chrissadler1745]

Wish they would do a Jk kit, or sell just a hardware kit as a premium...brackets hoses etc

[@funwithunklewilly4069]

But are the left and right sides cross-tied so that all four tires end up with balanced pressure? My OCD gets me high when the dash shows all tires at the exact same number. Oh, and TrailGater makes a really nice tailgate table.

[@Casey250]

yes

[@usprideca]

Ford raptors need this set up also.. I’d buy it for mine

[@GreghouseVanBouten]

Clean and space-efficient... That's a well thought out system :)

[@marcnickelson7466]

Will one be available for the Jeep Wrangler JK?

[@Connerstunt]

What brand is that mount for your pillar lights/overhead windshield

[@MSparks9509]

So…this is basically the same as the Innovative AT mount that’s been on the market for a few years. Slight differences. I’ve got the Innovate AT mount wired to Aux 4 in my 392.

[@trevinated]

I've been looking at the ROCK SLIDE ENGINEERING TAILGATE TABLE I'm Interested in what you decide to go with.

[@Efraboy87]

Nice Omega sea master Planet Ocean!

[@Casey250]

Thx. One of my all time favorite watches.

[@leonsoto8333]

Similar setups have already been made. That pretty cool tho

[@bdjm8595]

Great kit although I would mount the compressor under the hood or somewhere less noisy.

[@aaronhunt1616]

What I’d like to know is how do you get your tpms to work with the aftermarket wheels and bigger tires

[@Casey250]

They just work.

[@Thexkidd]

I would just like the clip on end that goes on to tire valve stem. Looks like it grabs and no air loss.

[@Casey250]

Its slick

[@TonkTheStonk]

You have an Aussie ARB compressor good choice! I might even buy 10 for my Aussie RHD customers but so sorry LHD only😢

[@canyonoverland5003]

22:04 It's funner to lose an eye instead of purging the system first 😄

[@SamAthanassov]

You can use the purge button to deflate all of the tires as well.

[@willrouse2351]

Great work Landen

[@richards144]

looks great. will this work with the new power seats in the 24 models?

[@Casey250]

I'm not sure if the new model is out yet but they have redesigned it slightly to.

[@BennyTygohome]

Those air chuck connectors are cool

[@phelandeluna5439]

This looks interesting... 3 questions though. How do you plug the drain hole with wiring in it? How do you get the slush mat to sit flush to the floor with the wiring? And what do you do to avoid having the seats sitting at different angles?

[@TheEPICBeardedGinger]

We prefer to seal them with butyl tape first then a clean layer of water proof or regular guerrilla tape, as for the factory slush mats, they don't keep water from coming into the vehicle if installed as designed so we trim those, and lastly the amount that is under the seats in different spots is unnoticeable to everyone that has tried it or currently has it in there vehicles. All great questions though.

[@phelandeluna5439]

@@TheEPICBeardedGinger thanku!

[@cmbranso]

Will this fit on the Bronco?

[@redeyetrucker67]

Needs a shutoff valve instead of a plug that will get lost and not be available when you want to use it

[@gonzo559055]

Are you planning on making this mount for the bronco???

[@astrogreenarrow]

Wonder if this could be used for a 2011 Land Rover lr4

[@Ag47SilverSurfer]

Do i have to use the hose that it comes with? Can i use my thor hoses?

[@leonardolopez6695]

Do you know if they are going to make kits for other types of vehicles like the bronco and Tacoma?

[@brandonvaughn8292]

OMG I knew your Canadian when you did pro cess. Lol

[@nathanielpulling]

ya would be cool for airing up tires but dont think i want to hear it under the pass seat while my arb's are running. think i'll leave it under the hood!

[@MikeJones-vb1me]

Stick a hinge and a couple cables on that molle rack viola table