I find with sealant sprays, if you use them regularly, say 4-6 weeks they seem to 'layer' and give fantastic results. Thanks for the video which certainly proves a point regarding these sprays.
@petermaidment11755 жыл бұрын
I do the same thing especially with TW and meguiars it is so cheap and it uses so little I sometimes give the car a quick spritz every week before drying and it looks great. 😁
@weaverdetails47475 жыл бұрын
This is so great to see because Beadmaker durability has been similar for me.
@abelcelestinjr88105 жыл бұрын
Interesting but I have a question doesn’t the 3D waterless wash leave some carnauba on the paint??! I would assume you would use some type alcohol solution or prep, to remove that residue and than try this test,
@cbruno121804 жыл бұрын
Abel Celestin Jr i thought the same thing!! I call bullshit..
@themikeroberts4 жыл бұрын
Yes, 3D website says "Waterless Car Wash Cleans, Polishes & Protects". That "protect" claim would mean it leaves behind something, which probably causes beading. www.3dproducts.com/waterless-car-wash/
@petermaidment11755 жыл бұрын
When I used bread maker it was flat after 2 weeks! Glad you are getting good results.
@joseortega5555 жыл бұрын
Prep work and are you using it as a stand alone or on top of something else? I haved used it as a stand alone with a purple power automobile wash/dry/ isopropyl alcohol wipe down. It works pretty good for me. I got 2 months out of it. It probably could have gone more but I was bored and decided to try the TW ICE seal and shine. Working great so far also x 2 weeks. For the price and ease of application, I'm okay with 2 months protection. I have TW Seal and shine with collinite 845 on my truck. The paint looks super deep. The next wash I might to a bead maker dry down to see what it does. Give it a second chance!
@petermaidment11755 жыл бұрын
@@joseortega555 thanks for your response. I used it as a topper over the existing sealant, i day prep it with a clay mitt but i did not polish or prep wipe. I am now using TW S&S which i have again used as a topper. My next job is to do the proper prep work then add the sealant. I probably won't use B&S again due to the amount needed for the initial coat plus i have the TW to use and Megs Hybrid Ceramic! I must stop buying products!!!
@andywazy43835 жыл бұрын
Great video! I am currently using P&S Bead Maker on my full detailed vehicle as the sealant. I’m not very impressed with one thing about the Bead Maker and that’s that it seems like it attracts dust from gravel roads! I’m actually at the point where I’m wishing I didn’t use it as my sealant! Have you tested any sealants on gravel roads to see if any products repel or attract road rust to them?
@gregoryvela75492 жыл бұрын
Topping beadmaker with paint gloss spray will help with it's anti-static properties
@jesseviers48710 ай бұрын
You can mix bead maker with dream maker and it will repel dust. 10:1 bead maker to dream maker
@rogerphilabaum45635 жыл бұрын
I've heard a lot of people say that spray sealant don't last. I've got Hydrosilex spray on ceramic going on a year and meguiars hybrid ceramic going on 6 months now. I maintain these vehicles weekly and they are garaged but they are driven as well.
@jeffmartin67215 жыл бұрын
And a couple of sprits per panel about every 2-3 weeks and you don't have to worry about longevity. I have bead maker and I love it.. good video.
@no_handle_required4 жыл бұрын
2019 Detailing. 90% hype 10% effectiveness
@LittleJimmyNorton4 жыл бұрын
FINALLY!!! A fucking real durability test, thank u. Tired of seeing morons spray, degreaser and iron remover and rub it in and say, it doesn't last. U did a real test.
@DiamondDetailingBuzz Жыл бұрын
I’ve purchased 3D bead it up in 1 gallon bottle, my question is am I supposed to be diluting it or is it ready to use ?
@vbBegin19572 жыл бұрын
The problem with beading it will render water spots to your paint. Doesnt drip off completely. So both products are not good.
@donnclaibornejr72315 жыл бұрын
Maybe it makes no difference but I noticed you made more rinsing passes over the Meguiars side than you made over the other side. With that said the difference in water beading seems negligible at best. Thanks for sharing your knowledge and expertise.
@kristofferpence5 жыл бұрын
Luke, not sure if you have tried it. But try optiseal by optimum. Tiny bit goes a long way and curious to see your thoughts
@adamg78505 жыл бұрын
Opti Seal is good but there are much better spray sealants on the market now with much higher Sio2 content and better durability. Hyper Seal by Optimum has double the Sio2 content of opti Seal.
@jdisdetermined5 жыл бұрын
Opti-Seal was an incredible product when it came out, it is showing it's age now.. Seal & Shine is far more durable, same easy application.
@danlc95 Жыл бұрын
I'm going on five months with Opti-Seal on part of my trunk. I made a video of it in September. Brian from Apex did a video pitting it against Wolfgang and it survived till the end. Opti-Seal's biggest "problem" is that it doesn't make the beads people have grown to like. The absence of this visual feedback equates to lack of protection - which is all in the perception. The other "issue" is in application. It's vitally important to let the majority of thr product flash away. Wiping immediately after application can remove most of the active ingredients before it has a chance to link up with the paint. I was guilty of doing that, as well as not applying enough product on the paint. Optimum recently updated Opti-Seal and it now had increased sio2 content. It sounds like it's going to be closer to the traits of the original Hyper Seal, before they included the sic component they use in Gloss Coat, and their professional coatings. Right now I have four cars in my close proximity that are going to ride out the winter with Opti-Seal. My car as well is going out with Opti-Seal. Since 2011, Duragloss 111 was my winter protection of choice. Very tough, protective sealant. It's a beast. Before I started offering ceramic coatings, it was my most durable offering, and when combined with their 601 Bonding Agent, it was even stronger. Duragloss Aquawax is another super strong spray sealant. I prefer it over the more modern offerings. It outlasted Bead It Up for me. Great topper for Duragloss 111, and their 101 cleaner / sealant.
@rooboy992 жыл бұрын
Meguiars HCW is still going strong on my garaged car, 4 months later. Non garaged car only lasted 3 weeks. Applied exactly the same. Total let down. The first time i washed the non garaged car, water sat on the car like it had no product at all. Sent email to meguiars Australia with pics. No reply
@dustin92585 жыл бұрын
Not sure which waterless wash that is, but the chemical guys waterless wash will actually bead water on its own. Might want to just rinse the trunk lid
@lgarcia19135 жыл бұрын
Looked like he use 3m waterless wash
@M4rtix214 жыл бұрын
ye I was thinking the same ... bead maker would never have such water beadin' ... FAKE RESULT !!!
@amounifnd4 жыл бұрын
Good review. And yes this is a fair review as both sides performed differently regardless of the wash used. Could have used $5 armorall wash n wax and it can cause beading but it would be uniform if the sealant below had worn out. Here it clearly hasn't for the bead maker in particular.
@DrCrown-wm6ft5 жыл бұрын
Luke, I love your stuff, I was thinking they are still beading because of the waterless wash....think about it!
@checanet5 жыл бұрын
Yes, BUT this is a little (or nothing) over water, two panels have diferent beads. Both products are great.
@davidruggles9965 жыл бұрын
Good stuff Luke. Appreciate the fun long-term test!
@CaptChrisCanning5 жыл бұрын
For a spray product, I defiantly think it's worth the money for someone that just needs quick protection.
@backhandkill5 жыл бұрын
Defiantly?
@justinmoses32255 жыл бұрын
I like Sonax spray + seal & 303 touch less sealant. Great video man keep up with great job.
@aeacvlog20335 жыл бұрын
I've been experiencing as you are, IN FLORIDA TORRENTIAL RAINS & HEAT on outdoor kept cars. Beadmaker bonds well and lasts a looong time if applied right. People that say otherwise must just not be applying it right.
@brokenSnake Жыл бұрын
What do you mean by applying it right? Spray and wipe? Because that's what the instructions say and that's what everyone does. You're being delusional if you think beadmaker lasts even a light to moderate rain..just look at any comparison
@AEAC Жыл бұрын
@@brokenSnake For sure it's not my imagination, it's not rocket science observing & appreciating performance after torrential rain. But I'm not sure if you're actually asking for my help and want to know how I (we) easily achieve performance out of it... or if you just felt like being mean by labeling my results as "delusional?" Steve
@VW.9075 жыл бұрын
Interesting. Thanks for the update. I was underwhelmed by Meguiers, when I used it.
@jiajunryanho63325 жыл бұрын
For me I think it works best if I use hybrid ceramic wax every 4 weeks and bead maker every 2 weeks or so. It works very very well.
@bigd98485 жыл бұрын
I have the Adams ceramic spray coating on my Camaro SS. The thing held up through the winter and is still going strong. I use all of Adams products.
@adamg78505 жыл бұрын
Try McKee’s 37 if you like Adams products. Half the price and better products. McKee’s has a spray ceramic for $45 that lasts two years. You can do 6-8 cars with one bottle.
@richardvacanti42655 жыл бұрын
Hi I do believe your video. But can you please tell me why bead maker only lasted every time I use it 10-12 DAYS at most 2 weeks. And A lot of people have similar experience that I do and less with your experience with the products
@TheDex3024 жыл бұрын
Did you use any toppers or detail sprays on them over the 15 weeks?
@markkropf82955 жыл бұрын
I've seen several videos of beadmaker not beading that well upon application! Another thing if you want to really test out longevity based upon beading then you can't use a rinseless wash because even though no protection is supposed to be in them they will provide a level of hydrophobic property.
@brokenSnake Жыл бұрын
This
@CarlosHernandez-yf1py5 жыл бұрын
Spray sealants are really good, well at least the one i use which is Car Guys Hybrid. I’ve had it on my car and it will literally last around 3 months and that’s really good since I live in Florida and it’s 97+ degree EVERY SINGLE DAY!
@Steathl4 жыл бұрын
This test you have been done including washings with car wash soap so you can really test as a daily driver with 1 Wash a week or so. Still. Good contento bro Keep it coming
@3toedSloth755 жыл бұрын
Beadmaker seems to do a better job of sheeting, even at this age it is slightly better. Thanks for the update!
@efraimperez27263 жыл бұрын
Dude bead maker litterly is holding up way better than mg. It's a far better product and is so easy to apply!
@johnmclain895 жыл бұрын
Interesting. I’ve used both on my two cars. Applied at same time and the car that gets driven most also has HCW and it outlasts the Bead Maker car. I like both but find HCW durability to be quite a bit better. Interesting to see you found different. I’m glad actually because I like both products a lot.
@ssoffshore51115 жыл бұрын
Scott Vogan I believe how the HCW is applied can make a significant difference. It must be shaken and seems to last the longest when applied with no water
@johnmclain895 жыл бұрын
@@ssoffshore5111 Agree. I put it on a damp applicator pad and wipe it on and buff off. Works amazingly well.
@karl39275 жыл бұрын
If it's longevity and beading you're after try Sonax BSD. I think it would beat either of those two spray waxes/sealants.
@flipfloplogic5 жыл бұрын
I'd rather use a spray wax than a ceramic coating. I don't like the idea of something being on my car that is so permanent. I use meguiars hybrid ceramic spray wax and per directions I spray some on my car before rinsing one last time after a wash which happens every weekend. The meguiars wax should last a long time with repeated uses and I can remove it easily if I decide to.
@b48045145 жыл бұрын
Luke Your hair looks really great. Nice video I just bought some of the Beadmaker. I guess you are a social media influencer
@ThomasYT-5 жыл бұрын
Yeah I'm jealous
@tyromeyamaguchi90162 жыл бұрын
what's up with beadmaker's cure time? Really gotta leave it for 8 hours?
@rockingarchangel5 жыл бұрын
Meguiars is on an entirely differently level. It does last beadmaker on the other hand has a hard time surving a light rain
@homerj.bunagjr.72665 жыл бұрын
I purchased a mystery bucket from Adam's Polishes & it included a 4 ounce bottle of ceramic spray. I'm scared to use it because I heard you have to throw away the microfiber towels after each use. Is this true? Can you save the towel by putting it in a bucket of water mixed with All Purpose Cleaner right away? I read it can be done.
@someoneelse77245 жыл бұрын
4 oz bottle of what?
@homerj.bunagjr.72665 жыл бұрын
I edited my post to include ceramic spray.
@kevsanchz22753 жыл бұрын
Would this compare to hyrosilex ceramic spray ?
@coreysolomon28183 жыл бұрын
Question say I wax a car which one goes on first?
@litoaz5 жыл бұрын
Is it possible that the beading we are seeing is from the waterless wash? ONR kind of does that.
@gregsullivan74085 жыл бұрын
Absolutely. I lost all interest when the waterless wash came out. Very unscientific.
@Sherukka5 жыл бұрын
@@gregsullivan7408 No. I've tested Beadmaker enough and you can *feel* it still beeing there when washing using ONR because of the slickness that at least neither Optimum Car Wax or Opti Seal gives.
@gregsullivan74085 жыл бұрын
@@Sherukka Ok sorry for over-reacting. I'd still prefer it if just plain water were used, or a plain car wash with no waxes whatsoever. I've used ONR myself, and I think it does add some slickness. I take your point though.
@danlc95 Жыл бұрын
It might leave something, but if it were something substantial, both side would be reacting identically. ONR is accused to leaving something on the paint. Whatever it is, it doesn't seem to be there after a final drying wipe.
@Jeeper13785 жыл бұрын
Doesn’t waterless wash have polymers in it that are hydrophobic?
@dustin92585 жыл бұрын
Jeeper1378 exactly what I was thinking.
@tundrawhisperer48215 жыл бұрын
So if I invest in the gallon size BeadMaker, I’d want a high quality aftermarket spray bottle. Do you have one you can recommend? Thx
@teuvojormanainen65435 жыл бұрын
The cheap ones that for example meguiars uses with their professional line labeled spray bottles work well. Why pay any more money since those last years?
@tundrawhisperer48215 жыл бұрын
Teuvo Jormanainen do you know where I can buy them? Do they sell empty ones? Thx
@teuvojormanainen65435 жыл бұрын
@@tundrawhisperer4821 www.amazon.com/Bar5F-Chemical-Resistant-Professional-Adjustable/dp/B07C8JD9MP?ref_=fsclp_pl_dp_1 You can find em just about from any detailing store
@Jeeper13784 жыл бұрын
I think most people dont use BM right and then cry about it online. I know because i was one of them. Using while wet and/or as a drying aid is totally different from a dry heavy coat and proper cure indoors. Less dust, better beading, longer lasting protection.
@Carlos.Rivera5 жыл бұрын
Wonder how much can seal n shine last...
@bobliuca5 жыл бұрын
Thanks for the real test.
@frozenstang38685 жыл бұрын
how many times has it been washed in 15 weeks. I have a black car it gets washed at least 3 times a week minimum. what do you think of using these over a car already ceramic coated.
@rogerphilabaum45635 жыл бұрын
Both are excellent toppers.
@bengutierrez115 жыл бұрын
May i Ask what products do you use to wash it 3 times a week? Waterless, rinseless, or using traditional soaps ?
@frozenstang38685 жыл бұрын
@@bengutierrez11 I had been using turtle wax ultimate black 3 step kit and washing with simoniz . Recently bought some meguiars without wax in it and really like it. I just stripped all the wax and did a quick polish and applied Avalon King Ceramic coating and its in my garage curing. Looks fantastic now but only time will tell.
@billyray945 жыл бұрын
Not only how many times has it been washed, but what kind of wash (Pre-foam wash? Contact wash? Rinse-less wash?) And what was it washed with? Inquiring minds, and all that....
@noneya1895 жыл бұрын
Another great video love it bro !
@MithosXXI5 жыл бұрын
How many times does that vehicle get washed?
@jayo58883 жыл бұрын
I've spent 3k recently and have my business license . You doing a 5min wash and 45 min detail makes me want to quit . Lol . I care and love my car I would not let anyone clean my car . I got a 2020 tacoma sport with the nice interior . This makes me re think my whole life .
@mynsxt65 жыл бұрын
Turtle WAX Seal n Shine beats both easily!!!!!!
@hastheride5 жыл бұрын
I've been waiting like ages to see this lol thanks!!
@jeremys83605 жыл бұрын
Did you do a dry application on the Meg’s?
@neilpirelli92405 жыл бұрын
my clear coat is coming off please tell me what to do wilson ill do anything you say
@CaptChrisCanning5 жыл бұрын
ouch...... need a new clear coat....
@bobdylan91175 жыл бұрын
spend your money on hookers and forget about the paint, better off in the long run.
@johnsullivan75995 жыл бұрын
Bob Dylan U GOTTA LOVE YOUR COMMENT
@AzTurboMini5 жыл бұрын
Depending on the paints condition that's under the clear coat you may be able to have a professional body shop respray a new clear coat but most likely you're going to need a repaint. What brand vehicle, year and color do you have and how long has the clear coat been coming off? Also, is it garaged? Does it sit outside a lot?
@scottohms27995 жыл бұрын
OPTIMUM CLEAR COAT RESTORER
@covolt8825 жыл бұрын
Good lord. Even in the Wilco heat. Impressive.
@henryhong88635 жыл бұрын
Did u try chemical guys sprey sealant?
@nickemangione5 жыл бұрын
I gotta cast my vote for breadmaker. Not because I'm on the bandwagon either...the right side looks like its performing better
@SWAGURA5 жыл бұрын
So scott is wrong..what a suprise.
@danlc95 Жыл бұрын
That poor dude doesn't actually think. He assumes and runs to the camera to tell everyone.
@woncho15 жыл бұрын
That’s technology they getting better. So if a “spray” protections was made 2-3 ago & over they wouldn’t last as long?!
@midnightmystery5444 жыл бұрын
My car still looks good after a month of just using Lucas or V07 sealant.
@checanet5 жыл бұрын
Im wash my car every week. I use, later "P&S Bead Maker" or "Megs D156/UQW" or "Megs HybridCeramicWax 8:1 dilution (BestAplication HCW over clean and dry car)." .......My car bead very well and crazy !!!
@joemessman15 жыл бұрын
Beadmaker is so inexpensive I use it as a detail spray as well. My Longbeach Red car stays magnificent!
@tyromeyamaguchi90162 жыл бұрын
thought this was 30-60 days only?
@bahlowwings5 жыл бұрын
I think you cant go wrong with either one if it can last up to 15 weeks.
@dam_itman92125 жыл бұрын
I found about 3 months of normal everyday driving and bi-weekly washing with chemical guys snow foam is when I needed to redo the McGwires.
@DavidC15 жыл бұрын
Can you do another controversial video make KZbin go nuts
@DapimpBDSD4 жыл бұрын
No sealant last long for us that park our vehicles outside. I will give beadmaker a try tho
@danlc95 Жыл бұрын
Try Duragloss 111 "Clear Coat Polish". There are no polishing agents in it. It's a synthetic sealant that has just enough cleaners to reach bare paint (gets through polishing oils, light grime, etc, etc). The result is a very tough, durable sealant. I've used it for years on my non garaged car, and on my family's vehicles. Maintain with their Fasf Clean & Shine, and top off with their Aquawax. Super vintage products that continue to compete in this day and age.
@DapimpBDSD Жыл бұрын
@@danlc95 I'll have to try it. The only good sealant I've tried so far are the turtlewax ice, that stuff last at least 3 weeks but doesn't have much gloss
@danlc95 Жыл бұрын
@@DapimpBDSD - If you can PM me your address, I can send you some 111. I have extra from when I used to sell it.
@tomasprieto97462 жыл бұрын
Interesting, while I love BeadMaker I've never seen it really last more than a couple of weeks on a non-garaged vehicle.
@brokenSnake Жыл бұрын
I haven't seen it last 1 wash
@AliVapeReviews3 жыл бұрын
Bead maker is way better and price on the bead maker is amazing right now on detail geeks a little bottle of it and one gallon and a little bottle of brake buster and a one gallon and two microfibers for only $70 on sale now for the next 3 hours I bought 3 of them
@adamg78505 жыл бұрын
Who said they don’t.
@shaunthesheep14164 жыл бұрын
Nice arms
@RnBGarveyАй бұрын
Neither of these, especially beadmaker, will last anywhere near 15 weeks.
@artfulcoyote5 жыл бұрын
Interesting thanks for posting
@rauljimenezjr.40883 жыл бұрын
👍 #TEAMRENEGADE# LAREDO TEXAS
@M4rtix214 жыл бұрын
Waterless wash ... *Uses water* :|
@Tigersmundo5 жыл бұрын
*Turtle Wax SS is even better than both of these.*
@jamesstewart17945 жыл бұрын
Yup and only 6.97 at Walmart
@ssoffshore51115 жыл бұрын
Tigersmundo I know it resists chemicals better, but for the average person that doesn’t use automatic car washes, in normal daily wear and tear does it last longer?
@mattbenedum82125 жыл бұрын
More professional with the haircut.
@M.E632 жыл бұрын
Bead maker can’t last that long at all
@patb52665 жыл бұрын
"waterless wash" proceeds to use water...
@tykendrick8005 жыл бұрын
Neck to neck
@brylesmith13744 жыл бұрын
Nice hair, arms, pits. More shirtless vids please!
@josephjohnathan33744 жыл бұрын
bryle smith wth
@thomasebdrup5 жыл бұрын
I love you dude - but really?!?!?! Testing waterbeading after washing with a waterless wash? ..... ehm... but.... wait.... huh. Are you fooling yourself?? Did you miss the elephant in the room?
@danlc95 Жыл бұрын
How and why are they both behaving differently?
@thomasebdrup Жыл бұрын
@@danlc95 waterless wash leaves its own "protection" / residue. Therefor its beading after waterless wash
@agm60955 жыл бұрын
If the trunk was slick, the blue tape shouldn't stick.
@clawmachinetime9555 жыл бұрын
You are doing better not as feminine this time around hope you got some Short's that fit you
@5jjt5 жыл бұрын
Maybe you should pick a more macho name if you want to put others down to make your self look and feel more manly.