STOP SLAMMING THE DOORS ON YOUR CLASSIC TRUCK! | Altman Easy Latch giveaway details inside

In this video, we've partnered up with Trique Manufacturing, makers of the Altman Easy Latch, to show you how to stop slamming your doors on your classic truck. Check out the link below, use the discount code to buy a set of your own, or enter the UBT/Trique MFG GIVEAWAY and try your hand at winning your own set.
UBT / TRIQUE MFG GIVEAWAY DETAILS
There are TWO WAYS to enter the giveaway for your very own set of Trique MFG Altman Easy Latches:
1) head over to @triquemfg's Instagram profile, LIKE their profile and, on their latest post, tag a friend who needs to "stop slamming his/her doors!" - ( / triquemfg )
OR
2) head over to the link, enter your email address and you'll be entered to WIN - triquemfg.com/...
The winner will be chosen on October 15th.
If you decide you can't wait on the giveaway, Trique MFG is offering a 15% off discount code for your very own set of Altman Easy Latches. Just use the code UBT15 at checkout. triquemfg.com
Get Your UBT Shirts/Decals/Hats HERE: bit.ly/2JPDFCb
If you want to send us a care package, please use this address:
UNITED BY TRUCKS
1000 Whitlock Avenue NW
Suite 320, PMB 171
Marietta, GA 30064
#TriqueMFG #AltmanEasyLatch #UnitedByTrucks

[@RobertThomas-vr2qn]

Cool product

[@UNITEDBYTRUCKS]

Yes it is! More to come on Trique very soon.

[@HardinWet]

Super cool👍🏻

[@UNITEDBYTRUCKS]

Thanks!

[@timwilhelmson8707]

NICE

[@Kimmccormick1911]

Will these work on a 55 chevy truck?

[@dandorris8531]

Nice product, 99 percent of doors not shutting properly is mis aligned bad hinges, or crappie weather stripping. You 67-72guys try using the Honda Civic weather strip. Subscribed.

[@UNITEDBYTRUCKS]

Thanks for subscribing. I'd agree with that in part, but I've adjusted mine and have new Precision Replacement Parts weatherstripping and it is the best on the market. My doors certainly didn't shut horribly before, but they shut so much better now.

[@dandorris8531]

Check the 67-72 Chevy truck.com sight. The Honda Civic can’t remember what year but Honda still sells them new and cheap weather strip. They go on the pinch weld no glue. I agree with the precision product these Honda Fit like a glove. That door latch assembly looks nice and glad it worked for you. Check out the thread and file it in the back of your mind. It was just a friendly info.

[@mr.boombambiscuitsakajoel6017]

Teddy ain’t no turd that door latch looks like it’s finally home. Boom bam biscuits Cue the music

[@pmotorsports8276]

Made in Murrica

[@UNITEDBYTRUCKS]

No doubt about it!

[@danielviorato1333]

Thanks for the video! I installed the same kit in my 71 but mine doesn’t lock at all. With the push rod or the key. Just wondering if you have run into the same issue. Thank you

[@bdpgarage]

Do they make a weld in version?

[@wrenchmanhotrods1247]

When will they make them for square bodies.

[@oscargarza8291]

Hey where did you get those wheel

[@UNITEDBYTRUCKS]

Detroit Steel Wheels. They are Delrays.

[@upchuckchops]

Who makes the wheels on the ole truck?

[@UNITEDBYTRUCKS]

Our friends over at Detroit Steel Wheels. Made in USA (Detroit).

[@rubenfilippus2956]

Do they ship international?

[@cfuller926]

looks like my garage, fat helper sittin around w/a beer (hide it when customer shows up). I might do this if rehabin the rest of the door (ur wrds: "lipstick ona...") & they had'em 4 the '66/77 Bronk. thnx 4 da vid~

[@JasonJones-sv1xe]

Hopefully Trique will make them for 73-87’s next.

[@jameymote4598]

Very cool...😎 👍 👊

[@UNITEDBYTRUCKS]

Thanks!

[@theyellowtruck9622]

The price of the mechanism, please AND thank you.👍🏻

[@Giffey_]

This won’t work on a 64 will it?

[@UNITEDBYTRUCKS]

I believe they have them for the 60-66 chevy trucks!

[@jamescaneda9515]

Chevy and Ford is common, but what’s a closer match for a ‘51 L-110 International pickup?

[@edf1574]

Excellent video. Thanks guys.

[@UNITEDBYTRUCKS]

Thanks, Edward!

[@edf1574]

@@UNITEDBYTRUCKS Would love to see how it looks once you get it painted.

[@jeffsparks5930]

Very impressive & obviously easy to install...👍

[@Nobody-ko7rh]

More free parts

[@willw1564]

Gave you a shout out on my insta story hope you see it Robbie. Keep up the good work man.

[@UNITEDBYTRUCKS]

Awesome! Thanks!

[@DjCBlaq]

I need them to make a squarebody set.

[@UNITEDBYTRUCKS]

They've taken note of the interest.

[@DjCBlaq]

UNITED BY TRUCKS you guys are on to some good shhhh bro. If you are ever in VA definitely look me up. Mrjones804 on IG

[@ze_german2921]

Apply a little sound deadener to the inside door skin and then you can really see a Solid door shut close. Wish they made these striker for squarebody's

[@UNITEDBYTRUCKS]

Great suggestion.

[@mrd2012]

Great video!! I have a 1961 Chevy Apache and today I thought about no slamming the doors and I came across u guys , I might get me a set

[@UNITEDBYTRUCKS]

Sounds good!

[@israelrubio4866]

How can I get one of this

[@TheLoobis]

12:00 Well dude, that looks like slamming to me. What was it you were doing before? Throwing the door shut?

[@chickenfoundation9323]

Nah you had to put your whole body into it

[@davecherry7948]

Nice, cool stuff👍🍒

[@UNITEDBYTRUCKS]

Thanks!

[@travisburch6970]

Do they have something for 80's trucks ?

[@UNITEDBYTRUCKS]

Travis Burch they don’t currently

[@triquemfg]

We have been receiving requests for the 73-87 and we are looking into it.

[@travisburch6970]

Thank you

[@jamesmajors5104]

I love that truck man I just bought myself a 1968 c10 factory short bed step side

[@thomaslewis7883]

I would have soaked the release lever in oil and greased it. The door will close great, but after a few months, you won't be able to get out of your truck when the lever snaps off.

[@triquemfg]

We do recommend lubricating the latch system. As with any mechanical item that is comprised of a lot of metal on metal interaction, it is wise to keep it lubricated. We apply grease to key areas on the latches, but do not excessively oil them as we know people will be handling and painting some components, and we all know how oil and paint do not play well together. Should lube everything up during final install.

[@UNITEDBYTRUCKS]

TriqueManufacturing good to know. Thanks for clarifying. I’m sure that’s in the instructions somewhere but as you can imagine, we ditched them partway through. 🤷🏻‍♂️

[@leviwoodring6101]

Just adjust your doors right with good oem strikers. And bushings. Same affect this is for people with to much money that can't adjust thare doors right.

[@edmondpecotjr.8888]

Do they make one for a 70 International Harvester

[@UNITEDBYTRUCKS]

nope

[@edmondpecotjr.8888]

@@UNITEDBYTRUCKS thank you...

[@galegregory97]

nice latch

[@ImReady2run]

Man I tried reading through these. What is the discount code?

[@UNITEDBYTRUCKS]

UBT15

[@ImReady2run]

@@UNITEDBYTRUCKS yeah I found it shortly after my post. For some reason it didn't work.

[@jameswelch7516]

Great video

[@UNITEDBYTRUCKS]

Thank you very much!

[@hotrodbob.]

Who makes a kit like this for my 86 c10

[@UNITEDBYTRUCKS]

Nobody currently. Trique is working on it.

[@peggypatton9170]

Great video god bless

[@UNITEDBYTRUCKS]

Thank you!

[@wickedc10]

What weather stripping did you put in?

[@UNITEDBYTRUCKS]

Precision Replacement Parts. It's the best.

[@wickedc10]

UNITED BY TRUCKS i have their stuff and i have a super tight fit. Basically slamming hard lol no pun

[@TheBobbykey]

3:55 but it matches your truck

[@ping5800]

What’s the wheel and tire size/set up on teddy? it’s exactly the look I want.

[@UNITEDBYTRUCKS]

20x8 front with 4.5" backspacing with 235/45/20 and 20x9 rear with 4" backspacing with 285/40/20

[@RustyWrenches]

Just take my money. I need these

[@UNITEDBYTRUCKS]

Bahaha your truck is definitely a good candidate for a set of these.

[@dlc2724]

I need a pair of them old truck. Anybody know where to get them.

[@jeremystrickland7767]

thanks robbie for the video those look good bro

[@UNITEDBYTRUCKS]

Thanks, man!

[@jeremystrickland7767]

@@UNITEDBYTRUCKS yes sir

[@ricardovaldez5174]

Go down to the hardware store and get a piece of pex pipe 5ft cost like a dollar . You only need like 3/4 for each side it would fix those slamming doors

[@spiderchata1]

Ha ha...shouldn't you have put the rod tip in the vice to get a sharper bend?..

[@UNITEDBYTRUCKS]

Nah

[@lskiller1903]

I would suggest painting or powder coating the bare metal parts pryor to installation to prevent rust. If not it won't be long before they look like the ones taken out.

[@UNITEDBYTRUCKS]

We are absolutely going to do that, but we wanted to show the contrast of installing the new part. This whole truck is coming apart soon!

[@lskiller1903]

@@UNITEDBYTRUCKS I knew there had to be a reason y'all are to smart for that, look forward to watching the progress of the truck.

[@joshvellieux8693]

You guys ever notch a 73-91 Suburban frame?

[@UNITEDBYTRUCKS]

Have not yet, but definitely can be done.

[@punkinsgarageandpaint8299]

No I think that was John

[@UNITEDBYTRUCKS]

haha John had just come in from work. He was grabbing tools and providing all the support he could. Kinda hard for 3 dudes to work on one door, ya know? :)

[@punkinsgarageandpaint8299]

@@UNITEDBYTRUCKS yep... looks like a great group of friends doing what they love..nothing like them!

[@jonathanperez5888]

Just found this channel and already am loving it. I have an old 79 Chevy and 68 Chevy so I’m waiting for some advice and tips.

[@UNITEDBYTRUCKS]

Sweet! Thanks for tuning in!

[@jonathanperez5888]

UNITED BY TRUCKS keep it up man. This is a very well done channel with tips and how do’s and it’s really helped me understanding k5’s body.

[@UNITEDBYTRUCKS]

@@jonathanperez5888 Thanks, man! That means a lot. More content coming.

[@CrankAddict]

For the show-truck crowd, it looks like to could cut and weld it in. Thoughts?

[@UNITEDBYTRUCKS]

Potentially, yeah. You'd have to check the tolerances of that roughly 1/8" plate and how that might affect everything if you slid it in to the door more to flush it up.

[@johnnytenjobs]

Good idea. Maybe plug weld through the plate rather than round the edge. So it looks spot welded. Factry.

[@CrankAddict]

They should make these latches for squarebodies! The slamming of the doors makes the truck feel old when all your other cars have doors that shut nice and easy.

[@UNITEDBYTRUCKS]

I think they will ultimately. Stay tuned!

[@jasonstroup7551]

Cool product that has been much needed. Thanks for sharing

[@UNITEDBYTRUCKS]

No doubt about it.

[@eddyzyellowjp]

I thought I was tired of slamming doors till I saw the $350 price tag’ now it’s not that bad slamming doors. Gosh

[@UNITEDBYTRUCKS]

It's quality stuff!

[@pmotorsports8276]

Do these retain the simple "no lock your keys in the truck" feature that we lost with our Chevy/GMC trucks after 73?

[@UNITEDBYTRUCKS]

Unsure what you mean.

[@pmotorsports8276]

All our trucks up to 72 it was impossible to lock the keys inside. The door's only lock from inside with doors closed, or with the key. Next body style lost that feature

[@triquemfg]

@@pmotorsports8276 we have found that if you push your lock lever down while your door is open, then close your door, the door will lock. We didnt design the kit to do that, it just has to do with pushing the lock past the detent point and then gravity and the weight of the lock rod does the rest. Only if you initially push the lock button though.

[@adriantomlin2902]

P Motorsports your right they did lose that feature!

[@adriantomlin2902]

So answer me a question. That's an awful uglys ass plate on the door if your installing on a finished truck?!

[@johnsongarage5277]

great content your channel has keep on going with it

[@UNITEDBYTRUCKS]

Thanks, will do!

[@slagman163]

Nice! I need them for my 71...

[@UNITEDBYTRUCKS]

Be sure to enter the giveaway.

[@jamesbreternitz7901]

#classicpickuptrucks

[@UNITEDBYTRUCKS]

All day

[@DoubleRRestorations]

I like it. If I ever get a c10 or a blazer, this will be on the list of upgrades.

[@UNITEDBYTRUCKS]

Yes sir!

[@joshroland]

I need some of those. You should hear the youngins trying get in the truck. Or me just shutting the door lol. Great video as always.

[@UNITEDBYTRUCKS]

haha thanks, Josh.

[@turboflush]

Would be suprised what hinges will fix. Lol

[@ianscott7102]

hey, could i install this on a 1966 dodge d200.

[@UNITEDBYTRUCKS]

Check with Trique MFG for all applications.

[@sparkyguy277]

We need a tour of the shop!!!

[@UNITEDBYTRUCKS]

This is my truck partner's place we call the truck farm. An older video but a good bit of the shop and grounds in this one. kzbin.info/www/bejne/Y2a9mKCjdtmDj6M

[@Jonnymechanic-302]

You still slammed the door 😂😂😂

[@UNITEDBYTRUCKS]

Not even close, though at first I slammed it harder than i wanted bc that's what i was used to. If you watch to the end, you see how easy it is to actually close.

[@Jonnymechanic-302]

@@UNITEDBYTRUCKS it was a joke...you didn't get it, its cool.. and I did watch to the end and I liked and subscribed but thanks for the reply!!

[@UNITEDBYTRUCKS]

big Jon O'Dell haha so hard to tell who’s messing around and who’s not. Haha 🤦🏻‍♂️

[@tinkerongarage8694]

Wish list just got bigger. Thanks Ronnie & TTR.

[@UNITEDBYTRUCKS]

You got it! Thanks for tuning in!

[@Ekicks559]

Its robbie isnt it? Lol

[@tinkerongarage8694]

@@Ekicks559 I should really proof read more..... Sorry Robbie

[@JeepsofCalifornia]

I have never had to slam my door on my 71. All original stuff from 71. Never bought any new parts .

[@UNITEDBYTRUCKS]

Cool!

[@brentheltsley7187]

Biggest question is can I lock the door before closing it and have it stayed locked after closing? That’s always been the biggest annoyance with the old cam latch. My door closed nicely already, not this nice, but nicely. I would make the move if these did away with the whole “anti lock my keys inside” thing.

[@UNITEDBYTRUCKS]

That's actually a great question. I'll ask Trique about that.

[@triquemfg]

Brent, we did not plan it this way, and we would not refer to it as a feature, but on each kit we have tested, we were able to open the door, push down on the lock rod, and close the door. The door would then be locked. This has mostly to do with gravity and weight of the lock rod, not a design decision.

[@biglon62]

Where were they at years ago! Awesome product!!

[@UNITEDBYTRUCKS]

Right?!?!?

[@gregbenwell6173]

You know they make this stuff that people DO NOT USE AT ALL,................. it is called PB Blaster and Graphite!! Not slamming you or shaming you on your "build video" because the video so far is wonderful and very well edited!!! Btu I find a lot of "stupid people" out there all the time who thinks "lubricating your car" means "making sure there is still an oil leak spot in the driveway under it"!!! I bought a 1985 Ford F-150 off my neighbor a few years ago, which I have to mention was a woman, and I had the truck a week and went through it lubricating everything on it. A few months went by and she (the woman I bought the truck off of) asked to borrow my truck back to move a bed to her house!! She had it for a couple of hours before coming home with her new bed in it, and the first words out of her mouth was "What the F**K did you do to my truck?" At first I was taken back I thought she was honestly sincerely PISSED OFF AT ME!! But when I asked her "What the hell do you mean?" she reported to me that it seemed like a "completely different truck" driving it around!! Later she told me "The doors close without slamming them, and the steering turns with just one finger, and how come the tailgate opens as smoothly as it does, and I see you replaced the broken cable to holds the tailgate in the "down position" on the passenger side!" Truth is if more people would just do "simple stupid maintenance" on their cars these old cars wouldn't really be "that bad"!! I graphite the hell out of the door lock cylinders on EVERY CAR I OWN, I use a "two step approach" to every door latch and "release device" (hood and truck releases) on the car or truck and I grease up things like Ball Joints, tie rod ends and what ever else has a grease fitting on them including drive shafts and so on!! If you just spend an hour or two under your car you realize most "normal people" are quite stupid about "car maintenance" to begin with!! And hell in a lot of cases I have seen old cars that are 30 years old and NEVER HAD a new transmission filter in their Automatic Transmissions just because people refuse to read the owners manual to start with!!! In fact I bought a 1972 Oldsmobile Cutlass in 1992, and in the 20 years since the car was NEW nobody had ever just lubricated the door latches, hinges, hood and trunk releases and any of the key locks ON THE CAR!! I did and it made all the difference in the world!! And my "two step process" is simple, FIRST in the spring or early summer spray your latches with PB blaster and use them as normal throughout the summer. Then around late September early October (I am in New York....so before it gets COLD) hit the door lock cylinders, release devices, hinges and all that, with some powdered graphite and allow that to "work in" over the next few weeks before "cold weather" and winter snow!! Even on a car that is your "daily driver" or "winter rat beater" will "thank you" for doing this as you will NEVER had a frozen door lock or a hinge that won't open in 12 degree below zero weather!!!! And trust me when I say nothing sucks more that fighting with your hood that won't open when it is literally 13 degrees outside and you are standing in two feet of snow just trying to check your oil level on your 1999 Chevy Pick Up 4X4 Winter Rat!! Doors close so much smoother with just a little TLC no matter how you cut it!!

[@UNITEDBYTRUCKS]

Thanks for the feedback and kudos on the video. And yes, I agree that it a system that needs some maintaining, but for those who want a new, different option for their c10, this is it, in my opinion.

[@Homi-b7s]

$ 400 bucks

[@pitbullkngz7236]

Awesome seeing products to help our trucks last longer

[@UNITEDBYTRUCKS]

Yes sir!

[@martinjosemontielnavarro2653]

🇻🇪 ativado 🇻🇪 united by trucks 🇻🇪 👍👍👍

[@UNITEDBYTRUCKS]

haha thanks!

[@martinjosemontielnavarro2653]

Muy buenos tus consejos para seguir dandoles vida a todos los modelos chevy c 10 un clasico q no pasara de moda 👍👍👍🇻🇪

[@adamnewcom2999]

The company I work for supplies Trique with all there fasteners! Russellville Arkansas

[@UNITEDBYTRUCKS]

Sweet!

[@bobbella4812]

Kind of curious how new your door rubbers are. Mine are maybe a summer old and they are still very very spongy and push door off easily.

[@UNITEDBYTRUCKS]

Mine are probably two months old. Precision Replacement Parts. Would most definitely use them again.

[@bebereyes5514]

Now, you gotta paint that truck up in new paint to match those shiny gizmos.

[@UNITEDBYTRUCKS]

No way. I'll make those shiny gizmos a little less shiny my truck

[@robbygee2539]

@@UNITEDBYTRUCKS - I will NEVER paint over the original factory paint on my 67. Once you do that, it is GONE FOREVER. People ask me when I am going to paint it? I say, "why???"

[@UNITEDBYTRUCKS]

Robby Gee exactly. Only original once.

[@flatlandsquares6730]

Hell yea that's awesome

[@UNITEDBYTRUCKS]

Thanks, Micah!

[@michaelduty1160]

Wish they made them for mopar. Need new ones for my d150

[@UNITEDBYTRUCKS]

I hear that!

[@punkinsgarageandpaint8299]

Looks like TTR is making this a spectator sport!

[@UNITEDBYTRUCKS]

Nah, TTR was in there cutting it up and lending all the hands.

[@OldeCarrGuy]

From experience, the old sqrbdy's could benefit from this setup as well! Great giveaway to! Thanks Guys!

[@UNITEDBYTRUCKS]

I agree, Jason. Trique has taken note of the squarebody interest.

[@cjleon1104]

PEX (just kidding)

[@dakotapeek6904]

@@UNITEDBYTRUCKS I was going to say the same thing. Just bought a 83 last night and planned on missing out on this part of the experience but they dont have them yet

[@doinker1972]

It sure looks like a good upgrade, but I can't justify the high cost. As said in other comments, massaging the oem latches requires cleaning and adjustment at almost no cost for similar results.

[@toddgillatpoorboyzcustoms5689]

Great product will come in handy for me and the kids, keep the videos coming Robbie enjoy them as usual.

[@UNITEDBYTRUCKS]

Heck yeah! Thanks, todd.

[@ericyirka684]

Christ im gonna be 4k in doors before its all said and done lol

[@simoncdn7483]

yeahhhhhh content with you guys doing work high five

[@UNITEDBYTRUCKS]

Thanks!

[@texasgrown2021]

Could you do the same thing on a 1981 Chevy c10?

[@UNITEDBYTRUCKS]

TexasGrown hill not currently available for squarebodies

[@texasgrown2021]

@@UNITEDBYTRUCKS oh ok thanks

[@louisthomas1829]

None

[@louisthomas1829]

Love the easy latch kit . Can’t wait to get a pair for my truck. Thank you for showing this on your show

[@hortenciatalabera2448]

What size are those rims they look 🔥 on your truck

[@UNITEDBYTRUCKS]

haha thanks. They are detroit steel wheels. All the details in this video. kzbin.info/www/bejne/gnfbgayqe7FgZ6s

[@JacksonLane02]

nice setup. teddy needs some new door panels.lol. keep up the awesome work

[@UNITEDBYTRUCKS]

The door panels are the best part about the interior haha Teddy needs rust repair.

[@BuyitBreakitFixit]

What a difference in closing the door. great upgrade for the truck. Hey man, I want to send you one of my channel shirts and stickers. I think you will like them. D you have an address I can send to? Thanks

[@UNITEDBYTRUCKS]

Thanks, man. And yup. It's down in the description of the video.

[@ryanklett5277]

Tried to upgrade my latches. The screws were rusted solid. Two of the three screws on the drivers side had actually rusted around the heads of the screws. What a nightmare. Sure this is not a cheap option but with the discount code I got a set for about $300. Thanks Guys!

[@TheBonsaiZone]

Closes just like a Ford now!

[@UNITEDBYTRUCKS]

bahahahaha

[@deankay4434]

If your Ford doesn’t run, the latches don’t wear out! Did they start using rubber door seals or do they still use buffalo leather strips?

[@TheBonsaiZone]

@@deankay4434 Burned!

[@deankay4434]

@@TheBonsaiZone No, Fords are burned. It’s the only way to get the cooties out of them.

[@timmyelder4476]

Awesome

[@glencoit5811]

Just curious, where did Teddy’s name come from?

[@UNITEDBYTRUCKS]

From the teddy bear hanging from the rear view when i got him. Still hangs there to this day. Mangy ol bear hanging from a giant fish hook.

[@glencoit5811]

UNITED BY TRUCKS haha awesome! Thanks for the reply, killer channel!

[@MrClarkisgod]

Nah... We took apart the mechanism on my brothers truck, wire wheeled it all, greased it back up, and threw it back together. I'm not into chopping extra holes in the doors when you can just recondition the old parts and keep it moving.

[@UNITEDBYTRUCKS]

All good, man! That's what works for you.

[@troychampion]

great! now fix the hoods for 77 gmc (square body) chevy ;) thx in advance, :D

[@workingmansrestorations7071]

I have a 73 and 79 squarebody... And 84 and 90... But the older ones, i just keep alot of wd40 on them. Havent bent a hood in a long time.

[@pmotorsports8276]

Not really a fix, but take the springs out and prop with stick

[@9T5Z28]

I am ordering my truck a set . Thanks for the discount code .

[@UNITEDBYTRUCKS]

heck yeah! Thanks for tuning in.

[@daddyshovel7995]

My old Chevy truck doors always work good, my problem is having to say please don't slam the door then BAMM.!!

[@UNITEDBYTRUCKS]

For real!

[@poolesperformance6146]

Robbie your going to have to start uploading vids before lunch. I need some good content to watch during my lunch hours. Haha just kidding..thanks for the vids ..keep em coming

[@UNITEDBYTRUCKS]

haha I'm trying to get them up earlier in the day but the day job sorta gets in the way.

[@beaudarvel7778]

Would love to know how to get a ubt sticker for my all original 83 custom deluxe, I bought the other day out of concord nc Sunday. Yall got me amped on building my dream truck with my son's, thanks for the content never stop. WDE!

[@UNITEDBYTRUCKS]

Heck yeah! We don't plan on stopping. Please visit www.unitedbytrucks.com for all your UBT gear.

[@allantaylor3288]

Great product and an easy install over a few beers😂 only problem now is the rest of Teddy is looking a little average, you’ve started something now 😂👍

[@UNITEDBYTRUCKS]

haha average? Teddy is far from average, Allan. lol

[@allantaylor3288]

Didn’t mean that in a bad way

[@UNITEDBYTRUCKS]

@@allantaylor3288 oh, i know! Just giving you a hard time. :)

[@PapaSmurf337]

Oh what my square body ain't classic enough for an Altman Easy Latch? fawk I got all excited for nothing

[@UNITEDBYTRUCKS]

Easy now. They’re working on it

[@pablopickasso4098]

350 a pop? I'll keep slamming

[@workingmansrestorations7071]

That does buy alot of wd40

[@turbo_bikini]

@@workingmansrestorations7071 HAHA lmao!