Stop the Theft of your Mopar - New Z Automotive Tazer PIN Lock

I've been using this New feature release from zAutomotive for the last few weeks. we can now prevent our Dodge Challenger, Charger, Durango, Jeep and Ram from being stolen with the latest threats like Key Cloning and...
🔴 Stop your kids from sneaking the car out
🔴 Prevent major loss from Car Jacking
🔴 Stop opportunistic thieves who see your car running outside the coffee shop.
🔴 Affiliate Links to Products seen in This video 🔴
1. Get your Z Automotive Tazer here! - bit.ly/TazerWPD
2. SGW Extension Cable - www.zautomotive.com/product/z...
3. Carlock 2nd gen Advanced Tracker - amzn.to/3l6oXut
Table of Contents
0:01 Video Intro
1:09 PIN Lock explained and in action
2:11 Light show Alert
2:32 Car Jacking mode Explained
4:12 Car Jacking Mode in Action
5:15 How to Update the Firmware
5:43 zAutomotive and WorkPlayDrive Partnership and Affiliate disclaimer
7:09 How to Install the Tazer DT in your Ram
8:00 How to Set the PIN
9:13 How to Clear the PIN
9:46 How to Enter the PIN
10:16 What if I Forget my PIN
11:55 Closing
🔴 WorkPlayDrive APPROVED Products 🔴
Luxe Auto Concepts - Get your tint kits here bit.ly/2lYCvux
5% Discount code WPD2022
Auxbeam Lighting - auxbeam.com/?ref=workplaydrive
10% Discount code = WPD10
BlackBoxMyCar - www.blackboxmycar.com/?ref:wo...
Discount Code: WorkPlayDrive for 5% off orders over $250
~*~*~*~*~*~ Folow us ~*~*~*~*~*~
www.workplaydrive.com
/ workplaydrive
/ workplaydriv. .
/ workplaydrive
~*~*~*~*~*~ Music Info ~*~*~*~*~*~
End Screen
🎵 Beats By Shocka252 🎵 / livinpro. .
/ amongstkingz252
Big Horn, HFE, Laramie, Limited, Limited Longhorn, Lone Star, Rebel, TRX, Tradesman, Jeep Grand Cherokee, Ram 2500, Ram 3500 2008 Dodge Challenger 2009 Dodge Challenger 2010 Dodge Challenger 2011 Dodge Challenger 2012 Dodge Challenger 2013 Dodge Challenger 2014 Dodge Challenger 2015 Dodge Challenger 2016 Dodge Challenger 2017 Dodge Challenger 2018 Dodge Challenger 2019 Dodge Challenger Widebody Hellcat Demon Widebody Scat Pack Dodge Charger 2005 Dodge Mangum R/T AWD, 2002 Pontiac Firebird Trans Am

[@ShaneWasserman]

Another excellent video Mike! Very well done as always. I'll definitely be doing the update to my TaZer as soon as it's available.

[@josephboccio6392]

Absolutely should have the horn blowing like crazy. The lights are good but the horn brings attention to it.

[@shawnhoward8484]

Yes we do idea yes you need or that yes

[@WorkPlayDrive]

The horn has been added to the latest firmware and it’s random beeps which definitely catches peoples attention 👍

[@medicchester]

​@@WorkPlayDrivethank god

[@tsims73]

Thanks for the info. I was just about to sell my Tazer...glad I didn't. This added feature really makes the Tazer worth it.

[@WorkPlayDrive]

Yes sir, The fun of a light show may fade, but the joy of not having someone steal your car lasts forever ;)

[@Huggiebearups1]

Mike you are the man we all appreciate what you do for us thanks brother!!😁😎

[@WorkPlayDrive]

Glad to help 💪

[@TigerNgtMare]

Best video on line. Thanks!!

[@WorkPlayDrive]

Thank you 🙏

[@stitgibekili]

This is one awesome feature! Thanks for the info!!!

[@WorkPlayDrive]

💪

[@melikestuff8389]

That actually looks like a legitimate option, thank you.

[@eunit08]

Finally I see a reason to get one. Thanks for sharing

[@WorkPlayDrive]

You bet

[@63besgasman]

Awesome! Looking forward to the Challenger update

[@WorkPlayDrive]

Cliff 🙌👋

[@392ceez8]

when will it be out? any clue?

[@63besgasman]

Haha had a fun time getting it inspected. I realized as I got in to go there that I would have to shut off the PIN Lock first. No problem, there's usually a bit of a wait. Well, I guess very few others wanted to spend their Friday before Christmas at the DMV so I got right in. I tried to explain to the person about the code and not surprisingly they weren't overly happy. Their ire was then shifted to the person behind me in a commercial vehicle who needed to go to the commercial lanes instead. While they were dealing with that I tried to go through the disable process but couldn't remember offhand how to get into the menu to begin with. When they came back they told me to just leave the car running which I did. Moments later all the lights are flashing and it turns out I forgot to take the key fob out and still had it in my pocket. So I had to go back to the car, give them the fob, and reach through the window to enter the code. Despite all that, I did pass 😀

[@63besgasman]

Actually just now thinking of it I could have just unplugged it, right?

[@WorkPlayDrive]

Yes but the next firmware version will have some added features. My last inspection I got a 20 minute lecture from the tech about how I shouldn’t keep my insurance cards connected. (2 cards on 1 page). 😂😂😂

[@BBHemisnJets]

Promoted this video (on FB) about this great LOCK OUT Find ! Thxs Bro. From NY/CO.

[@WorkPlayDrive]

Thank you 💪

[@Boostedm3nace]

Thanks man. I’m putting this on my hellcat this weekend

[@WorkPlayDrive]

💪

[@craiglee2939]

Thanks bro! Waiting on the Challenger model.

[@WorkPlayDrive]

No need to wait bit.ly/TazerWPD the firmware for the challenger model is already released.

[@geargrinders6562]

This was a great demonstration. Looking now to buy the product.

[@WorkPlayDrive]

Thank you

[@paulbare6371]

Perfect thank you sir

[@eblkheart]

Just an update: I updated the tazer and put this into my 2019 Scat. Works flawlessly. Thank you for the heads up on this!

[@XxdannyXxable]

Does yours still accelerate a little then brake and reverse still works?

[@XxdannyXxable]

On mine it does brake but still let’s the car drive but brakes every 3 secs and reverse works still

[@JonathanDiaz-vm5mb]

But it doesn’t matter because the video shows you how to get around the tazer and steal your car just takes them 10 extra minutes

[@CTHellcat]

This is fantastic! So glad I bought a tazer.

[@WorkPlayDrive]

👍

[@RationalMinded]

It's insane to me that Dodge hasn't done anything about the thefts... Will be looking into this for sure, thanks man 🙏🏾

[@WorkPlayDrive]

Well, it could be worse 😂 we could be in the same boat as all the KIAs where you can use an iPhone charger to start the car and there is a TikTok challenge to steal them.

[@RationalMinded]

@@WorkPlayDrive That's crazy as hell too! Can't have anything nowadays.

[@ukayhemi6385]

If you know you know, but they do have a solution. Get the system update to lock out programming keys

[@dalcero7]

@@WorkPlayDrive Just got my Kia stolen too. Damn!

[@JonathanDiaz-vm5mb]

For what they just showed how to prevent the theft in this video and at the same time showed the thief how to avoid the tazer and steal your car🤦🏻‍♂️🤦🏻‍♂️

[@zautomotive]

👍🏻 well made video, as always

[@WorkPlayDrive]

Sorry about all that extra work on a Sunday night with you keeping up on all those comments ☺️

[@DextarRogue]

I think the horn honk would be awesome but only if they tried to drive the car off without the pin if that's possible. That way you don't look like a bozo with the horn going off while trying to unlock your car.

[@zautomotive]

@@DextarRogue or just put the pin in before the countdown runs out 😅

[@DextarRogue]

@@zautomotive I guess! :D

[@WorkPlayDrive]

They’re making it something we can enable/disable so we can do what works best for us.

[@James-Orr]

Dang it! I will need to buy another Tazer again haha. I have a Redeye and hate walking away from it in some areas. Your son is growing like a weed since your older Challenger videos.

[@WorkPlayDrive]

Yeah, he’s growing up way too fast.

[@RSSLLWF4]

ordered thanks

[@Sunkist75]

That's cool..my semi truck has the same thing takes a code to unlock the ignition

[@63besgasman]

All set up and it works great! The only thing is I don't get the "buzzkill" sound; it just locks down silently. Still just as effective

[@WorkPlayDrive]

Nice! There’s some cool updates coming to this feature very soon. Can’t wait to start testing them out.

[@resdawgs]

Ok so its 4-6 pin actions i can program. Nice. All uour video’s are great. I appreciate it. Do you recommend obd port cover and neutral cover still?

[@WorkPlayDrive]

Neautal pull cover will also help on the challengers and chargers to block from bump theft

[@Cryptodegen2A]

Thanks for another informative video! Also, is it my imagination or are you doing a lot of voice over work on KZbin of late? If so, congrats!

[@WorkPlayDrive]

Thank you. Airport rerouted traffic over my neighborhood, I can’t got more than 90 seconds without a plane interrupting. Now I just crank music and enjoy the install then I simplify and narrate afterwards.

[@greganderson1989]

Thinking about buying one for my 2015 hellcat.

[@ssparrrkyy]

awsome...another deterrent ...YEAH.

[@resdawgs]

Cool. I like this. Can you please tell them to fix the unamrry page on the website. I would greatly appreciate it.

[@obertosiciliano1243]

This is awesome, and something Dodge should have come out with years ago. IGLA System works in the same fashion, using a 6-20 push (pin) code setting. Without the correct pin code the thief will not have access to the vehicle's control system, rendering the vehicle completely locked. Thieves will not be able to program new key fobs either. In fact, neither will the dealerships. Only downside to this system is you would have to tow the vehicle back to the installer and he will have to do a reset for you, which will probably cost more money. I'm guessing the higher pin code setting you have, the greater probability there is of forgetting the code. Install price for IGLA System is $1500.00 Also comes with a drone (real time) tracking system. Carjacking function works the same as Z taser's, but you will have to disable the vehicle off of your phone (app) once the vehicle comes to a complete stop. I'm guessing dodge's new ev's will not allow any third party functions to work with the vehicle, strong arming customers to pay top dollar for modofications 😠 As always, excellent info and video. I'll keep an eye out for the upgrade from Z Automotive.

[@criminalscum8472]

Igla is hands down the best on the market

[@obertosiciliano1243]

@@criminalscum8472 Facts 💯

[@Hellcatblk_]

Great video..... definitely hope they can eventually come up with a auto shut down if the tazer is removed..... also kinda cringed when I seen you put the way to disable the code..... most thrives are right inside our Mopar community...... take that part out bro

[@WorkPlayDrive]

The best part about zAutomotive is they are always improving based on feedback. Give it a few weeks and they will make it even better

[@user-ik4br3nk2w]

"wait ten mins" what a deal breaker since thieves see this too! should be a reset code sent to the registered owners phone

[@WorkPlayDrive]

Sure but sitting in the vehicle for 10 minutes while the horn is beeping and the lights are flashing makes it much more difficult (new functionality added with the latest release.)

[@user-ik4br3nk2w]

@@WorkPlayDrive does your link bring me to the newest version? id like to buy one. thanks.

[@WorkPlayDrive]

My link brings you to the site where you can purchase one. When you receive it that same site will have a firmware upgrade for the latest version. Firmware and feature updates have always been free. I get the same features on the Tazer I got in 2015 as I do on the one I picked up this year.

[@Flexxx365]

Ok now what happens if the module is the first thing a thief would look for? What happens if they unplug it and toss it and plug in the original equipment.

[@spasm027]

Here for this exact comment. You can hide it…but These thieves are obviously smart. Won’t be long before this device becomes useless.

[@medicchester]

Good question.

[@kollegeboi89]

which product to i pick for a 2016 challenger hell cat ? i need to install this asap, and will it be the same process ?

[@lawrencefalcomer1226]

Hi Mike. Great video. Just picked up a 2023 Ram. Any idea when this will be compatible with new Rams?

[@WorkPlayDrive]

You can email them directly I’m sure if it’s not already working they’re actively working on it.

[@bryanperez2268]

Is the pin lock a live setting ? Or we can actually remove the tazer and it will still work ?

[@johnboysoftware7329]

What happens when you remote start your car? Does the countdown w/flashers start when remote started, when a door is opened, when the Start button is pressed, or when?

[@WorkPlayDrive]

No impact to remote start, the current functionality starts when you hit the start button.

[@MrBaloo2k]

Hello Mike, first of all great videos. Now my question is there a Tazr option for the 2012 Dodge Challenger?

[@WorkPlayDrive]

Thank you, The Tazer supports 2011-2023 Dodge Charger 💪

[@MrBaloo2k]

@@WorkPlayDrive Thank you so very much.

[@MrBaloo2k]

@@WorkPlayDrive Just wish it would support the 2012 Dodge Challenger RT

[@jimmywolfblack5096]

Is there any way to make this work on a 2018 Ram or are you guys looking into it at all? Just got Tazer Ram and looking for the extra security features like the video above. Great video and features for sure but hopefully this can be set up for my truck in the future if not already. Thanks and FYI found you on TikTok and you have opened my truck to new options I never knew was out there.

[@WorkPlayDrive]

awesome. They are perfecting the Tazer and the DT but the older models require different development. Then best way is to follow zAutomotive to track their updates.

[@skywalker772]

That video at the very beginning, it is how my Hellcat was stolen 😂

[@WorkPlayDrive]

Sorry 🥲

[@skywalker772]

@@WorkPlayDrive No worries! I got another one! It’s good you’re making these videos on how to protect your mopar from being stolen. Very helpful stuff! I didn’t think it can happen to, until they took it from me. I installed IGLA, it’s a PIN code as well, but it doesn’t let you start the car until you entered the PIN code.

[@traza5190]

Hi Mike, thanks for the video. Can I use it on my lexus RX 350 2022? Please let me know as the thieves already attempted to steal it. Much appreciated

[@WorkPlayDrive]

Sorry this product is made for dodge, jeep and ram.

[@marcaosoltura]

Great. Now you just tough the thieves where it is installed!

[@southernadventureawaits]

Thanks for sharing. Do you know if it's possible to install a Tazer & a kill switch? Or would those interfere?

[@WorkPlayDrive]

You can install a kill switch along with the Tazer as long as you’re doing something like a fuel line kill.

[@southernadventureawaits]

@@WorkPlayDrive ok great thanks

[@alanc392]

Haven't seen anyone ask yet if/how this works on a manual. I have a 2021 widebody scat with the 6 speed. Seeing as there's obviously no "switch to drive" (PRND), under what scenario do the brakes lock up? Simply trying to release the clutch in first prior to inputting the pin? This would obviously force a stall; so then what happens in the Tazer's brain when the Challenger stalls? Looking to buy one of these and just curious. Appreciate the video Mike!

[@WorkPlayDrive]

Thank you, with a manual it triggers when you hit the brake. 👍

[@nastipete1369]

Great videos. Love the info you provide on your videos. I do have the taser and waiting for warm weather to install my tazer and start using the new pin feature. I was checking the Toyota key fob and they have a way to temporarily disable the radio frequency from the remote via a few presses of the buttons. This would be another good feature for the tazer. I know it might be over kill but an extra security feature wouldn’t hurt. See if Z Automotive would add this feature on the Tazer. Thanks again for your great informative videos

[@WorkPlayDrive]

Thank you. Are you saying the remote no longer sends a signal after the key combo?

[@nastipete1369]

@@WorkPlayDrive correct. You can turn it on or off at anytime

[@nastipete1369]

@@WorkPlayDrive here’s the video link regarding this feature kzbin.info/www/bejne/m2Wce2Onbtp4l7s

[@nastipete1369]

@@WorkPlayDrive correct

[@danielfletcher1384]

Hey Mike, Great Video. I'm installing this today on my 21 Rebel. It's been 4 months since you posted the video, so I'm wondering if the update to add the horn has been released, or if it's still pending? Thanks in advance!

[@WorkPlayDrive]

an option to enable the horn, disable the accelerator, plus a bunch of new features are in the current unreleased beta firmware. I’m testing in my RAM right now, I’m not exactly sure when they’re releasing it, but it should be very soon.

[@danielfletcher1384]

@@WorkPlayDrive Thanks for the update! Looking forward to more features.

[@Chrysler300CSRT]

Will this work with a 2023 chrysler 300? The anti theft feature? You mentioned all the other brands

[@coolwrld302]

Also posted this question on your Facebook page. Any idea whether this feature will come to the Burnboxes as well?

[@WorkPlayDrive]

You probably should ask them directly but considering the Burn box is the lower cost feature lite alternative. I’m assuming you have to buy the full featured taser to get this option.

[@brandonmurray4895]

Which Tazer do I purchase for a 2019 Challenger hellcat? I see several types on the website. TIA!

[@392ceez8]

Do you know when the challenger update comes out? I updated and checked but I don’t have the live setting on my tazer so I guess it’s not out yet. Do u know ?

[@WorkPlayDrive]

It’s out you need to follow the instructions on how to update your Tazer in this video. Once you update it the features become available.

[@woggersoverlandadventures]

Thank you for the informative video! Not sure if it is a coding error or not but I found that when I press my stereo mute button twice it turns on my backup camera?? Did not see this as a feature so might be a coding error. I have also found since the install of my Jeep JLU 2021 Wrangler Rubicon Tazer JL Mini that at times when I use my door handle button to lock the vehicle sometimes everything does not shut down (Dash, shifter gear lights and??) that it drains my battery overnight. Has happened 3 times since the install of the Tazer JL Mini. Just an FYI if you talk with them.

[@WorkPlayDrive]

My recommendation is to contact support. There might be something different about your specific Jeep that needs to be coded. There should be an option to turn off the mute button function I can’t see the manual at the moment. but it should be in there

[@therhino9661]

Awsome video. Will this update work on the 11-14 Chargers? (I have a 2012 R/T Road & Track). Thanks

[@WorkPlayDrive]

It's in progress for the 11-14 chargers as well. Not sure on the release date though.

[@joezizzadoro7628]

11-14 would have been with this update but my 11 decided to die; once fixed (maybe this week) I’ll get right on it.

[@therhino9661]

@@joezizzadoro7628 GREAT news, Sir

[@therhino9661]

@@WorkPlayDrive I look forward to the new release, Sir

[@Wisco_Ram_Page]

So curious I have a 15 hellcat challenger and if I use the obd2 connector instead of the trunk for security does it always have to be plugged in or do I plug it in and load it to the car and take it back out don’t know but I’m thinking it may be in the way if it has to stay plugged in

[@WorkPlayDrive]

For this function of work, it always has to be plugged in. You can grab a OBD two right angle cable to tuck it up in the dashboard. 👉 amzn.to/4000MQR But keeping it in the trunk hidden is the best bet for security purposes

[@NeedForSpeed.2004]

Honestly this is cool. I wonder if it’s possible for the Tazer to be made to utilize the engine immobilizer and/or kill the engine if necessary.

[@ssparrrkyy]

Is there a valet mode?

[@kdubzyt9133]

Does this work for the 2013 chargers?

[@1of1GT]

I just bought the Carlock device and the power cable to hide it inside the trunk of my 2022 Dodge Charger GT. I know you have a vid where you installed it in the trunk of your Challenger. Can you tell me what fuse you tapped into? Or did you just add an inline fuse? and if so, what amp fuse did you use?

[@WorkPlayDrive]

CarLock would work with a 5 amp fuse. In the challenger I used the ZAutomotive taser double bypass. The CarLock only needs the power and ground which I show in this video. kzbin.info/www/bejne/Z5SohH-FeNCamLssi=-7gwO49HjoVsfjhk

[@1of1GT]

Thanks. Your vids are very well done and will no doubt be very useful in assisting me with my installs this weekend. I went on a bit of an upgrade spree and ordered the Carlock, Tazer with the Double By-pass and the Aux buttons, and the Hupejos V8 Plus 4 channel dashcam with the Radar Detection kit. Everything arrives by this Saturday so a I'm looking forward to the installs this weekend. Carlock customer support stated the device included an internal fuse so no inline fuse was necessary and that the power cable adapter could be wired directly to the positive and negative battery terminals. Do you see any issues with me doing that?

[@anthonyd9047]

When I worked in a Chrysler dealership and I think 18 or 19 newer charger challenger etc. Have the factory option for limp mode when stolen. You use the uconnect app for 392 srt hellcat cars for theft prevention. But I want to know if the the device will still work if it gets unplugged or disconnected from the vehicle

[@WorkPlayDrive]

I had some bad experience with UConnect so I use CarLock for alerting me and locating my cars in real time. And now the Tazer for disabling it. At the moment if you disconnect it removes the feature. But stay turned in the next few weeks there are some cool features coming in a Free update 🤫

[@anthonyd9047]

@@WorkPlayDrive thanks and will do. My other question is that will it still work for the manual transmission for car jack mode or if it'll Still lock up and use the ABS. I'd say yes because of linelock

[@SoonersR]

Does the unit have to be plugged in for the PIN and carjacking functions to work? (If someone disconnects the unit)?

[@WorkPlayDrive]

Yes, it needs to be plugged in. And if you’re using it for antitheft, it’s recommended to hide the taser using either the extension cable or the double bypass for the challenger models.

[@stevenb.182]

Will this update be available for the "DS" version of the RAM, using the appropriate Tazer ???

[@WorkPlayDrive]

The Tazer Ram will be getting this update, but they don’t have a firm date on its release.

[@stevenb.182]

@@WorkPlayDrive thanks for the reply !!! That's good news !!!

[@rickylee2477]

Now that I know your PIN code I’ll contact my car thief friends near you.

[@WorkPlayDrive]

It’s a good thing I know how to change it 🤨

[@samwms2116]

Question: Does it lock the manual parking brake or the foot pedal wheel brakes?

[@WorkPlayDrive]

It applies the front brakes using the mater cylinder it does not use the parking brake

[@JohnRodriguez-jd4ib]

Thanks, Mike. Your vid convinced me to order the Tazer if only for the PIN code feature alone. A couple of questions I hope you can answer. Before starting the car, if a thief locates and pulls the Tazer from the OBD port, either from under the dash or from the double bypass harness installed in the trunk, will the PIN lock still work? Can the Tazer lock the brakes after parking the car and turning off the ignition, so it can't pushed into the street, or loaded onto a flatbed? Thanks again!

[@WorkPlayDrive]

With the new firmware they added a feature that kills the accelerator even if the Tazer is removed, the car will not be drivable until it's reinstalled and the PIN entered. It will also beep the horn randomly and flash the lights to draw attention if you don't enter the PIN. When parked with the current firmware you cannot enable the brakes to lock them up. You can disable the accelerator, but that won't help with the flatbed situation..

[@JohnRodriguez-jd4ib]

@@WorkPlayDrive Thanks Mike. Is that version 2.5.8, issued last December?

[@WorkPlayDrive]

It should be released soon. I’m currently using the Beta firmware.

[@AboveThaTop]

Wouldn’t the alarm and horn 🚨 still go off while on a flatbed lol?

[@_flexxx_]

So... what happens if there is a car jacking scenario... and said car jackers pull off.... 30 secs later the shut down occurs..... and lets assume they are aware that this happened due to a tazer device.... so whats stopping them from getting under the dash and unplugging the tazer security module? will the lock out still be in effect? or will that disable the tazer security features and allow them to keep going?

[@WorkPlayDrive]

Nothing is stopping them, except time. All the lights are flashing and soon they will add a horn alert option to draw more attention. they will need to find where I hid it and cut out all the Zip ties and Tessa tape I used to secure it up in my dashboard. 😏

[@Auzzie_]

You can also get the double bypass harness (which is required for 2018+ models) and install the tazer in the trunk. Time is everything to these people, it's not about stopping them but making it take too long for their comfort.

[@young_m.c.9467]

So once the pin is set can I take the tazer off? Or does it have to stay plugged in for the pin to work?

[@WorkPlayDrive]

This is a live feature controlled by the Tazer, the Tazer needs to be plugged in and preferably hidden.

[@72armydad]

Any way of making a video for a 23 rebel cuss all new electronics

[@jontewashington7478]

Will this work on the taser for the 2015 dodge challenger SCATPACK model ?

[@WorkPlayDrive]

Yes it will 👍

[@KC1Khalil]

Can you use 1 tazer to put this on multiple vehicles of yours or do you have to leave it plugged in and buy another tazer for another car?

[@WorkPlayDrive]

You can change the tazer from one vehicle to another. You just can’t use it on multiple vehicles at the same. So any features that you were using need to be disabled. The taser needs to be unmarried, and then you can use it on another vehicle.

[@markmiller2149]

The horn needs to come on and is there a feature to put a loud siren in it?

[@WorkPlayDrive]

The horn is now an option to enable in the lates firmware and it’s annoying 👍 they went with random long and short beeps. It definitely gets people looking when I forget .

[@markmiller2149]

@@WorkPlayDrive Good deal...beep beep!

[@eurospeed4532]

Mike I have a tazer from years ago . Will that work for this function too or do I need to buy this new one for this

[@WorkPlayDrive]

It will work on your older Tazer. I updated my Tazer from 2016 and have it running in a friends challenger for testing.

[@eurospeed4532]

@@WorkPlayDrive thanks ! I have that original tazer for years now ! I am not tech savvy at all i have never ever done an update on that tazer so I am wondering if I do not need to do any previous updates and can go straight into this update which gives me that security feature ! I am wondering if u can do one day a video on this original tazer upgrade and show on video how I do this update step by step based on a tazer which has never been updated Would be awesome

[@waynemeyers7207]

Does it work on a 2023 ram 1500

[@Imwright720]

It’s easy to prevent. Problem is your trying to use tech to beat tech. Think old school. You can’t take mine without a tow truck. Working on that.

[@agentmuzz]

This will stop most attempts. I can think of a few ways around this. More effective route is intercepting the positive wire to the fuel pump, insert a relay, then hide the relay switch somewhere. No fuel, no moving.

[@WorkPlayDrive]

Cutoff relay is always a solid plan, but some people way want an easier DIY option. I’m working with their new firmware and it disables the accelerator pedal while beeping the horn as well.

[@richnolen6862]

What if the thief knows about this product and disconnects it and reconnects the default security module. Have they now defeated the system?

[@americanpatriot8996]

What if I own 2 jeep wrangler JL’s - do I have to buy 2 of them or can I use the one Tazer I purchased for both of my vehicles ?????

[@WorkPlayDrive]

You need to have one taser for each vehicle. Unless you only drive one at a time and are willing to switch the tazer back-and-forth between the vehicles when you need access to the features.

[@joeg2865]

Does carjack mode work if you get pulled out of car & the fob remains with vehicle??

[@WorkPlayDrive]

The fob Has to be out of the vehicle. But if enough people reach out to them with concerns, you might be able to have them at an option to disable upon opening driver door.

[@alanadams4404]

You have done segments for Tazer and Car Lock, so I have to ask , if someone can only afford one, which one would suggest?

[@WorkPlayDrive]

The Tazer will keep your car from moving if someone wants to steal it (without a tow rig) and has a higher up front cost. The CarLock will tell you when your car is being tampered with and also tell you it’s real-time location. It has a low upfront cost but has a monthly service fee. It depends on what’s important to you. If I could have only 1 the CarLock is the direction I would go. I love the silent tracking, driving alerts, driving logs etc.

[@trackday627]

Since a Charger and Challenger don't have an e-brake, what stops the vehicle? Is it the ABS as I read in another comment?

[@joezizzadoro7628]

E-Brake wasn’t good enough, we kick on the ABS pump and lock all 4 wheels with max pressure so there is no way you’re going anywhere.

[@trackday627]

@@joezizzadoro7628 when I cycle the ABS to bleed the module it makes a rapid fire solenoid noise. I'd think that takes a lot of power and isn't designed to hold for more than a few seconds. Do you keep it pumping the brakes indefinitely?

[@tkblade7230]

I wanted to buy a taser for the wife’s Ram but couldn’t justify the cost as she has no interest in any of the features. Now that this will be available I will be getting one. Any idea if the the Hellcat burn box will get this update?

[@WorkPlayDrive]

You may want to check with them. The Burn box is a feature limited product so I’m thinking they are only adding this to the full features Tazer.

[@tkblade7230]

@@WorkPlayDrive I’ll check with them. Thanks

[@GluedBarstool]

When is it available for 2015 Scatpacks?

[@WorkPlayDrive]

Very soon, I have the beta running on my old 2016 Tazer on a challenger. They just want to make sure all the tweaks are worked out.

[@ItsMavicBrah]

I am guessing this does not lock the vehicle out of neutral? So they could turn it off then back on shift to N then roll it off?

[@WorkPlayDrive]

This locks the brakes and the latest update will disable the accelerator as well. You can turn it off and on as much as you want. You’re not going anywhere.

[@datboibg21]

Works for a 21 jeep TH?

[@hellraisen_hemi7745]

I saw this was asked but just wanted more clarification. 6MT once the start button is pressed and Challenger is started the countdown starts. The thief can put in gear at this point and start driving but when the brake pedal is pressed it locks up the brakes? But not till the brake is pressed? That should happen when the clutch is pressed! Also I heard the remote start is bricking auto challengers and chargers.. had this been fixed?

[@WorkPlayDrive]

As soon as you try to put the car in gear it locks instantly and with the new update it disables the gas pedal. With the manual it locks when you hit the brakes. I’m not sure 🤔 of the issue but they released an update you may want to check the groups for that one.

[@hellraisen_hemi7745]

This feature alone is worth the price of the Tazer and bypass. For more pin code options I would suggest getting the Stealth Aux buttons!

[@DextarRogue]

Being a live setting, pulling the tazer out would make it useless right? All the more reason to add the double bypass in the trunk even if you don't need it and hide the tazer!

[@WorkPlayDrive]

For now yes pulling the Tazer will disable which is why they recommend hiding it.

[@Marshal7860]

So what happens if they remove the case. And plug it back into the original.

[@jcrisen5417]

Any idea when this will be a available for 22 scat packs?

[@WorkPlayDrive]

They released the version for challengers and chargers a few weeks ago 👍

[@Hunterontherun817]

Is it possible to fully disable the lock?? I bought one n didn’t know abt the lock n went to drive n it locked my trans from going into gear. Fixed it haven’t used since, tryna figure out is possible to keep it fully off ??? Helllpppp!!😂

[@WorkPlayDrive]

In the video I show how to remove the pin at 9:13

[@noahkumm5111]

Are there ways to suggest additions to the Tazer?

[@WorkPlayDrive]

Head over to their Facebook group they’re always watching 👀

[@jcasey460]

Hi...not exactly on topic but I remember that you had a video where you mentioned the name of the cloth tape used on wiring. I'll never be able to find the vid...if you get the time can you tell me what the tape is called. Thanks

[@WorkPlayDrive]

It goes by a few names but “Tesa tape” is how I find it amzn.to/3OZ35Av

[@jcasey460]

@@WorkPlayDrive Thank you.

[@JuiceEasy]

Someone on another video made a comment that when the start stop system engages, you have to re-enter the code every time - is this true? They mentioned to avoid this they have to disengage the start stop every time…. If this is true this isn’t feasible for 4XE owners because the car start/stops regularly.

[@WorkPlayDrive]

They are aware of the start stop bug and are working on a solution For now as a work around You can disable the start stop function with a taser, and it will remember it each time you start the vehicle.

[@thatgreen5og360]

Will this work on a sierra they are stealing them in my home town they are all over them including silverados?

[@WorkPlayDrive]

The Tazer only works with Ram, Jeep and Dodge vehicles.

[@theblastermaster5590]

I use remote start a lot so I wouldn't want the horn blasting if I didn't get there fast enough. I really like this product but please do not suggest that change.

[@WorkPlayDrive]

This feature doesn’t activate until you physically press the start button, so it’s not going to impact your remote start. Also, if you don’t enter the code fast enough, it’s not going to start making a scene until you put the vehicle in Drive. So no stress if you’re dealing with the kids or music etc and can’t enter the code quickly once starting. They only thing that happens is the brakes lock until the code is entered.

[@bigvilly27]

Is it simple process to clear the PIN when taking the vehicle for service?

[@WorkPlayDrive]

Yes check this video 9 minutes 13 seconds.

[@SinCityBill]

Dies the tazer always have to be plugged in after programming what u need?

[@WorkPlayDrive]

For some features you can program and remove. For the love items, the Tazer needs to be plugged in for all the features in the “live menu” to function. Review the online manual for more details

[@esco0310]

I'd like to know more bro because in phoenix, AZ they stealing all Mopar cars like crazy! How do I get this product and where do I find it at??? Please let me know

[@WorkPlayDrive]

I got links to everything in the description of this video. 👍

[@medicchester]

Horn honk would be 100% better, do they offer this for the RAM 2021 power wagon 2500?

[@WorkPlayDrive]

The horn has already been added to the latest release and they also added the ability to disable the accelerator, which stays disabled even if someone locates and removes the Tazer. Check out their website for the features available for the 2500 💪

[@Cha0sXXII]

Do you have to leave the Tazer hooked up to the car in order to utilize these new features? I have an OLD Tazer, (circa 2017) and I set the track options and screens and such that I liked, then I set the car to it and took it out to leave at home. The car still maintains the features I enabled with the Tazer though, will it work that way now or does it need to be hooked to the OBD2 to work (like with the line lock feature)? I HATE leaving anything hooked up, especially to the obvious OBD2 port, maybe Z automotive can work on that if that is the case?

[@WorkPlayDrive]

The Tazer needs to be connected for these live features to work. If you’re worried about having it in the OBD port check out their double bypass. kzbin.info/www/bejne/Z5SohH-FeNCamLs

[@Cha0sXXII]

@@WorkPlayDrive you're the only person who ever helps with this thing so I appreciate it. I got the bypass and attempted to download the ZPU onto my pc (this pc never had it before) and I can NOT get it to even run or open, so I can't update my Tazer to use the bypass I just bought. I keep getting a pop up saying "an ap on your pc needs the following windows feature" then it lists nothing and won't highlight the option to "install feature" as none it there .. how am I supposed to make this work. I absolutely HATE these new updated programs, the old ZPU worked on my old pc just fine.. why won't this one work on my new one?

[@WorkPlayDrive]

Do you have access to a other computer? Perhaps there is something wrong or outdated on your PC?

[@Cha0sXXII]

@@WorkPlayDrive I was able to get in contact with z automotive, thankfully I was able to update on another pc. Unfortunately this will forever be a problem going forward unless they make a fix on their end, apparently you must have an activated windows account, which is complete BS with today's windows OS and their TRASH subscription accounts

[@thechef9218]

Does this connect the same way in a 2022 Hellcat? Or do I need to use the double bypass?

[@WorkPlayDrive]

What vehicle? If it’s a challenger or charger the double bypass is needed. For the ram it just plugs in as shown in the video. No additional items needed

[@thechef9218]

@@WorkPlayDrive its a Challenger

[@maldo72]

Checking in buddy where have you been ... I don't see anymore posts from you

[@WorkPlayDrive]

All good man, enjoying my stock trans am, working and spending a lot of time with the family. Not much to modify at the moment.

[@larryfreeny315]

And I can’t use this for my 2010 charger ?

[@nicholaspoole8688]

I have the product but don’t see how to install the pin option? It’s just not there

[@WorkPlayDrive]

If you have an older Tazer you just need to upgrade the firmware to the latest version to add the PIN feature.

[@menswearhous]

Do you use STA-BIL in your hellcat?

[@WorkPlayDrive]

No additives. I run the car a few times a month.