zAutomotive TaZer or Burnbox - Double Bypass Install

Put that TaZer in the Trunk with the Double Bypass. Requirement for 2018 Chrysler, Jeep, Dodge Ram vehicles. Convenience feature for 2017 and under.
Affiliate Links
Double Bypass - www.zautomotive.com/product-c...
Tazer - www.zautomotive.com/?ref=work...
2018 Dodge/Chrysler/Jeep vehicles all have a new security module that renders the OBD2 port inoperable for all aftermarket devices and tuners. The Double Bypass kit overcomes this obstacle by installing a secondary OBD2 port in the trunk, bypassing the security module.
The Double Bypass will also work on 2011-2017 Chargers and 2015-2017 Challengers, for those that want to relocate their Z Automotive devices to the trunk, freeing up the factory OBD2 port for their Diablo Sport / SCT / HP Tuners device.
▽ Install Manual
www.zautomotive.com/instructi...
▽ ▽ WorkPlayDrive Apparel ▽ ▽
teespring.com/stores/workplay...
100% of the profit goes direct from Teespring over to St. Jude Children's Research Hospital.
----- Stuff you saw in this video -----
▽ Red Edge Seat belts from
www.seatbeltplanet.com
▽ Buy the Double Bypass (affiliate link)
zautomotive.com/product/doubl...
▽ Buy the TaZer (affiliate link)
zautomotive.com/product/tazer...
▽ WorkPlayDrive Approved product Discount Page
www.workplaydrive.com/product-...
▽ Luxe Auto Concepts (affiliate link)
I'm a Luxe affiliate your purchases save you money and help my channel
Get your tint kits here bit.ly/2lYCvux
5% Discount code WPD2022
▽ Get your WorkPlayDrive reflective decals here ▽
bit.ly/2oPbKqE
(Luxe affiliate Link)
▽▽▽ WorkPlayDrive APPROVED Products ▽▽▽
Luxe Auto Concepts
I'm a Luxe affiliate your purchases save you money 15% as of right now and help my channel a little.
Get your tint kits here bit.ly/2lYCvux
15% Discount code workplaydrive
Storm Trooper Decals bit.ly/2o8XMTm
▽ HemiFam
www.hemifam.com/
Affiliate Discount Code “workplaydrive” 10% off
▽ Grdian Defendr+ DashCam
WorkPlay Drive approved, review coming soon
Affiliate Discount Code “workplaydrive” $5.00 off
www.grdian.com
▽ G2 Caliper Paint
The Orange Kit I used
amzn.to/2gmaVBX (amazon associate Link)
The Black Kit I used
amzn.to/2gg78F3 (amazon associate Link)
For more G2 Info head over to my site, I'll keep any current discounts and info here.
www.workplaydrive.com/G2/
Enjoy...
~*~*~*~*~*~ Folow us ~*~*~*~*~*~
www.workplaydrive.com
/ workplaydrive
/ workplaydrive392
/ workplaydrive

[@RTLife]

Man they're finding ways to make modding our cars a little harder & harder every year. Seems like a simple enough procedure though. I have the worst "install" type videos online haaha - Nicely done.

[@WorkPlayDrive]

Thanks man, I just started watching your channel recently thanks to Growls Garage I haven't seen your installs yet but now that you said that I need to search one out ;)

[@Punishment718]

lol, don't see yourself short R/T Life. You are unofficially my research and development department. lol

[@moparchallenger749]

BLUE HULK Mine too 👍

[@daytonatom7556]

Just watched, very detailed. Just installed in my Charger. Now it's time to play

[@WorkPlayDrive]

Oh yeah! Have fun!

[@wellingtonharrison2005]

Best Challenger videos on KZbin! Clean and to the point. Keep them coming! Happy to hear that this doesn't void the warranty. There's always something......

[@maldo72]

Nice to see you back ...... wow awesome kit ...

[@dave-911]

Thank you for this video! I purchased the Taser for my Charger and followed you on my phone as I went through the install, step by step. Couldn’t have done it without you!

[@WorkPlayDrive]

Thank you

[@lovethesmellofracefuelinth7374]

They've got great products, and have the burnbox on my Challenger SRT8. If you like doing alotta burnouts, it's a must and is one of the greatest innovations made in a long time. They make it so that you don't have to tap into the hydraulics anymore, and save the brakes from burning up as well. So there's a lot of pluses about them, and should be on every modern muscle car

[@09pweezy]

You did an exceptional job explaining this. I've seen videos where people had no damn clue wtf they were talking about and took longer to explain. Thanks for sharing this video. You're awesome.

[@WorkPlayDrive]

Thank you 🙏

[@RLesser11]

Very informative, and I like how you walked us through step-by-step. You made it very simple, Z automotive should put this your video on their website. Excellent video, great channel

[@WorkPlayDrive]

I appreciate that, Thank you. zAutomotive used to have this one up on their video tutorial site but it appears broken at the moment. ;)

[@Cinn510]

Thank you so much! I just ordered and received mine today, and I’m going to install it myself. This video helped me so much and gave me the confidence to do it.

[@WorkPlayDrive]

Awesome glad to help

[@TheDustin3211]

Great video, bought my 18 challenger last October, was weary of putting anything in it like this. Appreciate the video.

[@WorkPlayDrive]

Congrats, it took me a while before I modded the car, once I started though, it's hard to stop. My wife thinks I have a problem :)

[@DogInVarrock]

Beautifuly done, thank you. Installing one on my daytona392

[@BLACKHEAT1028]

Even if I am not doing the mod in the title I always watch because your vids are easy to follow and straight to the point. Very educational and after watching then I say hmmmmm maybe I will do this mod always inspired. Don’t forget to think about sub meet and great

[@jcasey460]

Thanks this vid gave me just enough info (pic of the plug to see the clip and which way it has to move) to determine how to removed the plugs at the STAR connector.

[@EliMTL]

I subscribed- I like how you don't speed through your tutorials and take the time to explain. Very good video in my opinion. Keep up the great work!

[@WorkPlayDrive]

Thank you 🙏

[@Punishment718]

Thanks for the vid. My Trinity t2 just came so I will relocate the Tazer to the trunk.

[@WorkPlayDrive]

Much better than having a splitter 👌

[@jamesht85]

Seems like you would have way more subs. You always post excellent detailed videos. And I'm never confused about what the video is going to be about. Keep up the great work bc it is seriously appreciated.

[@WorkPlayDrive]

Thank you, I try my best man :)

[@williamwelch6532]

Always love your videos and attention to details.

[@WorkPlayDrive]

thank you!

[@bighomie95873]

Thank you! Install went great!

[@chrisfisher3622]

Great video. Just subscribed. Very well done. 👍👍

[@WorkPlayDrive]

Thank you!

[@devonbailey5746]

Great video good camera angles you just got my subscription thanks !!

[@WorkPlayDrive]

Thank you 😊

[@arleenrobertson7050]

Excellent video! I'll be installing mine tonight after work. The neighbors will get used to the burnouts eventually. LOL I will likely need tires and bail money soon.

[@WorkPlayDrive]

🤣🤣👮‍♂️

[@vincentntammy]

Awesome video ! Best instruction for this I've seen yet.

[@WorkPlayDrive]

Thank you!

[@10kiloburrito---8]

Thanks man your video was useful! I panicked a little when I got my taser for my 2018 ! Thanks !!!

[@WorkPlayDrive]

Awesome, glad to help!

[@gman4hire]

New sub here thanks to Growl's garage. Very good install video. Thank you.

[@WorkPlayDrive]

Thank you and Growls is the man!

[@James-Orr]

This is going to be a nice addition to the Tazer. I have knocked mine off smacking the clutch. Thanks for the video!!

[@bonjimmi9544]

Like always... another great install video....

[@WorkPlayDrive]

Thank you!

[@ed_rt]

Wow, always with the coolest gadgets, great video bro 😉😁

[@WorkPlayDrive]

Thank you

[@TheBlackScatPack]

Look at FCA, when we decide to have a little fun with the cars they want to try and take it away. I like this idea a lot and I will eventually do it. I like the out of sight out of mind thought of it being in the trunk

[@aibr]

It was done not only to prevent DIY: www.wired.com/2015/07/hackers-remotely-kill-jeep-highway/

[@cd2ogz1]

Excellent tutorial dude!

[@WorkPlayDrive]

Thank you!

[@baldbeast37]

Thanks so much!

[@travist9581]

Man this has got to be one of the cleanest tutorials on this Tazer! I just brought a 2018 Charger V6 sxt plus & debating whether or not this is a good buy? I hear it adds the accessories I already have like (easy exit, paddle switches, driving mode). I'm looking to get more power than it currently has & I was told this or the pedal commander would be a good 1st start? In ur opinion which would u recommend?

[@billyquinn2162]

Informative and detailed as always. Just got mine using your code. Thanks again!

[@WorkPlayDrive]

Awesome thank you!

[@billyquinn2162]

By the way, where did you get that awesome hood prop? I want one!

[@WorkPlayDrive]

I had it made at RR Metal Works LLC - CNC Plasma Cutting & Metal Fabrication. Great guy!

[@ivanp2490]

Great video. Very informative. Do the srt pages improve the driving experience? For example, more aggressive shifts? I don't care too much about light shows.

[@WorkPlayDrive]

Yes for the scat pack the SRT pages and track mode on the automatic make for more aggressive throttle and shifts

[@mlunden11]

Thanks im not good with electronics but this made it look simple i know its not but will try it. Thanks again john

[@WorkPlayDrive]

It's pretty easy to be honest it's plug and go, the hardest part it loosening the 10MM bold for the ground :)

[@widebodysrthellcat4068]

Nice 👍🏻 video thanks for the info!

[@WorkPlayDrive]

Thank you 🙏

[@BigDon_707]

Appreciate this video! Super easy

[@WorkPlayDrive]

Glad to Help!

[@creeps12395]

I got installed no problem thanks to you thank you sir 🙏

[@WorkPlayDrive]

Glad to help 💪

[@bobbyd9583]

OBD2 not ODB2. On Board Diagnostic Port. Next you'll say clutch fan.... Otherwise, great work, keep it coming.

[@gregory.chalenko]

Thank you for this tutorial! It actually helped me with installation better than the official manual. On a side note, during the procedure I was hating Dodge engineering even more than while replacing the light bulbs. The car looks so nice and refined on the outside, and inside everything is so hard accessible, cheap and flimsy! I still love my Charger, but I wish it was better thought through.

[@tonyclark5151]

Nice video

[@WorkPlayDrive]

Thank you!

[@MrM4rvelous]

Great vid thanks for this! I picked up a 2019 scat I'm just trying to catch up so my question is do you think that there's a used market for tasers where I could just buy one unlock the features I want and resell it?

[@WorkPlayDrive]

Nope the TaZer marries to a vehicle. If you make the changes and sell it the next person needs to pay an additional $50 to unlock the TaZer that’s married to your car. If you unmarry before selling it returns your car to stock. If you buy used you need to make sure the TaZer is unmarried.

[@WIDEBODYNATION]

Sounds like a some new features are coming to the taZer

[@WorkPlayDrive]

Check my latest video kzbin.info/www/bejne/n3PLoJyqn6h2jNk

[@panosfxable]

Hey man! Great video! I have 2018 Durango R/T you think i will be having problems when going to the dealership? meaning do i have to take it off everytime im going to the dealership? thanks!

[@WorkPlayDrive]

I would recommend unmarry and pull it out to avoid any shenanigans with the techs.

[@2010svtraptor]

Good video man👍

[@WorkPlayDrive]

Thank you!

[@michaelfallen1564]

Great video, wish I would have found it before I did my install lol. If you have a MOPAR and are on the fence about getting a TaZer, just do it. There aren't many other ~$300 upgrades that will give you as much functionality as this does.

[@WorkPlayDrive]

So true worth it for the line lock alone.

[@gamerforlife_3179]

Life saver subscribed

[@WorkPlayDrive]

Glad to help!

[@James-Orr]

I put mine in and attached it to the Harmon speaker. I used the code as well.

[@WorkPlayDrive]

I've got the Alpine so no Bump in my trunk :( How do you like the Harmon system?

[@James-Orr]

I know a lot of guys say its junk but I really like it a lot over the sound group 1 and 2. I'm not famialr with high end systems but this one is nice for me.

[@b8ascrub]

New sub here and new to the 2018 challenger. Quick question, with this bypass can I install a tune from Diablo without having to have the pcm unlocked?

[@WorkPlayDrive]

Nope this only bypasses the lock FCA out on the front ODBII port. Sadly you still need to unlock the PCM to get a tune.

[@doronjampolsky25]

Hey man! Have you heard of the Demon pages will eventually be available? The Hellcat Splash is awesome but the demon Splash would just be plain sick! Plus I obviously the SRT pages are a must-have for any Scat Pack owner. Thank you in advance.

[@WorkPlayDrive]

Not sure about the older models from what I know the TaZer only unlocks what is native in the car.

[@blwn231]

Awesome video man. Thanks for taking the time to do this.

[@WorkPlayDrive]

Thank you!

[@jaimefernandez3076]

Great video. I have a 2015 Charger RT. Can I still use the double bypass in the trunk to free up my OBDII port?

[@WorkPlayDrive]

Absolutely in fact, a lot of people use the double bypass so they can hide the tazer from the dealership and also use a tuner at the same time.

[@blackscatpackrt6737]

Nice install video for the bypass plug. I have an 18 and would need to do this to get a Tazer, haven't made the decision yet. New sub from R/T Life's video. Look forward to seeing some more of your content!

[@WorkPlayDrive]

Thank you, I just found R/T life myself, trying to catch up on his videos :0

[@Rocker1952]

Curious if there will be any long tube header or cam install videos for the SP in the foreseeable future?

[@WorkPlayDrive]

Planning is in progress for some major upgrades under the hood Spring/Summer of 2019. The parts list is growing, I can say headers are on the list along with stuffing a su.... ;)

[@LastHumansGarage]

sweet always wanted to know what this was

[@RonaldNPuello]

did you keep the blue wire with the red tazer wire in the trunk? or disconnected the blue?

[@egidiovelazquez6631]

Very good.Could you make a video How to unistall the tazer ?

[@stevee318]

I like this. I have big feet and I keep kicking the Tazer when I apply the parking break. This will eliminate that issue. Thanks.

[@WorkPlayDrive]

Absolutely 💪

[@stevee318]

I think your tutorial was perfect. I received this yesterday and the install was exactly the same for my 16' Charger ScatPack. The only difference was the colors of the pins that get plugged into the box. Mine were blue and black. I looked at your video again to see what wires were plugged into the pins. The wires are the same colors but did not plug into the same sides of the box that yours did. But the pins will only plug into the correct socket anyway. But the Tazer works perfectly and now I do not have to worry about kicking the Tazer out of the OBD 2 port when I set the parking break.

[@user-vz7pq5ck6r]

Good man

[@challengerman6076]

Did you have any issues installing this? Seems I need to do this to replace my PCM and get a tuner. I’m really worried about installing this. Any feedback would be greatly appreciated!

[@WorkPlayDrive]

None at all, the install is super simple.

[@davefortexas3245]

Gonna pull the trigger on the '20 Challenger sp wb... would this mod void any sort of warranty? Is it best to wait until such warranties expire before doing these sort of mods? Thanks for a very informative video. I'm an aircraft mechanic by trade and somewhat of a perfectionist myself, so I appreciate your attention to detail.😎👍🏻

[@WorkPlayDrive]

Thank you, I never had issues, but I also never took the car to the dealer during the 4 years I owned it. I got lucky and had no major issues and the ones I did have I fixed my self for content. ;) If I did to avoid any individual dealership issues I would remove when getting the car serviced. Regarding the warranty here is info from their site. Q: Will this void my warranty? A: Per the Magnusson-Moss Warranty Act (1975), a manufacturer can only deny a warranty claim when an aftermarket component is used if they can prove that the component caused the failure. Simply write down the settings that you used the Tazer to change, and change them back to their original values before service - it’ll be as if it was never used. As for “live” features such as light shows, line lock, full ESP disable, nav in motion, force video - use of those features can’t be detected.

[@davefortexas3245]

@@WorkPlayDrive ... Good to know... thanks again.👍🏻

[@TowerTruck14]

Mike stupid question , should I plug the tazer in under the dash and marry it before installing the double by pass in trunk ? Or can I just first time marry it from the double by pass ?

[@WorkPlayDrive]

You can marry from either location both are on the same bus 👍

[@matthewmaldonado5584]

@Work Play Drive So, in case someone hasn’t answered or asked this, if my dealer is the one doing oil changes and routine maintenance on this would this be a good idea to keep this plugged in. I know you can just “unmarry” up front but i would hate to have a voided warranty. Thanks and I would greatly appreciate your feedback

[@WorkPlayDrive]

Depends on the dealership. If you don't feel comfortable you can un-marry before each visit removed any traces of the tazer being installed. Again for them to void your warranty on a specific area they would need to prove the TaZer was the cause of that specific item breaking. Look up the "Magnuson Moss Warranty act"

[@dadathome274]

My OCD would have turned the negative connecter by the battery to face downward. Would you uninstall all of this if you had to take your car to the dealer for service or warranty work ?

[@jwoodard1369]

In my 2019 scatpack challenger can the taxer add navigation my car has everything else except the light show which is cool but I don’t need it currently uses nav through apple CarPlay an flashes to the radio

[@Aresfire2]

I have T/A "392". I'm thinking of getting a Diablo with a i tuner and purchasing a Jay Greene with a Fastman TB. Would this enhance the Jay Greene or would add an extra un-needed factor?

[@WorkPlayDrive]

The Tazer does not tune the car, it simply unlocks or changes settings that already exist in the car. check out all the features the TaZer will provide zautomotive.com/zpu/instructions/tazer_user_guide_2.4.3.pdf

[@deanrackley4917]

Any Idea if this will cause a problem with smog inspections? Wish I had watched your video prior to ordering, could have saved 5% :-) Great video. New subscriber here. 2018 Challenger SCAT.

[@WorkPlayDrive]

Thank you for the sub, there is no way it can affect your inspection. All factory parts are still in place.

[@deanrackley4917]

Work Play Drive thanks for the quick reply

[@BBHemisnJets]

Awesome vid.. TaZer in...! Easy Peasy just like the video says. Thumbs ↑

[@NOLJ]

Is it the same process for 2012 dodge charger?

[@red121984]

Do you still have to go thru the steering wheel buttons to unlock everything thing like the old way

[@WorkPlayDrive]

Yes the tazer still performs the same.

[@hl8818]

Do you know if it is the same setup for 18 durango srt. The battery is under the front passenger seat.

[@robfrmny21]

Make sure the hot side of the fuse tap is on the correct side, Ive seen vehicle fires happen using those incorrect

[@Erskin_S]

robfrmny21 what do you mean by the hot side ..

[@jerumbbadgers302]

Nice video, did mine but whenever I start my car radio kept on shutting down...What should I do...?

[@jasonfisher84]

Did this to my 18 charger few weeks ago. So what I am wondering is when Diablo sport comes out with the unlocked pcm and tuner for the 2018 models will I have to still use the trunk location or will the unlocked pcm give me access to the default OBD-ll port.

[@WorkPlayDrive]

Still haven't wrapped my head around the infotainment security, I guess you'll find out soon ;)

[@challengerman6076]

I have the same exact question.

[@kardarrgo]

zautomotive includes the double bypass with TaZer now for 299 for 2018

[@WorkPlayDrive]

Awesome 👍

[@tolane76]

I know this video is a few years old. But can you unlock a front camera option in Uconnect for 2021 Charger?

[@vedette26]

Hi, I have the tazer on my 2015 Scat Pack Shaker and I love it, now I can ride with my yellow light and small fog light. I changed my scat pack for a 2019 scat pack widwbody and I do not see the use of tazer .... I do not show light and I'm no fog light ...

[@WorkPlayDrive]

Sorry for the 2019s you need to contact Zautomotive support I have no experience with the 2019s

[@ms3ben]

Lucky me with my 2018 This doesn’t look hard a bit of a pita compared to the old way. Will this process need to be undone every time before dealer visits?

[@WorkPlayDrive]

I would say the dealer won't notice the double bypass if you move it away from the battery. I would still unplug the TaZer and reset to stock before visiting the dealer.

[@ms3ben]

I’ll probably just remove it all together before any serious visit. I doubt they’ll be messing with the battery area for an oil change visit.

[@pepe3360]

Hi can you tell me what is for that green conector (white+blue cable)? Thank you so much 🙏🏻

[@WorkPlayDrive]

Would you mind sharing the time in the video where the cable appears?

[@darkphantom120]

Fully prepared to get flak for this question, but I want to make sure I get this right the first time without complications down the road... Easy enough question: Do I need to disconnect the battery before installation?

[@WorkPlayDrive]

For safety yes it only takes about 20 seconds to pull the negative battery terminal ;)

[@darkphantom120]

@@WorkPlayDrive Thanks for that speedy reply :)

[@TheShawn3636]

Do you keep your tazer plugged in all the time in trunk been hearing people have trouble with battery drainage using the tazer

[@WorkPlayDrive]

Yes I do, even while away 2 weeks a month I have no issues with my battery. There was an issue with an older firmware, if you are on the latest you should not have an issue.

[@TheShawn3636]

Work Play Drive thanks

[@RTBOY954x]

Do you get performance pages in a 18 rt charger has the 8.4 and non track pack

[@drgoutbreak7934]

Do you have to leave the tazer plugged in or can you take it out

[@WorkPlayDrive]

The TaZer has 2 feature sets on where it makes changes to settings in your car, then it can be removed and the other "Live" settings that require the TaZer to be plugged in. You can find a detailed list of features in their FAQ

[@Trapjesus100K]

What about for 7” Uconnect does the srt feature work on it

[@superuser87]

Very nice man u do it so smooth. But the discount code not working 😕

[@WorkPlayDrive]

I've got another code that I believe is still working for a few more days wpdbeta244 was supposed to expire April 25th but I was told it's still active.

[@superuser87]

@@WorkPlayDrive thanks man! Yes the code is work and i ordered my tazer yesterday. Keep it up 👍

[@robdanner7604]

Do you ha e to remove the device if getting serviced at the dealership?

[@WorkPlayDrive]

I would recommend un-marry and remove just to avoid conflict

[@christopherjanssen8332]

Just got a 2019 R/T (Challenger)… I was pretty confident that R/T come with performance pages and the ability to see fastest 1/4 mile along with highest top speed but all I can see in my instrument cluster is my fastest 0-60 time, and nothing at all on my touch screen. I've driven over 500 miles too... (initially thought I'd have to 'unlock' these features). Do I need the Tazer or was my car supposed to have all this?

[@WorkPlayDrive]

If you have the 8.4 uConnect and super track pack you will have the performance pages. This was on 2015-2018 pretty sure 2019 as well.

[@christopherjanssen8332]

@@WorkPlayDrive I just have the 7.0 uconnect. That being said on Dodge's website if you go to build a 2019 RT before adding a single package it shows that it comes standard with the 'super track pack' when you click 'view summary'.... but I do not have a Super Track Pack button or menu on my uConnect so either their website is wrong or my car somehow is missing things it should have :( I'm guessing I'll now need to get a Tazer huh.

[@WorkPlayDrive]

Just check with the zAutomotive guys for the 2019 features. Not sure if they posted it yet.

[@stefanlubich2789]

Are we sure it will not be in computers still I got a warranty of 4 years unlimited miles warranty so I want to know will I lose it then or not ?

[@michaelford6590]

I have a 2018 RT but with a G2 burnbox can I use it on my 2020 scat pack?

[@jamesorr2855]

Have you had any issues with dead battery? I left Tazer mounted in the trunk and battery was dead after one day. I might move fuse to switchable fuse for charge port in console.

[@WorkPlayDrive]

James Orr No I’ve left my car for a few weeks while I’m away tazer plugged in with no issues. Make sure you have the latest firmware installed. There was a bug in the original release that caused it to stay on.

[@jamesorr2855]

Work Play Drive mine stayed plugged in all the time with original obd port. Battery dies after moving to trunk is weird. I'll recharge and see if I did something weird lol. I'm also Puss n Boost but from my phone it changes user name??

[@biryaniboy]

Does this bypass also power other obd2 devices? Or only the tazer

[@WorkPlayDrive]

It will power other OBD2 devices. It’s like a 2nd port without the need for a splitter.

[@brewaire]

Finally purchased my double bypass, great video, very helpful. For some reason the discount code did not work. Tried emailing them, so far no response.

[@WorkPlayDrive]

Glad to help, sadly my code expired, but I'll have a new one in a few weeks.

[@brewaire]

@@WorkPlayDrive thanks for the response and all your helpful videos.

[@j.rodfit914]

I removed the double bypass from my Challenger because I need to take it to the dealer for servicing and I accidentally broke the white connector and it’s stuck in the bus. I tried to use a vice grip to pull it out and I messed it up pretty bad. How can I get the connector out without causing any damage to the bus?

[@markmccormick5361]

Is the install the same for a 2018 charger?

[@WorkPlayDrive]

Yes sire the install should be the same

[@mr_zurkie]

I noticed you have quite of bit of junk in your trunk... But can I still stick my bike in it?

[@WorkPlayDrive]

😂😂

[@tomhofferber5529]

Do you have a video for a 2019 Ram 3500 using the TAZER Ram??

[@WorkPlayDrive]

Nope sorry only the challenger.

[@steveshilt5438]

I have a '13 RT Challenger so don't have to do this but I am thinking about a newer one. Does this make it so you don't have to buy an unlocked pcm?

[@WorkPlayDrive]

No the PCM is not touched, you would still need to have it unlocked for a tuner. For pre 2018 this is a great way to add a second OBDII port

[@jg435]

You don’t have to turn on the car and do the menu thing?

[@Mopar_Roc]

Really strange - I’m trying to install my double bypass now and instead of those nice simple green and white color coded connectors, mine are black and blue. Am I missing something here? Lol

[@gregory.chalenko]

You got ones exactly as per the official installation manual: zautomotive.com/zpu/instructions/DoubleBypassInstall.pdf Mine were like in this video. In any case, you can reference the wire colors

[@_392_Scatty_]

Do I have to update it when I get it on the computer or would it be ready to go

[@WorkPlayDrive]

When I received mine it had the latest version. But that was a few years ago not sure what they are shipping with now

[@dump3deg6]

Where did you get that sunroof sticker?

[@WorkPlayDrive]

I ordered mine from Luxe Auto Concepts bit.ly/3b8CUDA