Stop Wasting Money On Resin River Tables!

Check out www.glasscastresin.com/less-r... for full project details
Further info and product links ▼
If you're making a solid colour or metallic effect resin river table, save a huge amount resin, money and resources by using this incredible plywood core construction method for your next river table project. Following this process will allow you to produce an identical looking river table, of the highest quality, using only 1/3 of the amount of resin as a conventional river table.
Direct links to the products used in the project:
► GlassCast 50 Resin www.glasscastresin.com/glassc...
► Black Epoxy Pigment www.glasscastresin.com/jet-bl...
► RW4 Spray Wax www.glasscastresin.com/spray-...
► Mirka Abrasive Discs www.glasscastresin.com/abrasi...
► NW1 Polishing Compound www.glasscastresin.com/nw1-ep...
00:56 Preparing the Wood Planks
01:54 Making & Preparing the Enclosure
02:58 Making the Plywood Core
06:08 Pigmenting the Resin
07:23 Base Pour
08:26 Bonding Down the Plywood Core
09:17 Final Pour
10:20 Machining the Table Surface
12:04 Flatting and Polishing Epoxy Surface
If you have any questions, please just ask in the comments below!

[@glasscastresin]

Thanks for all your comments, likes and subs - we really appreciate them! To clarify, this tutorial is aimed at DIY'ers and makers that have been put off attempting river table projects due to the cost of materials and not to cut costs in professional production without customers being aware of the core. Additionally the technique is only suitable for solid colour and metallic river tables. 🙂

[@glasscastresin]

It might have been that the resin layers weren't poured at the 'B' stage, if this was the case and you hadn't keyed the surface in preparation, the resin may not have had a very good bond. If the wood wasn't fully dry and continued to move then this may explain the separation.

[@simonrano8072]

Oh no Blacktailstudio would have make even more profits only selling overpiced wood slabs over and over again...

[@Chris_Harris]

What the ever loving frig (not the word I really said). People buy these tables and make these tables because they're a premium item that you can own that is a high quality thing that hopefully lasts your entire life. Mentioning plywood and one of these tables only means one thing. YOU are a hack. You're a low class scumbag for making people consider creating their tables with pieces of crap. I hope you catch hepatitus C for the (C)orruption of WOODWORKING (which is the point). If the author has the balls to keep this post alive, I hope you see this and realize that he's telling you things you shouldn't be doing. You're SUPPOSED to be making these tables out of the designs and top notch quality materials. Beside the fact they last longer because you make or buy a table that's been made properly, Have PRIDE in your work or ownership of something. Do you really want to look at your expensive table a couple months down the road and realize that you stuffed it full of junk? I would consider this point, very seriously. Well done, Glasscastresn. Way to make POS Ikea tables out of what should be top dollar show pieces!

[@orcishh]

As the other guy pointed out, it's incredibly noble showing off how to use less. You're absolutely correct about it helping people in a budget get into the craft, and I've never wanted to buy a company's product more if I'm being honest. I'm bookmarking the video for later this week, I'm hoping my stepdad wouldn't mind doing a project like this with me.

[@glasscastresin]

That was exactly the aim for this video to help people reduce cost.

[@spacepigfred2321]

U

[@cwg73160]

“it’s incredibly noble” Jfc How are people this naive? It’s called marketing. This vvideo came from the question: How can we get more people to buy our product?

[@orcishh]

@@cwg73160 I'm absolutely aware its marketing. However, they could alternatively show you how to make a cool table using the regular amount of resin, then advertise their product. I'm aware that they're selling me something but at least they're showing me how to be efficient with what I buy, and not spend double the money. Thanks.

[@kellyvcraig]

@@cwg73160, for years, I would share my finish formulas and techniques with customers, sometimes going into detail on how to avoid having to hire me. It got me a lot of repeat customers, because others, jealously, guarded their secrets, rather than educating their customers. In the end, only a rare few would apply what they learned from me to do it themselves, and I could only serve so many customers anyway, so the loss of a few sales didn't hurt me.

[@Sly_Wolf_1]

Excellent, a company showing you how to save money by using less of their product is very very noble, and in my opinion speaks volumes. Thanks for a well presented video. I plan on trying some epoxy projects and glass cast will be my first call.

[@glasscastresin]

The cost of resin can be quite off putting for a lot of people so this revised method may make resin river tables more accessible to people for whom a typical table with a lot of resin may be out of reach budget wise.

[@tubester4567]

Doesnt it weaken the strength of the table? Now you only have 5mm of resin (x2). If you want to use less resin just make your gap smaller.

[@Sly_Wolf_1]

@@tubester4567 Good point but personally I would suggest that it depends on the table frame/skirt which supports the table along four sides or across each end. Remember that the table is not "load bearing" unless you stand on it and nobody is going to try and bend it in the middle.

[@tubester4567]

@@Sly_Wolf_1 Maybe but Its common for people to sit on tables, or stand on them to reach high places. With the high cost of timber slabs I dont think I would risk it personally.

[@Sly_Wolf_1]

@@tubester4567 and with the correct frame/skirt under the table you will spread any load. But each to their own. I know I could build this and have someone sit or stand on it without issue.

[@benorchard78]

This is great if you're making an opaque resin. To me a massive part of the reason to use resin is for the transparency.

[@glasscastresin]

Hi Ben, indeed, this only works for opaque resin so there’s lots of situations where this can’t be used but where it can, we feel it makes a lot of sense.

[@benorchard78]

@@glasscastresin sure. I just vastly prefer the resin to remain transparent

[@minhdaubu2363]

@@benorchard78you can make the plywood look like a river bed and still use clear resin. Unless you wanna see the floor through your table

[@natemartinez4595]

@@minhdaubu2363 maybe he's got gorgeous floors that just need a slightly colored viewport 🤷‍♂️

[@juvat2440]

I reduced the amount of resin, by using small gardening rocks to imitate rocks/rapids in the "river". Used a similar technique as shown and I figured I reduced the resin required by half. This also allowed a more transparent resin pour.

[@DJ-Daz]

Another option for river tables, especially clear pours, use varying sizes of gravel to simulate stones/boulders in the finished product. You could also use sand under the gravel to reduce the volume further.

[@glasscastresin]

Yes encapsulations are a great way to reduce resin usage where they can be made into a feature.

[@Raraoolala]

@@glasscastresin Out of curiousity, applying the same method as seen in the video - do you think using an acrylic filler in replacement of plywood match the refractive index *enough* when poured with uncolored/transparent resin to go unseen? Of course cut edges of the acrylic would need to be polished.

[@glasscastresin]

@@Raraoolala You would really need to test this out to see how well your acrylic was matched to the resin once cured. The edges of the acrylic where it stops short of the wood may pose the biggest visual problem.

[@heygek2769]

@@Raraoolala Even if you'd get it "close enough", you'd still see it from certain angles or light conditions, really you're just asking for trouble. With the plywood core in the video it's very likely there were still some tiny air pockets trapped between, but it doesn't matter because you can't see them. With clear epoxy and acrylic you simply don't have the luxury of hiding tiny imperfections.

[@theduftmeister]

Helpful hint. If you can, put part B in the cup first and add Part A. I've found that as part B is thinner, it doesnt stick to the sides of the mixing pot as easily as part A. Less likely to leave unmixed resin on the sides of your mixing bowl. used about 20 litres from Glasscast now. Great product and great customer service/tech support.

[@moobaz8675]

Brilliant. Great to see a company showing you how to save money using their product. It builds credibility and consumer confidence. I'll be using them for my next project. 👍

[@oakridgereview1359]

I think i appreciate this so much more because it’s a resin company telling you “hey, you might not actually need to buy as much product!”

[@glasscastresin]

That was the exact intention, we doe hear that some people are put off large projects like this by the cost of resin, unfortunately it is an expensive product. Hopefully this method makes it more accessible to those who still want to create their own river table.

[@Ni5ei]

The fact you're using metric is enough to leave a thumbs up!

[@NWGR]

Amazing! Most definitely adding this to the bag of tricks. 🙂 Thanks for posting this. Clear, concise and very informative.

[@blockmeisterd2893]

Great idea. So refreshing to have your calculations in metric.

[@SICresinwrks]

Ive done this on smaller projects, its definitely a resin saver for sure!

[@EpoxyWood]

I have been using glasscast 10/50 many times and it has never disappointed me. Brilliant stuff 🥇

[@glasscastresin]

Thank you, that’s great to hear 😀

[@aaroncohen6095]

I'll be starting a table build later this year and I will absolutely be using this method. Should save me hundreds of dollars. Thanks.

[@Perspari]

Yep, I've avoided this due to the immense cost and volume most people encourage. Legit keen to do this since you've shown how to make it economical and environmentally friendly. Strong integrity, very impressed!

[@thomaspaul311]

Very informative and entertaining. Quite excellent at showing how it is done without making it seem as if it should be simple.

[@cosmingosav]

Finally someone who uses the metric system... makes this so much more easy to follow

[@katingaman]

much appreciated for the time you have put in to show the process of doing the table, amazing job

[@WavyWoodwork]

Great video. Super informative. Love that you also covered the mistake with the router 👏

[@glasscastresin]

Glad you found it useful. We know how easy it is to make mistakes and always try to be open with our content, it also means we can show how to fix the problem.

[@Edu_RJR]

I really cant fathom why people wouldn't do this with opaque pigments, but semi transparent river tables are my favourites

[@Starie78]

Clear and concise, a pleasure to watch.

[@juna61]

Now this is marketing that is made for the real audience, with noble gesture of showing how it is done with less budget.

[@doesntmatter3068]

As a retired toolmaker/machinist with MANY years under my belt. I have helped manufacture many molds over the years. This is very common what you have done here. For these of you whom don't understand molds, This is how a mold makes a plastic cup, for a simple example. Metal is engineered to make the inside part of the cup, which is turn will make the wall thickness of the cup. Or when manufacturing an engine block, a core made a sand to make the holes for all the cylinders. The molten metal will flow around the sand/core to produce a hole where it is needed. Good way to save $ on materials and machining time. You actually explained this very nicely! 👍

[@Swarm509]

Great video. I've known a lot of people who wanted to try out a resin project, including myself, that get put off by the cost of it once they work out what they may need. Even saving a little bit helps.

[@glasscastresin]

Exactly what we aimed to do with this video.

[@cathymack6961]

Fabulous video! Great idea using the wood insert !

[@DP-ol1wh]

immediately like this guy better than everybody else lol. seems more like a real person and not some hack! cheers from across the pond

[@suicidebylifestyle9267]

For solidly opaque colours, this is bloody clever,

[@kdubcreations]

I do this already. I use up my scrap lumber. Be sure to seal the filler boards to reduce bubbles.

[@glasscastresin]

Yes, totally agree on sealing the filler boards. Hopefully that came across clearly in this video.

[@kwc813]

Amen... my scrap pieces get used like this, and if not big enough I slice it into strips and laminate them all together. Quick run through the planer, seal , pour and honestly some of my favorite pieces!

[@tawelwchgaming8957]

If I ever get around to building one for myself (wont do it til i live in a house big enough for it), i'll use this technique and add a bit of flair to the river (make it look like a river with a sandy bottom and little additions in the middle). The plywood is a great idea to save on space, and if i have a bit of fun with the middle, it should look great, even with transparent resin

[@waqarahmed467]

I was amaze when i saw ur comapny showing ideas to save epoxy shows really you guys care about us

[@FromTheHeartWoodMK]

I did something similar to this on a lake table I was asked to build, the video is on my channel. The slab was over 5 cm thick and I had a limited budget to build the table on, so I just put a plywood platform in the center and sealed the edges, only casting about 1/5 cm worth of resin, turned out beautifully, so i can vouch for the fact that resin saving techniques work and they worm very well!

[@BerkleyBuilds]

A great video, really clear and informative and making me want to try it myself.

[@kevinbihari]

Man this is great quality. Like top quality filming, great editing. Great sound. Pleasant yet spicy. Professional yet educational. Long enough but to the point. This is a sience. Proficiat

[@glasscastresin]

Glad you enjoyed it. There is a lot of work that goes on behind the scenes, but we think it's worth it.

[@KenUngaro]

OUTSTANDING OUTSTANDING OUTSTANDING video!!! Thank you soooooo much for the concept and ideas!!

[@glasscastresin]

Thank you for your fantastic feedback! 🙂

[@xyztnce]

Great idea 💡 this idea is good for environment. Most of river tables are filled with black resin. For opaque ; can we replace cardboard with glass?

[@neilburman5522]

Excellent video thankyou. Please can you supply details of how you made your router sled and where you got the materials. Thank you again.

[@artlife6210]

great idea, reminds me of putting backing of cheaper line on a fishing reel!

[@mrpiratedancer4rrr]

You could even have the plywood core be a piece of art of it's own that is put in with transparent pigment. That could look really cool also: a disconnected table, or wooden fish, or a photo glued onto the plywood of stars or anything. There are lots of options that could look cool and cut down on the resin without being too complicated.

[@glasscastresin]

Indeed you could make a feature of it if you so wished.

[@nutrybe]

To add a little bit more to what you were saying...you could also glue a matching wood veneer to the top and sides of your plywood core or just the top and angle the sides a bit so they're not noticeable. Shape it like an added piece and save some epoxy that way while adding a cool little "island" part to the whole piece.

[@traceyhilder3426]

Fabulous job love all your products

[@RiminiVirage]

This was an excellent video and particularly informative. Thank you.

[@glasscastresin]

You're welcome 🙂

[@Not_Morgoth]

this idea makes me think of possibilities with a decorated core and transparent resin, there seems to be a more “intentionally designed” space this could go into that’s a little outside the mainstream with most of these wood/resin projects nowadays, I think the gaming table chaps have some good ideas to pull from into more simple, general purpose tables.

[@glasscastresin]

Sounds like a good idea, encapsulating visual items could make for a really interesting piece of furniture.

[@DEarls-ye9tz]

Pretty smart to conserve resin wherever possible by filling the volume with more economic materials. I never thought about that.

[@jamesfriesen9633]

Impressive workmanship!

[@edwardchester1]

Great video overall. One thing that did strike me is that while this is most obviously of use for opaque and metallic resins, it seems like you could do a transparent effect finish quite easily too. Maybe reduce the plywood thickness by another 5mm and use that depth to add and progressively more transparent layers to the top to create the illusion of a deeper pour (much like how people do those fishes swimming in water illusion paintings on resin).

[@glasscastresin]

Yes you could certainly do that and make it into an effect.

[@constantinosschinas4503]

The style of presentation resembles easy composites channel. And that is a compliment.

[@glasscastresin]

We're in effect the same company; we broke off the GlassCast brand to keep the two areas of the business separate from a tutorial and website perspective but the tutorials are filmed in the same studio with the same team :)

[@Zenkai76]

great idea for solid pours, I haven't done a table yet but I have practice with some charcuterie boards, this makes me want to try a table

[@glasscastresin]

Thanks, you know where we are if you decide to give it a go.

[@UseToPewProfessionally]

haven't even watched this but the idea of making a core is very interesting, especially if its not transparent.

[@frederickheim8706]

Just used this technique on a 40 liter pour. Saved me $300 in epoxy. Turned out awesome !! Thanks

[@glasscastresin]

Gad you found it useful and offered a good saving!

[@JessicaAVoigt]

This is a great idea! Congratulations on the project, this is definitely going to help a lot of newcomers to get into the resin world and not spending a lot of money/ product, including myself. Thank you for the idea, keep up the great work!

[@rjtumble]

Great idea! How much do you have to worry about dust in the shop when letting the resin set? I'd be doing this in my woodworking shop, so it can get pretty dusty (though I do have good air cleaners).

[@glasscastresin]

Ideally you want the dust to have settled and also not do dusty work while it is curing. You could even make a card box cover to keep dust off it. However in this specific case where the surface is being routed, sanded and then polished; any odd dust specs that fall on the surface, while the resin cures, would be removed during post processing.

[@ridhaandsouza1862]

I looked at the thumbnail and I was blown away like god damn dude u are really smart I never thought of that

[@BruceWayne-zg4gl]

Great video !! Really clear with steps. Thank you

[@glasscastresin]

Glad it was helpful! Thanks for the feedback.

[@tocov]

How the hell do you only have 12k subs? This is amazing content.

[@sunalwaysshinesonTVs]

Good idea. One other key way to save money when making river tables is not buying the release spray. I did some work making aerospace and autoracing carbon fibre parts and we used basic car wax.

[@christophervaniersel6168]

Hi there, great video! Love how you touched on many practical aspects a hobbyist will run into when making such a table. Often you see people using a heat gun or small torch to get rid of any bubbles. I didn't see you do this. Was this done off-camera, or does your resin somehow not have bubbles?

[@glasscastresin]

Hi Christopher, thanks for your comments. The GlassCast resin is very good at releasing entrapped air by itself so generally not needed. If there are any stubborn bubbles that are refusing to pop then yes you can use a heat gun or blow torch to help them on their way.

[@puretruth6379]

Excellent idea, I will try it. 👍

[@uttankjha8888]

Beautiful piece and great intent behind using less of your product to make it more accessible and affordable to your customers. The possibilities of using the filler material as an effect when using transparent resin is exciting.

[@sylenzos6869]

> sells resin > gives tips on how to use less resin he real asf for that one

[@marcfouqret]

Hey! im new to this, would the core effect the strength of the build at all?

[@glasscastresin]

Not really as the epoxy soaks into the surfaces giving you a strong bond on the interfaces. Its also worth noting that this also makes the table lighter; the plywood we used was a 600kg/m3 density, whereas the resin it displaces is over 1,000kg.m3 so there would a bit of a weight saving overall as well.

[@starhawke380]

I had never considered adding the dye to the resin before mixing the 2 parts. You can dye just the resin part, then store it for later, and only mix in the hardener as you need? I always thought you had to mix the parts, then add the dye. Always wondered how you do a partial pour, then add the core, then add more resin to top it off, while keeping the color the same for all the mixes.

[@wischmopps293]

It's awesome that we came back to use plastic in our furniture.

[@sadiyahsuliman8943]

Hi there! I saw this it's amazing - THANK YOU!! What about using Perspex for a clearer pour? will it bond and still be strong?

[@glasscastresin]

This technique is really only really suited to projects with a pigmented opaque resin that hides the filler material. If you were going for a semi translucent then it you may be able to get away with using clear filler material but its not something that we have tried.

[@joesmith1926]

What a great tutorial, and super to see you in the comments throwing ideas about with viewers. Great interaction 👍

[@glasscastresin]

Thanks Joe, we do like to hear back from our customers and followers. It helps us to understand what projects to work on next!

[@Demonskunk]

I'm not a potential customer, but I like watching this sort of thing.

[@ASelman]

Thankyou for this, very clear to see and follow. When letting the first resin pour tack off, how long / tacky can it be left? is there a guide for time v temperature? My concern is the development of amine blush and waxing that could affect the effectiveness of the second bond to the first. Thanks

[@glasscastresin]

Depends on volume of pour, how long mixing, ambient temperature etc so no easy exact time. You need to check it with a gloved finger to see when the exact point is reached. Properly mixed resin at a decent temperature is extremely unlikely to have amine blush or waxing issues.

[@GuilhermeSilva-rp2it]

Have you ever tried to mix thin sawdust to the resin? I always think I would do that if I used to make that kind of stuff.

[@noggin8216]

Now all we need is for blacktail studios to make a glowing core inside the resin

[@davidwinters8325]

Excellent video. Good work sir

[@michaelcooper8255]

Fair play for putting this out there. Considering you are essentially doing yourselves out of sales. Brilliant way to make extra money on commissions from a creator perspective.

[@glasscastresin]

The cost of resin can be quite off putting for a lot of people so this revised method may make resin river tables more accessible to people for whom a typical table with a lot of resin may be out of reach budget wise.

[@robertdrysdale4520]

Great video! I’m definitely considering using this technique when I build my own table however, I wonder if this would compromise the strength of the table at all?

[@glasscastresin]

Certainly no more so than with any river table in general. The wood has its own inherent strength and its all bonded together by the resin.

[@jimmyfavereau]

Outstanding! thanks so much!

[@snap-off5383]

I don't like often, but when I do, they're great videos like this one.

[@earld1403]

Something to try (whether or not you are using a Filler material) - Put a Mirror on top of the filler material and under Translucent Epoxy. For the best look, use a Front surface mirror. They are more expensive but they're worth it for a real River / Lake look.

[@glasscastresin]

Would certainly give a different look and maybe more depth.

[@adaptivediyers]

ive tried this once before, and the wood inside the pour "ghosted" through, so you could see the very slight divets when looking across the piece. That was some time ago though, so maybe casting resin is getting better about shrinkage? I have not tried this recently, and this would help out a ton on saving me money on resin!

[@glasscastresin]

Shrinkage on some types of resin can be significant. Epoxies in general, and especially the GlassCast range are exceptionally low shrinkage.

[@angryzombie8088]

Less weight & cheaper, very pragmatic, I like it!

[@jessip5954]

Fascinating! How do you clean up your tools and buckets when working with resin?

[@glasscastresin]

You can use a solvent like acetone before the resin has cured. Our buckets are made from PP so alternatively wait until the resin has cured and peel out the cured resin.

[@carterfridd7070]

nice, will start to do this.

[@glasscastresin]

Thanks, glad you like the suggestion.

[@Kosmoski99]

Thanks for the video, do you run courses in the UK?

[@glasscastresin]

We don't run any courses for GlassCast products I'm afraid. You can however access all of our free tutorials on the Videos & Guides section of the website.

[@deepakmarar8603]

Hello bro Thankyou for the video is there any temperature for the epoxy work i mean what should the room temperature

[@glasscastresin]

18-20°C is the recommended working temperature for this resin, you can find out more info on the product data sheet

[@redesignedbynina]

Hi! Excuse my lack of knowledge, but I'd like to know how well that smaller amount of epoxy holds the table together? And if it is more than fine for the table in the video, how about a table that is, let's say, 3 or 4 times bigger? Would it still work?

[@glasscastresin]

For a table this size it is fine. The epoxy bonds to the wood on both sides so the strength of the wood is the bigger factor on larger tables.

[@redesignedbynina]

@@glasscastresin thank you very much.

[@donproctor3445]

I build decks for a living and have an endless supply of PVC scrap (Trim Board). Can this be used for the molds?

[@glasscastresin]

PVC can be difficult to bond to so possibly wouldn't work out as you do need the surface porosity to ensure the piece is strong enough.

[@Mysyntheticeye]

Awesome video 😊

[@glasscastresin]

Glad you enjoyed it! :)

[@haroldh9798]

If you're willing to buy a little more resin, do you need to use the bevel cut? Is there a significant curing risk if I am doing 1/4 inch per pour?

[@glasscastresin]

No, the bevel just helps to fill out the volume as much as possible. With the GlassCast50 you can pour into wood at a thickness of 25mm so keep it below this and you should be fine.

[@theduftmeister]

Bevel also helps trapped air ecape a little easier.

[@theofarmmanager267]

The use of resin - for me, the amount of resin featured - is a very personal view. I wouldn’t want a table where the resin seemingly overwhelms the timber but, then, I’m a woodworker. The useful thing - the very green reason - to use resin is that it takes boards which would otherwise be scrapped or cut up with a lot of waste, and make them into objects that can be used. I’ve made many tables that have resin in them but the resin is just used to fill checks and faults in the slab. It’s a far cry from a 40% resin river table. However, there is no denying that river tables are sought after and, whilst I though the fashion would be short lived, it continues. In fact, buying a waney edge slab now costs more (per cubic metre) than processed square edged material. Such is the law of supply and demand plus the opportunistic timber seller. I think that all the tips that I have learned (the hard way) have been noted by Glass Cast. I do use a degassing chamber connected to a vacuum pump for smaller pours (quite often moulds for items such as clock numbers) but it’s impractical for large volumes. So, I do go for coating the edges of the timber the day before if it’s a deeper void but always go for very slow cure (for which you can buy an additive) and regularly a hair dryer passed over the surfaces to release bubbles. If you want to see someone make resin tables very well, and for a living, look up the Manor Wood channel.

[@NerdsNtheHood]

Do you have a video on how to perfect or make a clear see through epoxy river table ?

[@glasscastresin]

Our main river table tutorial uses a tinted blue resin. If you wanted a completely clear 'river' then you could skip adding the pigment. www.glasscastresin.com/river-table-tutorial

[@genesisfootball1542]

Wow 😮 great idea. Do you have any examples of finished tables? I’ll be using Glass Cast resin for sure now 👍 I was really put off the idea by making these pieces because of the price of the resin. This has definitely made me rethink!

[@glasscastresin]

Have a look on the Project Gallery on our glasscastresin.com website and you will see loads of examples of customer completed river tables.

[@watahyahknow]

if you use clear resin you could allso lay down a bottom in resin fill most of the space with fancy sand or pebbles than fill it to the top with more clear and finish it off , should save up to about 2/3ths of the resin used ans looks a little different than a solid colour

[@apsilonblue]

2:19 Filleting wax? I've never heard of it and a quick search seems to only turn up results in UK and EU, does it have other names? Does it dry hard or remain the shown consistency?

[@glasscastresin]

The consistency remains the same.

[@zygmuntkuzminski8312]

wondering if we can use instead plywood something cheap like cement with rebar or other material that will hardener later?

[@glasscastresin]

Cement and rebar would be very heavy and relatively brittle. The core needs to be hard and rigid when fitted in this process.

[@michaelwillson6847]

I think this is a great top for solid colours. I have 2 questions though can I ask what the tape is you wrapped the blocks in as I've looked into the usal stuff people recommend ie tyvek tuk or epodex tape and there all expensive. Other thing is I'd love to do this im starting out doing this but the resin is expensive any chance of sending a kit to a enthusiastic maker just starting trying make his name. And have u ever had any issues with danish oil I was always told not to use in resin work 👍🏴󠁧󠁢󠁳󠁣󠁴󠁿

[@glasscastresin]

The tape we use is our barrier/release tape www.glasscastresin.com/resin-barrier-release-tape. We wouldn't recommend using the oil before pouring the resin as it will effect the way that it bonds to a surface, it might also impact on the way the resin cures. Once the resin has hardened it should be fine.

[@Boog7625]

Could you do the same thing making a countertop? Will it holdup over time?

[@glasscastresin]

There's no reason why you couldn't use a tabletop like this as a countertop. You wouldn't want to cut directly onto the surface, as is pretty much the case with all worktops and you would have to be mindful not to place hot items on the resin area.

[@lachose00]

Me as a guy who never buy resin nor does river tables or wood work : I'm not waistin any more money on resin

[@Lewis1o69]

I think you have a great idea as shown.

[@trixter21992251]

how scratch-resistant is epoxy resin? I'm thinking of dinner plates and general wear and tear. Does it leave scratch marks easily? Do you have to polish it up every so often?

[@glasscastresin]

Naturally if you were to drag ceramics over the surface there is a risk that they would scratch the resin. We would always recommend using a place mat and a coaster which will also protect the resin against heat. If the surface does get scratched however you are correct, it can simply be sanded back and polished up in the very same process that was used to begin with.

[@kellyngo7549]

Do you ever have to worry about thermal expansion of the core you use?

[@user-ut1si8qx4y]

Can you still use this trick if your coloring with mica pigments and swirlings a pattern as the epoxy is almost setup???

[@glasscastresin]

Absolutely, just be sure to have enough of the mica powder in the top layer so that the filler material is hidden. The top layer is a thinner layer than normal so you might need to add more than you usually would to produce the solid colour that you need.

[@burgerbait]

Why am I being recommended resin infomercials lmao

[@AlphatecEngineering]

Wow, nice video, love it 💚💯🔥

[@JHGC80]

I made my table exactly the same way 🙂

[@taraderomanus1689]

How do you get the surface hard enough to withstand the bottom side from dishes or plates ... 2k boat paint ?

[@glasscastresin]

Once the resin has fully cured, it is generally pretty durable. There are not any harder top coats available. Like with most decorative finishes, care should be taken to minimise scratches from dragging items over the surface. If it does pick up scratches, it can be polished again.