Stop wasting spray foam and spray paint! Use it over and over! MCG video

Рет қаралды 2,163

My Cluttered Garage - Outdoors and DIY

Күн бұрын

Пікірлер: 41

@MyClutteredGarage 3 ай бұрын

Affiliate link: Brake parts cleaner - amzn.to/3ZSdZgV

@jaasx 3 ай бұрын

I do the same with spray paint. Spray foam - I've mostly just given up and buy disposable nozzles off amazon for 33 cents. worth it.

@autobodytrainingsolutions838 3 ай бұрын

Great tip Ed. I’m surprised I didn’t think of it myself.

@jamescumbo1928 3 ай бұрын

Ed it also is great for taking off stickers but it will damage painted surfaces. It will take the gummy residue off as well. OH next time you use permanent marker on metal don't worry just spray some on a paper towel and wipe the marker away with just one swipe.

@brutalbob3982 3 ай бұрын

On spray foam I hit it with the air compressor, then a little Brake Kleen. Easy and fast. Thanks for the tips Ed. Take care God Bless STAY SAFE

@georgecarter1725 3 ай бұрын

Thanks Ed!

@steveboston6889 3 ай бұрын

Also the best wasp killer ever! Cheap walmart brand works great

@TommyRosaTommyProductions 3 ай бұрын

Great idea E!

@benkanobe7500 2 ай бұрын

I don't know how you do it, but you pick just about everything in my life that needs advice and have a fix our suggestion. A couple noteworthy: The HF enclosure, the WM chipper. Now these dang foam cans! Thank you. From Fallbrook, CA

@MyClutteredGarage 2 ай бұрын

Haha! Well thanks much. I guess you and I are just average people with average problems. 🤣

@freecycling6687 3 ай бұрын

Great idea!

@bobpurs 3 ай бұрын

Good tip Ed, works good. I do the same and have had good luck.

@deepbludude4697 3 ай бұрын

Good tip! Here's another tip take a rubber tire valve stem cut the bottom not quite flush, pull the nozzle off, leave the shrader valve in it, place VS over those can's that have zero pressure yet half a can full of lube, brake cleaner etc. Pressurize can with your air compressor.

@MyClutteredGarage 3 ай бұрын

That's a good idea! I just tried to regenerate my wd40 today with an air nozzle.

@maintenancewithmike 3 ай бұрын

That is an awesome idea Ed. Nice one and thanks for sharing it. Cheers.

@MyClutteredGarage 3 ай бұрын

Thanks 👍

@GardenTractorBoy 3 ай бұрын

That is a great idea, thanks

@starwolf621 3 ай бұрын

Cool idea, thanks for sharing!

@otisbailey5455 3 ай бұрын

Ed, good tip, I tried brake clean on cured spray foam nozzles for grins and it desolved it enough to clean. Thanks

@badgerlandturf 3 ай бұрын

I can see WHY you buy the brake cleaner by the case!😂 Good tip, will have to try these.

@ronniehoward6601 3 ай бұрын

Great idea i am going to try it. Thanks for sharing.

@GrampiesWorkshop 3 ай бұрын

How's she goin'? This is a great tip Ed. Thanks for sharing. I'm going to try that!! Take 'er easy!!

@MyClutteredGarage 3 ай бұрын

Great! Have a good one, Mike!

@happytrailsfarm 3 ай бұрын

It’s acetone and works great. Great vid as always

@MyClutteredGarage 3 ай бұрын

Thank you!

@frankwrogg2515 3 ай бұрын

Great suggestion

@MyClutteredGarage 3 ай бұрын

Thanks!

@jimaronson2323 3 ай бұрын

First, I liked the comedy in the video. It makes the video both informative and entertaining. Second, I would think that spraying the brake cleaner down the stem would put the brake cleaner in the can of spray paint or spray foam. Seems to me that would impact the paint or foam.

@MyClutteredGarage 3 ай бұрын

Thank you! It would take a lot of pressure to inject brake cleaner into the spray can of the foam or the paint. This is basically just rinsing it off so the paint or foam won’t dry at the valve. Any material inside the can will not dry or clog the valve.