Improving Atmos Movies with Auro3D: Better Home Theater

[@warriorsharp4608]

This has answered all my questions, I was going to go with in ceiling, now im just going to get some svs prime elevation and go with Auro3D/Dolby Atmos setup

[@fabiobruzzone4625]

In my denon 4700h I don't use too much auro-3d because it doesn't use the rear surround speakers.I love 'em. Without rears I fill like a sound hole behind me. I recently saw the Arren Aronofsky's movie "mother! ", which has a crazy use of rear surrounds, with the sounds that literally moves around you whereas she is turning inside the room or the stairs. I think I'll upgrade to a 6700h reaching full auro-3d 7.1.5 power. In this 4700h 5.1.5 configuration i still prefer Neural-x upmixing.

[@heimkinobinaptikum5229]

Then you have configured something wrong. The Auro-3D decoder in the X4700H/X6700H uses the same DSP chips like the flag ship X8500H/A110. Also Surround Backs of a 7.1 base layout is supported. Only X4400H/X6400H ist not able to use Surround backs with Auro-3D/Auro-Matic, because of the lack of the X8500H DSPs…

[@fabiobruzzone4625]

@@heimkinobinaptikum5229 on my 4700h auro-3d uses 5 ch on ear level, 2 front height, 2 back height and 1 for the top vog (using one of the subwoofer outs) Total 10.1 4700h can process up to 11 ch. To add two surround back, 7 ear level, 4 front/rear height and 1 top vog i need 12 processing channels. 🤔🤔🤔🤔🤔🤔🤔🤔🤔

[@heimkinobinaptikum5229]

@@fabiobruzzone4625 Yes. You have decide between 5.1.5 or 7.1.4, the X4700 has 9 internal amps built in and has 11 channel processing. So you have the choice between the usage of Top Surround or the usage of the Back Surrounds. These behaviour is the reason for upgrading to X6700H, which has 11 internal amps and 13 channel processing up to 7.1.6 Auro-3D.

[@fabiobruzzone4625]

@@heimkinobinaptikum5229 just called my local shop for the upgrade 🤣 My wife's gonna kick me out 🤣

[@pristlehk]

Marantz 7013 is good to go for auro 3d, it has 9 channel and support up to 11.2.

[@joekool5676]

So what movies are in auro 3d or what happens if you watch atmos movie on auro 3d setting on AVR assuming four ceiling speakers are positioned correctly

[@kapooranuj]

Can't see the link to that document of height speaker placement angles etc

[@bmcampjr]

The Denon AVR-3800H also supports AURO3D.

[@kigbeckovic9685]

No matter what Apple supports, it will never fail. On the contrary, it will at least become a standard or a great success. No matter if it's a new technology, a new format or even an old technology brought back to life, it will succeed. It starts with apple music and will actually establish itself in movies. It's just a matter of time. As for Auro3D, who guarantees that if you had only gotten native Auro in the beginning and not Atmos, that the native content would have been mixed perfectly by various studios as well? In my opinion, it's not a question of technology, and the question for me is not whether Auro or Atmos is better, but that very good or very bad 3D mixes make the difference. I would never bet on a dead horse and focus just on Dolby Atmos.

[@themusketeer9458]

How about couch near wall (head 80cm from wall) and 5.1 system with 4 height. I get perfect imaging behind me from the 5.1. Where do i place the heights? Rear above the surrounds (which are placed same as front l/r, or should i place them further to the side to simulate being over a side surround? My surrounds are basically in between a side surround and a rear surround position. Or should i place the rear heighrs more behind me? Simulating being over rear surrounds? I also have a 3m ceiling😅

[@prezodent2371]

To sit between the speakers is the problem , one normally ends up against the wall in a home , a dedicated room for home theatre sure possible but many folks don’t have that I wonder I’d the auro 3d will work if one’s next to the wall

[@J0NN1EWALK3R]

Great video thank you. The auro-3D mixer sounds great, unfortunately I have the denon 3700h and at the time I bought it the censuses talk was Dolby atmos was the cat’s meow. My question is why can’t Dolby create a upmixer and do the same things auro is doing ?

[@MichaelMolinaM]

maybe Auro-3D has a patent on it

[@Reggaebeatman]

They have auro 3D upmix on the X3800

[@thebaoN]

It seems like Auro 3d upmixing is just doubling the ear level speakers, minus the center channel. That is the strong impression I got after hearing Patrick talk about it's strengths in comparison to dolby atmos et al. He keeps going back to not hearing the voices in the height channels as being super important and a real sticking point. Maybe that is the key to good height level immersion, just replay ear level stuff with some minimal height delay. Sure, throw in some object placement atmos magic... which has to also exist in the ear level mix, right?

[@dreyn7780]

You DO need to trust the amplification stacking man. Those sets of amplifiers are well thought out and planned. So you DO need to switch over to 'music' mode if you want a professional sound mix for Rock Concert performance. It really does improve the cymbals and electric guitar and kick drum and vocals as if you hired a Professional sound man to mix the Concert sound. Those sets of sounds are NO joke anymore. Now you get more than 1 experience. You get 5 experiences from 1 source.

[@busterbrown1686]

Auro 3d is a dream. For example I just grabbed Alien vs Predator Requiem 1080p to see if it upmix it and auromatic made it a awesome sounding movie. The sounds coming from the heights was awesome. Rustling of vegetation when the father and son are walking through the forest OMG ! Auro 3d does a head and shoulders better job than Atmos. Star wars IV wasn't doing nothing on a 4k disc. Re watched in Auro 3d and WOOOOW what a difference.

[@FURognar]

Neural-X also does a great job with upmixing soundstracks better than a bad atmos mix, and its more pinpoint than Auro3D. A well mixed movie upmixed with Neural-X can rival a really good Atmos mix in immersiveness. However, there is something special about what Auro upmix does. It makes the sound a lot more enveloping and for some reason, the 30° heights really expands the soundstage depth a lot. So I use Auro upmixing a lot and Neural-X for action movies with lots of directional effects. If a movie is in native Atmos, I play it as Atmos but there are times when I'm tempted to switch it to one of the other upmixers.

[@JS-dh9wh]

Hey Fomo, Love your videos. A question for you. I have a 5.1.2 Atmos setup and I’m thinking this Auro unified setup might be the best of both worlds for me. My surrounds are about 10 degrees behind me with my LTM/RTM (SVS Prime Elevation) about 10degrees in front of my MLP (as per Atmos specs). With the Auro unified setup, should I move them behind in line with the surrounds or are they good where they are?

[@JingoLoBa57]

Too bad I have a concrete ceiling so it’s on ceiling speakers. And I really can’t decide what speaker to use for the vog speaker. For surround speakers I’m using ML Electromotion FX models two front height and two rear height on top of the ear level front and rear pair. Finding brackets to fit into the concrete walls is another problem I’m working on.

[@VoyagerGC]

in regards to 22:30 - I would suggest GoldenEar Super Sat series :) enjoy!

[@subhashchakma9431]

Very nice and detailed videos. Can you please assist me choose a very good tv for watching sports? I prefer Sony and would definitely appreciate if you suggest one.

[@RoboticusMusic]

So why not all 3 worlds, why isn't DTS compatible for an ATMOS/DTS/Auro3D setup? I heard the elevated wall speakers of DTS were nice and worth it.

[@kev3226]

Probably it would infringe on patents?

[@heftyfunseeker9987]

Regarding x.x.2 being a compromise compared to x.x.4, this goes against what I’ve heard from other high-end dealer/installers. The advice I’ve heard is if your room length is 18’ or shorter you should use a single pair, because it will be easier to pinpoint the overhead effects (less congested and confusing reflections off walls and whatnot). Ie I think it’s more a function of the room and not hardware/gear capabilities 🤷‍♂️

[@michaelgodlewski5173]

Have you had the chance to review the New Nakamichi Dragon 11.4.6?

[@joewalter4]

Well done boys I got the Denon 6700H

[@iansteventon4221]

Me too. Absolutely love it !

[@francisburlaud6954]

Lets see if i understand well. You Say that in général, it would bé better to upmix in auro 3d than listening an original atmos track ? Is that correct ?

[@iansteventon4221]

Yes. It's like all atmos discrete audio with added activities. Sounds great

[@TheRealSchnitti]

Hi, what are the other videos with Patrick?

[@uzcateguipedromiguel]

Hi Fomo... I'm very confused with the auromatic mixer. If I'm gonna watch a movie that originally is in Atmos, but I wanna use the auromatic, do I have to set the audio in my blu-ray player as pcm? Or just leave it as bitstream and select auro3d on the receiver?

[@josesimones1312]

Auro on the receiver

[@segaboy128]

Is auro 3d worth it just to have a third up mixer? Im on denon x4300h ; 5.1.4 and enjoy dsu & neural X a lot.

[@stopthefomo]

If you already enjoy it, hold on don’t upgrade!

[@sharathSizZle]

Nah! Auro 3d is not worth it, too expensive. Just too much money for a new format support on your avr as of now you are just buying into the hype created. DtsX, dolby atmos available currently is more than enough. For better understanding let me put it this way example let's say you have avr A with 90w output for 1500$ paying for auro 3d right now is like paying 2000$ for the same avr just so you can get 92w output. The upgrade over dtsx and dolby atmos is not that great as it is advertised and only gives you a slight edge. They are essentially different technology, while dtsx and dolby atmos are object based auro 3d is environment based yet essentially both technology does the same thing. And when you are immersed in a movie I highly doubt you would even notice a difference. 😂 Most people go for a 5.1.4 or 5.2.4 setup so you need a 9 Channel avr to drive them. I plan on a 5.1.4 as it fits the wallet and offers more than enough to enjoy an immersive experience. I was very keen on getting a marantz 9.1 receiver sr6015 it is an expensive receiver costs almost as much as the jamo s8 setup I'm planning on unfortunately it didn't support auro 3d although it is a 9.2 avr although it costs an arm and a leg. Upgrade to sr7015 again a 9.2 avr gives you auro 3d however when you look at the price difference for slight increase in power output and auto 3d it's just not worth it. Regardless of whether content is available or not it's just not worth the premium cost of burning a HOLE in your wallet, it is always a Better idea to invest in excellent speakers than an amp/avr as today technology is tomorrow's garbage. While speakers will last you for a long time you can't really say the same about an avr, tech will be obsolete even is it survives the next few years of usage.

[@skeptical_Inquirer200]

I have been listening for a dozen years to blu-rays with 5.1 lossless DTS and Dolby sound. The room is only about 13x13 feet square and I listen between the two surround speakers which are on the ceiling at about a foot behind me in the corners. My understanding is that I could upgrade the front left, right and center speakers (and AVR) to blast toward the ceiling as well as forward as my speakers do presently. In such a small room, would it make a difference in playing Atmos content? I've heard helicopters from the surround speakers in TV setup videos. I'm skeptical there is much value add in Atmos.

[@valentinkamenov]

Hi FOMO I have Denon X6400H with Auro 3D support. I did so much digging online and still didn't get a clear answer. When I play TrueHD with Atmos and turn on Auro 3D, (like in your video) I can see that as input only the 7.1 TrueHD is active. Is Auro 3D playing the Atmos track from the high speakers, or is only upmixing the 7.1? What exactly Auro 3D is using as source for the upmix? As I said, like in your video, my Denon X6400H is showing me that is using as input ONLY the 7.1 ear level speakers. What is happening with the Atmos track? Is it ignored? Or is also used in the mix for the upper speakers? Thank you for any answers in advance

[@joefawley9264]

Is it the same as playstations 3d audio?

[@jptredhood100]

Patrick Schappert is the VOG 4 Auro-3-D :)

[@Ryand0523]

So I just want to ask, will a 7.1.6 sound good with all 6 heights being in ceiling speakers, as opposed to having 4 height speakers, and then 2 in ceilings around myself. With a vog speaker being in ceiling directly above me. Using Klipsch 8500 in ceiling speakers, though I do realize, the Klipsch speakers can be aimed, a bit.

[@aaronfoor5643]

Aren't there chaeaper avr's that can be upgraded to auro 3d for a fee?

[@brianjackson708]

At 1 hour 3 minutes- great example of Auro 3D Thanks for the tips! Switching to Linear PCM. * War of the World's 💯 *Request - Rammstein in Auro 3d

[@francisburlaud6954]

What i don t really understand IS how to use auromatic ? Truehd or dts + auro3d ?

[@joker927]

Today I enabled Auro3D for the first time and I don't get the hype. It wasn't doing much and Neural:X upmixing produced much more sound in the heights. Actual atmos track produced the least sound. Am I missing some setting? Very confused at hype for Auro3d.

FOMO at the point I'm going to improve atmos by ignoring it 😆 Bought some klipsch speakers and I'm going to focus on making a good staging, and then I need to make that comfy chair I've been talking about. Can't have atmos without a 9.2 receiver if you want dual subs

[@rindershow212]

Any auro 3d movies in the 🇬🇧UK?

[@sal6830]

Can you get it on Denon X4200W ?

[@David25522]

Just subscribed. Great video!!!

[@joekool5676]

So 5.2.4 with better auro but no rear effects or 7 2.2 with better rear surround effects but less ideal auro. Which is better?

[@baronbob6971]

go for 5.1.4 having a good height layer is better than 7 speaker ground layer also the SB channels just get mixed in the S in a 5.1 setup

[@SteveNielsen-oc8br]

Auro shmoro Dolby is tried tested and true. Cheers 🍻

[@StephenAtt797]

FOMO: Just catching up on this one; excellent. Enjoying my new x4700H with 5.2.4, and for now, wifey allowed me to move seatimg 3 foot off rear wall (3 meters from 77" OLED). Was there ever a response to the question about Turbine selling auro 3D to US w/ region 0 (no restriction) discs? I also leave my Denon on Auro 3D for anything that's not native ATMOS or DTS:X - even my over the cable content - no feedback/ no harm, sometimes there's immersive sound.

[@Blessindisguise]

One thing I want to understand is does it introduce anymore input lag in gaming if you connect the device directly to the receiver

[@Suspicious0ne]

Technically yes, but I doubt you'll notice the differences. Unless you are doing tournaments I wouldn't worry. Even then you should be playing on a high refresh monitor with wired a headset to minimize input lag. I use Astro A40TR's for gaming with Dobly Atmos software. Really good entry level Atmos headset. Very few games won't work with the Atmos decoding, when they don't, they really don't(ie Escape From Tarkov).

[@Ryand0523]

Can someone repost the link to the John Williams in concert movie… the one posted in the description doesn’t seem to work, and I can’t seem to find the proper edition of the movie/concert when I look for it myself.

[@heimkinobinaptikum5229]

Link was now deleted for the third time… Please check for the All Region Blu-ray, John Williams: Live in Vienna, on Amazon, Number B08NVDLLX1

[@heimkinobinaptikum5229]

Link was now deleted for the third time… Please check for the All Region Blu-ray, John Williams: Live in Vienna

[@mcloude1]

so with the audio formats whats the best Hz settings for speakers. like 80 (HZ) THX

[@rick330]

Its still 80hz if you have a sub. Maybe if you have huge towers 60hz.

[@rick330]

@Wayfaerer yeah 99.9 percent of the time 80hz is the lowest you should go unless you don't have a sub. What wayfaerer said is basically identical to what I said right as the stream was ending in chat. No matter what wattage your AVR says it is it only has so much power it can output at one time and if you set your crossover too low it's using much more power to produce those sounds that you'll be getting worse sound overall while your sub has it's own power and should be handling everything everything below 80hz which frees up headroom for the AVR to produce much better dynamic sound through each speaker because it has more headroom. Also most humans can't localize sound 60hz or lower so there isn't a point to have your speakers handle that anyway. If that made sense. I'm half asleep typing this.

[@mcloude1]

Ty everybody just was asking cause my onkyo tx-nr 797 auto speaker sets my klipsch rp-8000fs lower then 80 sound is still good but will set them to 80hz And I think the surrounds the same or 100-120hz thought I seen that some where unless that was for the height speakers

[@rick330]

@@mcloude1 yes the AVR calibration will set your speakers lower. I know it sounds odd but you have to ignore that. The speaker calibration is still beneficial but just change your crossover to 80hz after it's finished. Unless you have tiny 4in speakers then you want it even higher than 80hz.

[@gondolier41413]

@@mcloude1 I second what Rick says about ignoring Audyssey crossovers. It sets my rear speakers which according to htd only played out a 90 HZ to like 40hz.... They are near a corner so that might be why it's placing them so low but I cross them over at 100 Hz. It takes more power to drive your speakers at lower frequencies so when you set higher crossover points on your AVR you can let the subwoofer and its internal amp to the heavier lifting giving your AVR more headroom

[@josedomin1]

how and where can i buy Auro-3D movies?

[@bearclaw5115]

Import from Europe. As I understand it, here in the states, the value in auro3d is the upmixer used on 5.1, 7.1, or atmos tracks.

[@mattpipke5716]

FOMO, The X3700h does support 9 channels and 11 with an amp, you can run 7.2.4 with the X3700h, I have one set up that way now. Auro 3d is not worth 400.00 The X3700h was 1100.00 shipped, the X4700h is 1500.00 shipped. To me, the 400 extra for Auro 3d isnt worth it, I guess if money was no object sure, but I Was on a budget and had to strip this as thin as I could, so for me to get the speakers and subs, it had to be the Denon X3700h.

[@rick330]

I think you're in great shape matt. I have the x3600 and I run an amp to power my front stage in my 7.2.4 setup.

[@gondolier41413]

@@rick330 did you notice an improvement in audio clarity and/or dynamics when adding an external amp to the 3600h?.... I've been torn between buying an external amp or a second sub

[@rick330]

@@gondolier41413 for me it did. It I also run 11 speakers. So taking the front 3 away from the demon and running a dedicated 140w per channel amp for the front stage was beautiful. 2nd subs are also a huge benefit though. I can't make up my mind which is more important. I'd say if you're running your system at very high volumes the amp would be my pick.

[@roman2011]

Fun talk. Thank you.

[@frankgyure3154]

There seems to be total confusion with all the Dolby formats and that is just Home Theater/movies. How many people will be able to reformat their listening areas to include the added speakers especially ceiling speakers. Obviously if you are just starting a dedicated HT room and build in-wall wiring/speakers. Dolby Atmos as to music is even more problematical. There seems to be a significant amount of disability. Also,listening to hi-res lossless music through the various streaming services is even worse. It needs huge amount of additional dacs,extra phone dongles to possibly think you are getting hires lossless.

[@1Aquadon]

After 1 year owning the Sony HT-A9 system ( pretty much the most expensive theater sound speaker system of 2021-2022 - WITHOUT a dedicated receiver) since they do not allow you any control over the (atmos bounce speakers) I consider this a NO BUY unless they fix this. Any Atmos via ceiling bounce is a joke.. imho. Especially at $2500. For Psudo 5.1 though the sony sounded nice (and wireless works for many ) . IMHO better to buy a modest HDMI 2.1 Receiver now. Spend big money on your bed layer speakers because you can/will have these for many many years. ALSO Do your research that the product line of speakers you buy also has an atmos height or ANGLED-atmos in ceiling for timbre matching (something you will be very sad you didnt do later ).

[@gondolier41413]

Watching this using my 3700h and 4 in ceiling down fire speakers 😭

[@SansoneDPM]

So if I have a Dolby Atmos set up 7.1.4 (4 in ceiling speakers) then all I have to do is change AVR configuration to front and rear height? But I would also have to move my ceiling speakers further away from me even though they are firing down and not towards my head? That doesn't sound like it would work well.

[@Professor5180]

yes, but also have them angled 30 deg if they are capable.

[@nogoodkeister]

What did you end up doing? Are you happy with it?

[@SansoneDPM]

@@nogoodkeister I winded up leaving them as is and as recommended by Dolby. My ceiling speakers cannot be angled 30 degrees and I'm content with my Dolby Atmos set up for now.

[@nogoodkeister]

@@SansoneDPM I’ve been battling what config to go with. As of now im going to settle on 4 in-ceiling speakers placed at 45 degrees. I don’t like the idea of upmixing. I want to hear a movie the way it was intended. If that means the atmos speakers only get used every now and then so be it.

[@santiagoramirez7230]

Good info!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Thx

[@michael-4k4000]

Just be happy

[@michaelwyckoff7593]

Missed this stream. I will catch up

[@rick330]

I do that often. Today I was eating with one hand and helping my kid with the other all while trying to chat. Sometimes I just can't watch until later.

[@michaelwyckoff7593]

@@rick330 some times they are having a livestream or putting out a video and I am not aware of it so I just catch up when I can. No sleep lost because of it.

[@Miskatonik]

ONCE AGAIN: Auro3D does not output more than 5 ground speakers in a 7.2.4 configuration, 2 ground channels will be silent. This has been proved again and again. You need the Auro3D Pro version (for 13 channels) that only the Denon 8X series have. I own a Denon X6400H (11 channels) and Auromatic will only output 5.2.4, which is VERY frustrating and the reason why I never use Auro3D (I default to DTS:X). BTW, I just checked and I do NOT have that Movie mode under Surround Parameters in Auro. I have Small, Medium and Large. It must be something new that, as usual, never got updated.

[@grobitv]

4700 and 6700 is supporting this 7.1.4 Layout. You need only additional amplifier.

[@Miskatonik]

@@grobitvVery sad, then, that they didn't update the Auro3D version in previous years AVR receivers, it's basically a useless format for me if I can't use all my speakers. My X6400h is a very good unit and don't have any need to replace it whatsoever just for the updated Auromatic :(

[@grobitv]

@@Miskatonik it’s technical wise not possible. the dsp hardware is not supporting this format.

[@Miskatonik]

@@grobitv Thanks for the info 👍

[@heimkinobinaptikum5229]

@Malleus Maleficarum You can use Surround Backs with the AVR/AVCs with the advanced DSP chipset of the Denon X8500H/A110 or Marantz AV8805. So Denon AVC-X4700H and AVC-X6700H are supporting 7.1 base layer with Surround Backs. Same for Marantz SR7015 and SR8015. But for the X4700H you have to choose between 7.1.4 and 5.1.5 (with usage of an external stereo or mono amplifier) 7.1.5 is NOT possible with X4700H (9 internal amplifier and 11 channel processing)

[@dreyn7780]

But its impossible to change the pitch of these sounds. For example, when you're in the cinema for James Bond moonraker 1979, you'll hear a slightly bass tone version of roger Moore's voice. Its tone was shifted lower by the equipment. The red lazer DVD changes the pitch tone again to even lower than the 1979 experience. But it seems reasonable to fool our brain that its a real original experience. The 2010 Blu-Ray sounds have shifted to more lower tones than the low pitch tone of the DVD sound. This extremely low pitch tone doesn't even sound like roger Moore's voice. The piano is played during the movie and all those sounds are too low in pitch, it sounds like a bass piano. My brain switches over to record mode instead of fascination mode cause its decided I've never experienced this version before. So you go Blu-Ray and everything lowers in pitch and its not the original cinema experience. Its some horrible bass tone version.

[@rick330]

Wow it's hard to keep up and help everyone. If anyone needs help I'll give my Twitter and answer. I'm a former installer and consider myself an expert for the last 25 years. I don't want anything I just like helping because it's my hobby and I like helping people experience what I get to experience.

[@monstalova]

Can you tell us your fav movies for audio?

[@rick330]

@@monstalova lol I meant more technical setup questions because since my toddler was born we haven't watched a movie but...I agree with fomo on ready player 1. For what I've watched that made my jaw drop more than anything else.

[@monstalova]

@@rick330 yeah I know but I already have a setup :) I have ready player one because everybody said it was so good for Atmos. I was a little underwhelmed, that it was very good in the action parts but most of the movie there wasn't the immersive sound using all speakers. I guess most movies will have the big action set pieces but ignore other scenes for ambience and surround effects.

[@rick330]

@@monstalova hmm I see what you're saying. I'm so behind on movies it's silly. My kid is a handful. I just game every night because I like to watch movies with my wife and we can't with the crazy child.

[@Cigma-e7w]

Fomo I think you should try black hawk down. It has a great mix also. Watched it the other day on my 5.2.4 system, it's glorious!

[@LarryPutski]

My God home theater is very complicated

[@dreyn7780]

Sound bars can play ordinary sounds. But some sound bars can put sound into the air in front of the tv speakers and a new type of sound emits from the tv speaker and that hits the sound bar sound in mid air and that gets smashed towards the viewer. Its like a tennis ball serve. The ball gets thrown into the air and the racket hits the ball at the other player. Other sounds get shot to the ceiling and bounce downwards. I have 3D room like sound of your KZbin video. THEY know reverberation room sounds. THEY learned from the electric guitar world. THEY learned what works and what doesn't. THEY learned to stack the amplifiers 1 after the other. Now the electric guitar world is learning what to do from the tv world. In amplification, if you ' have a win' you must loose something. There's always a price to pay. Blu-Ray lowers sound pitch and there's nothing you can do to stop that happening. You got more colours but ruined Roger Moore's voice. Are you prepared to sacrifice sound pitch for extra colours?

[@djedi2012]

ready player one? really ? i mean it can have good sound if it's a sh.... movie and it is and nobody wants to watch it .... its a movie for 5 year olds