Straight Pipe Exhaust Vanguard V twin

[@techandotherstuff7669]

yo mama was so small she lived in one of the porosity holes for real i like the videos you make

[@Biokemist-o3k]

Oh yeah Neil!! I would have thought you would have been under a foot of snow by now. I am so glad that everything is going well for you. I finally recovered from getting run over on may antique Harley by a F350 and having my leg nearly crushed off. I am able to walk without assistance and most of the blood clots are gone. I finally decided I was not going back to my job at Big Pharma and starting a small engine repair/rebuild/restoration business spec dialyzing in engine drive welders. I already have so many I am swamped and could use an apprentice....You inspired me to start videoing my work and builds. Hi John its great to see you acned your dad work so well together.

[@jeeper426]

"its a lawnmower not the space shuttle" gorilla welds are great for projects like this, they don't have to win any beauty contest, they have to be strong enough to do the job, and you adapted to the situation, overcame the obstacle and got er' done, also, that little vanguard sounds sweet with straight pipes, cant wait to see er' choochin' under her own power and moving some snow for ya'

[@ashtonbatterson5309]

Wish I had a dad like you in my earlier years

[@WallysPlace66]

Nice. You can brush acid on the areas that you want to weld. It will eat all of the galvanization off and your welds will look sweet.

[@Vein1986]

U have used citric acid mixed with vinegar and stuff to remove scale from toilets. Dump anything's zini coated and within a minutes it will dissolve zink, but not too long cause it will attack steel

[@WallysPlace66]

You can use phosphoric acid or muriatic acid

[@hacxer8424]

Acid dip all of it the galvanizing coating burns off and it stinks and it's very bad for your health

[@WallysPlace66]

@@hacxer8424 Needs to be done outside

[@Jaredisking1023]

This is one of the coolest things I’ve ever seen😮

[@1SmittysGarage]

Nice!! I dig it! Spot on there! Everything isn't cookie cutter.. can't be afraid to adapt and modify! Great video! I was thinking of something like this for my yard tractor but wanted them upwards with tink tinks. Blessings and respect!

[@J_Beazy223]

Love my cub cadet 2500 series. Im an electrician and have been using emt for so many projects. Emt is easy to work with. Although the price has quadrupled of the last couple of years i save everything i demo from jobs and keep it for the small projects. Used 3/4 emt for my exhaust on my predator 212 golf cart conversion. Needs a muffler now though. Its so loud! You need to sand off the galvanized coating. Makes the welding cleaner

[@sandys9791]

Lawnmower handles make good exhaust pipes for smaller motors. They have a fairly tight radius 90 degree bend.

[@HipaStore]

Awesome exhaust system you built.

[@subixbarbarasson6052]

♪ Two trailer park welds go round the outside,... Round the outside..... Round the outside ♪

[@Tony-rl2fr]

😂

[@rangeraficionado87]

I wish I could see all of those governor linkage controls/rods/springs up close. Mine is all cobbled together from vertical and a horizontal shaft engines and I'm really fighting getting it correct. I'm so close though.

[@lloydbaker7099]

Yo mama said son you put those welds on KZbin

[@mooky4206]

No way he just started to 2 step his lawn mower that’s crazy

[@liljoeii6091]

No I like your videos cuz you do know what you're doing I'm learning so I come to you for answers I've been watching you for a good while now and I love your videos so I've learned a lot up from you and I appreciate everything you've put into your videos and when you and John are doing a video that even makes it more special and with your girlfriend too making a videos

[@rollbot]

yo mamma taught me how to weld and I still can't lay down lines and pipe that look as good as this.

[@thedriver02]

Frig yeah, using emt is quite doable. I like the idea of using those big washers. Sounds good!

[@warrenfloyd1484]

Nice fabrication!!👍

[@donwiley1055]

Good job keep up the good work can't wait for the next video

[@robertmailhos8159]

A custom exhaust system that is home bulit yeah buddy 😎👍

[@twistedvtwingarage7260]

Looks good man and sounds good. Nice work.

[@redneckcomputergeek]

Thank you. Getting back into more of the DIY stuff and experiments as the winter sets in.

[@wildbill23c]

Its not bad if it works, and it works, so its a plus. Why spend a ton of money when you don't have to, work with what you have and what you can get cheap. May have to weld on the exhaust a few times due to vibrations those welds may not hold long, but its a great start for sure. More importantly it'll push the plow when you need it, who cares how the exhaust looks its a working tractor not a show piece.

[@redneckbryon]

I know you want snow and your pond freeze over, but do you wish you had what Buffalo got, a few weeks ago??

[@6.7fromheaven51]

I’m in buffalo and it was not that bad. All my contracts needed 2 plows and was all set.

[@timkis64]

your right about the left side exaust.if i was going to do all the work, id try a 2 into 1 to help with scavenging as well.

[@thensh1tguy]

Looks pretty good 👍🏻

[@edrushford7773]

It's simple and Sounds good 👍

[@starpuss]

*Should make a pretty good plow Tractor!* Redneck Exhaust Works pretty Well!

[@johnconnell1424]

Looks awesome 😎 to me love the sound

[@philliphall5198]

Cool stuff. Wild wings

[@Ajallday1010]

Just a helpful tip, you may want to up your fuel just a hair since you increased your air flow

[@lawrenwimberly7311]

welding galvanized makes for crappy welds... I try to grind through the zinc where I intend to weld

[@PullerbearEd]

That turned out great. No your mama jokes here because those welds look just like mine when I weld galvanized stuff.

[@caseybinion806]

Awesome gave me some ideas 😎

[@Mopar-Pioneer]

Damn that things souunds good !!!!

[@lawrenwimberly7311]

I have used EMT since the 80's... (For ridiculous fender flares and fiberglass widebodies... aluminum window screen skin followed buy a Lotta fiberglass)

[@warrenvalentino5763]

Great video! Awesome project! :)

[@KingDavidofamerica]

It sounds good

[@mrmoosecreature]

How'd you convert it to a horizontal shaft, or did it come that way?

[@austinglennkimmel8719]

I recently broke the old Tecumseh peerless 5-speed in my huskee looking to put a 6-speed in it any good recommendations shifter is in the center between your legs

[@Helge198]

Galvanised makes cyanid when welding on it. Strongly recomend u to grind it off before welding it will kill u

[@TransAmDrifter]

Gosh, I should be dead hundreds of times then. As a welder.

[@randymcm7493]

Why not a 2 into 1 exhaust

[@jamesraddatz2613]

Nice job!

[@hacxer8424]

You really should weld In some of the threaded mufflers on so it's not obnoxious

[@katyair1]

Nice job on your exhaust system, now let's get to the mama joke. if your mama was a welder,, well let's just say you're NOT! 🤣✌

[@michaelfarris2556]

Shit I think it sounded bad ass that way.

[@PatrickBaptist-vv2bg]

I call it shitmas, and Im so glad it's over for another 11 months whoohoo

[@Bascket_lorax]

You can put two engines on your tractor the same

[@s.w.m2148]

Just letting you know you have an exhaust leak on the left side on the motor probably just needs one more tak weld

[@Redneckmowers]

Haha looking good

[@Hjt892]

Put a 90 on it going out the hood

[@jeremyrock9305]

Sand the galvanized off welds alot better

[@boduke2746]

👍

[@bobbyboucher5309]

Where's the turbo?!