Briggs and Stratton 24HP V-Twin Full Carburetor Cleaning

Рет қаралды 15,617

Күн бұрын

Пікірлер: 14

@Lionel17070 2 ай бұрын

I have the exact same engine, and exact same problem. I really didn't feel like doing all this work to fix the problem so I decided to just try something out. Took the air filter out and while the engine was running, I sprayed "kleen-flo choke and carb kleen". Engine started to run smooth and seems to have solved the problem. Took me a minute or two. I just hope the fix will last. Will let you know. Took me a minute or two,

@JLPicard440 2 ай бұрын

That's excellent! Great fix. It would depend on the level of goop in the carburetor. Glad you got it going again.. 😊

@superbee1018 5 ай бұрын

easy to follow, clean video, quick and informal. Love it all.

@JLPicard440 5 ай бұрын

TYSM for the great input and feedback. I really appreciate it.. 😊

@martynkings5504 4 ай бұрын

Excellent production - straightforward presentation. Tips re: locktited bolts - invaluable imho also the use of 4mm socket if torque spanner n/a. Thanks so much

@JLPicard440 4 ай бұрын

TYSM! You're welcome... 😊

@154263ir 2 ай бұрын

Very good explanation! God bless you!

@JLPicard440 2 ай бұрын

Thanks, you too!

@GaryZahn 3 ай бұрын

I'm not a small engine repair kind of guy at all. I talked to my friend in MN who does work on small engines and explained the symptoms of my mower and he said the float was probably stuck. So, I watched your video and was able to take the carb off as shown and found my float was indeed stuck. My friend said that as the float raises it pushes a "needle" into an orifice to cut off the gas flow. I didn't see a needle when I took the bowl off and pulled the float assembly apart. I do however see a plastic plunger move up and down with the float. Has that replaced the needle, or did it fall out as I took the bowl off? Cuz there's no needle on my workbench and I can't see one in the assembly. Excellent video by the way!

@JLPicard440 3 ай бұрын

HI ... that plunger is the needle... 😊. Sometimes they have a rubber tip and sometimes it's all metal with a rubber insert into the hole that it goes into... Either way it serves to cut off fuel as the float raises and puts pressure on it. Hope that helps...

@jeffbrownell279 6 ай бұрын

Helpful for sure.the white float bowl piece refuses to come out of my float bowl.Also what does the solenoid in the float bowl do?

@JLPicard440 6 ай бұрын

I think it cuts the fuel on and off... I've heard it called an anti-backfire solenoid as well... Try soaking the carburetor in some cleaner. That float bowl should come off without a lot of effort.